[Q] Bricked JiayuG5 (MT6592), help needed! - Android Q&A, Help & Troubleshooting

Hi folks!
I was trying to flash a new recovery mode for my phone, which resulted something like brick: the phone boots but nothing happens, the screen is black, but it emits light, when i plug it in to the computer it is recognised as PCI Simple Communications Controler. It doesnt boot into factory mode or recovery mode. The diod isn't lit when I'm charging it. I'm clueless and hopeless, I'm counting on your help!
EDIT:
Fixed, I reflashed the whole firmware and it worked wonders

Related

[Q] Vodafone Smart II probably bricked

Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A

Stuck at bootloader after water

Hi,
my Xperia SP got under a stream of water recently, and since then I've been fighting to bring it back to life.
I had a problem with the hard power-off button being constantly in pressed state, but I fixed it somehow.
Right now I am able to access fastboot and flashmode, however the phone gets stuck at the bootloader screen when I try to turn it on (kernel recovery isn't accessible, leds don't light up).
One weird thing I noticed is that when I just plug USB to the phone, instead of going to "charge-mode", it just enters flashmode?
I tried re-flashing the kernel, and the whole ROM, but it didn't change anything.
Is there anything else I could try?
Any help much appreciated.

LG-T385 flash stock/unbrick help

can anyone help with unbricking lg-t385? friend gave me the phone saying it just turned itself off and after that it doesnt work (as always, nobody touched anything :/ )
when turned on it hangs at LG logo, if i remove the battery and connect it to pc the same happens although by the plugged in sound on the pc you can tell that the phone is connected, it even shows up in device manager. if you remove the battery and plug in a wall ac charger the same happens, phone turns on and hangs at the logo. tried pressing all the combination of keys to get to recovery or hard reset. nothing works.
flashing, rooting, unbricking etc is not new to me, but this is my first lg and first non android phone for that matter.
tried flashing with LG Mobile Support Tool without luck cause it doesnt recognize the phone.
can someone please help, or just point me in the right direction as to how to reset it to factory or flash stock?
thanks in advance
nobody?

Real messed up, no simple solutions, [help] me out.

So first off, here is what i know about my device.
Samsung Galaxy S4
SCH-I545VRUGOC1
I installed TWRP because i guess i had no idea what i was doing, and locked myself out of my recovery mode, then tried to fix that by flashing the stock rom which didn't work either.
when booting this is what happens.
Recover - Nothing
Odin/Download mode - Works.
Power only - boots to black screen that says "Samsung Custom OS" then the screen turns black, blue LED comes on and it doesn't restart or turn off, it just seems to be frozen. (I expect this is because i've attempted to flash multiple times thinking the issue was my cable connection)
no idea what to do now, can't boot can't think straight since i've been at it for hours finding things on these forums but nothing seems to work through odin.
Can't download VZW Repair assistant (no online link, and phone wont recognize through my pc)
samsung kies wont recognize it either.
Help?
Need any info, ill be at my computer for a few hours trying to hash this out.
-Don't care about my data on the phone, it's replaceable.
Thanks.
Fixed it Via SmartSwitch
Was able to recover all of the aforementioned.

[HELP] Bricked device. Run out of ideas.

Hi all, first of all I'd like to apologize for my dumb questions (if I make any) and for if I'm posting in the wrong place, kinda new in here.
I explain my situation: I had a hardbricked X820 (I don't remember how it got bricked because it was like one year ago but I think it is a matter of hardware because I think I remember it fell off from such a high place, don't know yet and that's why I made this thread) and I followed quite a lot of guides (A LOT) and it seemed that the only working method was using FlashOne tool with QFIL files. It seemed everything went well until it finished the flashing process. After booting up the device it happens nothing, and sometimes I see the booting logo of LeEco followed by what it seems a shut-down with blinking red led. It sometimes aswell appears the blue led when booting into system and also when trying to boot to recovery. Fastboot mode works fine btw.
I have already spent more than 20 hours trying to fix this, but all I got is:
- device can already boot after following this guide (before I got nothing but red led light when trying to boot)
- device boots but wether:
It stucks in the booting logo
screen turns off and blue led appears
screen turns off and a blinking red led appears
- can't boot into recovery, even by booting an image from fastboot mode. Recovery booting screen doesn't even display and blue led appears again
- fastboot mode is fine and the device is recognized by the computer
I first thought it was that some hardware was causing the issue because of the fall but after seeing it can communicate with the computer and boot into fastboot mode I don't think it's a matter of hardware... But still I wanted to consult you expert guys
I'm a bit fed up and out of ideas... What can you guys come up with? I really need help. I'm completely stuck.
I might have (for sure) forgotten to give more relevant info so don't hesitate to ask!
Thanks a lot in advance!
If you like you phone and If nothing work, I hard brick a kindle fire 6 hd and replace the motherboard that I found for cheap and the tablet is back and working like new.
MikeViller said:
If you like you phone and If nothing work, I hard brick a kindle fire 6 hd and replace the motherboard that I found for cheap and the tablet is back and working like new.
Click to expand...
Click to collapse
That's a good idea! But I've been seeking cheap mobos and I can't find any... I'm very poor and I can't afford buying new hardware for a device I'm not using daily, that's why I wanted to know if the issue was about hardware, something I see clearer every time... :crying: :crying:
didiloro said:
Hi all, first of all I'd like to apologize for my dumb questions (if I make any) and for if I'm posting in the wrong place, kinda new in here.
I explain my situation: I had a hardbricked X820 (I don't remember how it got bricked because it was like one year ago but I think it is a matter of hardware because I think I remember it fell off from such a high place, don't know yet and that's why I made this thread) and I followed quite a lot of guides (A LOT) and it seemed that the only working method was using FlashOne tool with QFIL files. It seemed everything went well until it finished the flashing process. After booting up the device it happens nothing, and sometimes I see the booting logo of LeEco followed by what it seems a shut-down with blinking red led. It sometimes aswell appears the blue led when booting into system and also when trying to boot to recovery. Fastboot mode works fine btw.
I have already spent more than 20 hours trying to fix this, but all I got is:
- device can already boot after following this guide (before I got nothing but red led light when trying to boot)
- device boots but wether:
It stucks in the booting logo
screen turns off and blue led appears
screen turns off and a blinking red led appears
- can't boot into recovery, even by booting an image from fastboot mode. Recovery booting screen doesn't even display and blue led appears again
- fastboot mode is fine and the device is recognized by the computer
I first thought it was that some hardware was causing the issue because of the fall but after seeing it can communicate with the computer and boot into fastboot mode I don't think it's a matter of hardware... But still I wanted to consult you expert guys
I'm a bit fed up and out of ideas... What can you guys come up with? I really need help. I'm completely stuck.
I might have (for sure) forgotten to give more relevant info so don't hesitate to ask!
Thanks a lot in advance!
Click to expand...
Click to collapse
Follow this guide using pc
https://www.google.com/amp/s/www.******.com/install-twrp-root-le-max-2/amp/
Once your phone booted into twrp recovery, your phone is alive.
Download twrp 3.2.3-1-x2 and custom rom and save in otg drive for recovery flashing.

Categories

Resources