I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Not sure if these will work but found them when I was looking for my MSL.
Use this method. I don't know who found it, but credit goes to them.
Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a about 10 minutes (more time will not hurt), and soft-reset.
* Check to see that the file \Atlog\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:
~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~
The numbers next to the Rx: +HTC_RMSL line should be your MSL
OR
Do a search for BAFMSL. It's a universal SPC code finder tool.
It requires .net 3.5, and tends to fail randomly, but so far has worked on 8 of 10 phones I have tried it on.
BTC
http://www.rimweb.in/forums/index.php?showtopic=17301
=] Awesome. This is just what I needed. Thanks.
HTC MSL
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Last edited by MysticThunder; Today at 01:38 AM.. Reason: new title.​
Should be as simple as 000000. Same as Verizon...I just did mine, hope it works....KC
On my Titan all I did after upgrading the rom was create a new connection, called it broadband, entered #777 as the number, and my phone number followed by @vzw3g (password blank, check save password) and it worked fine.
MysticThunder said:
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Click to expand...
Click to collapse
there are a few settings in you need to make sure are corect in the m ip settings of the phone after u press ##778. I am using uscc and had the same issue. so I know this to be a factor after updating roms. Below are the correct settings for your m ip
Number of Profiles : 6
Active User Profile Index : 0
MIP_MODE : Mobile IP Prefered
MIP Registration Retries : 1
MIP Registration Retry Timeout : 2000 ms
MIP Pre-Registration Timeout : 3
Mobile Node-HA Authentication : Enable
Send a Registration Request Only in Use : Enable
Dormant Hanfoff Optimization: Enable
I cant stress enough... these need to be exact with uscc... dont forget to run the uscc carier cab.
If you want to have EVDO when it comes to your areas as well, under Security Settings, make sure the HDR username is your [email protected], and the ESN is in hex and all capital letters. The HDR Password is your ESN the same as above but no @uscc.net on the end.
Below this screen is also the ppp username and password, they should be your phone#@uscc.net and your phone # as the password.
These 2 settings are also necessary for data to work correctly.
BTC
Will someone PLEASE explain to me how i get Vodaphone GPRS to work on WM6.5?
When i insert the Sim it detects it as a BPL sim and it fails to automatically get the settings,i've tried connection manager AND IT JUST CRASHES upon launch
If i have to input the settings manully will someone please direct me in a gprs-for-dummies kinda way?
Solution
Hi bro here's the setting
Frist goto
Setting than connection and tap on connection
Then u will find advanced option below tab it
Then select new
Give name as vodafone
Then tap on modem and create new
Name it vodafone then select cellular line (gprs) than next
Then give access point name as
portalnmms
Then next and finish leave user name and password blank
Now select proxy setting below
Check on both the box
Give proxy server as
10.10.1.100
Now select advanced
Than select http
Edit server as above and port as
9401
Also configure for wap;secure wap and socks as the above way
Then tab ok and you are done
I have been attempting to access the following MMS Settings on the Samsung illusion...
MMSC Domain
UAProf
MMS User Agent
So far i have not been able to access these, I have tried the following
MMS Provisioning menu on the handset - Requires a lock code which is normally model + mms (110667) is not working. Also tried spc, 000000, and the proclaim model number.
VPST - I believe that the NV portion of VPST will allow me to access this, but i have been unable to connect my device properly. I have been able to connect to ETS, but when i use the VPST the VIA hub software will never link the session to the device that it has detected.
Does anyone have any experience with modifying these setting that might know something I could be missing?
I want to open menu 'Testing'. I tried code *#*#6130#*#* and *#*#4636#*#* (*#*#INFO#*#*) in the dialer but they not work on my phone. I mean the window in which can choose 'Only LTE' mode. This window looks like image from attachment.
jamesbond22 said:
I want to open menu 'Testing'. I tried code *#*#6130#*#* and *#*#4636#*#* (*#*#INFO#*#*) in the dialer but they not work on my phone. I mean the window in which can choose 'Only LTE' mode. This window looks like image from attachment.
Click to expand...
Click to collapse
Hello
+1
Same question, i search but nothing works ! any idea ? :crying:
These all secret codes works on my phone:
Code:
About phone *#*#0000#*#*
Project menu *#*#2846579#*#*
Calendar info *#*#225#*#*
Google Play service *#*#426#*#*
IMEI *#06#
Only not work code for opening Menu Testing. Is it not installed or locked...?
Also I tried combination *#*#8378#*#* (TEST) and *#*#8378464#*#* (TESTING) and nothing happpens. I tried many codes founded in internet and many apps from Market and still I can't open Engineer Mode. I think that Engineer Mode is not installed on phone Honor 8X Max. :/
same problem with Honor 8c model BKK-AL10
im trying to add bt one phone apn but if i edit the MNC if fails to save , is there a way to edit my apn i made in text editor or another way ?
thanks