Hi all, i really hope someone can help me, i got my htc sensation broken and a friend left me his Samsung Double until I can e new phone. }
Here is the problem: I downloaded the firmware for this from a mirro, cause the sammobile's link is broken. I tried to flash the firmware with Odin 1.85 and when hit Start after some seconds the phones turn off and start ti charge. I wanna know how can i fix this, this phone has wifi error and the microphone is not working, without that is not a decent phone, PLEASE!!!
migui0401 said:
Hi all, i really hope someone can help me, i got my htc sensation broken and a friend left me his Samsung Double until I can e new phone. }
Here is the problem: I downloaded the firmware for this from a mirro, cause the sammobile's link is broken. I tried to flash the firmware with Odin 1.85 and when hit Start after some seconds the phones turn off and start ti charge. I wanna know how can i fix this, this phone has wifi error and the microphone is not working, without that is not a decent phone, PLEASE!!!
Click to expand...
Click to collapse
Are you sure you're in Download mode and the firmware you selected is beside PDA/AP in Odin?
Sent from my GT-I8730 using Tapatalk
aureljared said:
Are you sure you're in Download mode and the firmware you selected is beside PDA/AP in Odin?
Sent from my GT-I8730 using Tapatalk
Click to expand...
Click to collapse
Yes, i am. But the get out of the download mode when odin is step "SetupConnection!
Related
I think I bricked my Android, I installed messed with ROM manager, then I shut down my phone, tried to reboot it and it didn't boot, also I cant see download mode or rescovery, though Odin detects my phone and I plug the USB to the phone. I think the only solution is go to the service... please help me..
eulfen said:
I think I bricked my Android, I installed messed with ROM manager, then I shut down my phone, tried to reboot it and it didn't boot, also I cant see download mode or rescovery, though Odin detects my phone and I plug the USB to the phone. I think the only solution is go to the service... please help me..
Click to expand...
Click to collapse
If Odin can detect your phone then you should be able to flash your phone with it regardless what the screen looks like.
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
eulfen said:
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
Click to expand...
Click to collapse
Well you said Odin detects your phone still right? You should be able to find Odin flashable firmware for your phone and flash as usual.
Sent from my SAMSUNG-SGH-I897 using XDA App
If Odin detects your phone then there might be a chance to flash a new rom to your device.
Go to samfirmware.com and find an rom/firmware for your phone... Then download it and flash it using one package techinque in odin. If you need more help post your phone model, it might help for better reply ...
yagya said:
If Odin detects your phone then there might be a chance to flash a new rom to your device.
Go to samfirmware.com and find an rom/firmware for your phone... Then download it and flash it using one package techinque in odin. If you need more help post your phone model, it might help for better reply ...
Click to expand...
Click to collapse
He did mention his phone model. Hasn't posted in 2 days so I'm hoping he fixed it.
eulfen said:
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
Click to expand...
Click to collapse
remove battery , hold 3buttons and replace it!
u will see downloadin...
I opened Odin, loaded 1.0 GIO
then put the package of firmware, pressed start and it said.. downloding and then error popped up something with timer
I have 5660 GIO GT
Plz plz plz help
Not sure if it'll make much difference, but you could try Heimdall.
Sent from my SAMSUNG-SGH-I897 using XDA App
eulfen said:
I opened Odin, loaded 1.0 GIO
then put the package of firmware, pressed start and it said.. downloding and then error popped up something with timer
I have 5660 GIO GT
Plz plz plz help
Click to expand...
Click to collapse
Go to this link and get yourself a good rom/kenel that is for your region's device. Then try to flash it using one package option in ODIN in download mode.
You can also find a guide on flashing your rom @ samfirmware.com/guides.htm
Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Flash a full (different to whatever you were trying) ROM, problem solved.
Sent from my GT-I9100 using XDA App
yep, that's just a soft brick.
since you can access DL mode, just reflash with odin and normally problem solved
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
andrewvbv said:
Hello,
I've got the same problem but it seems I can't go into download mode. What am I doing wrong? What else can I try?
My SGS2 is not rooted and was on Android 2.3.3. Kies told me there was an update available to android 2.3.4 so I went for it.
But I'm really disappointed, now my phone is completety stuck on this screen with the phone...orange triangle with exclamation mark (warning)...PC.
EDIT : Samsung Kies proposes to do an emergency recovery, but in the end it also fails.
Fortunately, I took a screenshot before upgrading. See attachment.
Please help me.
kind regards,
Andrew
Click to expand...
Click to collapse
If your phone is not rooted, you still have your warranty, bring it back to the shop and ask for a new one
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
andrewvbv said:
I bought it an amazon. But I'd prefer to have a solution right now instead of having to complain.
I continued my quest on the net... Apparently, a usb jig might take me out of this screen and back to the download mode. Can somebody confirm this?
Click to expand...
Click to collapse
One minus Did you follow the Kies recovery instructions .
One turn off and remove battery for a short period .
Two turn on
Three try recovery mode
Four try download mode ..
Five yes USB jig may enable you to get to download mode and from that you can flash a stock Samsung rom .
Six service centre
jje
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
A USB Jig should be standard equipment for anybody who flashes their Galaxy phone, IMO.
andrewvbv said:
Thanks JJEgan. I'll try once more and let you know. Assuming that I am able to get in download mode, why should I use a stock kernel and not the normal firmware I had before? Sorry about my question, but this is all new for me.
Click to expand...
Click to collapse
Download Odin, download stock ROM, use Windows Task Manager to kill any Kies-related processes. Then turn off the phone, turn it back on in download mode and flash using Odin. Do not tick repartition and do not use the PIT file if the stock ROM comes with one.
Hi,
Thanks to this forum I managed to bring my SGS2 alive again step by step after that Kies broke it during the android upgrade from 2.3.3 to 2.3.4... Moreover, I am in the official 2.3.4 version now without using Kies!! ;-) Here's my story:
In the end, I was able leave the screen with the "phone..orange warning triangle..computer". and I was able to go in download mode without a usb jig. You have to press the 3 keys (volume down, home, and power on) quite a few seconds without releasing them. And then the download warning menu appears, press volume up to confirm that you want go go in download mode. And I was in "download mode'. Anyway, I will buy a jig ;-)
I tried once more the emergency recovery with samsung Kies without success. Failed.
Then with Odin I had problem. It was stuck at step "setup connection". Kies was not running and was not visible in the system tray. Though in the task manager, I still had 2 Kies* processes. Kiestrayagent.exe and another one starting with Kies and 4 letters (sorry I didn't write it down). I killed both processes. One step further... Then Odin was stuck on step complete(write) operation failed. Never found why. I tried several times, battery in and out again, without success. This was on a Win7 32bit. Latest Kies version.
In the end I installed Odin on another PC Win7 64bits. I had to install Kies also on it otherwise Win7 says "no driver found" when you plug in the usb cable of the SGS2. And on this computer, flashing with Odin worked perfectly.
Thanks again to all people who helped me + also thanks to this super forum where I could find the official firmware I needed after that Kies broke down my phone.
Andrew
hi
Spl1tz said:
Haaa, thx all i fixed it! ^^
It took me 5 hours to find out what i had to do and find the stock Firmware tho...
But all fine now
Click to expand...
Click to collapse
but tell me how you got it fixed
help i have the same problem
Spl1tz said:
Help!! My SGS2 is stuck on a screen with an orange triangle and excmamation mark between a cellphone and computer after a ROM flash attempt!
I can go to Downloading mode and Odin can detect my smartphone but i don't know what else to do...
Click to expand...
Click to collapse
i have the same problem how can i silve it
skhoudary said:
i have the same problem how can i silve it
Click to expand...
Click to collapse
Simple solution:
Read the posts above!
"To err is human, to forgive is divine"
Sent from my SGS II
I really need some help here if anyone could take some tile to do so...
I just got the samsung galaxy s2 and I tried to flash the firmware on the phone and I believe I flashed the wrong one and now I have no services on my phone at all. I flashed a rom and have no connect 3g/4g/wifi. I am not able to connect the phone to odhin to reflash the firmware either. I can get into download (Odhin mode) and I can also get into recovery. Anyone have any thoughts on this?
i dont get it, you say you cant connect your phone to odin, but you can get into downlaod mode.
put your phone in download mode, then connect your phone to PC and then reflash the correct firmware for your phone with ODIN
Angellife said:
I really need some help here if anyone could take some tile to do so...
I just got the samsung galaxy s2 and I tried to flash the firmware on the phone and I believe I flashed the wrong one and now I have no services on my phone at all. I flashed a rom and have no connect 3g/4g/wifi. I am not able to connect the phone to odhin to reflash the firmware either. I can get into download (Odhin mode) and I can also get into recovery. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Ok, your phone is not bricked.
If you have no data/wifi your phone maybe missed baseband
Type this on dialer: *#1234#
Look at is write PHONE. What do u see?
What's your phone model? Look under the battery place
marcelotorres said:
Ok, your phone is not bricked.
If you have no data/wifi your phone maybe missed baseband
Type this on dialer: *#1234#
Look at is write PHONE. What do u see?
What's your phone model? Look under the battery place
Click to expand...
Click to collapse
It won't allow me to do that nothing happens when I punch in the #1234#
Phone model is SPH-D710
mrvtec69 said:
i dont get it, you say you cant connect your phone to odin, but you can get into downlaod mode.
put your phone in download mode, then connect your phone to PC and then reflash the correct firmware for your phone with ODIN
Click to expand...
Click to collapse
It doesn't connect at all when I am in download (odin mode) like it won't show me with the yellow connection in odin tells me that I have a custom binary and that I have downloaded 1 binary. The only time I can connect with odin is when the phone is in the booted up but I can not do anything with it at all no connection. Also Clockwork is all messed up as well whenever I click on a task it goes blank and I just hit the power button again and it goes back to the main screen =-(
I have been reading up online and I guess what I need is a US version of sprints firmware but now I need to figure out how to install it once I get my hands on it
I found the firmware!!
D710USEG30 is the firmware for Sprint USA galaxy s2 I am going to attempt to use Heimdall Frontend to install it (crossing my fingers) hehe
Ok update, I guess I installed something on my laptop to keep me from being able to use odin. I did it on my desktop just fine and I am back up and running. I thank both of you for your time it was very helpful and much appreciated =-)
I hope you both have a very Merry Christmas =-D
Angellife said:
D710USEG30 is the firmware for Sprint USA galaxy s2 I am going to attempt to use Heimdall Frontend to install it (crossing my fingers) hehe
Ok update, I guess I installed something on my laptop to keep me from being able to use odin. I did it on my desktop just fine and I am back up and running. I thank both of you for your time it was very helpful and much appreciated =-)
I hope you both have a very Merry Christmas =-D
Click to expand...
Click to collapse
Happy that you fixed your phone.
Next time, take care.
Happy x-mas for you too.
Angellife said:
It won't allow me to do that nothing happens when I punch in the #1234#
Phone model is SPH-D710
Click to expand...
Click to collapse
phone model is SPH-D710 are you sure you got the correct model number? if i am not wrong, SPH-D710 is for SAMSUNG GALAXY S II EPIC 4G TOUCH. correct me if i am wrong.
And backup your EFS (IMEI), use the search for EFS, and for backuo you can use the HK-Tool its on the market.. its very important to backup it.
Hi everyone.
i own a international samsung s3 gt-i9300T
i noticed it behaving strangly as apps where locking up and then it would restart in the middle of web surfing etc
last night i restarted it and now it has frozen in ODIN MODE and states DOWNLOADING-DO NOT TURN OFF TARGET...
Its been on this page for hrs..
i have a custom Hyperlight rom installed.
Any suggestions would be greatly appreciated.
thankyou.
john
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
it's already in download. read the instructions on installing a stock rom
Oomahey said:
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi
srry fr the late reply but it freezes on the samsung galaxy s 3 gt i9300t screenafter it reboots
im totally lost im about to dump the phone in the garbage and get another one tomorro
ive also tried using odin again but it just stalls for hrs when trying to reinstal flash another rom
thnx heaps for ur advise
Glebun said:
it's already in download. read the instructions on installing a stock rom
Click to expand...
Click to collapse
thnks buddy but when i hold the power button it does what i explained in the above reply when i hold power vol down and home the warning screen comes up informing me that a custom rom can cause critical problems etc so when i press down to cancel it goes back to the previously mentioned screen but when i press up to install rom it goes into odin mode with the android robot with
product name blank (previosly it stated gt i9300t)
custom binary download no (previously stated4)
current binary samsung official (said something different before)
system settings custom
i swear this is doing my head in :0
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
JJEgan said:
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
Click to expand...
Click to collapse
hi im using the latest odin file odin3 v1.85 and is this the right firmware file to use as i used this to root my s3 CF Root-SGS3-v6.4.tar
when i do it it says
<ID:0/005> "cant open the serial (com) port.
<OSM> All threads completed (succeeded 0/ failed 1)
if the product name is empty in download, then it's time to get a new phone. it's SDS
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
thanks matey
so in other words my phone is bricked :0
by the way what does sds stand for ???
anyway thnx again
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
hi again
i tried it again and now it says there is no pit partition ???
who wants a samsung s3 brick b4 it goes into the trash ???
antway thnx buddy this rooting is not fr me :0
Put it on ebay just say what the problem is .
Someone who reads your post will come to the conclusion its just a user who has not followed the instructions annd may think its worth a cheap buy .
Odin is not firmware CF Root is not firmware .
jje
Make sure that uve downloaded the correct CF-Root file (for i9300T and NOT i9300)... I think its nothing to do with SDS... Anyway try the following link and download the package again...
http://www.androidegis.com/how-to/how-to-root-galaxy-s3-i9300t-with-cf-root-tool/
Hope it works....
Sent from my GT-I9300 (Hassan Khalid Malik) using xda premium
Hi!
My friend has said that when plugged your own S3 on charger, it became stuck on samsung logo!
This S3 don't enter on recovery, don't charge or show Samsung's logo.
The only thing that works is enter on download mode.
See attachment of a photo taken from "recovery mode"...
Anybody can help me?
Sorry for english...
Sent from my GT-I9505 using XDA Free mobile app
Flash stock firmware from sammobile.com or samsungupdates.com
Via Odin after reading some guides in stickies and check if any hardware is faulty if not then you can reroot and flash a new recovery.
Press thanx if i helped you in anyway...
Filipeknot said:
Hi!
My friend has said that when plugged your own S3 on charger, it became stuck on samsung logo!
This S3 don't enter on recovery, don't charge or show Samsung's logo.
The only thing that works is enter on download mode.
See attachment of a photo taken from "recovery mode"...
Anybody can help me?
Sorry for english...
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
I think you will find returning to stock with odin won't work it looks like a hardware problem (need new motherboard) try returning to stock as suggest but I am pretty certain this is a service center repair...:fingers-crossed:
When i flash the last 4.3, odin show me a message of fail after 2 seconds.
When i add the pit file, odin stuck in "GET pit for mapping"...
I'm thinking that is a hardware fault...
Thx for help
Sent from my GT-I9505 using XDA Free mobile app