[Q] MK802 stick powers down after boot 2nd logo - Android Q&A, Help & Troubleshooting

Hello,
I wanted to test plugging the MK802+ (clone A10s) to my computer and starting LiveSuite WITHOUT choosing any firmware.
I pressed the reset while plugging the MK to USB.
Nothing much happened, except light flashing on th MK802, closed LiveSuite and powered down the MK802
However, now, unit starts booting, green screen android, then black screen android logo, then powers down....
What can I do?
It's a fake A10s MK802+ like device.
Thanks,

Related

[Q] Locked Aoson M30 - Won't boot

Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quaƱity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.

[Q] Android tablet not booting up

Hello everyone,
I recently received an Innovatek Inno Pad 10 (chinese android tablet) as a gift and the problem is that the tablet does not boot up. When I got the tablet and turned it on, it showed me an android bootloader screen and then it brought me to the android logo boot screen where it would basically go into an infinite boot sequence. I have tried charging it fully and then turning it on, I have tried un-plugging the battery and plugging it back in. I even tried re-flashing the firmware on the device using a software supplied by the company (it was very hard to find and the company's support is not that great). The flashing process was completed successfully but the tablet would still go into an infinite boot loop (I even tried re-flashing it again with no luck). Here is the worst part, there was a u-boot-nand.bin file included with the program and I decided to try and flash the tablet using that file. Now the tablet's screen won't even turn on, but the power and charge buttons still light on. I think the bootloader got messed up. Does anybody have an idea how to get this tablet working? I have posted pictures of the tablet and its specs.
Thanks
John

[Q] Bricked JiayuG5 (MT6592), help needed!

Hi folks!
I was trying to flash a new recovery mode for my phone, which resulted something like brick: the phone boots but nothing happens, the screen is black, but it emits light, when i plug it in to the computer it is recognised as PCI Simple Communications Controler. It doesnt boot into factory mode or recovery mode. The diod isn't lit when I'm charging it. I'm clueless and hopeless, I'm counting on your help!
EDIT:
Fixed, I reflashed the whole firmware and it worked wonders

[Q] A kind of bricked Xperia Sola

Hello guys, my friend was installing some ROMs (jumping from one to other) and he probably accidentally installed wrong ROM.
System loading is in bootloop and then it came to empty battery. Connecting charger to wall charger first shows red LED light.
Then, when red LED disappears, phone immediately starts appearing SONY logo, then XPERIA logo and loading system that can't be loaded because system is in bootloop (since it is wrong ROM) and battery is too low for it (phone is in bootloop max 15 seconds). Phone start itselfs!
That's not even enough to install drivers in Win 7. Power + Vol+ does nothing. Holding Vol- and connecting USB to PC does nothing. I wanted to flash stock ROM via Flash Tool but I can't boot phone in Flash Mode. I am holding back key at phone and plugging USB cable but It does nothing except "trying" to install drivers that cannot be finished because phone is shutting down too fast.
Xperia Sola
Okay, got enough time to flash custom kernel via fastboot. Flashing went successful and kernel works. But something is still wrong.
If there is enough battery, kernel should boot up to show battery charging screen.
My screen shows SONY logo with blue "Custom" text, then XPERIA logo and then it boots system that can't be booted without enough battery.
Why didn't kernel start battery charging screen after charging enough to boot kernel?

HIMEDIA Q10 Pro Bricked after firmware upgrade - help!

I have a Himedia Q10Pro Android box that has been bricked by a firmware update. I followed the instructions (FAT32 drive, only update on root of drive) I was performing the firmware upgrade from 1.0.8 (Android 5.1) to 2.0.1 (Android 7) very carefully as instructed by the post in the forum, box is in a cool equipment area, fed from a clean UPS for power. Got the Android upgrade screen, progress bar was moving. Stepped away to help my daughter, and when I came back I was at the HIMEDIA boot screen. Left it to boot.. and waited.. and waited. Wouldn't go past that boot screen, left it a couple of hours. Then powered off and then back on, still stuck on the boot screen (says boot on the LCD display too).. left it an hour again, no go. Tried leaving it unplugged overnight (clutching at straws!).. no change.
I've tried the upgrade again, when pressing the upgrade button, the LCD changes to 0000, but still displays the HIMEDIA logo and no activity light on my USB thumb drive. Tried several thumb drives, all 3 USB ports, several firmware versions (including the 1.0.7 as suggested), and every combination.. no dice. Stuck on 0000 on the LCD and Himedia logo on TV if I've used the upgrade button.. stuck on boot on the LCD screen and Himedia logo on the TV if I haven't. There is a guy in youtube (can't post links yet, search 'Himedia Q10 pro bricked after upgrade to hmd2.0.1') who seems to have the exact same problem.
Any suggestions gratefully received.
Thanks
Does the power button blink red and white?
The same problem
The USB does not respond to a any USB flash disk
The same problems.. Guess it is bricked.
Bleh_KR said:
The same problems.. Guess it is bricked.
Click to expand...
Click to collapse
Solution..Open box -contact with rs232 an try with puty...Are work - stop elec. when open driver usb..

Categories

Resources