Hello! I wonder if there is any way to change your GPU speed on your Galaxy S3?
I just changed kernel to boeffla, to be able to clock my CPU. But if I flash to another kernel, will my CPU clock diminish?
Currently using Resurrection Remix 5.1.1 KK 4.4.2 ROM with Boeffla Kernel v2.3-beta3..
I've noticed alot of people having their signatures saying they have 1.6GHZ CPU and 700MHZ GPU.. My question is how?
Edit: Nevermind, while lying in bed and just before putting away my phone I saw a picture of something called Boeffla-Configurator..Problem solved!
Just for clarification, you should use Boeffla config v2 not just Boeffla config on playstore
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
Yeah I used the H2.
Sent from my GT-I9300 using Tapatalk
To open this thread again; My phone crashed a while ago, and I forgot about The kernel. Now when I try to reflash it (downloading the zip, opening width bfk2 and flashing, my phone is zeroed at boot). What am I doing wrong?
Related
So, I've upgraded my Siyah Kernel to the latest version and set the CPU UNDERVOLTING to -100mV(default is -No Undervolting), governor to lulzactiveq, max frequency to 1.6(default is 1.4) and voltage control to 1325000 uV (default is 1350000)
Is this safe ? No crashes so far.
Yes there is no problem..,..
Read siyah kernels information its very helpful to you.....
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
rockondudu said:
Yes there is no problem..,...
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Click to expand...
Click to collapse
I just had a freezae and needed to remove the battery to reboot it again. Advice of going one step lower to 1.5 ? or increase a few voltage @ 1.6?
is 1400000 good for 1.6?
rockondudu said:
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
Click to expand...
Click to collapse
Thanks for the screenshot
P.S : I think the problem is my rom, because its freezing, except for 1.5(stable). Rom is OMEGA 33.3
Well i rebooted my s3 , 1.6 oc and voltage control to default and uv @ -100mV. Its stable. Stay with this?
Hello! This is my first thread, ever, on any forum so please don't bash me if I forget something .
I've decide to make a kernel for the SGP 5.0 for Gingerbread because I loved Entropy512's, but I was slightly jelous of the INTL users and all their new givernors and I/O schedulers. Soooo i used Entropy512's sources and borrowed rumirand's schedulers and governors and tossed in a 1.4 GHz OC and a few cherry picks from KOala888 and voila!
Current features:
O3 optimization
battery pooling - 60sec (KOala888)
touchscreen responsivness tweaked (KOala888)
Screen UV (KOala888)
2.6.35.7 source for GingerBread.
Unsecure mode.
Swap support.
Overclock to 1.4Ghz and undervolt capabilities (use SetCPU or another software for UV).
Added lazy (default), interactive, interactiveX, smartassv2, ondemandX governors.
Added BFQ, V(R) and SIO (default) schedulers.
Init.d support.
Added statically linked busybox 1.19.3 (/sbin)*.
Modified adbd (pointing shell to /sbin/sh), so you can use adbd even if you don't have any partition working.
ext4 support (ghetto lagfix).
ClockWorkMod. Nandroid backup - restore works, mount/umount, format (formats to ext4).
CIFS support.
jhash3.
SoD patch from netarchy/coolbho3k.
TinyRCU.
netarchy's conservative tuning patch.
Custom bootanimation support (/system/media/bootanimation.zip) from Entropy512's kernel.
Per-File fsync() disable
Charginghacks from Entropy512.
I may release a 1.2 GHz version if the community finds 1.4 too unstable.
If there is anything i forgot please tell me!
Download USA
Download INTL
Almost forgot my sources: https://github.com/augiem94/linux_kernel_galaxyplayer
Feature requests are welcome!
Credits:
Entropy512-his sources and his handy build script! Saved me a TON of hassle
rumirand-for his sources
KOala888-for his tweaks
koxudaxi-for his OC settings
I've got Entropy's kernel on my player, and I keep having random freezes. For instance, I'll be typing or scrolling and thing go completely unresponsive for a second or two. I'm not sure if it's a governor thing or what (I've turned off overclocking to see if that helped, but it doesn't seem to have made any difference).
Do I just have a bad install of Entropy's, or is this something everyone has? Would flashing this kernel likely to fix those issues? Can I flash without re-installing my ROM (Gingerbread Based)? Are there any issues I should know about before applying this kernel?
Dr. Cyanide said:
I've got Entropy's kernel on my player, and I keep having random freezes. For instance, I'll be typing or scrolling and thing go completely unresponsive for a second or two. I'm not sure if it's a governor thing or what (I've turned off overclocking to see if that helped, but it doesn't seem to have made any difference).
Do I just have a bad install of Entropy's, or is this something everyone has? Would flashing this kernel likely to fix those issues? Can I flash without re-installing my ROM (Gingerbread Based)? Are there any issues I should know about before applying this kernel?
Click to expand...
Click to collapse
I had the same problem, i could never diagnose the source, but so far i havent had it once with the 1.4GHz OC. if you do get that problem tell me and ill look into it further .
EDIT: Problem still exists, if anyone has an idea what it is please tell me. I believe Mevordel had a theory a while back it was due to facebook being a rogue app and causing it. Feedback on this theory will be greatly appreciated!
EDIT2: Facebook does not appear to be the culprit.
augiem94 said:
I had the same problem, i could never diagnose the source, but so far i havent had it once with the 1.4GHz OC. if you do get that problem tell me and ill look into it further .
Click to expand...
Click to collapse
Well, I've flashed it now. Here's to hoping it's smooth sailing from here on out
I ran this kernel almost all day yesterday. Visually, things in the UI don't look much faster (probably because of the lack of GB hardware acceleration, and Project Butter), but a few 3D games run noticeably better. Those random pauses that occur, especially when typing on a keyboard, have seemed to also disappear. Thanks for making Gingerbread a bit better to use for those of us that can't let it go completely just yet!
I likewise ran all day, and didn't see any issues. I'm optimistic they're gone now. I never install Facebook, to further disprove that theory.
General question lol is it possible to compile gingerbread kernels with a Linaro toolchain?
Sent From My USA Galaxy Player 5.0
augiem94 said:
General question lol is it possible to compile gingerbread kernels with a Linaro toolchain?
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
Of course But you may get compile errors when building with Linaro, in which case you will need to solve them. There are also a few other things to worry about with Linaro, else you may solve the errors and get the kernel to compile and it won't boot.
Thank you! I am a going to load this right now. Thanks for including smartassV2 in governors. The main reason I used INTL r14 over Entropy.
Edit: 8:50 pm.
Cannot load over clock module from Tegrak. When I try to load the module and change the OC to 1.152 (which I find most stable on my player) the player will reboot. 1.2 and 1.4 seem to be the only option for OC. Been running at 1.2 for now with no issues. 1.4 seemed to run too hot.
YP-G70 USA
R.E.D.D ROM
Rumirand r14 INTL Kernel on YP-G70 USA device
I Like Turtles.
1.152 OC
:fingers-crossed:
HOG1csmith said:
Thank you! I am a going to load this right now. Thanks for including smartassV2 in governors. The main reason I used INTL r14 over Entropy.
Edit: 8:50 pm.
Cannot load over clock module from Tegrak. When I try to load the module and change the OC to 1.152 (which I find most stable on my player) the player will reboot. 1.2 and 1.4 seem to be the only option for OC. Been running at 1.2 for now with no issues. 1.4 seemed to run too hot.
YP-G70 USA
R.E.D.D ROM
Rumirand r14 INTL Kernel on YP-G70 USA device
I Like Turtles.
1.152 OC
Click to expand...
Click to collapse
Same problem here with Tegrak, I'll try to get it sorted out in the next release.
EDIT: I got the module to load i think, but the device reboots directly after. It reboots after the Load Module button greys though so I'm fairly sure its loading
EDIT2: It loads if i set the max frequency to 1.2GHz from No Frills, but if i change it back to 1.4 after its loaded it reboots. Getting there .
it can't get "too" hot from technical side
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
augiem94 said:
:fingers-crossed:
Same problem here with Tegrak, I'll try to get it sorted out in the next release.
Click to expand...
Click to collapse
You probably can't load the tegrak module because the vermagic is different
android1234567 said:
You probably can't load the tegrak module because the vermagic is different
Click to expand...
Click to collapse
Im really new to the dev scene, mind explaining?
Sent From My USA Galaxy Player 5.0
augiem94 said:
Im really new to the dev scene, mind explaining?
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
The tegrak module and the kernel have version names in them and the module will only load when the version inside said module matches the version of the kernel. Basically, they need to have the same name. There's some nice info on this here: http://www.tldp.org/LDP/lkmpg/2.6/html/x380.html
android1234567 said:
The tegrak module and the kernel have version names in them and the module will only load when the version inside said module matches the version of the kernel. Basically, they need to have the same name. There's some nice info on this here: http://www.tldp.org/LDP/lkmpg/2.6/html/x380.html
Click to expand...
Click to collapse
Forgive me if im being numb, but i havent changed the version in the makefile at all.
Sent From My USA Galaxy Player 5.0
After using it for a few days now,it seems that scrolling still sometimes locks up. I haven't noticed any issues with typing yet, but that could be not using it at the right time.
Sent from my YP-G70 using xda app-developers app
I've been using this on 1.2 GHz for over a week and it is great.
No persistent issues.
Thanks for the kernel!
I appreciate your work.
YP-G70 USA
R.E.D.D ROM
AC Kernel
augiem94 said:
Forgive me if im being numb, but i havent changed the version in the makefile at all.
Sent From My USA Galaxy Player 5.0
Click to expand...
Click to collapse
It's not the version of the version but the localversion (normally it is 2.6.35.7-XXXXX) The X represents the local version. You can modify the module to actually make it work with the kernel or in your case modify the localversion specified in the defconfig.
Thank you so much for this Kernel!!!! I am loving the 1.4 Ghz. Smooth sailing so far. Once again thanks!
The problem is while gaming with a mamereloaded after 5 minutes the CPU automatically throttles down to 800 MHz and the game lag a lot, Even if the phone is not that heated up.The problem is only with a Samsung rom. I tried Googy-Max Kernel 1.6.1 with a dual rom, CM10.1 no problem. Samsung rom have a problem. Same Samsung rom (omega 43.7) but with old Siyah Kernel 1.84 and no problem cpu stay at 1400mhz.
Sorry for my very bad english.
that's odd, does same thing happens to Sammy stock kernel ?
it is only due to Googy Max kernel , then you should probably post your problme in the kernel thread and the DEVer should help you
qtwrk said:
that's odd, does same thing happens to Sammy stock kernel ?
it is only due to Googy Max kernel , then you should probably post your problme in the kernel thread and the DEVer should help you
Click to expand...
Click to collapse
Unfortunately is my first post and I can not post in Googy max kernel dev. I follow the post Googy kernel for a long time and every day I see the news, I see that you post a lot on the Googy kernel dev, can you do me a favor to post in the Googy dev this problem. I really like the Googy kernel for me is the best but this problem bothers me a lot.I did all the tests (using Perfmon 1.10 for cpu monitor in real time) it does so with all the stock kernel also. only one who has no problem is the Siyah Kernel 1.84.And up to version 1.5.0 Googy max kernel down to 1000 mhz but now goes down to 800 MHz. Googy_anas I wanted to ask if he could put an option in stweaks that controls the throttle cpu type (throttlemode: Smasung default or cm10 mode)
i have post your request and hope your problem could be solved ASAP.
by the way , just a little thinking.
did you set Touch Boost ? because default TB value is 800 Mhz which is coincidently coincided your 800 Mhz, well , that's highly unlikely.
and do you have any CPU apps that overrided the Stweak CPU setting that without yourself knowing it ? because i have been under similar situation once but with firewall locked up my apps not the CPU frequency of your case.
did you try use clear sammy rom ? better the stock ROM without any Addon
just flash clean ROM , the kernel or try stock kernel first.
install only 2 things ! the monitor and any heavy application like Game or something
skassa22 said:
The problem is while gaming with a mamereloaded after 5 minutes the CPU automatically throttles down to 800 MHz and the game lag a lot, Even if the phone is not that heated up.The problem is only with a Samsung rom. I tried Googy-Max Kernel 1.6.1 with a dual rom, CM10.1 no problem. Samsung rom have a problem. Same Samsung rom (omega 43.7) but with old Siyah Kernel 1.84 and no problem cpu stay at 1400mhz.
Sorry for my very bad english.
Click to expand...
Click to collapse
What a strange problem.
I know for sure that most custom sammy roms have some tweaks included which might interfere with some of the features of Googy-Max Kernel. That's why I personally use and recommend stock rom for ~0 problems experience.
So, instead of changing kernels to test, please try with a stock sammy rom along with your preferred kernel.
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
googy_anas said:
What a strange problem.
I know for sure that most custom sammy roms have some tweaks included which might interfere with some of the features of Googy-Max Kernel. That's why I personally use and recommend stock rom for ~0 problems experience.
So, instead of changing kernels to test, please try with a stock sammy rom along with your preferred kernel.
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
Click to expand...
Click to collapse
Hello master googy thanks for your kernel. Try with your rom and monitor the cpu with apk PERFMON play some games and you see the cpu go down at 800mhz after a few minutes. Is not the rom is something in the kernel. with syah 1.84 and same rom no problem. with your kernel 1.0 since 1.50 and same rom the cpu going down to 1000mhz.I thing is something in the kernel routine (Samsung side) that have cpu throttle too sensitive. you can do something that controls the clock with temperature and set it in stweaks?
This problem has been treated Thu time ago on post of Syah kernel:
http://forum.xda-developers.com/showthread.php?t=1709686&highlight=cpu+throttle&page=1041
skassa22 said:
Hello master googy thanks for your kernel. Try with your rom and monitor the cpu with apk PERFMON play some games and you see the cpu go down at 800mhz after a few minutes. Is not the rom is something in the kernel. with syah 1.84 and same rom no problem. with your kernel 1.0 since 1.50 and same rom the cpu going down to 1000mhz.I thing is something in the kernel routine (Samsung side) that have cpu throttle too sensitive. you can do something that controls the clock with temperature and set it in stweaks?
This problem has been treated Thu time ago on post of Syah kernel:
http://forum.xda-developers.com/showthread.php?t=1709686&highlight=cpu+throttle&page=1041
Click to expand...
Click to collapse
I just tried with some 3d games with mg4 stock rom and didn't have that problem...
Can you provide a log so that I can investigate more?
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
googy_anas said:
I just tried with some 3d games with mg4 stock rom and didn't have that problem...
Can you provide a log so that I can investigate more?
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
Click to expand...
Click to collapse
Test with a heavy cpu application ( antutu test only cpu more time 3 or 4 time) with overclock the problem appears more quickly) i have set my gpu 266, 350, 444, 533, 600. I can send you the logs by email?
Or by pm
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
googy_anas said:
Or by pm
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
Click to expand...
Click to collapse
Hello, i send android log and my max googy kernel settingI believe that is not a problem but a limitation of the kernel Samsung i9300 update sources.this was also the problem with icecream sendwitch a year ago but already with the first versions of siyah kernel worked better then up to 1.84 from 1.86 at the limit temperature drops to 1000 MHz. with your kernel was 1000 MHz up to 1.50 over this version and then dropped to 800 MHz.
http://netload.in/dateiHYSuy7AlYU/logandkernelsettings.zip.htm
skassa22 said:
Hello, i send android log and my max googy kernel settingI believe that is not a problem but a limitation of the kernel Samsung i9300 update sources.this was also the problem with icecream sendwitch a year ago but already with the first versions of siyah kernel worked better then up to 1.84 from 1.86 at the limit temperature drops to 1000 MHz. with your kernel was 1000 MHz up to 1.50 over this version and then dropped to 800 MHz.
http://netload.in/dateiHYSuy7AlYU/logandkernelsettings.zip.htm
Click to expand...
Click to collapse
I've sent you a test version, check your pm inbox
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4 Beta
Hi
I jumped from siyah 1.91 to googy 1.6.2 (because of 10.2 thanx Googy) and I'm experiencing exactly the same problem.
Cpu 1600 -7500 for all freqs less then 1100
GPU 700 -50
The rest of settings are stock.
ROM is Samsung stock 4.1.2
My frequency killer is Real racing 3.
Vvvz said:
Hi
I jumped from syah 1.91 to googy 1.6.2 (because of 10.2 thanx googy) and I'm experiencing exactly the same problem.
Cpu 1600 -7500 for all freqs less then 1100
GPU 700 -50
The rest of settings are stock.
My freq killer is Real race 3.
Click to expand...
Click to collapse
The only one who has no problems with the rom samsung is version 1.84 of the siyah kernel, the version 1.91 down to 1000 MHz and all the other new kernels down to 800 MHz. Now for the games and emulators i use the 1.84.Waiting for someone put tweak of cpu throttle in kernel utility.If you use cm10.1 and 1.60 is not affected. I have not tried 1.62 and cm10.2.
Hi guys,
Really thx to the Z for CM11 I've couple of questions.
1st-)
Do we have an GPU/CPU Overclock kernel like CM10.1, or How can I do it myself if possible? or anyone working on it? also can I use one from CM10.1? (but probably kernel is out dated)
I think it had 1200mhz on 1175mv and 400mhz on GPU if not 500 I think it was 400.
2nd-)
I think we do not have any CM12 besides Mokee (which stopped) and I've heard Z is working on it, is it right?
I really need an OC kernel or a Tutorial to edit and replace kernel, I'll use values from CM10.1 kernel or even old Faust kernels.
-Yami- said:
Hi guys,
Really thx to the Z for CM11 I've couple of questions.
1st-)
Do we have an GPU/CPU Overclock kernel like CM10.1, or How can I do it myself if possible? or anyone working on it? also can I use one from CM10.1? (but probably kernel is out dated)
I think it had 1200mhz on 1175mv and 400mhz on GPU if not 500 I think it was 400.
2nd-)
I think we do not have any CM12 besides Mokee (which stopped) and I've heard Z is working on it, is it right?
I really need an OC kernel or a Tutorial to edit and replace kernel, I'll use values from CM10.1 kernel or even old Faust kernels.
Click to expand...
Click to collapse
looks thank you for opening this topic also have this doubt about overclock A4G because it is already a little slow with freq stock , more would be sensational if there was any work of a cm12.1 or cm13 of daily use for our device
THX Sorry my bad english
Well, me, as well as other people, don't need full speed of our cores and we could gain some hours by underclocking both GPU and CPU, but, I don't know why, underclocking apps doesn't work.
@cile381 used to maintain an underclockable (by aroma installation) kernel, but only for CPU, and I'm wondering if someone could build (or direct us to a guide to how to build) a kernel, for example:
450MHZ max GPU
1440MHz BIG CPU
1248MHZ LITTLE CPU
I would like to build one but I have no idea where to find or modify these values (I could learn how to build a kernel but not how to underclock).
I think you can do that by apps like Kernel Auditor
Inviato dal mio LG-H815 utilizzando Tapatalk
this is the first time ive seen this all othe kernels are all stock with som optimizations and user could overclock as he pleases... its more convinient to have it that way..whoevers wants more performance overclock. but leave all setting stock..:good:
JulianMarku97 said:
I think you can do that by apps like Kernel Auditor
Inviato dal mio LG-H815 utilizzando Tapatalk
Click to expand...
Click to collapse
Try choosing a frec below the max in any kernel controlling app, then see the usage of the different freqs, it still gies up to the max, somehow the kernel ignores and overwrites whatwe choose withthe apps... dont know why or how
Yakandu said:
Try choosing a frec below the max in any kernel controlling app, then see the usage of the different freqs, it still gies up to the max, somehow the kernel ignores and overwrites whatwe choose withthe apps... dont know why or how
Click to expand...
Click to collapse
I think that issue actually has to do with certain thermal controls in the kernel. Might I ask which kernel/rom you're using? I actually have my kernel underclocked manually and don't have such an issue right now, and I've tried both llamasweet kernel with the Resurrection Remix and CM13 roms and Imperium kernel with Genesis and vanilla stock roms.
BG64 said:
I think that issue actually has to do with certain thermal controls in the kernel. Might I ask which kernel/rom you're using? I actually have my kernel underclocked manually and don't have such an issue right now, and I've tried both llamasweet kernel with the Resurrection Remix and CM13 roms and Imperium kernel with Genesis and vanilla stock roms.
Click to expand...
Click to collapse
stock 5.1 kernel :/
CM based roms have other sources, something is hardcoded in stock kernels... the kernel rewrites every modification you do on /sys so you cant change max freq ever
guys what are the stock settings of CPU and GPU.?