Related
Hi all!
One thing drives me nuts about my wife tab - it turns screen on in the middle of the night, I guess when battery is completely charge.
Is there any way to disable or completely remove this behavior?
I use AutomateId to disable sounds, but there is nothing to turn off screen completely.
I checked few custom roms and do not see one fixing this problem. So, any suggestions will be appreciated!
Keep the tab switched off while charging
ansonantonym said:
Keep the tab switched off while charging
Click to expand...
Click to collapse
Uh, yeah. That'dprobably do it. ;-)
On a somewhat related note... Is there a danger of overcharging? It always says, "Device fully charged. Please unplug charger." Is it unreasonable to expect smart charge capability?
Sent from my GT-P7510 using xda premium
That is an option, unless you need it on for something else, like an alarm in the morning ;-)
However, sumsung phones developers let say, were able to work around in custom roms, so I was in hope, that may be I missed something...
JM_I said:
Uh, yeah. That'dprobably do it. ;-)
On a somewhat related note... Is there a danger of overcharging? It always says, "Device fully charged. Please unplug charger." Is it unreasonable to expect smart charge capability?
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
the message to unplug is purely an energy saving measure. It doesn't mean unplug from the tab, it means unplug from the wall to prevent "vampire power drain".
I agree about it being sodding annoying, though; the point of charging overnight is that it's fully charged come morning not fully charged at, say, 1am and partially drained by morning! /rant
chaosdefinesorder said:
the message to unplug is purely an energy saving measure. It doesn't mean unplug from the tab, it means unplug from the wall to prevent "vampire power drain".
I agree about it being sodding annoying, though; the point of charging overnight is that it's fully charged come morning not fully charged at, say, 1am and partially drained by morning! /rant
Click to expand...
Click to collapse
Ah, well... Aside from being somewhat econazi-ish, that makes sense. The "wake-up-on-full-charge" thing doesn't really annoy me too much because it's in the case almost all the time. Closed cover = no problems.
CNemo7539 said:
Hi all!
One thing drives me nuts about my wife tab - it turns screen on in the middle of the night, I guess when battery is completely charge.
Is there any way to disable or completely remove this behavior?
I use AutomateId to disable sounds, but there is nothing to turn off screen completely.
I checked few custom roms and do not see one fixing this problem. So, any suggestions will be appreciated!
Click to expand...
Click to collapse
Wow! I thought I was the only one. This drives me nuts! I just thought it was one of those random custom ROM bugs. I'd love a fix because then I could just set my setCPU profile to clock down when the screen is off, but since it comes on, I have to make more complicated settings (or else it overheats inside the case!).
I think I figured it out by a chance...
There setting "Never turn screen off when charging" or something like this. I do not have tab in front of me.
Removed that check and didn't see screen on this night.
If it help to anybody else please post here to confirm.
CNemo7539 said:
I think I figured it out by a chance...
There setting "Never turn screen off when charging" or something like this. I do not have tab in front of me.
Removed that check and didn't see screen on this night.
If it help to anybody else please post here to confirm.
Click to expand...
Click to collapse
If you figure out where the setting is will you update this thread? Also, update the OP to make it useful to others (including me!)
settings>applications>developments>stay awake, unmark the box, I hope your problem will end. I unmarked it as soon as I got my P7500 while checking settings and never experience this.
I have this option unchecked as well. I can confirm that the tablet turns on when it is completely charged and then goes back to sleep after a short while again.
Regards
Achim
Yeap, it does that. But like you said it shut the display in a short while, if it the option unchecked.
It's usually disabled in custom roms but if you have the skills and time try to make it yourself, although it's annoying that at 4am you hear the tablet buzzin' you that it's fully charged...
I had the same screen switching on over night problem with stock 3.1 ROM.
The tab switched on automatically, and never switched off.
It happened while it was charged and while was not charged, or after rebooted.
I work in front of the tab, and it switched on more and more often.
Once I set the screen off time to another, shorter value, it solved the problem for that afternoon, but in the morning the screen was on again.
Finally I removed 50 rarely used apps, and the problem is almost fixed. It happened only once since then. I think I permitted some app to administer the device in the menu, and those caused this.
sedward said:
I had the same screen switching on over night problem with stock 3.1 ROM.
The tab switched on automatically, and never switched off.
It happened while it was charged and while was not charged, or after rebooted.
I work in front of the tab, and it switched on more and more often.
Once I set the screen off time to another, shorter value, it solved the problem for that afternoon, but in the morning the screen was on again.
Finally I removed 50 rarely used apps, and the problem is almost fixed. It happened only once since then. I think I permitted some app to administer the device in the menu, and those caused this.
Click to expand...
Click to collapse
I think my screen problem is also related to the multimedia dock. When the tab is in the dock and the dock is NOT connected to the charger, then few times it switches on the screen after some time.
I put my tab into silent mode and close the cover.
No noise no light.
Alarm still makes noise even in silent.
But there really should be an option to turn this off.
The past two mornings when I wake up my prime was shutdown and a simple power on does not do the trick. I just start hitting volume and the power button and it eventually powers on.
Anyone else having this issue?
Sleep of Death?
Sent from my ADR6300 using Tapatalk
RussianMenace said:
Sleep of Death?
Click to expand...
Click to collapse
Not again...
Did you upgrade the firmware?
dhonzik said:
Did you upgrade the firmware?
Click to expand...
Click to collapse
Yes. Itdidnt happen the first night. The next 2 it did.
anymore feedback on this? is there a way to avoid it? is my device simple plagued with it for life?
oasis9389 said:
The past two mornings when I wake up my prime was shutdown and a simple power on does not do the trick. I just start hitting volume and the power button and it eventually powers on.
Anyone else having this issue?
Click to expand...
Click to collapse
I've had it happen to me a couple of times. This is very similar to what happened with my transformer, but very much less frequency. Basically when it goes on standby and locks the screen, and you move to a different location, it won't wake back up. You have to hold the button for 30 seconds to shut it down and power it back up. This isn't a major problem and will probably be fixed with future updates. I am worry about my other problems, GPS, sluggishness, and wifi signal is still really week. When it's good it's really fast, but when I'm in an area of my house (the toilet) weak ass signal!
nxp3 said:
I've had it happen to me a couple of times. This is very similar to what happened with my transformer, but very much less frequency. Basically when it goes on standby and locks the screen, and you move to a different location, it won't wake back up. You have to hold the button for 30 seconds to shut it down and power it back up. This isn't a major problem and will probably be fixed with future updates. I am worry about my other problems, GPS, sluggishness, and wifi signal is still really week. When it's good it's really fast, but when I'm in an area of my house (the toilet) weak ass signal!
Click to expand...
Click to collapse
yea so that is my question.. this is not something to return it for? it could be fixed with an update?
oasis9389 said:
yea so that is my question.. this is not something to return it for? it could be fixed with an update?
Click to expand...
Click to collapse
They fixed the transformer with an update. Can't guarantee anything but most likely it will be.
nxp3 said:
They fixed the transformer with an update. Can't guarantee anything but most likely it will be.
Click to expand...
Click to collapse
cool thanks.
This is exactly what I came here looking for. Mine arrived this morning and worked fine all day and now it won't wake up... Since I've had it for less than 12 hours, I wasn't entirely happy, but at least I'm not the only one with the issue and I'm sure Asus will correct it... at least I hope so, lol
+1 on this issue.
while sleeping it shuts down. It can be turned back on by holding the power button, but at that point it has to start back up again, not just come out of sleep mode.
2 days ago, I woke up, this happened to tablet - it was off. I am on ICS mind you. It was not battery as when I restarted, it had 44%.
I was a little freaked out as I had to hold down the power button for longer than normal it seemed to get it to come on.
Very strange.
I had this happen for the first time yesterday. I used the reset hole with a paper clip. The reset hole is the one on the left side under the SD card slot, not the hole on the top near the camera.
my email to Gary Key:
Is the 9.4.2.13 update expected to fix the shutdown issue that is
separate from crash/restart issue?
I do not experience crashes but my unit will read as an empty battery
when it is sleeping and shutdown. When started back up the battery
level is fine.
His response:
It should also address this problem. We had two units returned with
this problem and the update cured both of the units. I cannot 100%
guarantee it at this point until we collect additional data but
hopefully it will work fine for you. Ensure you are on AC when the .13
update is started. After the completion of the update. Please shutdown
the unit and do a full power on cycle.
I am still having the sleep/shutdown issues after updating to 9.4.2.13.
GK requested I do a full system reset (dont know if its different from factory reset in the settings but they sent instructions that takes you to the cold boot menu with the wipe data icon and then you wipe data) and update the included apps.
if this doesnt work, will have to send it in.
I can still return as well, but everything else is working (including GPS) so I hate to return it. And as of now amazon is only refund anyway so Id have to find a replacement elsewhere.
Love the smell of napalm in the morning.
after the .14 update, I am still getting shutdowns.
I downloaded the update, then cold booted, then installed, then cold booted again.
anybody else still experiencing this??
Hello,
After the latest OTA release (9.4.2.13) I am having the following issues:
- Putting tablet into sleep mode (unit on, screen turned off) with WiFi off causes
tablet to shut off after approx. 10-15 minutes. To turn tablet back on I have to hold the
power button in for approx. 10 seconds.
Before this update I NEVER had this problem. WiFi is set to always stay on in Settings.
This also occurs if I set to turn WiFi off when the screen if off (in Settings).
- The battery seems to be discharging much faster now. Before the update, the battery
would last approx. 7-8 hours under normal use (web surfing, email, etc). Now, I'm lucky if I get 5-6 hours.
I currently do not have any emperical evidence to back this up. It just
seems to be draining faster. I will check to see if an app or some process
may be causing this issue.
This latest update has really annoyed me given these issues. I had none
of the issues that this update is supposed to fix (lockups, reboots, Wifi problems).
Up to this point, I have really loved this tablet. Now, I think about its problems every time I use it.
Please fix these issues and give us a tool that will allow us to revert back to older firmware releases.
Thanks for listening.
-Paul
pmuch12345 said:
Hello,
After the latest OTA release (9.4.2.13) I am having the following issues:
- Putting tablet into sleep mode (unit on, screen turned off) with WiFi off causes
tablet to shut down. To turn tablet back on I have to hold the power button in for approx. 10 seconds. Before the update I NEVER had this problem. WiFi is set to always stay on in Settings.
l
Click to expand...
Click to collapse
So you have wifi off and the setting for wifi to always be on in settings and it locks up. If you turn wifi on does it not lock up? I tried to duplicate the problem but could not. I turned off wifi on settings and was able to sleep and power on the device without troubles. (For the record Bluetooth was also off.) I believe you are having a problem but do not think the root cause is what you suspect. Maybe it is a program you have installed that I do not or vice versa. If you can hook your tablet up to a computer and capture a logcat perhaps something will show up.
Alternatively is it maybe how long you let it sleep? I only left it off for the count of ten.
Sent from my Transformer Prime TF201 using Tapatalk
I turn Wifi off prior to putting tablet into sleep mode to save on battery power.
I have not tried to leave WiFi on while in sleep mode. I will try this.
It seems to me, whether WiFi is On or Off when putting the tablet
into sleep mode should not cause the tablet to turn off after a short period
of time.
I will have to test, but the tablet is in sleep mode for at least 10-15 minutes
when it shuts off.
BTW, I never had this issue prior to this OTA release. I would be really
surprised if an application is causing this issue.
Thanks
I'm not having this issue and never had it, just like the last post says it can be caused by some application, what if you guys share the list of installed apps with some app like App Dragon App Lister (free in the market) then you can find if there are something in common, Are your primes rooted? mine is not.
regards
After the OTA i get this problem that restart every 10-15 minutes. I has been happening it me and i have been blaming the dock but now i see is the OTA that has cause this problem. Come on Asus, u can do better than this.
Yep, there IS an issue.
Last use last night was at 11:45pm and I was at 67% and at 7:07 I was at 44%. 23% overnight and while in deep sleep AND I use Tasker to shut Sync and BT and Wifi off at 10:30 pm IF they are on and I never use IPS and I am usually in Power Savings mode, so you cannot blame it on these things. Not good!
Better Battery shows AlarmReceiver as highest battery user at a mere laughable 2.8%
BUT CPU Spy shows 5:35 time in 475 clock speed... And since no other apps are clelarly burning my battery... it must be this low end 475.
Thanks Asus for (1) taking back the 1400 you gave us (2) taking back lower end 102-375 speeds I would use (3) forcing us to sit at 475 when we could be lower (4) giving me a battery drain issue I never had. Thanks
Confirmed, I am experiencing the same issue. Had to cold boot wake up after routine sleep mode this morning. Note battery dropped 50% while unused.
Sent from my Transformer Prime TF201 using Tapatalk
If you want it to go to Gary, PM him.
---------- Post added at 05:43 PM ---------- Previous post was at 05:33 PM ----------
Lock-N-Load said:
Yep, there IS an issue.
Last use last night was at 11:45pm and I was at 67% and at 7:07 I was at 44%. 23% overnight and while in deep sleep AND I use Tasker to shut Sync and BT and Wifi off at 10:30 pm IF they are on and I never use IPS and I am usually in Power Savings mode, so you cannot blame it on these things. Not good!
Better Battery shows AlarmReceiver as highest battery user at a mere laughable 2.8%
BUT CPU Spy shows 5:35 time in 475 clock speed... And since no other apps are clelarly burning my battery... it must be this low end 475.
Thanks Asus for (1) taking back the 1400 you gave us (2) taking back lower end 102-375 speeds I would use (3) forcing us to sit at 475 when we could be lower (4) giving me a battery drain issue I never had. Thanks
Click to expand...
Click to collapse
Your post was on the right track until I read your last paragraph. So unnecessary. I like your perspective to be able to hold Asus accountable/responsible in making sure our primes work like we want it to -- but all your posts end up soiling the conversation, and it's not just one or two, its all of them. Help us out here...please
So does anyone know if there is a way to revert back to the .11 update? That seemed to work the best for everyone and it'd be great to just go back to a working update.
Just to pile on, I am also seeing battery usage and awake time when it should be sleeping where as before everything was fine.
Battery was 76% last night in balanced mode before i went to bed. Woke up this morning at 8am and battery is dead, Never had an issue before this new update
pmuch12345 said:
I turn Wifi off prior to putting tablet into sleep mode to save on battery power.
I have not tried to leave WiFi on while in sleep mode. I will try this.
It seems to me, whether WiFi is On or Off when putting the tablet
into sleep mode should not cause the tablet to turn off after a short period
of time.
I will have to test, but the tablet is in sleep mode for at least 10-15 minutes
when it shuts off.
BTW, I never had this issue prior to this OTA release. I would be really
surprised if an application is causing this issue.
Thanks
Click to expand...
Click to collapse
The battery savings may or may not be valid. I am not trying to judge on battery savings or use. What I am trying to do is narrow the scope of the lock problem and determine steps to reproduce the lock. This makes it easier to avoid the problem as a user and fix the problem as a developer. I am sure that it involves the OTA update. What I am suggesting is that, without the ability to reproduce it probably involves more than just the OTA update alone.
Does that make sense?
Sent from my Transformer Prime TF201 using Tapatalk
JanetPanic said:
What I am trying to do is narrow the scope of the lock problem and determine steps to reproduce the lock.
Click to expand...
Click to collapse
You've touched on the cruxt of the issue. It appears that not all Prime's behave the same way. Prime's that were fine before the update are broken and those that were broken now work. Since the h/w's all the same, it really is a curious issue.
pmuch12345 said:
Hello,
After the latest OTA release (9.4.2.13) I am having the following issues:
- Putting tablet into sleep mode (unit on, screen turned off) with WiFi off causes
tablet to shut off after approx. 10-15 minutes. To turn tablet back on I have to hold the
power button in for approx. 10 seconds.
Before this update I NEVER had this problem. WiFi is set to always stay on in Settings.
...
-Paul
Click to expand...
Click to collapse
I have this same behavior only after a minute of manually or auto-timeout screen off.
* No problems with .11
* Installed OTA update, lockup in sleep mode started
* Uninstalled Flash and Dolphin Browser JIC, problem remained
* It is a lock up not power down. Have to hold power button 10 sec
* I can wake with power button within a minute or so
* Wifi on or off
* If I force screen to never shutoff it stays working fine as it never goes to sleep
* If I manually power down, it will power up normally
-Robert
Rather than making us wait a month for another "fix," Asus should do the right thing and give those of us who had no problems on the old FW a way to revert back. This is bogus.
Lock-N-Load said:
Thanks Asus for (1) taking back the 1400 you gave us (2) taking back lower end 102-375 speeds I would use (3) forcing us to sit at 475 when we could be lower (4) giving me a battery drain issue I never had. Thanks
Click to expand...
Click to collapse
Do you think there could be inconsistencies in the SoC? Teg3 was delayed and people were speculating that it was due to fabrication issues. It's an extremely complex design and it's odd that some devices experience issues when others don't. It could be other h/w that's inconsistent but there's nothing earth shatteringly different in the Prime other than the SoC. Just something to think about...
I can confirm lockups and reduced battery life after the update though I do not have any solid information to say what is causing it. Prior to the update I could go most of my day at work using the tablet very mildly and get home with 80% or so. Now I'm home for lunch and I'm sitting at 70% with 5 hours left in my work day. I've also experienced two lockups today and have to hold the power button for 10-15 seconds before it will boot up. I'm not incredibly worried about it, I feel like these issues will be ironed out more easily than wifi and gps issues. ; )
Sent from my Transformer Prime TF201 using Tapatalk
BarryH_GEG said:
Do you think there could be inconsistencies in the SoC? Teg3 was delayed and people were speculating that it was due to fabrication issues. It's an extremely complex design and it's odd that some devices experience issues when others don't. It could be other h/w that's inconsistent but there's nothing earth shatteringly different in the Prime other than the SoC. Just something to think about...
Click to expand...
Click to collapse
I agree, I think alot of these issues (aside from backlight bleed and GPS) have a direct correlation to Tegra3. I think the market has something to say about that too though -- how many other Tegra 3 tablets are there? When is the next non-Asus tegra 3 tab coming out? Not until May/June...
Honestly, I don't think Tegra3 does too well with CPU frequency stages. Then you have ICS on top, which is new as well. The combination could be disastrous. I'm not surprised there is issues, Asus is doing a good job staying afloat though.
Other OEMs are looking at how Asus is proceeding with this and are learning. But Asus has the advantage. They have the closest relationship with nvidia than anyone else does (I'm speculating) and thus is brings them closer to the Apple model, where control is maintained throughout all the levels of the tablet experience (App ecosystem, OEM, SoC)
Agreed, how to revert back to working binaries!
BarryH_GEG said:
You've touched on the cruxt of the issue. It appears that not all Prime's behave the same way. Prime's that were fine before the update are broken and those that were broken now work. Since the h/w's all the same, it really is a curious issue.
Click to expand...
Click to collapse
This not completely true statement. Gary already explained exactly what the update did. Raising the lower clock doped doesn't mean a broken prime...lol. my prime still works just fine after update. Yes, some are experiencing issues after update but not all. So to assume all that were fine before update are now broken is incorrect.
First off, I'm rooted and have already patched my Omate TrueSmart Developer Edition with Lokifish Marz's security patch.
Device: 1900 1/8 TrueSmart Dev Edition
ROM/Firmware version: Latest
Changes made to stock firmware (if any): A few Xposed mods
Issue: See below, freeze, drain, screen not functioning.
Steps Taken: Restart, antivirus check
One day I turned my TrueSmart on (while off my wrist), went back about 15 minutes later to it and the screen wouldn't turn on. I though "Ahh, that's strange. I thought I turned this on." I pressed the power button multiple times to try to turn it on. It was already on, but the display would not turn on. The battery was charged already and at about 85%. I held the power button and felt the haptic feedback - no screen on.
Earlier that week, I'd noticed that the TrueSmart's battery was draining a bit faster than usual on WiFi alone, no SIM or GPS on. When the screen wouldn't work, I held down the power button for about 10-16 seconds (some Android Devices will restart, but not all, so I gave that a shot). - Nothing. I then left it alone for a day (didn't feel like playing with it after a long and busy work day). I tried to turn on the screen - nothing. I still got haptic feedback so I knew it was on. "Crap - now I have to void the warranty by doing a battery pull." Removed the screws, found the crappy water seal, did a battery pull, and turned the device back on. Screen worked - phew. The past two days it had been draining rather fast and the watch was overheating even though I kept it in about room temperature conditions.
I thought something was up so I ran avast! Anti-virus (I'm not playing the Linux OS' don't need antivirus software game - so let's not go there.) and the definitions/database took over two minutes to update (usually just 15 seconds) on a strong WiFi connection - strange. I ran the scan - nothing showed up but the scan mysteriously kept going away and I had to restart the scan a few times. Finally it worked even though I had to turn my WiFi on the watch off.
My question is - am I being completely paranoid or has my watch been hacked? Fast battery drain, connection issues, screen not responding, overheating - those are signs of spying and wiretapping, am I wrong? For the time being I removed the battery so that way if I am being spied on or hacked, the watch can't be powered on.
I've had the watch for only a few weeks, never installed any strange apps - all legit stuff. Am I crazy :silly: or is this something to be worried about?
deedscreen said:
First off, I'm rooted and have already patched my Omate TrueSmart Developer Edition with Lokifish Marz's security patch.
One day I turned my TrueSmart on (while off my wrist), went back about 15 minutes later to it and the screen wouldn't turn on. I though "Ahh, that's strange. I thought I turned this on." I pressed the power button multiple times to try to turn it on. It was already on, but the display would not turn on. The battery was charged already and at about 85%. I held the power button and felt the haptic feedback - no screen on.
Earlier that week, I'd noticed that the TrueSmart's battery was draining a bit faster than usual on WiFi alone, no SIM or GPS on. When the screen wouldn't work, I held down the power button for about 10-16 seconds (some Android Devices will restart, but not all, so I gave that a shot). - Nothing. I then left it alone for a day (didn't feel like playing with it after a long and busy work day). I tried to turn on the screen - nothing. I still got haptic feedback so I knew it was on. "Crap - now I have to void the warranty by doing a battery pull." Removed the screws, found the crappy water seal, did a battery pull, and turned the device back on. Screen worked - phew. The past two days it had been draining rather fast and the watch was overheating even though I kept it in about room temperature conditions.
I thought something was up so I ran avast! Anti-virus (I'm not playing the Linux OS' don't need antivirus software game - so let's not go there.) and the definitions/database took over two minutes to update (usually just 15 seconds) on a strong WiFi connection - strange. I ran the scan - nothing showed up but the scan mysteriously kept going away and I had to restart the scan a few times. Finally it worked even though I had to turn my WiFi on the watch off.
My question is - am I being completely paranoid or has my watch been hacked? Fast battery drain, connection issues, screen not responding, overheating - those are signs of spying and wiretapping, am I wrong? For the time being I removed the battery so that way if I am being spied on or hacked, the watch can't be powered on.
I've had the watch for only a few weeks, never installed any strange apps - all legit stuff. Am I crazy :silly: or is this something to be worried about?
Click to expand...
Click to collapse
As long as the apps that you have installed are legit, you should be fine.
I guess my only concern would be...how long did you use the device before installing Loki's patch? Did you connect to any network prior? It's your BT on? Is it set correctly?
As far as the overheating and other issues...I had the same. When I went to the latest Operative 20140318v2, most of the issues fixed themselves. Now, the overheating happens only if I am on a call for more than 10min.
Battery issues have become almost not existent when I patched up. However, I did find that of you upgrade to SL PRO...the juice seems to run out quicker....
I would install a good battery app that monitors ALL processes and hardware using power. I was able to solve a few issues this way.
But, overall, I really don't think you're being watched.
Good luck....
Sent from my HTC One using Tapatalk
Well I already know you're crazy but...
Even with Ensec or Operative the firmware is still unstable. I randomly get greatly increased battery drain yet even when connected to WiFi with full packet logging nothing stands out as odd. The screen not waking up happens from time to time as well as soft locks are being caused by some apps. I suggest you install a system monitor app and see if a particular app is to blame. On one TS, G+ randomly sits there and updates the feed for hours without ever actually updating. One another, it's weather, then on yet another, no issues at all yet all three are on the same firmware and same patch version and option.
The probability that your TS is hacked is fairly low and I suggest looking at the more likely causes first.
Perfectly normal behavior of Android device
BTW - force (hard) restart on many Android device is vol up + power.
Vol down + power will take screen shot.
Of course, there's many Android devices so maybe that combo also works...
TS is half finished device and we are all lucky we have Loki here...
If we were depending on Omate that wouldn't be good...
I'm still waiting my October 2100 1/8 release and I'm quite sure I won't even open it...
I'll sell that and develop for something else...(don't like when someone treat me like idiot)
Sent from my C6903 using Tapatalk
funky0308 said:
I'll sell that and develop for something else...(don't like when someone treat me like idiot)
Click to expand...
Click to collapse
Hopefully another Android based smartwatch. Idea man has ideas.
Lokifish Marz said:
Hopefully another Android based smartwatch. Idea man has ideas.
Click to expand...
Click to collapse
Absolutely another smartwatch...
I was really patient with Omate but this is too much...
If I have to wait almost eight months for Xperia Z2 I would f***ed them off and that's device that will work fantastic from the box.
But to wait something eight months to have 30% finished device (in a hardware and software way) - naaah...I'm (probably) out...
That's too bad, I really liked that idea and specifications but, if anyone wants to be honest - it just don't worth all that "hype"...
To completely relay on XDA devs to fix tethering and paring, to patch their incapacities and mistakes...to found their company and then wait for them while they are selling watch (newer and better) for a months...
Way tooooo much for me...
Sorry guys for spamming thread
Sent from my C6903 using Tapatalk
@funky0308 - Totally hear you. Maybe the Neptune Pine (quite a bit larger but still) may be better when it's finally released. The TrueSmart is unstable in some ways.
Sent from my SGH-T999 using Tapatalk
deedscreen said:
@funky0308 - Totally hear you. Maybe the Neptune Pine (quite a bit larger but still) may be better when it's finally released. The TrueSmart is unstable in some ways.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Lokifish Marz said:
Well I already know you're crazy but...
Even with Ensec or Operative the firmware is still unstable...
Click to expand...
Click to collapse
Haha, we all are a bit crazy. Could make sense.
@mghtymse007 - I used it for a few days before the patch but I should do a factory reset and try to re-patch just to be extra safe.
Okay, I am having issues with my Note 3. I can run my phone as hard as i want and no problem until i get to about 50-60%. Then, my phone screen will just go black like the battery just died. Now if i plug it in for 1 second and hit the power button it starts booting up and i can immediately unplug it and it returns to 50-60% battery and continues to run fine. But it will not power up without plugging it in for a second. I even have a friend that is having the same issue with his att&t note 3 that has never been rooted ever. Just weird. I am currently running Vision-x vpucnc5 rom with calm kernal. I have tried multiple other roms and the problem still persist. I have even purchased another battery thinking that was the problem. I will include a screen shot of my battery info screen and all you see is a black line when it happened. Please help! Thanks in advance. .
When you run the device hard, is the phone getting hot? Do you have a big case on it? It sounds like the overheating sensor is kicking off the device. On my note 3, when running WiFi Tether Router app and it is downloading a big file say a movie. On 4g LTE at a download speed of 2MB+ the phone has gotten to hot and shut down. My solution is to take it out of the case when downloading.
Maybe plugging the charger into the device resets the overheating sensor?
Here is what I would do, here is a link to the Galaxy tool app http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 download and install. Now you test all the sensors, and check the logcats to see what happened at the black line. Your phone has record of it in the logcats, either in the IOTHIDDENMENU, or SYS_DUMP !!!
jimzweb1 said:
When you run the device hard, is the phone getting hot? Do you have a big case on it? It sounds like the overheating sensor is kicking off the device. On my note 3, when running WiFi Tether Router app and it is downloading a big file say a movie. On 4g LTE at a download speed of 2MB+ the phone has gotten to hot and shut down. My solution is to take it out of the case when downloading.
Maybe plugging the charger into the device resets the overheating sensor?
Here is what I would do, here is a link to the Galaxy tool app http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 download and install. Now you test all the sensors, and check the logcats to see what happened at the black line. Your phone has record of it in the logcats, either in the IOTHIDDENMENU, or SYS_DUMP !!!
Click to expand...
Click to collapse
Not really sure how to test the temp sensor. It seems from that app that my phone was at about 29 deg Celsius.
MRBULLRED said:
Not really sure how to test the temp sensor. It seems from that app that my phone was at about 29 deg Celsius.
Click to expand...
Click to collapse
There is a free app in the Google play store called the "Cpu Temperature" it gives you CPU temp and Battery temp in C/F. You might install it and run the device hard up to 50-60% and see what your temp is.
Don't forget to scroll through those logcats to see what happened at the black line.
Also I noticed your Screen is using some Battery, what is the preset on display time? Mine is 2 minutes then shuts off, I know if you run the display constantly they get hot.
jimzweb1 said:
There is a free app in the Google play store called the "Cpu Temperature" it gives you CPU temp and Battery temp in C/F. You might install it and run the device hard up to 50-60% and see what your temp is.
Don't forget to scroll through those logcats to see what happened at the black line.
Also I noticed your Screen is using some Battery, what is the preset on display time? Mine is 2 minutes then shuts off, I know if you run the display constantly they get hot.
Click to expand...
Click to collapse
Mine is set to 1 minute. The cpu temperature seems to stay around 100°F most of the time. However, after a random shutdown I noticed the temp was 140°F while booting it up right after the shutdown. Also. I uprooted and went back to stock NC5 yesterday. Still had the same problem today.
MRBULLRED said:
Mine is set to 1 minute. The cpu temperature seems to stay around 100°F most of the time. However, after a random shutdown I noticed the temp was 140°F while booting it up right after the shutdown. Also. I uprooted and went back to stock NC5 yesterday. Still had the same problem today.
Click to expand...
Click to collapse
My CPU temp is about 115F with WiFi Tether Router running pretty much all day. My Battery temp is 86F. My device feels cool to the touch, except just under the camera flash where the CPU is. What is your Battery temp at 50-60% ? Maybe you have a short in your Battery that creates excessive temp at the half way discharge point? Do you have access to another Battery to swap out and see if that has any effect?
jimzweb1 said:
My CPU temp is about 115F with WiFi Tether Router running pretty much all day. My Battery temp is 86F. My device feels cool to the touch, except just under the camera flash where the CPU is. What is your Battery temp at 50-60% ? Maybe you have a short in your Battery that creates excessive temp at the half way discharge point? Do you have access to another Battery to swap out and see if that has any effect?
Click to expand...
Click to collapse
First of all thanks so much for all your help.
My device feels cool to the touch all the time. Running candy crush seems to make it run at about 120f. Still feels cool to the touch. It happened with the battery that came with the phone so I bought another one thinking that was the problem. Do I buy a third?
MRBULLRED said:
First of all thanks so much for all your help.
My device feels cool to the touch all the time. Running candy crush seems to make it run at about 120f. Still feels cool to the touch. It happened with the battery that came with the phone so I bought another one thinking that was the problem. Do I buy a third?
Click to expand...
Click to collapse
No, I think two is enough. Check out this video https://www.youtube.com/watch?v=fls4NIRJ1IQ maybe this is the fix.
If not here is Sprint.com's suggestion, here is the link http://support.sprint.com/support/a...expectedly/WTroubleshootingGuide_542_GKB59231
jimzweb1 said:
No, I think two is enough. Check out this video https://www.youtube.com/watch?v=fls4NIRJ1IQ maybe this is the fix.
If not here is Sprint.com's suggestion, here is the link http://support.sprint.com/support/a...expectedly/WTroubleshootingGuide_542_GKB59231
Click to expand...
Click to collapse
Do you think this looks normal?
MRBULLRED said:
Do you think this looks normal?
Click to expand...
Click to collapse
NO, anything with Kim Kardashian in it is not normal. Lol As for the device that temp seems a little high, right now I am running 114F CPU and the Battery is 84F. The deivce is running WiFi Tether Router, plus a half dozen other apps, and charging. Let me hunt up the specs on the average operating temp on your CPU.
Hey if you get a chance try this. Go to settings/device/call and uncheck " Turn off screen during calls" the screen will stay on during calls. But if it doesn't go black then its the proximity sensor. It may be defective or may not deactivating because of a case.