I do have a Mmx A50, after searching i found a custom ROM JetMod3.0 , but since I don't have CWM for it I can't flashh the ROM into my cell.
If someone can help me with it , I would appreciate that.
Hey I dont kno if you still found the answer...but just to let you know varun.chitre.15 had created a cmw recovery for mm a50 and jetmod
Sent from my Micromax A50 using xda app-developers app
CWM Recovery on MMX A50
Vika.sharma said:
I do have a Mmx A50, after searching i found a custom ROM JetMod3.0 , but since I don't have CWM for it I can't flashh the ROM into my cell.
If someone can help me with it , I would appreciate that.
Click to expand...
Click to collapse
Use SP Flashtool for install the CWM into A50 then after put the JetMOD.zip file into the root of your SD Card, and boot the phone into recovery mode, Wipe Data, wipe Dalvik Cache and then browse your zip file and its done
SP Flashtool and CWM recovery.IMG file is available on net downlaod it and Do IT.
SAY THANKS IF THIS POST RELATES TO SOLVE YOUR PROBLEM:highfive:
Hi, i am having celkon a97i. which i already rooted using srs installer.
but the problem is now that i can't install the rom manager... cwm
tired of trying everythng...and now getting what to do what i did... just not getting what to do for the next step so that the cwm can get installed.
when i am not getting anythng at last doing this post in a hope that xda experts will help me as they do's everytime to everyone.
please help me with an easy and fast method to install this cwm.
waiting for an xda angel to help me out.
check my thread for the fastboot post. find a custom cwm recovery image. then use terminal to boot into fastboot and flash it.
http://forum.xda-developers.com/showthread.php?t=2314836&page=22 post #214
hi guys;
i have a dead mt6582 phone (Condor C5) i tried to install the rom i downloaded from the officiel website using SP Tools
all went great but the phone still in a boot loop .
i dont have access to download mode so i tried flashing a costume recovery (CWM) & installed a several costume roms (zip) but none of them worked & the phone still in boot loop
any help is appreciated .
Have you ported this roms or they are already for your phone ?
hossam55 said:
Have you ported this roms or they are already for your phone ?
Click to expand...
Click to collapse
the rom i used with SP Tool is for my phone & i think the others too but how do i port them if they are not?
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
hossam55 said:
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
Click to expand...
Click to collapse
if u mean wipe data & factory reset i already tried that & didnt work
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
hossam55 said:
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
Click to expand...
Click to collapse
i did that in the first time ; flashed it with a stock rom downloaded from the officiel website of the phone using SP Tools & all went great but the phone still in boot loop
is there any other way??
That is all i know
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
arshad145 said:
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
Click to expand...
Click to collapse
i tried all the rom's from mtkroms.com i ported them but still didnt work
i tried flashing boot.img only from stock & costume rom's & again no success :crying:
is it possible that the problem is from the hardware not software?
Can't be hardware issue if you succeeded to flash via spft
---------- Post added at 21:53 ---------- Previous post was at 21:53 ----------
I guess I can't help anymore Sorry ...
thnx for all the replies but i still cant fix the problem
is there anyone who knows another way plz help
Hello everyone,
I updated to the latest version 6.0.1. 572
I also unlocked the Bootloader and rooted with King root (Temporary root)
But what I can't boot to the stock recovery, and whenever I try to, it automatically boots to system
And I tried to install twrp, I ended up getting it soft bricked and I had to reinstall lastest firmware
So, is there any way I can install a custom recovery?
Thanks
Do not use standalone recoveries at the moment. Use ROMs that has recovery else you'l end up in bootloop.
For now, rcovery fix is an issue with 6.0.1. So i suggest you simply stick with a ROM like Existenz MM V1 or any other, by downgrading and installing recovery with root AND then flashing 6.0.1(with recovery & root). That way you can have recovery.
I too am waiting for a recovery fix so just managing without recovery for now as non of the fixes are working for me.
Good Luck buddy!
XDA
"Xcites: Develop: Achieve"
---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------
Or...
Use a custom kernel.
You will have recovery and much more.
XDA
"Xcites: Develop: Achieve"
nagaGuy said:
Do not use standalone recoveries at the moment. Use ROMs that has recovery else you'l end up in bootloop.
For now, rcovery fix is an issue with 6.0.1. So i suggest you simply stick with a ROM like Existenz MM V1 or any other, by downgrading and installing recovery with root AND then flashing 6.0.1(with recovery & root). That way you can have recovery.
I too am waiting for a recovery fix so just managing without recovery for now as non of the fixes are working for me.
Good Luck buddy!
XDA
"Xcites: Develop: Achieve"
---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------
Or...
Use a custom kernel.
You will have recovery and much more.
XDA
"Xcites: Develop: Achieve"
Click to expand...
Click to collapse
Well, thanks for the help, downgraded to 5.1.1 (or should I downgrade to something more older?)
But I need help to choose a custom kernel (I know how to flash kernels using fastboot ) can you suggest me a kernel that has a custom recovery
Sent from my D6503 using Tapatalk
5.1.1 is fine as you can root it. Just install Recovery( nuts dual recovery/ choose your version carefully & Follow instructions). if you'r going to upgrade to 6.0.1, i would suggest this kernel -http://forum.xda-developers.com/showthread.php?t=2965480.
Just follow the instructions carefully and you'l be fine.
BTW, if you only want recovery, you can easily install in 5.1.1 after geting it rooted using kingroot.
XDA
"Xcites: Develop: Achieve"
nagaGuy said:
5.1.1 is fine as you can root it. Just install Recovery( nuts dual recovery/ choose your version carefully & Follow instructions).
Click to expand...
Click to collapse
Done, thanks!
After converting from kingroot to SuperSU (permanent root) and flashing dual recovery, then flashing a prerooted 6.0.1 ROM, now I have everything I need :good: :victory:
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
bikclaude said:
Hi,
i have a glaxy S2 i9100 that i have convert from a galaxy S2 shw-m250s (korean version)
Everythings worked perfectly but since i have convert it i am unable to flash any ROM on it using Odin. i have tried numerous tutorials and available ROMs but i got nothing
the process always stuck on <ID:0/098> zImage no matter the time i wait it don't move.
I don't know what's the problem since the phone boot and works very well.
Please i need help
galaxy S2 i9100
4.1.2 jelly Bean
Kernel XWLSD
Phone XXLS8
Click to expand...
Click to collapse
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi
I do not know about korean device.
But on i9100 international you have to root your device, then For installing cm13 for instance you have to repartition first and install twrp 3.x.x and cm13 and gapps which you do by flashing zip-files in recovery (Not with odin).
You should search for the developer @CNBLACK who made 5.1.1 and 6.0.1 roms for i9100 and for korean devices aswell (named 250 or similar)‘
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
bikclaude said:
thanks for the reply
i was not able to flash any root kernel like cf-root (remember! odin always fail!) so i used kingoroot to root my phone. i successfully did it but the problem remaind the same i cannot flash twrp 3.x.x. i dont know why.
Any one else with a solution please? thanks a lot
Click to expand...
Click to collapse
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
On i9100 int. you can flash philz cwm6 stockkernel.zip which has root by using stock-recovery because it is a zip-file (no need for odin)
And If you flash isorec twrp it will not show up If are not on an isorec-kernel.
So after installing philz use again recovery to install latest latest cm11 20161119 by @zjq985062714 i9100.zip (has isorec kernel) and isorec twrp 3.0.2-1.zip by @the.gangster.
Again this works without odin just using recoveries.
Then you can do repartitioning and flashing cm13 of others.
This is How i do it always On my i9100 international.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks but i don't have any CWM recovery installed. i should i flash zip files?
bikclaude said:
thanks but i don't have any CWM recovery installed. i should i flash zip files?
Click to expand...
Click to collapse
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA-Developers mobile app
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Marun1982 said:
I need to look up for my OLD SGS2, couse I see this phone cannot die!!!
Click to expand...
Click to collapse
True!
We have already some nice mm-roms and our devs just cooking Nougat for our Phone!
Sent from my STAIRWAY using XDA-Developers mobile app
TriboDoP said:
Hi
Maybe you overlooked it in my Post.
I wrote you can install philz Kernel by using STOCK - RECOVERY. On switched off device press 3 buttons at the same time until stock recovery appears ( Volume up-, power- and home-button).
Then move to "apply update" and choose philz.zip from SD card (of course you have to copy it on
card first).
Reboot System.
Switch off device
Reboot in recovery using 3 buttons and you will have custom recovery to continue.
Sent from my ME173X using XDA- mobile app
Click to expand...
Click to collapse
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
bikclaude said:
Hi,
i have successfully install the philz recovery but the problem who came out is that my phone now hardly boot and always stuck on the samsung logo. i can some times enter the custom recovery. i don't really know what's the problem. is there any solution to that? should i continue installing CM11 (or 12.1 maybe)?
help please. i think i'm loosing my phone
Click to expand...
Click to collapse
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
TriboDoP said:
Hi
This is strange. Philz kernel is well known as a safe kernel which has been used by many people.
Did you look for the correct version for your device ?
I am not sure but it should be PhilZ-cwm6-XWLSD-OXX-4.87-signed.zip (or similar)
Anyway you could try to make a Backup in recovery.
Then i would flash cm11 and twrp which i mentioned before.
In case you flashed wrong kernel flash correct PhilZ kernel or cwm 6.0.4.7
Then flash cm11 and twrp.
Just want to say once more all this works fine On i9100 int. and i do not know if your device is different in any way.
Did you read the threads by @CNBLACK which i recommended?
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
CNBLACK said:
Okay, I checked this thread.
You must upgrade to Stock JB Firmware.
And If you already to use Stock JB, Check my SGS2 thread (u1skt).
Click to expand...
Click to collapse
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
bikclaude said:
Eureka!!!! i have found the problem and solution!!!
as i've previously said, my phone was rooted using kingoroot. once i have installed philz, it start bugging. So i though myself maybe there was a conflict between superuser by kingoroot and superuser by philz. i tried to unistall kingoroot but i was unable tu unistall superuser (don't really know why). nevetheless i have disabled the kingoroot superuser in application manager and the problem just disappeared. now my phone is working perfectly. i have repartitionned it in 6Gb internal and 7Gb USB. i'm ready for the next step.
thanks a lot Sensei
Click to expand...
Click to collapse
Glad your device is working again.
Please keep in mind that (on i9100) you have to increase the SYSTEM partition to 1 GB or more If you want to flash any cm13 or cm14 rom.
As far as i can see you increased only data (internal) partition.
Sent from my ME173X using XDA-Developers mobile app
bikclaude said:
sorry but i'm confused. as i have mentionned in my post, my phone was originaly a SHW-M250S but i have convert it in gt-i9100 by using a pit file and flashing a new firmware. so i should continue by flashing cyanogenmod for SHW-M250S or for gt-i9100?
Click to expand...
Click to collapse
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi again
My opinion is: once the device is converted to i9100 it should behave like one.
Maybe anybody can confirm this.
If it were my device i would make a
- backup in recovery (important!)
Then i would have a go and make
- clean flash of latest cm11 + gapps + twrp 3 ( i think i mentioned the Files before).
If it works - fine! (and can think about flashing other roms).
If it does'nt work: restore the backup from recovery .
But it is your device and your decision.
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
bikclaude said:
Hello! i'm back again:cyclops:
i have successfully install Philz but when i tried to intall the CM11, in had a fail with this message "set_metadata_recursive: some changes failed".
fortunately i have revovered the stock ROM.
so what's the problem? maybe it's the CM11 i have flash? any other help or link please?
thanks a lot
Regards,
Click to expand...
Click to collapse
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
TriboDoP said:
Hi
cm11 should not make any trouble at all.
I do not know why this message turned up.
Please tell me what exact Recovery you used for flashing (e.g. philz cwm 6.0.4.7) and which cm 11 you flashed.
Maybe the Recovery should be updated to latest.
Still I wish somebody would confirm that your korean converted device can be treated as an i9100.
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:46 PM ----------
Hi again
Just did some searching and a reason for this error is as I supposed:
You have to update the Recovery.
Flash in present philz Recovery the "cwm 6.0.4.7".
Then use this Recovery to flash latest cm11 + gapps + twrp 3
Sent from my ME173X using XDA-Developers mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 08:56 PM ----------
@bikclaude
The file name is: philz_touch_6.48.4-i9100.zip
Sent from my GT-I9100 using XDA-Developers mobile app
Click to expand...
Click to collapse
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
bikclaude said:
OK thanks,
please can you paste the philz_touch_6.48.4-i9100.zip link? i cannot find it
Click to expand...
Click to collapse
Put only the exact File name in Google search and you should find it in a second .....
Sent from my ME173X using XDA-Developers mobile app
hello!
thanks TriboDoP but i'm sorry i thing something went wrong for me. i have install philz_touch_6.48.4-i9100.zip as you said but after that my phone just brick. fortunately i have reinstalled it USING ODIN!!! (i had no choice and i desperately tried with odin and it worked). Now i have 2 questions: 1) why did i got a brick after installing philz_touch_6.48.4-i9100.zip??? 2) now that i see that i can flash using odin is there any safety alternative with ODIN to install android 4.4.2 or 5.1? any other suggestions will be appreciate.
really, thanks for your help. i really appreciate