[Q] Alcatel 6030 ¿Bricked? =( HELP - Android Q&A, Help & Troubleshooting

Hi. Recently i bought an Alcatel OT 6030a and it came with the rom from my provider in Argentina (Personal) I tried to replace alcatel apps by gapps and the problem appeared when i removed Phone apk. I did not find any way to install it so i decided to flash the stock rom. I tried to do it with One touch upgrade and it retrieved that i have the last version of the rom it so I formated the system and the result didn't change. Then i tried to flash a rom mean TWRP but it retrieved me Zip error and unable to find partition for path /emmc when i tried to do it by sideload.
Then i got a rom for flashing with Flash tool but it retrieves me an error PMT changed for the rom and it must be downloaded.
Now i don't know what else to do. Please help me. Sorry for my english, i hope you can understand me.

Related

[q] [root] n9330

Hi guys i'm new on this forum, i hope that this is the right section.
I've N9330 with firmware e1901 v77 gq2002tc, the same of this guidehttp://forum.xda-developers.com/showthread.php?t=1966593&page=39
I cannot post directly on the guide because i've not 10 message, so i create this topic.
My troubleshooting starts when i decide to root my smartphone. I followed the guide but it not works properly for me. I've extracted scatter file with MTKdroidtool and then i use this scatter with the rom of Brunoand i put this in cellphone with Spflashtool, the programs says OK.
But when i try to start recovery mode comes only a white screen.
So i've tried with binary tool but it not works so i don't have superuser (for the program it's all ok), then i tried special mode of this tool (it is for tablet i've read), and when my android restart it was a semi resetted, i cannot install apps that i have also before the reset only newer apps. I cannot reset my phone with recovery(it no works) and with restore by settings (it not works).
So i tryed to put with flashtool original recovery of the link. IT NOT WORKS. aaa i'm going crazy
I have made before change recovery a backup but i don't know where is it on sd. What can i do????:laugh:
Sorry for my bad english
The backup is in .backup and it is only of user data. Now if someone give me help or his recovery image..
I want only wipe all data or install su. Please help without my Android i'm lost:crying:
Si there a way to wipe without recovery nor settings?
Finally i ve found my stock ROM. I can flash it with spflashtool bit i m scared if brick my phone. I want only chance recovery. I ve re ad that multi port is good for this. Here si the rom http ://
getwapi.com/ search/go.php? type=all&q=e1901 without space
It is possible that nobody have this problemi? This is only topic on e1901_v77_gq2002tc in english
am having the same kind of problem with same kind of device , i fail to get the rom you posted
help plz

[Q] Alcatel Pop c1/ Cant find help on rom backup/Flashify

Hi guys. I cant get any help on how to backup my Alcatel pop C1. Currently using 4.2.2. Ive made a backup on flashify but i can never boot up into a third party recovery. Only stock Recovery. Im scared of messing up and getting stuck at boot logo. Any help? Thanks
4015?
there are 6 versions of this phone
and the latest one 4015x has a different set of partitions
use the diskinfo app from play store
if your DATA partition is "mmcblk0p8 and your system is "mmcblk0p8" then the recoverys and roms that are up at the mo wont work
will probb softbrick your phone
i have modded some recoverys (stock and CWM) and a rom so they work with the diff table
i will be posting them under5 a new post "4015x"
but i would also use the "mobile upgrade" program from alcatel as this can flash the stock rom and get you out of softbrick
this also has a duff recovery with the wrong partition table though
hope this is helpful

SIM not working after erasing all data and flashing stock rom

Sorry to bother you, but I have a little problem and I need your help.
I have Lenovo Phab Plus,
Recently flashed stock rom by QcomDloader
But after that system was taking about 30gb of storage
I was supposed to factory reset but I accidentally erased all by the same flash tool above,
And now SIM not working
I think the solution is to mount modem partition from recovery but the stock recovery doesn't have that option , so I installed TWRP recovery and also rooted according to this link
https://forum.xda-developers.com/android/help/install-twrp-rooting-phab-plus-rooting-t3290347
But everytime I check to mount modem , TWRP returns to default after restarting.
TWRP at first said something about leaving system unmodified for official updates ,but actually I don't know how that could affect mounting.
Could you help me please to fix SIM problem
Thank you and sorry for the long message .
dr_hakam2 said:
Sorry to bother you, but I have a little problem and I need your help.
I have Lenovo Phab Plus,
Recently flashed stock rom by QcomDloader
But after that system was taking about 30gb of storage
I was supposed to factory reset but I accidentally erased all by the same flash tool above,
And now SIM not working
I think the solution is to mount modem partition from recovery but the stock recovery doesn't have that option , so I installed TWRP recovery and also rooted according to this link
https://forum.xda-developers.com/android/help/install-twrp-rooting-phab-plus-rooting-t3290347
But everytime I check to mount modem , TWRP returns to default after restarting.
TWRP at first said something about leaving system unmodified for official updates ,but actually I don't know how that could affect mounting.
Could you help me please to fix SIM problem
Thank you and sorry for the long message .
Click to expand...
Click to collapse
Yeah, I have the same problem. But the Wifi Network also not working!

Please help unbricking UMIDIGI S2 LITE

Hello everyone, i just bought a s2 lite and tried to flash it but when i tried it gave me an error. The error was
"pmt changed for the rom it must be downloaded please select format all download" same with upgrade mode.
I red on some forums that the solution was selecting "format all + download" in sp flash tools and then restoring a nvram backup so you dont have the imei issue
I formatted my device using that method and flashed a stock rom i found in the umi forums, but when i boot my phone it seems like the screen is broken, you see a lot of colors and flashes.
I tried flashing again with other roms but i had the same result.
Please i need some help, i dont know what can i do now.
[email protected] said:
Hello everyone, i just bought a s2 lite and tried to flash it but when i tried it gave me an error. The error was
"pmt changed for the rom it must be downloaded please select format all download" same with upgrade mode.
I red on some forums that the solution was selecting "format all + download" in sp flash tools and then restoring a nvram backup so you dont have the imei issue
I formatted my device using that method and flashed a stock rom i found in the umi forums, but when i boot my phone it seems like the screen is broken, you see a lot of colors and flashes.
I tried flashing again with other roms but i had the same result.
Please i need some help, i dont know what can i do now.
Click to expand...
Click to collapse
I have the same problem. Published ROM probably are not compatible, on the phone from the ROM 6 or 7 month 2018. But I can't find such
The new ROM is out that supports the newest S2 Lite hardware. The old (current) roms only supported old hardware, and with these roms your screen didnt work after reboot. this is the umidigi forum link to the new rom :
http://community.umidigi.com/forum.php?mod=viewthread&tid=17386
and this is the topic where umidigi themselves mention the info about the new hardware:
http://community.umidigi.com/forum.php?mod=viewthread&tid=17080&extra=&page=20
good luck!
edit: It worked for me, phone is now once again fully operational !

Help I completely deleted system on lenovo k33a42

Hi, some days ago I wanted to upgrade my phone's (Lenovo k33a42) operating system using TWRP, but that custom rom wasn't tested on my device, so I completely wiped system but when I was installing .zip file, errors arrived. Now when I want to boot my phone, logo appears and nothing happen. I have only TWRP installed. Can someone help me to install stock or custom rom? Thank you for reading. Im czech. My english is bad..

Categories

Resources