Hello everyone, i just bought a s2 lite and tried to flash it but when i tried it gave me an error. The error was
"pmt changed for the rom it must be downloaded please select format all download" same with upgrade mode.
I red on some forums that the solution was selecting "format all + download" in sp flash tools and then restoring a nvram backup so you dont have the imei issue
I formatted my device using that method and flashed a stock rom i found in the umi forums, but when i boot my phone it seems like the screen is broken, you see a lot of colors and flashes.
I tried flashing again with other roms but i had the same result.
Please i need some help, i dont know what can i do now.
[email protected] said:
Hello everyone, i just bought a s2 lite and tried to flash it but when i tried it gave me an error. The error was
"pmt changed for the rom it must be downloaded please select format all download" same with upgrade mode.
I red on some forums that the solution was selecting "format all + download" in sp flash tools and then restoring a nvram backup so you dont have the imei issue
I formatted my device using that method and flashed a stock rom i found in the umi forums, but when i boot my phone it seems like the screen is broken, you see a lot of colors and flashes.
I tried flashing again with other roms but i had the same result.
Please i need some help, i dont know what can i do now.
Click to expand...
Click to collapse
I have the same problem. Published ROM probably are not compatible, on the phone from the ROM 6 or 7 month 2018. But I can't find such
The new ROM is out that supports the newest S2 Lite hardware. The old (current) roms only supported old hardware, and with these roms your screen didnt work after reboot. this is the umidigi forum link to the new rom :
http://community.umidigi.com/forum.php?mod=viewthread&tid=17386
and this is the topic where umidigi themselves mention the info about the new hardware:
http://community.umidigi.com/forum.php?mod=viewthread&tid=17080&extra=&page=20
good luck!
edit: It worked for me, phone is now once again fully operational !
Related
Hi guys!
I'm having a problem with this phone.
Was trying to flash a ROM from cybermaus.
I've rooted the phone with MTKDroid Tools. It was fine, after that i had problems with running FlashTools to run a ROM.
So i tried many methods to ad new ROM, and suddenly my phone, when started up - shows only chinese lenovo logo...
As far as android's Recovery Mode doesn't support "unsigned" ROMs, I've downloaded a "stock_121122_backup.zip" ROM, but unfortunatelly I get a sign verification error :/
ClockworkMod doesn't support this device, so no chance to run a different ROM. Also wiping data and factory restoration doesn't give any progress...
What can I do now? I have a backup made with Droid before Rooting it, but it didn't do a thing.
Is there any way to run "unsigned" ROM from Android's recovery mode??
Please help - after two days of tough fight i'm ready to cry
When trying to use SP Flash to download backup made by Droid i get this:
SP Flash Error (8038)
what is wrong??
Hi. Recently i bought an Alcatel OT 6030a and it came with the rom from my provider in Argentina (Personal) I tried to replace alcatel apps by gapps and the problem appeared when i removed Phone apk. I did not find any way to install it so i decided to flash the stock rom. I tried to do it with One touch upgrade and it retrieved that i have the last version of the rom it so I formated the system and the result didn't change. Then i tried to flash a rom mean TWRP but it retrieved me Zip error and unable to find partition for path /emmc when i tried to do it by sideload.
Then i got a rom for flashing with Flash tool but it retrieves me an error PMT changed for the rom and it must be downloaded.
Now i don't know what else to do. Please help me. Sorry for my english, i hope you can understand me.
Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Stuck on BootLoop
I am currently facing the same Issue i changed the system/framework (of the CHERRY MOBILE JELLY) with the folder of the SamsungS5 system/framework
cause I was thinking that it'll worked too after changing the system/media of my phone
PLEASE HELP
GUYS
Download and flash the stock ROM with SP flash tools....to will solve all the problems...
the best place to go for any rom for china phones is needrom just google it. I had a jiake v8 phone and this was the only place where i was able to find rom for my phone. good luck ....
I face the same prob!
I have a canvas 2.2 a114 which I bought a few days back . I had been using it very smoothly(not rooted and is new). But suddenly it started to reboot and was stuck at the canvas logo. I have the rom file, but it simply says "Installaton aborted when I load the zip file. help plz! Thanx.
guys the best way to do this is to go to youtube. Find how to port rom to mtk devices or china phones there are plenty of videos. It will be much easier for you to do something when you see how someone is doing it and then you do it for yourself. I have a jiake v8 pphone and this is what i did is not that easy to explain much easier to see.
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Fixed
BrendanWk said:
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Click to expand...
Click to collapse
I was fed up at last and i sent it off to micromax center. They said it was a software prob.
---------- Post added at 09:55 AM ---------- Previous post was at 09:47 AM ----------
Guys I finally figured out (I am new to the android family) that i should install a custom recoery inorder to flash roms. I cant flash roms in stock recovery.
Hello!
I had problems with my lenovo s820 network signal so I tried to flash different roms. My phone is CN version, I downloaded firstly older rom, but network coverage was bad again so I flashed kitkat from needrom.
It was working fine but problems with network still persisted so I tried to flash the backup of the rom that came with the phone. It was working before, but now I am stuck in animation logo and phone stays there, no restart no nothing.
I downloaded the rom through SP Flashtools Download (DA DL Checksums).
Little help will be much appreciated. Thank you!
The original rom that came with the phone was 1.0 1427 ( I think). I made a full backup of it through sp flash tools and after that droid tools (like the guide here in the forum). After that I flashed vibe 2.0 latest from needrom (I flashed it through CWM and it worked great). Since I couldn't root it I tried to flash back my older rom (that came with the phone). I did it with 3.13 with DA DL Checksums. After that when it didnt work I tried same with latest flashtools (5.13).
Someone suggested that I make factory/data reset and wipe cache but problem is I have no recovery on the phone (it enters factory mode). WHen I try to flash recovery with the scatter inside the recovery it says error 8038 (also for another roms). Do you think this is the solution of the problem and is it possible that I use the scatter file from my backup of the initial rom (untick all except recovery) and select the recovery image to install?).
I am afraid that I replace something and make things even wors.
Edit: The backup is working since I already did 2 flashes from it before.
Best Wishes!
I tried flashing the China ROM since the international one was having lots of problems using the simple local updates procedure since one user confirmed it worked perfectly, unfortunately it didn't work for me. It did seem to install but i'm stuck in the "Be Yourself" screen and the pictures screen as well. I can go in recovery mode but i didn't have TWRP installed. I think it wasn't a good idea since it went from Android Nougat (7.1.1) to Android Marshmallow (6.0.1)
I tried wiping all data in recovery mode but it keeps saying "wiping failed" even after i try to reboot it.
How do i fix this???
Nubia Z11
GouryellaIV said:
I tried flashing the China ROM since the international one was having lots of problems using the simple local updates procedure since one user confirmed it worked perfectly, unfortunately it didn't work for me. It did seem to install but i'm stuck in the "Be Yourself" screen and the pictures screen as well. I can go in recovery mode but i didn't have TWRP installed. I think it wasn't a good idea since it went from Android Nougat (7.1.1) to Android Marshmallow (6.0.1)
I tried wiping all data in recovery mode but it keeps saying "wiping failed" even after i try to reboot it.
How do i fix this???
Click to expand...
Click to collapse
Try flashing the 7.1.1 rom to go back.....
also mention the device you are having problem...
HemanthJabalpuri said:
Try flashing the 7.1.1 rom to go back.....
also mention the device you are having problem...
Click to expand...
Click to collapse
Is it possible to still flash the china marshmallow ROM after i go back to 7.1?
As the China roms of devices are banned Don the forum you will better off on the oem website.
Tried to change ROM on my Z11 to the Chinese version too .... and stuck in bootloop too
The only way to have a functionnal phone went to go back to the global rom (that hopefully I had on my computer), via Nubia recovery and OTG stick.
The error I got was that the phone was unable to mount /data and /sdcard, for unknown reason.
darktator_fr said:
Tried to change ROM on my Z11 to the Chinese version too .... and stuck in bootloop too
The only way to have a functionnal phone went to go back to the global rom (that hopefully I had on my computer), via Nubia recovery and OTG stick.
The error I got was that the phone was unable to mount /data and /sdcard, for unknown reason.
Click to expand...
Click to collapse
Since the stock roms are encrypted by default u'll have to try formatting first then u might flash the rom.
If u can unlock biotloader and flash twrp then it'll be even better for further modding.