Hello,
I was delivered my Onda v975m v3 with 1.0.8 firmware, and upgraded to 1.1.0 with no problems. I was happy with the performance, but after some time the problem started.
Namely after many hours of constant using my device just crashed with white screen and red message saying: "The machine has a serious error, need reboot to repair".
So it reboots, and everything seems to be ok...till next crash :/
After a few crashes it stopped to reboot, so i decided to flash official KitKat beta hopefully thinking that it will solve the problem.
But it didn`t, and moreover another issue appeared.
Now my internal SD card is broken. I don`t have an access to the storage, and have a permanent notification saying: "SD card damaged. You may have to reformat it".
Well it doesn`t look good at all, but device is still working and applications are able to run.
I was searching other forums looking for the similar problem, but it seems it is very first case of such an issue.
Do you have any idea either it is a hardware or (hopefully) some firmware problem? Is there anything I can do to fix it? Thanks in advance.
Related
Hi there! I've a really serious problem my friends. I hope you can help this problem and we fix it..
I've had in the past months, 60.53 mb health downloaded a system update without any problem. When I check to install, I got an error as shown below. During the installation, before the figure on the telephone icon with the two arrows pointing at each other process was conducted in a normal way. Located in the bottom 25% of the box a little, and then I added the image I get the error until the installation is done. This process several times, trying different methods (both shape applied factory reset, formatted sd card, the phone changed the language, etc.). Tried to install the update, but somehow I was unable to phone.
My device has been Britain and i'm live in Turkey, if it can have an effect??
What is the reason you think of this situation?
Faced with a problem like this before, that it was?
opps, i hope you get an answer today
Any progress?
Hi - I've got the same problem. Did you find a solution?
I hope this is the best place to post this. If not, I am very sorry. I have found a few posts with same message BUT all of them I found were when this happens after installing a rom or updating, etc...
I have a Virgin s2. I just have original stock rom, Ive done nothing at all to it. I changed out my batteries, turned it on, then after it got loaded I got a popup saying "unfortunately the process com.android.phone has stopped"! I restarted then as soon as i tried to do something, i received it again. I restarted again & didnt get message til I had opened google & was waiting for search results to come up when I got message saying something about couldnt find a mobile network (or something like that), then got the "unfortunately the process....." popup. It started popping up over & over, including when I got a phone call (which made it impossible to answer, however I was able to call them back okay). I have already tried:
taking out the sdcard;
booting into recovery then wiping the cache partition;
booting into safe mode.
The popup &problem still continued. Oddly, after my husband ran "CM Security" though it found no problems, it was a little bit before it did it again and even now it doesnt popup quite as often as it had been but it still is enough to probably make the day at work very aggravating lol.
Please say theres still some hope! I'm not able to buy another phone right now. I am capable of doing anything possible to save it if you just tell me what would be best to do. I saw somewhere when I searched Google say that installing a custom recovery would probably fix it. If so, please point me to where I can find all the necessary things &instructions I need. Or if it would be better to do a factory reset, please tell me how to do it on this phone (or if I just need to go to recovery & simply do it).
ALSO I do have an identical s2 except it is Sprint & I havent came across a detailed guide for flashing the s2 from Sprint to Virgin that doesnt require the newest paid version of cdma workship, which i cannot currently afford.
Thank you for your time & assistance.
FIXED (at least so far)!
SOLVED!!! (I hope:fingers-crossed
Went ahead & just backed up contacts to sd card, then did a Reset through Recovery. So far no "Unfortunately the process com.android.phone has stopped" message. :highfive:
gdownloads said:
SOLVED!!! (I hope:fingers-crossed
Went ahead & just backed up contacts to sd card, then did a Reset through Recovery. So far no "Unfortunately the process com.android.phone has stopped" message. :highfive:
Click to expand...
Click to collapse
Great to hear you fixed (or partially fixed) your problem. The problem with updating stock roms using OTA or kies is that sometimes a factory reset or clearing the cache is required to remove some left over apps or unneeded files that might potentially make your phone give errors (like the ones you were experiencing). It is highly unlikely it is a software issue, unless it was a dodgy download, moreover unfinished file deletion or unneeded files would have caused this to happen.
Any help or suggestion would be appreciated.
My device is Cherry Mobile Omega HD 2.0 (MT6589)
So here's my story:
I was texting while a message saying "Unfortunately, Messaging has stopped". I rebooted my device and what greeted me is a long message about Encryption Unsuccessful and a button for resetting my phone. I've never enabled encryption on my device. I tried tapping the button but nothing happens. I booted into recovery mode to factory reset but when I try, an error saying "Mount /data error" is all I get.
I tried searching online for a possible fix but I couldn't find anything! I'm trying to flash the stock rom on my device (I was running on stock rom when this happened. Yes, I'm rooted) but the pc doesn't seem to recognize my phone. I have a preload driver but it still won't recognize my device!
It still boots up until the encryption unsuccessful message and it still charges.
At this point, I'm already pretty desperate. :crying: I hope anyone could help or give suggestions! Oh, and if anyone could give me an idea on how could this have had happen to my device it would be very helpful. (I might have deleted some files on the internal storage and might be the cause but I did that maybe 3-4 days after this happened.)
Thanks!
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Hi Friends...
I have a Micromax D303 android 4.4 mobile. There is a problem with it. It gets soft bricked automatically after some time. I have to reinstall the firmware to make it work again.
Here is its behavior:-
First of all, its launcher stops working (launcher 3). ERR:- "Unfortunately, the launcher has stopped working." Using Titanium backup, I saw that launcher freezes. Defrosting it didn't work. It remains froze. Slowly slowly, it happens to all the apps. And at last, a time comes when it becomes useless. It will reboot automatically and will be stuck on the logo. Then I flash the ROM and make it work. I only use its stock ROM.
What I have tried:-
1. I installed stock ROM but it stops working again after some time.
2. During the firmware installation, I have tried "format + download" option.
3. I usually root my mobile, but I have tried keeping it without root. Still, the problem happens.
4. I thought, there may be some Trojan Horse in my memory card. But, I have tried formatting it, changing it and even kept my mobile without it. But the problem persists.
This problem starts happening when I once tried to flash it with a custom ROM. I bricked my mobile. Then I repaired it by flashing stock ROM. After that, this problem starts happening. Sometimes, it happens after two months, sometimes, even after two days.
Can anyone have any guess about this? Any solution? Anyone?
By the way, this is my first thread. I am new here. Hoping to get nice first experience.
Thanks in advance!
Trojan horse in the memory card seriously [emoji24][emoji24][emoji24][emoji24]
([emoji813]9/[emoji725]/9[emoji813])
PoochyX said:
Trojan horse in the memory card seriously [emoji24][emoji24][emoji24][emoji24]
([emoji813]9/[emoji725]/9[emoji813])
Click to expand...
Click to collapse
Well, I read in a thread here on XDA developers...
And I am looking for a solution bro...
{NO OFFENCE}