installing sim on truesmart - Ornate TrueSmart

im having a few problems and wondered if the forum could help
1. quite difficult getting my sim in the TS and not sure mine is ok as it doesn't seem to be like a push and click fitting it like a micro sd card it seems to just push back and therefore when i fit the gasket and the cover it is extremely difficult to seat correctly.
2 not sure if this is because of point 1 but im not getting any 3g connectivity any ideas that could solve this would be great.
3 i have a game app that we are working on just for the omate when its finished where would be the best place to show it?
many thanks
Bill

htcupgrader said:
im having a few problems and wondered if the forum could help
1. quite difficult getting my sim in the TS and not sure mine is ok as it doesn't seem to be like a push and click fitting it like a micro sd card it seems to just push back and therefore when i fit the gasket and the cover it is extremely difficult to seat correctly.
2 not sure if this is because of point 1 but im not getting any 3g connectivity any ideas that could solve this would be great.
3 i have a game app that we are working on just for the omate when its finished where would be the best place to show it?
many thanks
Bill
Click to expand...
Click to collapse
Make sure you have the chip facing up towards the screen when you put it in. You need to push it very far in for it to click. Took me a few goes at first but it does work.

DaBountyHunter said:
Make sure you have the chip facing up towards the screen when you put it in. You need to push it very far in for it to click. Took me a few goes at first but it does work.
Click to expand...
Click to collapse
thanks for that chip in securely now but still no 3g not getting any internet services unless using wifi at home

htcupgrader said:
thanks for that chip in securely now but still no 3g not getting any internet services unless using wifi at home
Click to expand...
Click to collapse
You need to manually turn on data connection. I think it's off by default.

Related

hd2 n00b questions

I am purchasing an hd2 that has a non-responsive touch screen (not cracked/broken) from someone off of craigslist. I'm willing to take a chance and hope i'm lucky enough that it's not a complete hardware issue 'cause I obviously won't have any warranty.
My question(s) are:
Can you navigate through the phone and within the apps itself using only the physical buttons?
If I try to replace a digitizer with the ones on ebay for 30-40, do these need soldering? Has anyone had any success trying these? I'm aware that may not completely resolve the issue.
Will t-mobile (my carrier) provide me with an unlock code?
If I flash it with android do all the features of the phone work? WiFi, sound, camera, etc?
khanvict85 said:
Can you navigate through the phone and within the apps itself using only the physical buttons?
Click to expand...
Click to collapse
No.there are no up down left or right buttons.
.......
khanvict85 said:
I am purchasing an hd2 that has a non-responsive touch screen (not cracked/broken) from someone off of craigslist. I'm willing to take a chance and hope i'm lucky enough that it's not a complete hardware issue 'cause I obviously won't have any warranty.
My question(s) are:
Can you navigate through the phone and within the apps itself using only the physical buttons?
Click to expand...
Click to collapse
As Samsamuel said no there is no navigation buttons on the HD2, you have to use the touch screen.
khanvict85 said:
If I try to replace a digitizer with the ones on ebay for 30-40, do these need soldering? Has anyone had any success trying these? I'm aware that may not completely resolve the issue.
Click to expand...
Click to collapse
I have not checked out the digitizers you refered to on Ebay but I would suggest you buy a LCD digitizer assembly already together tbat requires no soldering. This will allow one much easier instalation and replace both major parts that have to work to solve your problem. So you should be assured you will fix the problem.
khanvict85 said:
Will t-mobile (my carrier) provide me with an unlock code?
Click to expand...
Click to collapse
Yes if you are currently a T-Mobile costumer they will must likely give you the unlock code, but you have to contact them.
khanvict85 said:
If I flash it with android do all the features of the phone work? WiFi, sound, camera, etc?
Click to expand...
Click to collapse
Yes on just about all NAND Andriod ROMs for the HD2 have everything functioning with only very minor things being buggy.
T-Macgnolia said:
As Samsamuel said no there is no navigation buttons on the HD2, you have to use the touch screen.
Click to expand...
Click to collapse
i find this kind of odd. most electronics used to be configured where if you couldn't access the primary input there was always a secondary option...kind of like how if your mouse wasnt working, you can still do everything with a keyboard. granted, this isn't in the same category but engineering has definitely fallen off in the way of profits as opposed to proper functionality these days.
i came across this piece of software called 'mymobilizer' which lets you control and see the device and its screen from a computer. i installed but i can't connect because it requires an authentication on the device (press ok to allow or cancel to deny) and i was hoping the home, windows, or call key would act as an enter but unfortunately no. that would have at least given me some kind of flexibility to at least play around with it in it's current state and i was so close yet so far...
are there any other softwares just like this?
I have not checked out the digitizers you refered to on Ebay but I would suggest you buy a LCD digitizer assembly already together tbat requires no soldering. This will allow one much easier instalation and replace both major parts that have to work to solve your problem. So you should be assured you will fix the problem.
Click to expand...
Click to collapse
http://www.dinodirect.com/ProductReviews/ProductID-408569.html
^ here's an example of what i'm referring to.
i dont think (or hope) that it needs a new lens since it looks to be in good shape and the t-mobile US HD2s digitizers don't require soldering from what i've been reading so is it a matter of simply unplugging it from the ribbon or what have you and inserting/plugging the replacement back in?
are there any good guides that focus just on the screen/digitizer disassembly and replacement? I saw that one video on youtube but it's not really a great step by step tutorial.
Yes on just about all NAND Andriod ROMs for the HD2 have everything functioning with only very minor things being buggy.
Click to expand...
Click to collapse
i currently only have a 1gb sd card on me, is it possible to install android from a card with that little capacity? i was reading one where the minimum requirement was 4gb.
If you buy the one on craiglist I wouldn't worry about SD card size as with a dead screen you won't be doing much with it except for use as door wedge perhaps.
dead screens are normally a hardware issue stripping the HD2 is not the simplest plus eBay screen parts are cheap poor quality junk.
If buyining a used HD2 you need to buy a good one & preferably a revision moel with the yellow reset button.
khanvict85 said:
i find this kind of odd. most electronics used to be configured where if you couldn't access the primary input there was always a secondary option...kind of like how if your mouse wasnt working, you can still do everything with a keyboard. granted, this isn't in the same category but engineering has definitely fallen off in the way of profits as opposed to proper functionality these days.
i came across this piece of software called 'mymobilizer' which lets you control and see the device and its screen from a computer. i installed but i can't connect because it requires an authentication on the device (press ok to allow or cancel to deny) and i was hoping the home, windows, or call key would act as an enter but unfortunately no. that would have at least given me some kind of flexibility to at least play around with it in it's current state and i was so close yet so far...
are there any other softwares just like this?
http://www.dinodirect.com/ProductReviews/ProductID-408569.html
^ here's an example of what i'm referring to.
i dont think (or hope) that it needs a new lens since it looks to be in good shape and the t-mobile US HD2s digitizers don't require soldering from what i've been reading so is it a matter of simply unplugging it from the ribbon or what have you and inserting/plugging the replacement back in?
are there any good guides that focus just on the screen/digitizer disassembly and replacement? I saw that one video on youtube but it's not really a great step by step tutorial.
i currently only have a 1gb sd card on me, is it possible to install android from a card with that little capacity? i was reading one where the minimum requirement was 4gb.
Click to expand...
Click to collapse
Yeah I agree have traded functionality for profits to a certain extent. And I agree not having any kind of control with any external buttons is a drag, bit it is a all touch screen device.The link you posted shows a LCD and digitizer wich is what I was talking about and yes this kind is the solderless kind that just plugs into the mainboard. I personally have not done it but I have read about people that have and watch a video or two.
As far as a spacific video to watch I really don't have one to suggest but seach YouTube really good you should find something that will help you out.
Now on the SD card I would get atleast a 2GB to 4GB.
The link is just the digitizer.

What is the support process for getting a device fixed.

I bought an Omate TrueSmart from a backer that didn't want it anymore and looks like the SimCard slot is not working. I tried emailing [email protected] as well as reach out to a contact the original owner had but no response as of yet. Any help would be appreciated.
My model is the DEV 1gb/8gb
thank you,
mike
How is it not working?
Sent from my Galaxy Nexus using Tapatalk 2
kuronosan said:
How is it not working?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Well the simcard is not being recognized but I think it's hardware since it supposed to let you take the sim card out via the "spring" motion but it just grabs it without letting me eject it. Otherwise it's fine but really useless outside of the house since I can only do wifi to use it as Bluetooth is not usable to tether to the phone to use it.
How did you put the SIM inside? Notch towards the unit, with chip face up to the screen?
Sent from my Galaxy Nexus using Tapatalk 2
kuronosan said:
How did you put the SIM inside? Notch towards the unit, with chip face up to the screen?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
followed the directions online. there is a video of the process. there is just no spring action. in that type of sim insert configuration there should be a way for it to come out when pressing. some phones i have seen that on. i guess there is nobody here from Omate to assist. i have emailed and no response.
kuronosan said:
How did you put the SIM inside? Notch towards the unit, with chip face up to the screen?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Here is the video i mentioned.
http://www.youtube.com/watch?v=NvLohkq691c
See how his sim card pops out and has the springy action mine just goes in with no spring hence i think it's a hardware issue.
I actually wrote the user manual. That's why I was asking.
Sent from my Galaxy Nexus using Tapatalk 2
kuronosan said:
I actually wrote the user manual. That's why I was asking.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Oh ok. I didn't have a user manual included when i purchased it. I got the watch in the original cased box with the pillow and the card signed by the CEO as well as the extra battery and screws. I can provide whatever you need as far as proof but I asked the original owner and he advised me he never put a sim in it. I also notice on the lower left corner there is lite leaking from under the sapphire glass.
If I have no hope of achieving any support for the device since I am not the original "kickstarter" backer then I will just sell it since I paid more then the bought it for sure.
thanks again for your quick reply Kuronosan
Mike
In that video, the sim is never shown correctly inserted into the TrueSmart. If it springs back out any, it was not pushed in far enough to latch. When fully inserted and latched, no part of the sim chip is still visible outside the slot. To get it out, push it even further in with a tool or fingernail and it will pop out to the point where is shown in Kurt's video and then can be tweezed or scraped out.
Having the sim inserted partially like in the video might work for some TrueSmarts, but it did not for mine. Once I got past that on my watch, my T-Mobile sim started functioning immediately and continued to do so without any issues.
Sent from my Nexus 7 using Tapatalk
trent999 said:
In that video, the sim is never shown correctly inserted into the TrueSmart. If it springs back out any, it was not pushed in far enough to latch. When fully inserted and latched, no part of the sim chip is still visible outside the slot. To get it out, push it even further in with a tool or fingernail and it will pop out to the point where is shown in Kurt's video and then can be tweezed or scraped out.
Having the sim inserted partially like in the video might work for some TrueSmarts, but it did not for mine. Once I got past that on my watch, my T-Mobile sim started functioning immediately and continued to do so without any issues.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
i did put it all the way in and still did not see the sim. once i can't get it out i habe to open it and remove the back. also the screws are starting to strip. do you get lite leakage on lower left corner?
misha25 said:
i did put it all the way in and still did not see the sim. once i can't get it out i habe to open it and remove the back. also the screws are starting to strip. do you get lite leakage on lower left corner?
Click to expand...
Click to collapse
I am sorry yours does not work right. I had hoped I could help since I had been a little misled myself, initially,by the video you linked to.
I got no similar light leaking, though there was a report with a photo of someone else who did, on the Omate forum that is now down I think. There was some speculation that such a light leakage might indicate that individual watch was not likely even vaguely water-resistant.
My only issue on my 1/8/1900 DevEd Nov watch is that it runs at a maximum of 1gHz instead of 1.3gHz. I have resisted testing the water-resistance and have not opened the back yet. I would like it to run at full rated speed, but have not initiated a warranty claim yet because I feel like the Omate folks do not yet have the resources to respond. I suspect that a lot of the watches in the early Feb USA shipment are running at 1gHz max.
trent999 said:
I am sorry yours does not work right. I had hoped I could help since I had been a little misled myself, initially,by the video you linked to.
I got no similar light leaking, though there was a report with a photo of someone else who did, on the Omate forum that is now down I think. There was some speculation that such a light leakage might indicate that individual watch was not likely even vaguely water-resistant.
My only issue on my 1/8/1900 DevEd Nov watch is that it runs at a maximum of 1gHz instead of 1.3gHz. I have resisted testing the water-resistance and have not opened the back yet. I would like it to run at full rated speed, but have not initiated a warranty claim yet because I feel like the Omate folks do not yet have the resources to respond. I suspect that a lot of the watches in the early Feb USA shipment are running at 1gHz max.
Click to expand...
Click to collapse
trent999 i appreciate the feedback i will try one more time with the sim but maybe wait for some responses
trent999 said:
In that video, the sim is never shown correctly inserted into the TrueSmart. If it springs back out any, it was not pushed in far enough to latch. When fully inserted and latched, no part of the sim chip is still visible outside the slot. To get it out, push it even further in with a tool or fingernail and it will pop out to the point where is shown in Kurt's video and then can be tweezed or scraped out.
Having the sim inserted partially like in the video might work for some TrueSmarts, but it did not for mine. Once I got past that on my watch, my T-Mobile sim started functioning immediately and continued to do so without any issues.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Well i tried again this morning and still nothing. I think it's a hardware issue but my guess is that I am SOL as the only response i got today was an email with a PDF of the users guide. Money down the drain ..
Mike
You will need to take it apart. Kurt has a video of how to do maintenance.
Sent from my GT-P5110 using Tapatalk 2
kuronosan said:
You will need to take it apart. Kurt has a video of how to do maintenance.
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
Well i followed the steps so i can take my sim card out otherwise I would not be able to use my regular phone. The matter is still the issue with the sim card not working and now the lite leakage. Why is there no response from the company that is manufacturing these devices.
If someone tells me listen you were not the original backer so we can't assist you I will forget about contacting them anymore and would just write this off as a loss. It's a shame as it's a really nice device and I spent over $250 for it so it sucks that I am at a loss.
thanks,
Mike
misha25 said:
Well i followed the steps so i can take my sim card out otherwise I would not be able to use my regular phone. The matter is still the issue with the sim card not working and now the lite leakage. Why is there no response from the company that is manufacturing these devices.
If someone tells me listen you were not the original backer so we can't assist you I will forget about contacting them anymore and would just write this off as a loss. It's a shame as it's a really nice device and I spent over $250 for it so it sucks that I am at a loss.
thanks,
Mike
Click to expand...
Click to collapse
They get hundreds of emails a day. With as small as their staff is, it's two maybe three people having to answer those emails, label and ship units as well as other duties.
As a point of comparison , when I worked as a warranty certified tech for Acer, it took 8-12hrs of sitting on hold just to get them to answer a phone call.
Question, does your SIM look like this when installed;
Orientation
Insertion
Installed
misha25 said:
Well i followed the steps so i can take my sim card out otherwise I would not be able to use my regular phone. The matter is still the issue with the sim card not working and now the lite leakage. Why is there no response from the company that is manufacturing these devices.
If someone tells me listen you were not the original backer so we can't assist you I will forget about contacting them anymore and would just write this off as a loss. It's a shame as it's a really nice device and I spent over $250 for it so it sucks that I am at a loss.
thanks,
Mike
Click to expand...
Click to collapse
Woah how much did you spend and who did you buy it from?
Sent from my Galaxy Nexus using Tapatalk 2

Z3v Overheating

My phone has been over heating. A LOT. Even with basic use. No gaming or anything. Anyone experience this? I called tech and they were no help. Told me to run in safe mode and remove my SD card..... Ya that won't work for me.
Thinking about full wipe but I dread resetting up everything.
rsfellman said:
My phone has been over heating. A LOT. Even with basic use. No gaming or anything. Anyone experience this? I called tech and they were no help. Told me to run in safe mode and remove my SD card..... Ya that won't work for me.
Thinking about full wipe but I dread resetting up everything.
Click to expand...
Click to collapse
I haven't had any issues like that. Only over heading I experienced were while using car navigation while wireless charging. You can try shopping cache plus restart to see if something is stuck, or if you have a new installation freeze that and see if things get better.
Another thing to look at is detailed battery use, see if there is any surprises. Many times the app that causes heating will also cause faster battery drain. If you can't find the app then full wipe may be needed.
Edit: one other question, did you change case recently? some cases don't transfer heat as well.
I did. A lot. Got to the point that I could take one picture and the camera would shut off because it was over heating. Hard reset didn't fix anything. I also had wireless problems (wifi would never stay off, airplane mode didn't work), and battery life was pretty poor (coming from Note 2). Replacement phone seems much better on all counts.
Thanks for the info guys. No case on the phone. Still working on rooting and playing with Xposed.... Maybe something there will help.... Or just have Verizon send a new one. I really do love this phone... So hopefully I can resolve this.... Maybe lollipop will help... If we ever get it....
Sent from my D6708 using XDA Free mobile app
I found that using settings reset is just below factory reset cleaned up my issues. It retains your programs and data.
Sent from my D6708 using XDA Premium 4 mobile app
Update
So had Verizon send me a new phone..... Have had it a day and a half and have already seen signs of over heating...... Granted it's close to 100 outside..... But I've been in the car with AC using GPS and it was getting really warm. I've had SEVERAL other phones with the same or more heavy usage with no over heating issues......
Not sure what to do. If it keeps up I'm going to have to consider a new phone....
Anyone know of any risks using the phone when it's over heating??? It's not going to explode or catch fire is it???
jac6695 said:
I did. A lot. Got to the point that I could take one picture and the camera would shut off because it was over heating. Hard reset didn't fix anything. I also had wireless problems (wifi would never stay off, airplane mode didn't work), and battery life was pretty poor (coming from Note 2). Replacement phone seems much better on all counts.
Click to expand...
Click to collapse
rsfellman said:
So had Verizon send me a new phone..... Have had it a day and a half and have already seen signs of over heating...... Granted it's close to 100 outside..... But I've been in the car with AC using GPS and it was getting really warm. I've had SEVERAL other phones with the same or more heavy usage with no over heating issues......
Not sure what to do. If it keeps up I'm going to have to consider a new phone....
Anyone know of any risks using the phone when it's over heating??? It's not going to explode or catch fire is it???
Click to expand...
Click to collapse
Same here. I can use the camera on this one but this is annoying. Might sell and go back to my trusty Note 2 that still hasn't sold anyway.
Anybody find any workarounds (besides the tin-foil inside the case thing)? I get camera shut-down after just playing around with the various modes without even recording anything. Thinking about getting an ice-pack to mount on the phone when I want to record videos......
GREEN Reactor said:
Anybody find any workarounds (besides the tin-foil inside the case thing)? I get camera shut-down after just playing around with the various modes without even recording anything. Thinking about getting an ice-pack to mount on the phone when I want to record videos......
Click to expand...
Click to collapse
same problem here also dude.......... annoyying camera force closing!!!! getting heated up frequently while using camera...
any solution developers??????
Ugh this phone still do this on lollipop rom?
Yes! ?
Sent from my D6708 using XDA Premium HD app
p.shashikiran94 said:
same problem here also dude.......... annoyying camera force closing!!!! getting heated up frequently while using camera...
any solution developers??????
Click to expand...
Click to collapse
Hey bro, you should try resetting the camera app. delete cache first,then data....disable then reenable. then reboot phone. Lemme know if it works
DroidUser_Wind said:
Hey bro, you should try resetting the camera app. delete cache first,then data....disable then reenable. then reboot phone. Lemme know if it works
Click to expand...
Click to collapse
tried bro..... not working!
I was having the overheat issue when I used the camera, so i downloaded the google camera app and it seems to work better.
My wife and I got refurbished phones from VZW, her's crashes to home screen now (Camera) and mine works for a few minutes longer than the old one.
Right now I am looking into getting a new phone, this one is getting annoying, want something I can get current Android version on and not a year old unpatched (Stagefright) leak that is not even Marshmallow.
jac6695 said:
Ugh this phone still do this on lollipop rom?
Click to expand...
Click to collapse
yes dude
jac6695 said:
Ugh this phone still do this on lollipop rom?
Click to expand...
Click to collapse
yes bro
Lol why do you keep quoting me?
Look at his country of origin, he is not accustomed to our ways I would say. :good:
Cut him some slack he is trying to fit in.
Kothagudem is a town in Khammam district of the Indian state of Telangana. It is located in Kothagudem mandal of Kothagudem revenue division. It is located very near to the temple town of Lord Rama, known as Bhadrachalam
sorry friends.. I'm new to xda. sorry.

ifixit teardown...

is online.
https://www.ifixit.com/Teardown/Nexus+6P+Teardown/51660
Thanks, was waiting for them to post 6P teardown. Mostly interested in battery replacement down the road.
Looks harder than 5X for sure.
Repairability score of 2? woah replacing the screen is gonna be a pain if it breaks.
Atleast the battery can be replaced with some paitience, hate to see that the visor must be pried open as well.
syntrix said:
is online.
https://www.ifixit.com/Teardown/Nexus+6P+Teardown/51660
Click to expand...
Click to collapse
Woww 2...
My main concern is replacing the battery so the only real challenge here is getting the visor off without cracking it... apply some heat gun magic to soften the glue? I've never cracked a screen yet *knocks on wood* so hopefully that remains a non-issue.
Well that sucks. When putting it back together, what adhesive would you use to re-attach the bottom piece and the visor?
I can see 2xSIM card slots
Fredro said:
I can see 2xSIM card slots
Click to expand...
Click to collapse
Yeah totally. Looks like the hardware for dual SIM is still there even though the SIM card tray only has one slot... I'm sure someone's going to figure out how to use that eventually. Will probably need a modified SIM tray and some software tweaks.
richie.slayer said:
Repairability score of 2? woah replacing the screen is gonna be a pain if it breaks.
Atleast the battery can be replaced with some paitience, hate to see that the visor must be pried open as well.
Click to expand...
Click to collapse
Nexus Protect...... SquareTrade........
so glad i got nexus protect.... i figured it was going to be a PITA to fix just as the HTC ONEs....
this time its the easy way out... stay calm and get replacement
tech_head said:
Nexus Protect...... SquareTrade........
Click to expand...
Click to collapse
Both of which aren't available in India
bigdave79 said:
Yeah totally. Looks like the hardware for dual SIM is still there even though the SIM card tray only has one slot... I'm sure someone's going to figure out how to use that eventually. Will probably need a modified SIM tray and some software tweaks.
Click to expand...
Click to collapse
Second slot was open on a leaked video from Russia before release IIRC. The ones I've seen (USA) have a plastic bar that runs through the inner "holder" part. Wonder if it's going to be as simple as cutting it or maybe they removed the "tray" that sim card actually sits in. Call to arms for someone to take some detailed tray pictures now
should it be as simple as putting "anyone's" activated SIM in the second tray, and then you've got two numbers on your phone? how does Android handle multiple SIMs? do we know? does it set up multiple profiles? i think someone should find out.
richie.slayer said:
Both of which aren't available in India
Click to expand...
Click to collapse
Yeah, no Nexus Protect or SquareTrade blows.
No protection plan companies in India?

BRF8 new SIM tray check - can't use my 2 SIM and microSD as before

EDIT: added samsung member official forum post:
https://community.samsungmembers.com/en_AE#/post?postId=338519&categoryId=491&page=1
I own a S9+ (SM-G965F) DUO.
Although Samsung chose to pretend that there is not enough space to accommodate 2 nano SIM card and a microSD, easy workaround exists:
https://www.ebay.com/itm/TF-Hybrid-Sim-Slot-Dual-SIM-Card-Adapter-Micro-SD-Extender-Android-Phone-HQ/152886554077?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
It is a very simple thin layer wires to connect the nano SIM externally.
I used this solution perfectly with 1 nano SIM in the tray 1, 1 microSD 128go in the SD tray + the thin layer SIM adapter and my 2nd nano sim in the external tray.
Since BRF8 update, upon boot, there is a message on white background, over all the rest of the launcher and lockscreen, preventing me from doing anything which said basically "There seems to be an unusual object in your SIM tray, please verify". There is no button to tap, no way to bring notification bar, no way to get past it with home, back or recent button.
This is freaking stupid and I don't even understand why BRF8 included this stupid check: I tried all arrangements and the conclusion is that BRF8 detects when there is both 2 SIM and a microSD and then plainly refuse to to anything despite EVERYTHING working perfectly (I can still see both SIM signal and the micro SD perfectly).
So I really need some advice on how to get passed this stupid overlay... A few ideas:
- disable a system app/package with adhell3: sim toolkit ? dual sim config ? but risk is malfunctioning sim cards...
- use another launcher which can bypass samsung home screen / overlay ? or use another theme ?
- get passed the overlay message with a combination of button ?
- remove the overlay message somehow with adb command ?
- find a way to hide the SD mount to prevent triggering the message ?
The issue is that I want to stay on stock with locked bootloader since I don't want to trip knox...
Thanks in advance for any contribution.
Looks like I'm the only one impacted ?
tiliarou said:
Looks like I'm the only one impacted
Click to expand...
Click to collapse
Don't worry
I have the same issue. Pretty pissed I can say.
t-shock said:
Don't worry
I have the same issue. Pretty pissed I can say.
Click to expand...
Click to collapse
Very pissed since this stupid message doesn't bring anything safety improvement, it's juste blocking a perfectly working feature for no reason !!!
Still planning to test disabling some apps with adhell3 to see behavior, as well as going through some logcat.
I'm still trying to work out why on earth anyone needs dual SIMs. Having said that, just because a thing exists doesn't mean its good or that it works well, either that or you could have a faulty one.
i have the same problem..i was using the phone with 2 sims and a 256gb samsung evo sd.
i think it's time to say bye bye to s9 + and look for a phone with larger capacity. 64gb is nothing
tiliarou said:
Very pissed since this stupid message doesn't bring anything safety improvement, it's juste blocking a perfectly working feature for no reason !!!
Still planning to test disabling some apps with adhell3 to see behavior, as well as going through some logcat.
Click to expand...
Click to collapse
If you find what service/app causes that, please let us know
silegeek said:
I'm still trying to work out why on earth anyone needs dual SIMs. Having said that, just because a thing exists doesn't mean its good or that it works well, either that or you could have a faulty one.
Click to expand...
Click to collapse
Having a dual SIM phone is very important for anyone who wants the same phone for business/personal stuff or for anyone who travels a lot (and doesnt want crazy roaming taxes). Also SD is useful if you want all your stuff in your phone and not your laptop etc
AlexanderKgr said:
i have the same problem..i was using the phone with 2 sims and a 256gb samsung evo sd.
i think it's time to say bye bye to s9 + and look for a phone with larger capacity. 64gb is nothing
Click to expand...
Click to collapse
I highly doubt if you find a phone that has: AMOLED screen, IP68, microSD,a headphone jack and awesome performance. But you find so, please let us know
t-shock said:
If you find what service/app causes that, please let us know
I highly doubt if you find a phone that has: AMOLED screen, IP68, microSD,a headphone jack and awesome performance. But you find so, please let us know
Click to expand...
Click to collapse
you are right...but having one phone with 64gb of storage it's not what i need...and after update i have a phone that does not cover my needs. i am thinking of going to op6 256gb
AlexanderKgr said:
you are right...but having one phone with 64gb of storage it's not what i need...and after update i have a phone that does not cover my needs. i am thinking of going to op6 256gb
Click to expand...
Click to collapse
I would probably have to drop my second sim card....
OP6 seems like an OK option but no VoWiFi (which is important in my area) and no IP rating (I'm clumsy so.....)
Also I had bad experience with thier customer support with my OP3, so it's a no-no from me
t-shock said:
I would probably have to drop my second sim card....
OP6 seems like an OK option but no VoWiFi (which is important in my area) and no IP rating (I'm clumsy so.....)
Also I had bad experience with thier customer support with my OP3, so it's a no-no from me
Click to expand...
Click to collapse
also no wireless charging...I don't use cables anymore. Every night before go to bed i place the phone on the charger...!
i also have the same issue i am trying to downgrade so at least my memory card can work along with 2 sim cards
AlexanderKgr said:
also no wireless charging...I don't use cables anymore. Every night before go to bed i place the phone on the charger...!
Click to expand...
Click to collapse
True that
Although I dont have many wireless chargers, is very useful nonetheless
rockykv2 said:
i also have the same issue i am trying to downgrade so at least my memory card can work along with 2 sim cards
Click to expand...
Click to collapse
downgrading works as usual but is not an option
then what should we do i brought the s9 plus 64 gb that i can use memory card & 2 sim card if that doesnt work then the phone is not worth as i am in sales having two number is very imp for me....
silegeek said:
I'm still trying to work out why on earth anyone needs dual SIMs. Having said that, just because a thing exists doesn't mean its good or that it works well, either that or you could have a faulty one.
Click to expand...
Click to collapse
I'm an expatriate and needs my home sim card + my local sim card. Plain and simple.
Please note that this was working perfectly prior to BRF8, they just added a check to prevent the use of 2 sim + a microSD although the phone totally handles it...
I'm also facing the same problem.
Same problem here, any solution?
Well, write to Samsung support. Every single one of you. Threaten to give it back, since it was working fine before and is not anymore. Only one way to get this handled - have Samsung revert the change, I think. Wishful thinking, I know, but what else can you do (especially wothout root)? If disabling packages does not help...
tiliarou said:
I'm an expatriate and needs my home sim card + my local sim card. Plain and simple.
Please note that this was working perfectly prior to BRF8, they just added a check to prevent the use of 2 sim + a microSD although the phone totally handles it...
Click to expand...
Click to collapse
Ah OK. I notice that you put S9+ DUO in your first post is that significant? Its not something I've heard of unless it related to a dual sim model, in which case they shouldnt have blocked anything.
silegeek said:
I'm still trying to work out why on earth anyone needs dual SIMs. Having said that, just because a thing exists doesn't mean its good or that it works well, either that or you could have a faulty one.
Click to expand...
Click to collapse
silegeek said:
Ah OK. I notice that you put S9+ DUO in your first post is that significant? Its not something I've heard of unless it related to a dual sim model, in which case they shouldnt have blocked anything.
Click to expand...
Click to collapse
Of course it's significant: it's the variant that supports 2 SIM cards.
Yes, they shouldn't have blocked anything. And it's without notice or any information in the changelog (which is already a joke as the famous "optimized performance and bug fixes" on google play store).
I opened a topic on samsung members + asked a direct question/bug report to support.
https://community.samsungmembers.com/en_AE#/post?postId=338519&categoryId=491&page=1
Would be good as suggested to inform Samsung directly although I don't really have hopes...

Categories

Resources