Related
Virgin Mobile Canada.
I'm trying to flash a compatible firmware so I can use Temp CWM or even root to flash CWM.
It's near impossible to root this thing on it's default firmware and no firmwares will flash other than the original. I get a SEC AUTH ERROR. I've tried everything. 32/64 windows. I've done the steps. SUT LR. Tried nearly every version of SuperOneClick. Tried psneuter, gingerbreak, zergrush. Nothing works. And yes, USB dev is enabled.
Anybody know if the Virgin Mobile Motoluxe is different than the others?
Does anybody else have this phone?
bump
Have u booted in bootloader while flashing rom, is ur bootloader unlocked?
Are u trying to flash while mobile is on .saying usb dev. Is enabled.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Have u booted in bootloader while flashing rom, is ur bootloader unlocked?
Are u trying to flash while mobile is on .saying usb dev. Is enabled.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
I flash firmware at the red screen
robertmdebodt said:
I flash firmware at the red screen
Click to expand...
Click to collapse
Which i assume is the bootloader screen? How can you tell if a bootloader is unlocked?
I'm guessing it's locked if I can't flash another firmware.
robertmdebodt said:
Which i assume is the bootloader screen? How can you tell if a bootloader is unlocked?
I'm guessing it's locked if I can't flash another firmware.
Click to expand...
Click to collapse
OK u flash at red screen
if ur device is getting detected in pc then try android download tool ADT.
Moonguy75 said:
OK u flash at red screen
if ur device is getting detected in pc then try android download tool ADT.
Click to expand...
Click to collapse
What exactly am I doing with ADT?
I can't use adb to boot into fastboot.
I've tried "adb reboot-bootloader" and it just restarts the phone normally.
Also tried "fastboot boot recovery.img" manually. But nothing.
Anybody have any other suggestions?
Sent from my XT615 using xda app-developers app
ADT android download tool its a flashtool to flash yaffs images.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Rsdlite is the tool to flash firmwares on motorola devices
Sent from my XT615 using xda app-developers app
Yes but u can also use Adt to flash if works for every device.
Can adt flash sbf files?
Sent from my XT615 using xda app-developers app
I'm not really sure that ADT tool really applies to rooting the XT615.
Bump
Sent from my XT615 using xda app-developers app
Hi Guys !!!
I'm happy to have found you ... because I have EXACTLY the same problem !
I own a phone from Virgin Mobile... a motoluxe XT615.
I have unlocked it lately ... it work very well on other provider.
I wish to use the phone on Petro-Canada network, which have unlimited data for browsing at 8$ per month.
However, actually, if you go over 2 Gb, they might shut down your account...
Unfortunately, to be able to use proxy (autoproxy) to make all my apps on the phone working with the Petro-Canada data proxy, I need to root the phone !
Here is what I've tried :
I have tried the SuperOneClick without success... I have tried manual rooting ( using adb shell on terminal ) .. I have tried with Windows 7 and I have tried on Ubuntu ... both failed. I have tried to flash the phone firmware with version IRM-152A-0-4034-A01_BFM ... thus resulted to an unusable phone ! ... the application actually crashed (May try it again!) ...
I have tried to flash it with firmware version IRM-1670-0-4073-A02_BFM_service provided by a website that stated that this firmware is already rooted (in order to install Jelly Beam) ... but ... it resulted in having a non-bootable phone at all...
So I had to flash it back with firmware IRM-174F-0-1022-A01_BFM ... and then I got a blue screen ... (after 4 min waiting) . Then I rebooted and was able to use the phone as before ( well, I had to put back all my settings )...
So far, I've tried the gingerbreak (installed on the phone as an APK) ... I have tried psneuter ... and I have tried superoneclick ... and tried some firmware. I can't get this phone rooted at all !!!
HELP!
If anyone know of a firmware that may work on this phone, I'd be happy to try it ! If the firmware provided is already rooted, then good !
I'll be monitoring this thread to see your own progress...
Thanks !
ve9mdb said:
Hi Guys !!!
I'm happy to have found you ... because I have EXACTLY the same problem !
I own a phone from Virgin Mobile... a motoluxe XT615.
I have unlocked it lately ... it work very well on other provider.
I wish to use the phone on Petro-Canada network, which have unlimited data for browsing at 8$ per month.
However, actually, if you go over 2 Gb, they might shut down your account...
Unfortunately, to be able to use proxy (autoproxy) to make all my apps on the phone working with the Petro-Canada data proxy, I need to root the phone !
Here is what I've tried :
I have tried the SuperOneClick without success... I have tried manual rooting ( using adb shell on terminal ) .. I have tried with Windows 7 and I have tried on Ubuntu ... both failed. I have tried to flash the phone firmware with version IRM-152A-0-4034-A01_BFM ... thus resulted to an unusable phone ! ... the application actually crashed (May try it again!) ...
I have tried to flash it with firmware version IRM-1670-0-4073-A02_BFM_service provided by a website that stated that this firmware is already rooted (in order to install Jelly Beam) ... but ... it resulted in having a non-bootable phone at all...
So I had to flash it back with firmware IRM-174F-0-1022-A01_BFM ... and then I got a blue screen ... (after 4 min waiting) . Then I rebooted and was able to use the phone as before ( well, I had to put back all my settings )...
So far, I've tried the gingerbreak (installed on the phone as an APK) ... I have tried psneuter ... and I have tried superoneclick ... and tried some firmware. I can't get this phone rooted at all !!!
HELP!
If anyone know of a firmware that may work on this phone, I'd be happy to try it ! If the firmware provided is already rooted, then good !
I'll be monitoring this thread to see your own progress...
Thanks !
Click to expand...
Click to collapse
Ive tried everything you have and im stuck as well. Hope someone has a solution.
Sent from my XT615 using xda app-developers app
robertmdebodt said:
Ive tried everything you have and im stuck as well. Hope someone has a solution.
Sent from my XT615 using xda app-developers app
Click to expand...
Click to collapse
Hi! hey, have one of you tried installing a Custom Rom, like Enox Rom over that firmware? by example, enox rom has multilanguage and it is pre-rooted, why dont you try it? and tell us what happened ....
Hm doesnt seem to work either. Sec auth error.
Sent from my XT615 using xda app-developers app
Well sec auth for firmware. Cant exactly root or enter tempcwm...so how do i flash a rom?
Sent from my XT615 using xda app-developers app
Hi guy I want to update my xperia u to Ics via flashtools but am afraid that it cause my phone to bootloop (sony logo)i have this brick before I was really scare it took me 4 hour to fix it (it start install firmware normally but at the half of the install it said device connect to this computer....etc then my phone stuck at Sony logo after that I try to flash stock firmware both Ics And Gb countless of time than I succeed by flashing Gb t-mobile firmware) but now I want to flash back to Ics reason:
1.no xda premium
2.no nova launcher and another awesome mod apps
3.easy root no need to unlock bootloader
Is the problem cause by
Anti virus program
Or by window fire wall(off)
Or by pc companion(don't have in my computer)
Or by install flashtools in D not C
Or by samsung kies(my bro program but now I uninstall it)
Or by by anything else?
Please respond
Sent from my ST25i using xda app-developers app
You can root even easier than on ICS.
Sent from my Xperia U using xda app-developers app
XperianPro said:
You can root even easier than on ICS.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Thx but I don't want to unlock bootloader even a bit
Sent from my ST25i using xda app-developers app
dara007_168 said:
Hi guy I want to update my xperia u to Ics via flashtools but am afraid that it cause my phone to bootloop (sony logo)i have this brick before I was really scare it took me 4 hour to fix it (it start install firmware normally but at the half of the install it said device connect to this computer....etc then my phone stuck at Sony logo after that I try to flash stock firmware both Ics And Gb countless of time than I succeed by flashing Gb t-mobile firmware) but now I want to flash back to Ics reason:
1.no xda premium
2.no nova launcher and another awesome mod apps
3.easy root no need to unlock bootloader
Is the problem cause by
Anti virus program
Or by window fire wall(off)
Or by pc companion(don't have in my computer)
Or by install flashtools in D not C
Or by samsung kies(my bro program but now I uninstall it)
Or by by anything else?
Please respond
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I think you can simply check if this problem happens in another computer.
Then tell the result here.
I haven't encountered with this type of problem.
:what:
Sent from my Xperia P using Tapatalk 2
Don't think anyone can help a lot because it doesn't seem a normal issue.
What I would say for sure is that the firewall is not the problem because it is off and even if it were on that should not affect the communication between a computer and a phone via USB cable as that is not an IP communication.
PC Companion is not needed to flash a ROM with flashtools.
You don't install flashtools anywhere. The only thing you install for flashtool are the drivers and those are installed in the place where Windows needs to install them. But the application is not installed anywhere it can be run from any place as far as I know. It should work just perfectly from a pendrive, external drive, from drive C, D, or Z, ..., or whatever other storage device. Besides if the process starts you can imply flashtool is working properly.
So the only things I could bet are:
* you have a faulty ROM file. But probably this is not the case as I suppose if you have a faulty ROM flashtools will warn about it somewhere when it reads the ROM.
* you are not using the correct ROM for your phone model (ST25i or ST25a).
* you have a faulty USB cable or USB connector that lost connection on the middle of the process.
* you had not enough battery on the phone when you started the flash proccess so the phone lost power on the middle of the process.
(if flashtools finish the flash process correctly with the message that ask you to unplug and restart phone then 3 and 4 can be discarded)
What I would do is check which phone you own ST25i or ST25a and download the stock 6.1.1.B.1.100 ROM for your model from a reliable source and if possible from somewhere that offers an MD5 checksum to be sure you get the file without errors. Download again the last version of flashtools. Be sure when you flash to have enough battery on the phone (not sure what is the recommendation but more than 60% should be safe). When you flash rest the phone somewhere where nor the phone nor the cable move the least to avoid any lost of connection on the middle of the transfer.
Or you can just install PC Companion and update to the official ROM but probably that would be 6.1.1.B.1.54 ROM that doesn't work very good on my experience.
paulsm said:
Don't think anyone can help a lot because it doesn't seem a normal issue.
What I would say for sure is that the firewall is not the problem because it is off and even if it were on that should not affect the communication between a computer and a phone via USB cable as that is not an IP communication.
PC Companion is not needed to flash a ROM with flashtools.
You don't install flashtools anywhere. The only thing you install for flashtool are the drivers and those are installed in the place where Windows needs to install them. But the application is not installed anywhere it can be run from any place as far as I know. It should work just perfectly from a pendrive, external drive, from drive C, D, or Z, ..., or whatever other storage device. Besides if the process starts you can imply flashtool is working properly.
So the only things I could bet are:
* you have a faulty ROM file. But probably this is not the case as I suppose if you have a faulty ROM flashtools will warn about it somewhere when it reads the ROM.
* you are not using the correct ROM for your phone model (ST25i or ST25a).
* you have a faulty USB cable or USB connector that lost connection on the middle of the process.
* you had not enough battery on the phone when you started the flash proccess so the phone lost power on the middle of the process.
(if flashtools finish the flash process correctly with the message that ask you to unplug and restart phone then 3 and 4 can be discarded)
What I would do is check which phone you own ST25i or ST25a and download the stock 6.1.1.B.1.100 ROM for your model from a reliable source and if possible from somewhere that offers an MD5 checksum to be sure you get the file without errors. Download again the last version of flashtools. Be sure when you flash to have enough battery on the phone (not sure what is the recommendation but more than 60% should be safe). When you flash rest the phone somewhere where nor the phone nor the cable move the least to avoid any lost of connection on the middle of the transfer.
Or you can just install PC Companion and update to the official ROM but probably that would be 6.1.1.B.1.54 ROM that doesn't work very good on my experience.
Click to expand...
Click to collapse
Thx for the reply dude but I think it is my pc problems not my phone or firmware
Sent from my ST25i using xda app-developers app
dara007_168 said:
Thx but I don't want to unlock bootloader even a bit
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I did not mean bootloader unlock,there is master key exploit root tool aviable 1.6-4.1.2
XperianPro said:
I did not mean bootloader unlock,there is master key exploit root tool aviable 1.6-4.1.2
Click to expand...
Click to collapse
Really bro i've never knew that we can root xperia u gb without unlock bootloader no one ever tell me about it
Do you have the link bro?
Sent from my ST25i using xda app-developers app
dara007_168 said:
Really bro i've never knew that we can root xperia u gb without unlock bootloader no one ever tell me about it
Do you have the link bro?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
You can find everything here
http://www.saurik.com/id/17
XperianPro said:
You can find everything here
http://www.saurik.com/id/17
Click to expand...
Click to collapse
I'm a bit confused I don't understand a thing.can u post a tutorial bro please
Sent from my ST25i using xda app-developers app
dara007_168 said:
I'm a bit confused I don't understand a thing.can u post a tutorial bro please
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Find "Obtaining Root" section
XperianPro said:
Find "Obtaining Root" section
Click to expand...
Click to collapse
Ok I find it but still don't understand u can say that I'm a noop but please tell me the tutorial
Sent from my ST25i using xda app-developers app
Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
dosada said:
Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
Click to expand...
Click to collapse
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
dosada said:
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
Click to expand...
Click to collapse
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
dosada said:
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
Click to expand...
Click to collapse
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
welder73 said:
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
dosada said:
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
Click to expand...
Click to collapse
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
welder73 said:
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I am in Australia and that seems to be the only one missing there
dosada said:
I am in Australia and that seems to be the only one missing there
Click to expand...
Click to collapse
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
welder73 said:
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hvala brate, sledeci put kad sam u BG castim pice.
dosada said:
Hvala brate, sledeci put kad sam u BG castim pice.
Click to expand...
Click to collapse
Nema na čemu!
Haha,ja gledam nik "dosada",rekoh neko naš a ti napisao Australija,pomislim,onda nije
Sorry for oftopic language
Sent from my XT910 using xda app-developers app
after paying 25 for a subscription for a site and waiting 48 hours finally was able to download the files hope these files help all the people with mt2-l03 variant of the phone these are full update.apps extract the file a dload folder will be available copy the dload folder to the root of your external sd card go to update select local update.. phone will reboot into recovery and auto load the update (fyi the one ending in 128 is for the wind mobile canada variant)
https://drive.google.com/folderview?id=0B7lyht1oiGRRNEl4dlJhdVhnQ00&usp=sharing
Hey thnx
Enviado desde mi MT2-L03 HAM2 ... i'm lovin' it
Hey no problem figured I would try my luck with the paid site since their was no firmware any where for the us/Canada variant hope it helps u
Sent from my Nexus 4 using XDA Free mobile app
Wind Mobile rom variant
Anyone have any ideas on what might have changed for Wind Mobile's variant of the rom?
honestly the wind variant is the worst version on my mate 2 the cam inverted the bootloader relocked and i cant root it was the last firmware i tested and now cant flash any of the other ones there no shortcuts in the notificaiton bar either i flashed all the us ones back and forth no problem but as soon as i flashed the wind one my phone is stuck on it
jayandcourt2 said:
honestly the wind variant is the worst version on my mate 2 the cam inverted the bootloader relocked and i cant root it was the last firmware i tested and now cant flash any of the other ones there no shortcuts in the notificaiton bar either i flashed all the us ones back and forth no problem but as soon as i flashed the wind one my phone is stuck on it
Click to expand...
Click to collapse
that sucks ...
how did you flash ???
cant you re unlock bootloader ??
i flashed through local update on the phone and no i tried the original code it wont work and when i request the code now huawei says they cant provide the code for my device variant
jayandcourt2 said:
i flashed through local update on the phone and no i tried the original code it wont work and when i request the code now huawei says they cant provide the code for my device variant
Click to expand...
Click to collapse
i was looking into extracting the update APP
into parts
check this http://forum.xda-developers.com/showthread.php?t=2315547
and flash boot.img from latest.
*-*-*-*-*-
edit
crap i forgot you got relocked...
if you go into fastboot it says you are locked?
gierso said:
i was looking into extracting the update APP
into parts
check this http://forum.xda-developers.com/showthread.php?t=2315547
Click to expand...
Click to collapse
i tried that and then when i go to fastboot it blocks me cause the locked bootloader
jayandcourt2 said:
i tried that and then when i go to fastboot it blocks me cause the locked bootloader
Click to expand...
Click to collapse
i have all the img files and havent been able to do anything cause the wind firmware totally blocked me out
jayandcourt2 said:
i have all the img files and havent been able to do anything cause the wind firmware totally blocked me out
Click to expand...
Click to collapse
so your only option is to beg huawei for the code to reunlock your phone...
or sell this one (if it is still working) and buy a new one
or find another root method.. and when rooted try to unlock bootloader with root..
Yup it says I'm locked
Sent from my Nexus 4 using XDA Free mobile app
I have tried 27 times lol they say they can't release the Code for us devices
Sent from my Nexus 4 using XDA Free mobile app
try towelroot. maybe it got stronger
it somehow was not able to root my nexus 7 and an update was able (with locked bootloader)
Towelroot says its successful but when I install supersu it says theres no su binary installed
Sent from my Nexus 4 using XDA Free mobile app
so i have literally had no luck normally if towel root says it was successful and the phone doesnt reboot it means it worked but i can no matter what get it to work
Sent from my Nexus 4 using XDA Free mobile app[/QUOTE]
jayandcourt2 said:
after paying 25 for a subscription for a site and waiting 48 hours finally was able to download the files hope these files help all the people with mt2-l03 variant of the phone these are full update.apps extract the file a dload folder will be available copy the dload folder to the root of your external sd card go to update select local update.. phone will reboot into recovery and auto load the update (fyi the one ending in 128 is for the wind mobile canada variant)
https://drive.google.com/folderview?id=0B7lyht1oiGRRNEl4dlJhdVhnQ00&usp=sharing
Click to expand...
Click to collapse
I can't get them to install. I have the consumer wireless. unlocked bootloader and unlocked carrier and rooted. I reinstalled the stock recovery and it brings up an error about vendor.app. I think that file is nessecary to install this rom. thats my guess unless I am doing something wrong.
That's very strange I had no problem installing them the vendor.app is an image that is included in the update.app file try Google Huawei update extractor and extract the update app u will have a bunch of img files use fast boot and install them one by one and your extracting them so it shows a dload folder right then putting the dload folder on your external memory not internal right
I bought my phone from Wind a few days ago, and apparently this phone sold out at Wind.
I was able to get my code from huawei, root this phone using TowelRoot, install BusyBox, then superSu from playstore.
wind
j42lin said:
I bought my phone from Wind a few days ago, and apparently this phone sold out at Wind.
I was able to get my code from huawei, root this phone using TowelRoot, install BusyBox, then superSu from playstore.
Click to expand...
Click to collapse
whogave u the code
today using the LG Flash tool I was trying to restore the factory Image and during this time I use to End Up with the Error Code 2. I followed a Guide wich told me to to selecet Downgrade BL and Proeed, I was successfully able to boot into windows, But Ever since then It show No Sim Car Where as I've my Simcard in it and when My Device gets connected to Wifi it shows Hands Free Activation, I am worried thinking If the phone is Locked, and its keeps circling Handsfree Activation and Later Fails. Please guide assistane on how to fix this.
aukhan said:
today using the LG Flash tool I was trying to restore the factory Image and during this time I use to End Up with the Error Code 2. I followed a Guide wich told me to to selecet Downgrade BL and Proeed, I was successfully able to boot into windows, But Ever since then It show No Sim Car Where as I've my Simcard in it and when My Device gets connected to Wifi it shows Hands Free Activation, I am worried thinking If the phone is Locked, and its keeps circling Handsfree Activation and Later Fails. Please guide assistane on how to fix this.
Click to expand...
Click to collapse
I may be wrong but you're probably going to have to restore your previous EFS. A couple months ago, after using the flash tool, that happened to me but luckily I found a way to do it, but I completely forgot how.
Sent from my LG-ls990 using XDA Free mobile app
succumbtothegreater said:
I may be wrong but you're probably going to have to restore your previous EFS. A couple months ago, after using the flash tool, that happened to me but luckily I found a way to do it, but I completely forgot how.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
Hi Guys,
I was able to successfully restore to stock without any issue, I had to do a restore using a different method, I was getting an Factory Reset Status 2.
I had to Downgrade BL and i could restore and I had to replace 2 files from another thread. and I was able to successfully get my Device working, I was even able to swith to GSM network. Thanks to all the Xda members who are so knoweledgeable.:laugh:
Any chance you could provide more details about exactly what you did, and a link to that other thread? It could help someone else.
aukhan said:
Hi Guys,
I was able to successfully restore to stock without any issue, I had to do a restore using a different method, I was getting an Factory Reset Status 2.
I had to Downgrade BL and i could restore and I had to replace 2 files from another thread. and I was able to successfully get my Device working, I was even able to swith to GSM network. Thanks to all the Xda members who are so knoweledgeable.:laugh:
Click to expand...
Click to collapse
Could you explain from what thread. I am trying to downgrade my G3 to be able to root it.
meyerweb said:
Any chance you could provide more details about exactly what you did, and a link to that other thread? It could help someone else.
Click to expand...
Click to collapse
gelito81 said:
Could you explain from what thread. I am trying to downgrade my G3 to be able to root it.
Click to expand...
Click to collapse
Ill be posting links soon