:good: what you guys think of Tempered Glass Screen Protector ? any one use this kind of Tempered Glass Screen Protector ? I think it will instead the normal Screen protector in the near future. because it's good tocuh . Anti-Glare, Anti-Scratch, Anti-Fingerprint
L.LA said:
:good: what you guys think of Tempered Glass Screen Protector ? any one use this kind of Tempered Glass Screen Protector ? I think it will instead the normal Screen protector in the near future. because it's good tocuh . Anti-Glare, Anti-Scratch, Anti-Fingerprint
Click to expand...
Click to collapse
I am using one, a cheaper than the Spigen one. But it works great! Suprisingly good actually. Since I hate screen protectors cause I always get one dust particle underneath it.. It makes me take it off again. But with the tempered glass It fell exactly on place and without any dust underneath it..
Armazia said:
I am using one, a cheaper than the Spigen one. But it works great! Suprisingly good actually. Since I hate screen protectors cause I always get one dust particle underneath it.. It makes me take it off again. But with the tempered glass It fell exactly on place and without any dust underneath it..
Click to expand...
Click to collapse
Yes. I think so. the feeling just like not use any screen protector
Think there may already be a thread on this, and yes, they are awesome.
http://forum.xda-developers.com/showthread.php?t=2441894
Note 3 Tempered Glass Screen Guard
Sent from my SM-N9005 using Tapatalk
I'm using this one-
http://www.amazon.com/gp/product/B00GPAFP7W/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
I'm using a MIME USA Feather Glass protector and have had it on my device since late October and it's still flawless. I would have a hard time using a regular protector in the future after having a tempered glass one.
L.LA said:
:good: what you guys think of Tempered Glass Screen Protector ? any one use this kind of Tempered Glass Screen Protector ? I think it will instead the normal Screen protector in the near future. because it's good tocuh . Anti-Glare, Anti-Scratch, Anti-Fingerprint
Click to expand...
Click to collapse
I have the Spigen glass and i love it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
أرسلت من sm-n9005 الخاص بي باستخدام تاباتوك
Dude, look in Note 3 Accessories section, there is a multiple page post on this already. Try searching some it will save people from having to post again lol
Eric214 said:
Dude, look in Note 3 Accessories section, there is a multiple page post on this already. Try searching some it will save people from having to post again lol
Click to expand...
Click to collapse
the spigen is way overpriced. there are others as good like the Nillkin brand. It has rounded edges too.
xdm9mm said:
The Spigen is way overpriced, there are others just as good, like the Nillkin brand, it has rounded edges too.
Click to expand...
Click to collapse
I'll put one in for the Tech Armor, it also has rounded edges.
http://www.amazon.com/gp/product/B00GPAFP7W/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
im using glass-M tempered lass,it is okay i guess,works fine but kinda fingerprint magnet,lol
You can pick one up in the Verizon stores, I'm not sure of the hardness rating, I like the feel, it's rounded, does the job and looks good. It's about 25 bucks, can get them cheaper online but if you need one ASAP, pick one up in the verizon store, they'll install it as well so if they mess up have them do it again free of charge.
But out of all the reviews, the best one seems to be by iloome.
I use this one:
http://www.ebay.com/itm/Spigen-SGP-...l_Phone_Screen_Protectors&hash=item3a8fcfe74c
Great screen quality.
Svid said:
I use this one:
http://www.ebay.com/itm/Spigen-SGP-...l_Phone_Screen_Protectors&hash=item3a8fcfe74c
Great screen quality.
Click to expand...
Click to collapse
That one looks nice, I really like the MIME Feather Glass since it is only .15mm thick.
I'm using the Spiegen - the top of the line one.
It works great so far and fits the Spiegn Sim armour vieww case with no problem.
While I like a good deal too, I don't understand that we buy a VERY expensive Note 3 and then try and cut corners with the Glass and case.
I wish I could use one. On day one, I started with the Verizon tempered glass screen protector and I loved the feel of it, but over a few days time, the top right corner developed an odd sort of hazy "bubble" that wouldn't stay flattened out. I confirmed the screen protector wasn't touching the frame, so I figured it was just the "crappy" store brand screen protector. I decided to go ahead and get a MIME Ghost Glass to replace it, and over the next few days, the same story. Top right corner, bubble.
Upon closer inspection, my Note 3 has an (almost) imperceptible "bend" in the very top right corner of the screen. The only way I could tell was the way the light warps a tiny bit in the reflection of the glass in just that corner. The rigid nature of tempered glass coupled with this slight bend in the phone's glass causes the corner of the protector to lift ever so slightly off the screen, creating the ugly bubble.
The phone was bought new, has never been dropped, and is in perfect condition, it's simply a manufacturing "defect". So, it's back to the regular old screen protectors for me.
L.LA said:
:good: what you guys think of Tempered Glass Screen Protector ? any one use this kind of Tempered Glass Screen Protector ? I think it will instead the normal Screen protector in the near future. because it's good tocuh . Anti-Glare, Anti-Scratch, Anti-Fingerprint
Click to expand...
Click to collapse
Yes, I used Tempered Glass Screen Protector. It is very nice to use and protect your screen from any scratch or fall in a floor.
WishRyder said:
I wish I could use one. On day one, I started with the Verizon tempered glass screen protector and I loved the feel of it, but over a few days time, the top right corner developed an odd sort of hazy "bubble" that wouldn't stay flattened out. I confirmed the screen protector wasn't touching the frame, so I figured it was just the "crappy" store brand screen protector. I decided to go ahead and get a MIME Ghost Glass to replace it, and over the next few days, the same story. Top right corner, bubble.
Upon closer inspection, my Note 3 has an (almost) imperceptible "bend" in the very top right corner of the screen. The only way I could tell was the way the light warps a tiny bit in the reflection of the glass in just that corner. The rigid nature of tempered glass coupled with this slight bend in the phone's glass causes the corner of the protector to lift ever so slightly off the screen, creating the ugly bubble.
The phone was bought new, has never been dropped, and is in perfect condition, it's simply a manufacturing "defect". So, it's back to the regular old screen protectors for me.
Click to expand...
Click to collapse
I have MIME "Feather" on mine and don't have any problems.
Hi y`all.
Prefer brando rounded edge.
Removed it though. thought it botched up my proximity sensor.
Turns out it dosn´t work properly even with screen protector removed.
got a new sensor. Haven´t installed it yet. fairly simple though.
You guys have trouble with the proximity sensor?
Regards
ELO
Related
So I'm a true believer in tempered glass screen protector because it saved me in thousands. I bought some cheap one even before the phone came out to use until the proper one comes out. This one is just square to cover the viewable screen. I bought two of them and both of them doesn't adhere at the bottom corners on two different phones. I went online to do some digging and found that most if not not all have the same issue and all sellers showing full screen cover does a bait and switch and send out the very exact same square ones.
I'm now beginning to wonder... Is this because all sellers have same batch of cheap stuff that doesn't fit or is it because G5 screen isn't perfectly flat? (never mind the curve on top) it seems the glass used on G5 is more flexible because when you press hard on it you can see the LCD distortion in some spots. In normal use it should not matter and I guess it was necessary to make the top curvature but it can also mean that when the the glass and LCD assembly can become "curvy".
Has anyone applied tempered glass protector yet? How did your application experience go? And if you had a successful one, please share the info of the product you used. NO LINKS.
Please, this is not an ad space. Only the real users with real input is welcome.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H820 using XDA-Developers mobile app
The glass screen is indeed squishy. This is expected. The G4 was curved. I expect squishy glass is less likely to shatter.
pigowar said:
So I'm a true believer in tempered glass screen protector because it saved me in thousands. I bought some cheap one even before the phone came out to use until the proper one comes out. This one is just square to cover the viewable screen. I bought two of them and both of them doesn't adhere at the bottom corners on two different phones. I went online to do some digging and found that most if not not all have the same issue and all sellers showing full screen cover does a bait and switch and send out the very exact same square ones.
I'm now beginning to wonder... Is this because all sellers have same batch of cheap stuff that doesn't fit or is it because G5 screen isn't perfectly flat? (never mind the curve on top) it seems the glass used on G5 is more flexible because when you press hard on it you can see the LCD distortion in some spots. In normal use it should not matter and I guess it was necessary to make the top curvature but it can also mean that when the the glass and LCD assembly can become "curvy".
Has anyone applied tempered glass protector yet? How did your application experience go? And if you had a successful one, please share the info of the product you used. NO LINKS.
Please, this is not an ad space. Only the real users with real input is welcome.
Click to expand...
Click to collapse
Have the same Problem with my g5
I had no problem with the bottom corners, bot the top was just on your photo.
RealLordK1 said:
I had no problem with the bottom corners, bot the top was just on your photo.
Click to expand...
Click to collapse
That's the concern I have. I really hope that the cheap, mocked up protector is the issue and not the screen. Top is fine since we know there's curve. We need more owners to provide their experience but may be there aren't that many who purchased the early version of the protectors knowing they would not fit well?
Sent from my LG-H820 using XDA-Developers mobile app
I got my glass screen protector at at&t and installed there, i thought that i was rid of the issue that the protector would not come up at the edges but a week and a half it came up and now i removed the protector and clean it and cleaned the screen and used some clean water to put it on and then i had no issue about the protector coming off at the edges
There's another thread: Here where the same issue is experienced.
I wonder if this is with all G5s or is this just the Titan color that has this issue as some user mention they have Silver devices without the issue.
Tried 3 different suppliers for tempered glass protector and they all did this. I think it's the screen not the protectors.
I installed a cheap square screen protector and am waiting for a "real" one to show up. Currently on order, but taking longer than they originally said. With the one I have on now, I found that you have to install is slightly above the bottom of the screen to be sure it doesn't interfere with the lower, removable pieces of the phone. When I put it on just slightly higher than I wanted to it fit OK. It took me a bunch of tries and the lower right corner has a small bubble in it, but I attributed that to my several installation attempts. The three other corners are fine.
Just got a Yootech Premium glass protector on Amazon last week. It's curved for the tip, so it's a film glasses protector. No issues whatsoever. Fit/alignment is perfect. They even painted the to pay black, so there's no light bleed or distortion there. I'm really happy with it.
I mean, it's a very simple thing to do accidentally. I feel like it's always a 50/50 shot when I try to put down a screen protector bubble-free.
I haven't tried a protector on the G5, but I did have one on the very curved G4 with no issues.
porsche911996 said:
Just got a Yootech Premium glass protector on Amazon last week. It's curved for the tip, so it's a film glasses protector. No issues whatsoever. Fit/alignment is perfect. They even painted the to pay black, so there's no light bleed or distortion there. I'm really happy with it.
Click to expand...
Click to collapse
Same product same results here. I waited for yootech to replace the cheap glass protector I bought at launch. I had great results on the G4 with this brand.
+1 on the Yootech. I got one and it is great. At first it looked like there was a light film in one spot between the protector and screen, but it went away in a couple hours.
http://imageshack.com/a/img924/3333/mnQNMj.jpg
Same problem ..I used Ringke screen protector
Hello everyone,
It's my first purchase of an LG device as I've always been HTC. The G5 is an amazing phone, hats off to LG for doing a great job. However, it's the worst phone when it comes to fitting a screen protector. I've purchased 5 so far. First 3 turned out to be a more bespoke cut glass at the top section to fit around the camera and underneath the speaker (all happened to be same brand from 3 different sellers, but they all had the same issue. Top section wouldn't adhere and bottom right corner too.
Bought two square protectors that just fit the visible screen and that's slightly better but small areas won't adhere, again top bottom right being the main culprit. Luckily I've been able to get refunded for the poorly fitting protectors but I'm getting fed up of having to change them every few days. I've never had such issue with fitting a protector as I normally get it spot on first time.
Anyone know where I can get a proper one, cut correctly and adhere to the LG's fussy screen?
But do any of them fit with the Spigen Style Armor slide on case?? That is the burning question.
I have a gold G5 and tried 3 tempered glasses in the mall but none fitted my phone. The corners below and above has bubbles lifting the tempered glass. It is now my problem where to find a good protector.
Vida_RPh said:
I have a gold G5 and tried 3 tempered glasses in the mall but none fitted my phone. The corners below and above has bubbles lifting the tempered glass. It is now my problem where to find a good protector.
Click to expand...
Click to collapse
I've bought this one :
https://www.amazon.com/Protector-An...losion-proof-Pressure-resistant/dp/B00WSC6IC2
It fits the screen perfectly and there is no grid in it, like others.....
Gesendet von meinem LG-H850 mit Tapatalk
---------- Post added at 07:07 AM ---------- Previous post was at 06:54 AM ----------
Sorry, i've took the wrong link.... This is the right one:
https://www.amazon.de/Schutzfolie-V...qid=1473397546&sr=8-1&keywords=sundatom+lg+g5
Gesendet von meinem LG-H850 mit Tapatalk
Hi, thanks for the help! But i cannot sign up on this amazon page because it's in german not all are being translated into english
Screen is curved
Just wanted to update you there is not a screen protector that is glass which fits the LG G5 because the screen is curved slightly in the bottom corners. This is an issue which the accessory manufacturers are aware but apparently have no intentions of resolving . So just to be perfectly clear you will not ever find a screen protector that does not bubble on the bottom right and left hand corner unless it is a plastic screen protector.
I wanted to create a thread to collect everyone's findings and opinions on what the best screen protector for the S8 is.
From what I have found there are:
- TPU dry application
- TPU wet application
- tempered glass glue only at sides
Post what you think the best protector is for feel, sensitivity and coverage. Also how compatable with cases and ease of application.
So far I've tried the amFilm from techmatte. Glue is viable around the sides and the touch sensitivity is reduced after insalll.
Master List - Tempered Glass
amFilm By Techmatte
Tempered glass, glue round the outside and top of the protector only. dot matrix on the screen for better sensitivity.
Glass feels nice but leaves loads of fingerprints and it is really reflective to light. Reduced sensitivity especially at the top. Works well with cases as its not quite full coverage.
Master List - TPU Films
yootech
Wet apply. Went on easy, works well with case no lifting. Feels nice.
Techgear ghostshield
Dry install. Kinda hard install as top part has separate protective film to the rest so it's hard to remove tbe main bit without getting dust under the protector. Sticks to the sides well. Clarity is bad, makes the phone look greasy /oily. Touch sensitivity is unaffected.
I bought these and it went on really easy, no bubbles and doesn't lift around the edge like a previous protector I used did when I put my Spigen Thin case on, feels ok to use too
https://www.amazon.co.uk/dp/B071R5P7QN/ref=pe_385721_37986871_TE_item
EDIT - This is the previous protector I used, I found it reasonable to apply but lifted around the edges when putting my case on
https://www.amazon.co.uk/gp/product/B01MZ9L4WG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
MilgeS said:
I bought these and it went on really easy, no bubbles and doesn't lift around the edge like a previous protector I used did when I put my Spigen Thin case on, feels ok to use too
https://www.amazon.co.uk/dp/B071R5P7QN/ref=pe_385721_37986871_TE_item
Click to expand...
Click to collapse
Got one of these on order due Wednesday. Looking forward to this as it's wet install. I'm currently usi g Ringke Slim case
Sent from my Galaxy S8 using XDA Labs
Hi, yes it does, just stops 1-2mm short of the edge of the glass all around. I hope you like it
The Whitestone Dome Glass seems to be getting alot of attention. See the following video review:
Part 1:
https://www.youtube.com/watch?v=N8nBUAb9x44
Part 2:
https://www.youtube.com/watch?v=-fbZ9HtcYOA
Official Site:
http://whitestonez.com/
SlyUK said:
The Whitestone Dome Glass seems to be getting alot of attention. See the following video review:
Part 1:
https://www.youtube.com/watch?v=N8nBUAb9x44
Part 2:
https://www.youtube.com/watch?v=-fbZ9HtcYOA
Official Site:
http://whitestonez.com/
Click to expand...
Click to collapse
I have this one on my phone and my girlfriends ( both of us have the S8, not the plus).
I have a case on mine and it fits very well and doesn't interfere whatsoever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G950U using Tapatalk
Got me a protector from Five and Below. Works great and doesn't lift off screen inside of case.
This is another Korean company that maybe worth looking at:
http://www.amazingat.com/
Hawke84 said:
Master List - TPU Films
yootech
Wet apply. Went on easy, works well with case no lifting. Feels nice.
Click to expand...
Click to collapse
How does it feel? Some reviews said it's too rubbery. I'm finding it so hard to find a protector I know I'll like
daddymikey1975 said:
I have this one on my phone and my girlfriends ( both of us have the S8, not the plus).
I have a case on mine and it fits very well and doesn't interfere whatsoever. View attachment 4136076View attachment 4136077View attachment 4136078
Sent from my SM-G950U using Tapatalk
Click to expand...
Click to collapse
Same here, no touch issues, looks awesome and works with a lot of cases. I'm using it with uag plasma and monarch.
Amylittlehands said:
How does it feel? Some reviews said it's too rubbery. I'm finding it so hard to find a protector I know I'll like
Click to expand...
Click to collapse
Forget yootech, it works well the first 1-2 days but then you have to repress on the borders every day because the TPU cover lift it, and now after 10 days some parts are not gluing anymore specially the bottom corners.
Feeling is plasticky and a bit sticky, not as good as ''dry'' films
vegetaleb said:
Forget yootech, it works well the first 1-2 days but then you have to repress on the borders every day because the TPU cover lift it, and now after 10 days some parts are not gluing anymore specially the bottom corners.
Feeling is plasticky and a bit sticky, not as good as ''dry'' films
Click to expand...
Click to collapse
Ah darn. I still have the chappy film that came with the phone on. I've had so many protectors on phones and none of them are good enough
Amylittlehands said:
How does it feel? Some reviews said it's too rubbery. I'm finding it so hard to find a protector I know I'll like
Click to expand...
Click to collapse
Actually really like the feel. Doesn't feel too rubbery. It's not glass but it's quite smooth as long as you don't dig your nails in. I forget it's there a lot. Took me a while to apply and get it right but not had any edge lifting. I am using a case so that may help.
Sent from my Galaxy S8 using XDA Labs
I can whole heartedly recommend these ones:
https://www.amazon.co.uk/gp/product/B06XY7K875/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
They are the film variety, but PET film, so no rubbery feel. These also benefit from being slightly curved at the edges (much like the TGSP's) so fit perfectly, with no lift. Have been using mine for 3 weeks now and its still firmly stuck on all edges, NO LIFTING!! And best of all, they work with cases too. Currently using it with a slim case, but it fits my Spiegen Neo Hybrid with no problems. And did I mention you get 3 in a pack. *drops the mic....walks off stage*
All jokes aside, these are a really good solution for screen protection with very few drawbacks.
P.S I do not work for this company nor is this recommendation being endorsed. Just passing on some invaluable knowledge to hopefully prevent someone else from buying almost every single variety of screen protector available.....not that I did that.....much.
honestly this screen protector thing is so long winded, and only for this phone as for all the others its been easy
there should be a section for uk screen protectors as we cant buy certain ones like the whitestonez version
finally got hold of this phone and cant decide what protector to get, has to be a good one as the screen is what it all is about
bm_99 said:
honestly this screen protector thing is so long winded, and only for this phone as for all the others its been easy
there should be a section for uk screen protectors as we cant buy certain ones like the whitestonez version
finally got hold of this phone and cant decide what protector to get, has to be a good one as the screen is what it all is about
Click to expand...
Click to collapse
You can get the Whitestone in the UK from Mobilefun.co.uk but it's £68 a ridiculous price!
Batfink33 said:
You can get the Whitestone in the UK from Mobilefun.co.uk but it's £68 a ridiculous price!
Click to expand...
Click to collapse
damn, lol max i would spend it probably £20.
there should be a vote on the best ones available and where from for country specific versions i think as its all to confusing if someone from usa posts a protector with really good reviews but we cant even get them
This is the screen you are all looking for. Im using it. Its awesome. Trust me i feel your pain.
[Tray Installation]Samsung Galaxy S8 Screen Protector, OTAO [Case-friendly] Tempered Glass Screen Protector with Positioner For Galaxy S8 (S8) https://www.amazon.com/dp/B071PB2KP2/ref=cm_sw_r_cp_apap_v5NWvthJmWDmp
The title pretty much covers it. I see many questions on this, but no definitive answers. I tried the official one but returned it since it would cover the edges of the screen. Bought one off of Amazon that said it didn't do that, but it did as well.
So simply, I'm looking for one that won't cover the screen is good quality. Simple enough, no?
I bought this case by Nillkin for my phone and it came with a free screen protector film (not a glass protector) and I find it pretty decent. I didn't find any issues with fingerprints on it.
You can find it here: https://www.amazon.com/OnePlus-Nill...=1504853058&sr=8-3&keywords=oneplus+5+nillkin
The Nillkin TGSP is probably the most compatible at the moment but it does have the larger gap around the edges, I've still got mine applied, hoping for more luck with the Rhinoshield case and a full face protector as the case is supposed to be much more compatible with them, my advice would be to go for the Nillkin until we all find the perfect replacement.
http://www.dx.com/p/naxtop-tempered...for-oneplus-5-transparent-470989#.WbOz7iNnp74
Anyone tried this one?
Transparent or with black borders?
dasti555 said:
http://www.dx.com/p/naxtop-tempered...for-oneplus-5-transparent-470989#.WbOz7iNnp74
Anyone tried this one?
Transparent or with black borders?
Click to expand...
Click to collapse
Thanks. Looks interesting particularly the all transparent version, curved edges and its cheap enough to experiment. There is no indication on where the adhesion is and no specific mention of a Oleophoic coating but describes an anti-fingerprint coating. I currently have the under screen dust issue with my Orzly tgsp but I love the feel of that screen so am looking for a alternative protector with similar finger feel.
I'm suspecting that my bumper case is causing the Orzly's issue as the dust only comes from the volume rocker area and likely due to the case pushing the Orzly's edge when pressed. Maybe this alternate protector with the curved edges would not have the same issue, while the all transparent version would likely have no issues cutting off the screen view unless the curved edge causes some undesirable optical effect.
If you get one please post your observations.
3DSammy said:
Thanks. Looks interesting particularly the all transparent version, curved edges and its cheap enough to experiment. There is no indication on where the adhesion is and no specific mention of a Oleophoic coating but describes an anti-fingerprint coating. I currently have the under screen dust issue with my Orzly tgsp but I love the feel of that screen so am looking for a alternative protector with similar finger feel.
I'm suspecting that my bumper case is causing the Orzly's issue as the dust only comes from the volume rocker area and likely due to the case pushing the Orzly's edge when pressed. Maybe this alternate protector with the curved edges would not have the same issue, while the all transparent version would likely have no issues cutting off the screen view unless the curved edge causes some undesirable optical effect.
If you get one please post your observations.
Click to expand...
Click to collapse
Well I post it here because I was looking if somebody already bought it. I have orzly with I'm happy however it have rainbow effect in the middle and sometimes it's quiete visible. My friend told me that he bought that one from link I sent (with black borders) and he is told me he don't have rainbow effect or cutted screen.. so i don't know
Like you I'm more interested in the transparent one as I don't know why there is even a black version on any of them.
On my Orzly I've seen the rainbow effect but only when the screen is at an unusual angle while wiping the surface clean but never when using the phone normally. It's only the dust that is driving me crazy. I'm even considering going with just my bumper case and no protector but I'll wait a while before going that route.
This one looks interesting (not glass though), quite clever application method, reminds me of the default screen protector that comes with the phone that a lot of people seem to like
Ringke Invisible Defender Screen Protector
https://www.amazon.com/Protector-Invisible-Guaranteed-Compatible-Clearness/dp/B074137YDH/
Just read the Amazon reviews and they're not that positive.
I still have to receive my oneplus 5. Would you guys recommend keeping the pre-applied film with the orzly bumper over any screenprotector that's on the market now?
ned4spd8874 said:
The title pretty much covers it. I see many questions on this, but no definitive answers. I tried the official one but returned it since it would cover the edges of the screen. Bought one off of Amazon that said it didn't do that, but it did as well.
So simply, I'm looking for one that won't cover the screen is good quality. Simple enough, no?
Click to expand...
Click to collapse
i am in the same boat as you.
found this -
imak Oneplus 5 Transparent Clear Full Cover Edges 0.15mm TPU LCD Screen Protector for Oneplus 5 back Anti-shock Protective Film
http://s.aliexpress.com/BBBjERbi
(from AliExpress Android)
i just want clear protective glass that covers the whole screen. anything similar to whitestone dome protective glass (for s8) would be great.
I bought the one from Nillkin until a better one came along. However it was pure garbage. It didn't fit the whole screen and the top notch was way off center. But the main reason I threw it in the trash was there was the entire right side would not stick to my phone. There was a good 1/8" section all along the right edge that was not sticking and just looked like crap.
Finally the almost perfect tgsp.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Almost perfect is because its not fully adhesive. Only perimeter adhesive.
so dust will appear along the sides and rainbow will appear sooner or later.
spawn549 said:
Finally the almost perfect tgsp.....
Almost perfect is because its not fully adhesive. Only perimeter adhesive.
so dust will appear along the sides and rainbow will appear sooner or later.
Click to expand...
Click to collapse
Which one is it
i dont recommend it. after few hours of usage tiny dust appearing from speaker and sensor holes going right inside the tgsp. the coating is bad. attracts fingerprint n dust. screen will smudge all over.
srt99 said:
i am in the same boat as you.
found this -
imak Oneplus 5 Transparent Clear Full Cover Edges 0.15mm TPU LCD Screen Protector for Oneplus 5 back Anti-shock Protective Film
http://s.aliexpress.com/BBBjERbi
(from AliExpress Android)
i just want clear protective glass that covers the whole screen. anything similar to whitestone dome protective glass (for s8) would be great.
Click to expand...
Click to collapse
I just picked up two packs for fun - will report back.
spawn549 said:
i dont recommend it. after few hours of usage tiny dust appearing from speaker and sensor holes going right inside the tgsp. the coating is bad. attracts fingerprint n dust. screen will smudge all over.
Click to expand...
Click to collapse
Got it, but wich brand produce this one? Just to look around
No brand packaging on it...i would stay away from non full adhesive due to it attracts dust and rainbow effect. I would rather use a full adhesive tgsp eventhough it will block few mm from the sides
This is the best I found for now. Not full covered but minimal bars on the side and almost no rainbow effect. After 2 weeks no dust at all.
https://fr.aliexpress.com/item/Scre...lus-3-3T-Three-1-3-1-3T-Full/32795224827.html
bibi98 said:
This is the best I found for now. Not full covered but minimal bars on the side and almost no rainbow effect. After 2 weeks no dust at all.
https://fr.aliexpress.com/item/Scre...lus-3-3T-Three-1-3-1-3T-Full/32795224827.html
Click to expand...
Click to collapse
Do you also use a case with this protector? If you do please indicate which one as even an all adhesive tgsp can be lifted by many of the cases being sold.
Disgustip8ed said:
I just picked up two packs for fun - will report back.
Click to expand...
Click to collapse
Anything new about those glass screen protectors?
I think it would be easier for us Moto X4 users to have a unified thread on available cases and screen protectors.
I recently bought the Moto X4 and my case and screen protector were just delivered.
I will post pics once I installed the plastic screen protector.
I'm still waiting for my iMAK Hydrogel Film for the front/back.
Will update you soon.
If you have anything, please post your pics as well.
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got the same case, except in red. It fits very well, and is quite nice! It fits very well. I was afraid it'd be too rubbery but it holds its shape well, while still being flexible enough if I need to remove it.
As usual, it blocks some headphone jacks if they have a wide base, but that's expected.
Mine was $8 on Amazon. https://www.amazon.com/gp/product/B0753CD8R7/
Yes it does fit well but too bulky for my liking. I bought mine for USD5 ?.
Anyway, I'll probably get another type of case. Here's the link on how it looks like
http://www.lazada.com.my/imak-shock...html?spm=a2o4k.search.0.0.226b6e31cAW5cj&ff=1
I'm still undecided which of the 3 to get. I want the transparent but will definitely turn yellow after sometime.
ijuanp03 said:
Yes it does fit well but too bulky for my liking. I bought mine for USD5 .
Anyway, I'll probably get another type of case. Here's the link on how it looks like
http://www.lazada.com.my/imak-shock...html?spm=a2o4k.search.0.0.226b6e31cAW5cj&ff=1
I'm still undecided which of the 3 to get. I want the transparent but will definitely turn yellow after sometime.
Click to expand...
Click to collapse
I went for the smooth case, skin type feel. Hope its not slippery and gives good grip!
i ordered these 3 things on ALIEXPRESS for supercheap prices,
waiting for them to arrive... (they usually are quite fast in deliveries with china registered airmail)
2 back covers, and 5 camera protectors (for the back camera they were so cheap i ordered 5 immediately)
https://imgur.com/a/E3R0O (click link to watch all 3 pictures)
i hope one of these backcovers will at least feel like it offers good protection for dropping on the corners.
good camera protection on the back (=creating much distance between the backcover and the camera so there is a few mm's in between,
so the camera no longer touches a surface when we lay the phone on the back)
i already have a just in case glass screenprotector, which offers smooth touch...
but it has some air beneath on both sides of the screen (i dont really care some much cause it's hardly visible when the screen is turned on).
It doesn't protect the front camera sadly enough, the touch responsitivity feels great though.
so despite all its flaws i still give a 7/10.
I added some oldschool screenprotector foil that I cut with scissors on the front camera that is not covered by the just in case screenglass.
Edit: This stuff has arrived now! I like the Imak case. It's anti skid & offers good camera protection. The other case (perfect brush texture with so called "anti slip" looks better but feels bad to hold in hand. It does not offer camera protection and is not anti slip at all!
I ordered the same brand but mine is the matte black sandy feel.
I also order the iMak hydrogel film (front and back) since I really hate normal screen protector and tempered glass.
Film protectors (a la clearcoat/zagg/ishield) are not visible and will cover most of the screen including the edges.
https://www.aliexpress.com/item/2pc...-c62b-43f8-8513-c4ff815bdfb1&rmStoreLevelAB=5
I don't have the camera lens protector though. :/ I'm considering that since Moto likes putting a coating on their camera lenses (which scratches in time) though you can remove them completely by rubbing gently with toothpaste/baking soda.
This happened to my old Moto Z.
Btw, the case I used has a good camera lens protection. It is actually raised a little bit so you can put your phone on a flat surface without worrying.
why do you hate glass, and whats so good about gel?
good glass has great touch responsitivity,
will feel just as slippery as normal glass (are there really people that like nongreasy unslippery touchscreen?),
and protects against breaking.
my current case raises the camera as well but not enough. the only ones that raise it significantly are probably those bulky book cases.
i'll probably have to raise it myself by using superglue and putting some pieces of rubber on the inside of the screenprotector.
Since most phones these days (including Moto) are using 2.5D glass, the edges are curved and tempered glass can't cover the edges. In my past Moto phones (or just any other phones), tempered glass manufacturers will either
- make a tempered glass with maximum coverage (with obvious halo effect/ tempered glass not sticking to the edges)
or
- tempered glass won't cover the edges and can't even cover the whole display (assuming the side bezels are slim).
The film will protect the whole display and looks invisible as if there is no protection whatsoever.
I'm not too worried about breakage coz I am using a case.
Update: I received the iMak hydrogel films for the front and back. I haven't installed them yet but I'm now disappointed. The films will cover more than the glass front and back!
I'll update again once I installed it on my phone.
Anyway, this is better than the plastic screen protector I'm using now.
pietpietersen: Just wondering where you purchased the screen protector that you already had?
And if anyone can provide links to tempered glass screen protectors that have hit their phones well, I would appreciate it. I keep reading reviews on Amazon saying that some of them dont fit right.
Double post! Sorry!
marxela said:
pietpietersen: Just wondering where you purchased the screen protector that you already had?
And if anyone can provide links to tempered glass screen protectors that have hit their phones well, I would appreciate it. I keep reading reviews on Amazon saying that some of them dont fit right.
Click to expand...
Click to collapse
I got the TGSP, pictured below, for the wife's X4.
It does cover the entire screen, side to side and is really hard to get it centered, side to side, because it is virtually the same width as the display.
It's cut really close to the button, camera and sensors, which also makes it difficult to get good placement.
It had the best reviews, on amazon, by far.
I really hate curved edge phones!
Triple post! Wth?
So sorry! I don't know what happened!
marxela: i got mine at smartphoneshop.be (or. nl) so its not gonna be cheap to buy or have it shipped outside of belgium/netherlands.
pizza Pablo's looks easier to place than mine, cause mine had only a tiny microphone cutout. anyway, im happy mine feels smooth to touch/swype on.
Update: Do NOT buy the iMAK hydrogel film for Moto X4. It's useless. The front and back films do NOT fit the phone itself. It's like the cutout is for an enlarge version of Moto X4!
So I have no choice but to go naked on my front screen.
ijuanp03 said:
Since most phones these days (including Moto) are using 2.5D glass, the edges are curved and tempered glass can't cover the edges. In my past Moto phones (or just any other phones), tempered glass manufacturers will either
- make a tempered glass with maximum coverage (with obvious halo effect/ tempered glass not sticking to the edges)
or
- tempered glass won't cover the edges and can't even cover the whole display (assuming the side bezels are slim).
The film will protect the whole display and looks invisible as if there is no protection whatsoever.
I'm not too worried about breakage coz I am using a case.
Update: I received the iMak hydrogel films for the front and back. I haven't installed them yet but I'm now disappointed. The films will cover more than the glass front and back!
I'll update again once I installed it on my phone.
Anyway, this is better than the plastic screen protector I'm using now.
Click to expand...
Click to collapse
Have you applied the imak hydrogel film? How does it fit? I am planning to order the same.
Edit: Got the answer. I won't order it, thanks.
I did successfully install the hydrogel film. Even if it does fit, the quality is really poor. It's like a cheap version of IQ shield or Clear Coat. There are a lot of creases and very fingerprint magnet.
I went to mobile outfitters and have my front screen installed with matte film. Problem solved.
The protector from the gadgetshieldz covers the lens, screen and body of the moto x4. I have previously used their screen protector on my moto g4. But now for my x4, I got the skins.
https://www.gadgetshieldz.com/motorola-moto-x4-screen-protectors-cases-covers.html
azriel22 said:
The protector from the gadgetshieldz covers the lens, screen and body of the moto x4. I have previously used their screen protector on my moto g4. But now for my x4, I got the skins.
https://www.gadgetshieldz.com/motorola-moto-x4-screen-protectors-cases-covers.html
Click to expand...
Click to collapse
You stated what areas are protected, but what do you think of it?
pizza_pablo said:
You stated what areas are protected, but what do you think of it?
Click to expand...
Click to collapse
If someone is looking to stay away from the scratches and doesn't want to show that something is been applied on the screen camera or body. They can go with this.
I am using Nillkin frosted case for Moto X4. It's perfect for those who hate bulky cases as I do. The fit is accurate, also it protects camera bump. Case quality is very good, no doubt it will last long.
Nillkin screen protector (clear) for Moto X4 was included in the box. I bought it from AliExpress for $4.59.
http://s.aliexpress.com/r2yIZ3UN?fromSns=Copy
(Now price seems to be increased, you may check other sellers for lower price)
hi,
just got a bad tempered glass screen protector, and i can see that some of you guys are using film.
does it protect as good as tempered glass when your phone fall? can you pls share feed back?
i don t want to have to sell a kidney in case my mate 20 fall on the wrong side
thxx for your time
Film protector. Glass protectors are just bad for curved screens. Fingerprint doesn't work with them either
Just arrived full cover tempered glass with working fingerprint scan sensor juchuuu
Here we go
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/113330949523
funny thing.
my fingerprint sensor doesn t work with the screen protection. i ve removed the stored fingerprint, but i ve been able to recreate one with the tempered glass.
funny enough, even it has been able to recreate the whole finger, it still doesn t work. any idea why?
nocomp said:
funny thing.
my fingerprint sensor doesn t work with the screen protection. i ve removed the stored fingerprint, but i ve been able to recreate one with the tempered glass.
funny enough, even it has been able to recreate the whole finger, it still doesn t work. any idea why?
Click to expand...
Click to collapse
Because finger scan isn't compatible with mostly tempered glasses.
Buy this glasses what I mention above abd fingerscan will working good
Reuben_skelz92 said:
Film protector. Glass protectors are just bad for curved screens. Fingerprint doesn't work with them either
Click to expand...
Click to collapse
I have a plastic screen protector on my mate20pro (not the wet installation one) and it covers my screen 100%.
I bought from ebay uk for £1.89.
Finger print work perfect, smudges come out pretty easy.
edward78 said:
I have a plastic screen protector on my mate20pro (not the wet installation one) and it covers my screen 100%.
I bought from ebay uk for £1.89.
Finger print work perfect, smudges come out pretty easy.
Click to expand...
Click to collapse
was it the same as these ones? https://www.ebay.co.uk/itm/5-X-For-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
buxz777 said:
was it the same as these ones? https://www.ebay.co.uk/itm/5-X-For-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Click to expand...
Click to collapse
Yes, that's the one, only think the cut out was different (seller said the batch he has is a bit different than the photo) ,
For folks asking about a good tempered glass screen protector that works with the fingerprint scanner, I found the perfect one! I've registered 2 fingerprints and both work every time. It's a dome glass kinda thing where it comes with an adhesive glue and a UV light that cures the whole thing in a minute. And it's cheap as hell for $10.
I got it from Amazon : NI-SHEN Compatible Huawei Mate 20 Pro Screen Protector Tempered Glass,Screen Protector Compatible Mate 20 pro, 9H Hardness,No Bubbles,NO Scratch (Case Friendly) https://www.amazon.com/dp/B07L5KFXVK/ref=cm_sw_r_cp_apa_i_8VOlCbWTTKCHS
mike2518 said:
For folks asking about a good tempered glass screen protector that works with the fingerprint scanner, I found the perfect one! I've registered 2 fingerprints and both work every time. It's a dome glass kinda thing where it comes with an adhesive glue and a UV light that cures the whole thing in a minute. And it's cheap as hell for $10.
I got it from Amazon : NI-SHEN Compatible Huawei Mate 20 Pro Screen Protector Tempered Glass,Screen Protector Compatible Mate 20 pro, 9H Hardness,No Bubbles,NO Scratch (Case Friendly) https://www.amazon.com/dp/B07L5KFXVK/ref=cm_sw_r_cp_apa_i_8VOlCbWTTKCHS
Click to expand...
Click to collapse
I am using the same tempered glass and I can confirm that its case friendly and works with UAG Plasma, Spigen Rugged Armor and Ringke Fusion X. Fingerprint sensor also works without any issues.
whell i had templed glass pan cover landed on the edge where is the buttons its cracked the protector and the glass of the phone too.
best glass is uv glass here link ask seller send case friendly glass: https://www.aliexpress.com/item/UV-...783.html?spm=a2g0s.9042311.0.0.13bf4c4dsoDldb
but its not cover the sensor / notch area...
regural full glass its good protection of the notch but dust colected inside the camera and sensors and caseses not fit need cut the sides..
and film only protect with scraches..
Tempered glass protectors in which you have to cure the glue using UV lights fits well on the edges. Had ordered one from aliexpress & got installed flawlessly. No problems with ringke fusion x case too.
abhifusion said:
Tempered glass protectors in which you have to cure the glue using UV lights fits well on the edges. Had ordered one from aliexpress & got installed flawlessly. No problems with ringke fusion x case too.
Click to expand...
Click to collapse
since it uses glue, what if you cracked the protector? can you easily get it off the screen without any damage to the screen?
tweedie said:
since it uses glue, what if you cracked the protector? can you easily get it off the screen without any damage to the screen?
Click to expand...
Click to collapse
It's not very powerful adhesive glue, you can easily remove the screen protector even reapply it provided you have another bottle of glue. Check youtube, there are many videos on the same topic.
mike2518 said:
For folks asking about a good tempered glass screen protector that works with the fingerprint scanner, I found the perfect one! I've registered 2 fingerprints and both work every time. It's a dome glass kinda thing where it comes with an adhesive glue and a UV light that cures the whole thing in a minute. And it's cheap as hell for $10.
I got it from Amazon : NI-SHEN Compatible Huawei Mate 20 Pro Screen Protector Tempered Glass,Screen Protector Compatible Mate 20 pro, 9H Hardness,No Bubbles,NO Scratch (Case Friendly) https://www.amazon.com/dp/B07L5KFXVK/ref=cm_sw_r_cp_apa_i_8VOlCbWTTKCHS
Click to expand...
Click to collapse
I am looking to buy this screen protector but the seller does not ship to France...is there an other supplier or is there any other brand based on the same principle of using glue and UV light? Are there any other curved glass screen protectors who work well with the finger print reader? Bought a Mate 20 pro used and the display has already multiple fine scratches not visible/disturbing during use but it still annoys me big time. I have the impression that the display on the mate 20 is less resistant against scratches, comparing with the Mate 9 - now sold - and my Mate 10 who never seen a screen protector, I have only used them with the OEM flipcovers.
I am currently using this TG and it fits well and is very case friendly. I've been changing cases from time to time between Fusion X, Rugged Armor and Liquid Crystal and never had any issues with the glass. No issue with the fingerprint scanner as well and the Oleophobic coating of this glass is great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dfwfreaks said:
fingersprint sensor not woek with tempered glass screen protector
Click to expand...
Click to collapse
If the TG is not full glue adhesive-type the FPS won't really work because others aren't full adhesive and adhesives are only on the edges which means that the center area including the FPS area do not really touch the the screen of the Mate 20 Pro. As I have said mine works flawlessly since its a full glue adhesive-type glass protector. Please refrain from spreading misinformation here.
Using LENSUN Nano Flexible Self-Restore Full cover protective film
One one the best screen protectors the ultrasonic functional like without of the film. Is not the cheapest one but the quality is the highest one of all protectors which I have ever used.
Hi, the alinsea is incredible
I was affraid about the comment, because people dont use the product correctly. The tuto video is perfect. You can buy it for your mate 20 pro:
https://www.amazon.fr/Alinsea-Protection-Couverture-Maximale-Anti-Rayure/dp/B07K6DX3WZ
You can finish the protection with the spigen rugged armor:
https://www.amazon.fr/Spigen-Anti-Choc-Résistante-Carbone-L34CS25064/dp/B07GRMYK6L
The best combinaison !
iznogoud69 said:
Hi, the alinsea is incredible
I was affraid about the comment, because people dont use the product correctly. The tuto video is perfect. You can buy it for your mate 20 pro:
https://www.amazon.fr/Alinsea-Protection-Couverture-Maximale-Anti-Rayure/dp/B07K6DX3WZ
You can finish the protection with the spigen rugged armor:
https://www.amazon.fr/Spigen-Anti-Choc-Résistante-Carbone-L34CS25064/dp/B07GRMYK6L
The best combinaison !
Click to expand...
Click to collapse
I'm using the Alinsea glass screen protector too. I was worried at first as I've never installed one before with uv glue. Heard all the stories/reviews about the glue going everywhere but it was soo easy. I was quite proud of myself lol. Phone feels so good now compared to when I had the Newzerol tpu one installed which wasn't bad but glass feels so much better and screen looks better now too.
Sent from LYA LYA Ya Bums on Fire