Story was a bit messy, so i rewrited it.
Here's the deal.
I'm using headset and bluetooth car audio very often. I'm quite sure that when i bought the phone, i was able to wake the phone up during the call, using the power button, without the call being disconnected.
Now here's the problem, when i make a call, and want to check anythingo on the screen, i have to wake the device up, that needs power button to be pressed, and that immidiately disconnects the call. Any of you guys have a clue what could go wrong or maybe i need to see some settings to fix it?
I thought it only happens on bluetooth but yesterday i found out it happens also when using headset.
thx in advance
Hmm, if you are during a phone call, your phone should be awake?
I just know that you can reject a call by pressing the power button, that's an android feature.
No, it shouldn't be awake.
I'm not talking about rejecting a call either.
I've already solved the problem. It was an option in accessibility options, called "end of connection".
tapatalked
Related
I did search, but didn't find anything...
I'd like to disable the messaging button and PIE button on my phone when I've got an active call. Whenever I'm on a call, and hold the phone to my ear, I end up pressing one or both buttons. It gets really tiring having to constantly close the messaging app, or PIE every time I get off the phone.
So, is there a way to disable those buttons with a call active?
Thanks
over2land said:
I did search, but didn't find anything...
I'd like to disable the messaging button and PIE button on my phone when I've got an active call. Whenever I'm on a call, and hold the phone to my ear, I end up pressing one or both buttons. It gets really tiring having to constantly close the messaging app, or PIE every time I get off the phone.
So, is there a way to disable those buttons with a call active?
Thanks
Click to expand...
Click to collapse
havent seen an app around that can do that...
Do I just have abnormally big ears?
It drives me nuts, anyone else have this problem?
No, you're not the only one!
over2land said:
Do I just have abnormally big ears?
It drives me nuts, anyone else have this problem?
Click to expand...
Click to collapse
Happens to me too - but usually it only happens when I jam the phone between my head and shoulder (hands-free mode )....don't think it's related to ear size....
Probably the only solution is to stick a BT headset in your ear and always answer the phone with that.....or press 'OK' a couple of times when you end the call!
Not much help, but at least now you know you're not alone
Mark.
True...
And, I think it might only happen when I have the phone between my ear and shoulder too... which ends up being like all the time.
Problem with the bluetooth thing, is two fold
1) I've not found one that is loud enough
2) I don't like wearing it all the time, so put it down... when the phone rings, and I pickup the bluetooth, and try to answer with it, the phone has stopped ringing by the time the phone and earpiece are paired...
over2land said:
Problem with the bluetooth thing, is two fold
1) I've not found one that is loud enough
2) I don't like wearing it all the time, so put it down... when the phone rings, and I pickup the bluetooth, and try to answer with it, the phone has stopped ringing by the time the phone and earpiece are paired...
Click to expand...
Click to collapse
...ain't that just the way
One thing I've just thought of, though I've not tried it yet....
If your phone is "locked" (from the today screen plugin) and a call comes in, you get the popup to show who's calling etc. - do the messaging and PIE buttons still operate in those circumstances? If not, you might just have found yourself a solution
Mark.
<locks phone>
Dunno, but not a bad thought.
I'll give that a shot, thanks
Hey guys,
I have a couple of things that bother me about this phone. I didn't have these problems when I first got it so I'm trying to figure out why this happens.
First off, when I get a phone call, sometimes I can't answer it. I will be pressing the Answer button both on the screen and the actual hardware key... it will never go to the connected call button even though it shows I'm in call.
Next is the issue I have with the End Button. Sometimes I accidently press it and it terminates my data connection. Is there anyway to make the End key serve as just a hang-up/go back to the home screen type key? I would love to see this issue fixed.
Thanks for your time.
*UPDATE* : I just realized that when I'm in a data connection, it sometimes won't let me answer or I will have to press Answer 30 times for it to get into a call. It seems like a very slow transition from Data to Voice. Any ideas?
You can set the end key to do other things in the settings menu someplace. Look for it. Have it give you a list, instead of doing an automatic feature.
I just did a hard reset and it fixed everything.
When i got this device i thought how stupid this was and hoped after flashing a custom rom maybe it would eliminate this stupid feature of this device. It seems HTC thinks it's a good idea to turn the screen ON after ending a phone call, WTF?
At work i use my bluetooth headset all day with my phone in my pocket. I will take my phone out, dial the number i want to speak to, press power to turn screen off, put device in pocket and have my conversation. I end the phone conversation with my bluetooth headset and guess what? The dang phone's screen turns on while it is in my pocket. I guess the light sensor has zero effect here! So now since this happens and my device has a timeout of 2min i set before screen turns off my phone accidentally "butt dials" people and without me knowing i'm now calling people randomly while i'm working!
Another case. I have my phone in my car's cupholder, i use bluetooth to make a call with my car, it initiates the call to my phone and again it turns the screen ON to make the call. WHY? I never pressed power on my device to turn the screen on to make a call. So again i press the power button to turn screen off while in call. I hang up the call when i'm done via the bluetooth in my car and again the device turns the screen back ON once i disconnect the call via bluetooth.
I just don't understand the logic behind this? Is this some HTC thing or all android? Coming from iPhone 4 never had this issue so was a first for me with this device. Just don't see the reason or logic for this?
Anyway to prevent this or stop this from happening? I mean isn't that the point of bluetooth to not need to touch your device thus no need for the screen to be turned on????
+1
It seems that this is not a HTC thing because I have the same behavior on my Samsung device. Same problem as well with pocket dialing during/after a call. Really annoying. I had the same thing on my old HTC Nexus One running Froyo, so this is not a new bug. Back then I tried a lot of different apps, and none helped. I even flashed CyanogenMod on it and it didn't change anything.
I really hope someone has run across a fix whether it's an app, a patch or a whole new ROM, because pulling my phone out of my pocket to turn the screen back off TWICE for every call I make or receive is getting to be a pain.
I can't believe this behavior is voluntary on the part of the designers. If it is, please someone explain why.
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
ethanon said:
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
Click to expand...
Click to collapse
Just downloaded but no idea how to use this thing. Not very saavy with this type of stuff. How can I use tasker to turn the screen off when ending a call ONLY while connected to a Bluetooth headset? This is my biggie since it's in my pocket.
Got it to work
Ok, I downloaded Tasker and I'm impressed.
Here's how I got this to work:
1: Create new profile using STATE, then go to NET, then hit BLUETOOTH CONNECTED. Here you can specify if you want only a specific device or any Bluetooth.
2: Set new task: SET plsLock to ON
3: Set exit task: SET plsLock to OFF
4: Create new profile using EVENT, then go to PHONE, and hit PHONE OFFHOOK.
5: Set new task as: SCREEN, SYSTEM LOCK
6: Hit IF, and specify if plsLock is ON
7: Create new profile using EVENT, then go to PHONE, and hit PHONE IDLE.
8: Set new task as: SCREEN, SYSTEM LOCK
9: Hit IF, and specify if plsLock is ON.
You're done.
Since I had the same problem with the wired headset, I also created a profile with HARDWARE, HEADSET that sets the variable plsLock to ON and exit task sets it back to OFF. You can name the variable anything you want and it will still work.
If anyone has a better/simpler way of programming this, please share. I just started using this program and am still trying to wrap my head around the way this is structured.
As this stands, it works... But it's still a patch on something that should be an option in Android.
Let me know what you think.
Ok thank you I'll give it a try. Yeah could never understand why my device thinks it's a good idea to turn screen back on after ending a call via Bluetooth or not? I receive call, I then press power button to turn screen off bit continue my call, the caller hangs up, boom my screen turns on displaying the phone dialer until my time out settings turn screen off. Dumbest feature I swear. Hello phone I pressed power offbutton to turn screen off, get the hint and keep screen off until I press power button and want it back on again. No sense...
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
ethanon said:
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
Click to expand...
Click to collapse
No unfortunately not. I would greatly appreciate that! I would think it's a simple task but honestly I'm very handicapped when it's comes to stuff like this.
Basically a string for tasker that would simply just do this:
When my device is connected to a Bluetooth device whether it be my car kit, headset, stereo headset, etc. and a phone call ends where by me pressing the End Call on screen button, by ending call with car kit, headset, etc, doesn't matter but will make the screen turn off. That's it.
When connected via Bluetooth, a phone call ends, screen turns off.
Now here's a kicker and not sure if this part would be harder. I'm connected via Bluetooth headset or device, I have screen on to manually make a phone call, then while on the call I press the power button to turn screen off while on call and put device in my pocket. Now when the call eventually ends I would want the screen to stay off.
I will read into the link you provided and mess with it somewhere. Thank you for your time and help.
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
ethanon said:
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
Click to expand...
Click to collapse
Correct BUT only when connected to a Bluetooth device. My gripe is on a Bluetooth call, place a call manually then talk on headset, car kit, etc. I press power button to turn screen off then put phone back in pocket, when call ends the phone turns screen back on for some reason. Never understood this?
Wondering if this happens to anyone else. Sometimes when there is an incoming phone call the screen remains turned off and there is no way to see who's calling or to answer the call. The power button does nothing. Basically, all you can do is wait for the call to go to voice mail, then wait another 30-40 seconds after which the phone finally responds to the power button and turns on. This drives me crazy. What good is the damn phone if you can't answer important phone calls? Interestingly, this was my biggest complain about the stupid iPhone 6, where a lot of times I would be getting a call and the screen would be frozen. Are the phones only for web browsing and facebooking now? Making and receiving phone calls is a secondary feature and no one complains if it doesn't work?
Second issue. Every phone I've had going back many years has had a proximity sensor, where during a call the screen goes dark once you hold the phone to your ear and wakes up once you move it. The V10 does NOT do that. The screen never wakes up by itself, I always have to hit the power button. Is this a "feature" or a bug?
My phone is not playing
Dial tone
And do not hear what I'm talking about during a conversation
And I do not hear anything either
In a conversation through whatsapp the sounds work
And in all other applications
My phone is note ||
rom
lineage-14.1-20171019-tilak-n7100.zip
The phone worked without a problem before that but suddenly in the middle of a conversation it was turned on again and since then nothing has been heard in the conversations
In addition, I checked another SIM on my phone, and with it the same thing happened
In addition, I checked another SIM on my phone, and with it the same thing happened
sh770 said:
In addition, I checked another SIM on my phone, and with it the same thing happened
Click to expand...
Click to collapse
Have you tried these steps:
Disable the audio tone
Re-enable it
Soft reset
I have seen this fix your issue on many other devices
- Deployments
How I do it and what it
What is the soft reset
sh770 said:
What is the soft reset
Click to expand...
Click to collapse
Press and hold the Power and Volume down buttons for 12 seconds.
Use the Volume down button to scroll to the Power Down option.
Press the Home key to select.
Note The device powers down completely. It is recommended that the device be powered up in Safe Mode.
- Deployments
I pressed for 12 seconds and the machine was turned on again I had no choice I have custom speakers and still it does not work I tried to run in safe mode and it did not help
Resolved
I flash ROM
The phone is now working