[Q] i8552 Galaxy Win Restore Problem - Android Q&A, Help & Troubleshooting

I've been trying to root my phone using Odin then my cable got disconnected. Now when I try to start up the phone it starts with CWM-based Recovery v6.0.4.5. I downloaded stock rom for my region and tried to install it from the SD card but it says "Installation Aborted". I tried formatting the SD card but didn't work.
I checked many pages but couldn't find a solution for my problem. I hope you can help me out of this situation.

Need to boot the phone to Download Mode and grab the original firmware from here:
http://live.samsung-updates.com/index.php?device=GT-I8552
and use Odin to load.

Related

NEED HELP - urgent!

Friends,
I am in a fix here.
I had installed ""Simplistic ICS >>A SuperLite ROM (RC5 Is here finally!)"" yesterday, and since it was hannging too much, i thought of installing another rom, but this is what i did wrong:
- I formatted system, data and sd card
since I thought I will mount usb storage and move/copy the new rom file in cwm
but now when i do that i get error: unable to open ums lunfile
when i do into download mode to flash via odin, odin doesnt recognise my device
and when i connect my usb in recovery mode, windows fails to regozne my device and gives error of usb malfunction
i have installed usb drivers(1.4) , kies etc.. and tried using adb, but adb gives an error too of not recognising the device
with no rom file in my sd card, im stuck. please help!
Thanks
Looks like you have wiped the phone its empty nothing on it .
I formatted system, data and sd card
Flash stock rom via ODIN .
No download = Service Centre no warranty as custom rom or try JTAG machine .
Old bootloaders then a USB jig may boot to download mode .
jje
Try different usb cable. Had the exact same problem.
Sent from my good old Galaxy S II. Hit thx if u think i helped and may the force be with u.
try the usb jig in the phone's download mode (Volume Down+Power button+Home button)
You can buy USb jig from ebay india.
Otherwise use ODIN. Make sure you have right ODIN.(download from samfirmware site).
Close kies from task bar and its process after updating it.
Then try connecting your mobile.
androidindian said:
Friends,
I am in a fix here.
I had installed ""Simplistic ICS >>A SuperLite ROM (RC5 Is here finally!)"" yesterday, and since it was hannging too much, i thought of installing another rom, but this is what i did wrong:
- I formatted system, data and sd card
since I thought I will mount usb storage and move/copy the new rom file in cwm
but now when i do that i get error: unable to open ums lunfile
when i do into download mode to flash via odin, odin doesnt recognise my device
and when i connect my usb in recovery mode, windows fails to regozne my device and gives error of usb malfunction
i have installed usb drivers(1.4) , kies etc.. and tried using adb, but adb gives an error too of not recognising the device
with no rom file in my sd card, im stuck. please help!
Thanks
Click to expand...
Click to collapse
Hey listen take the phone to the service centre and tell them that while using the phone suddenly it went blank and started behaving the way you described it!
They will fix it under warranty since indian samsumg service centre dont check the binary counter..!
They did that for me
KJS

Soft Bricked Tab with CWM 5.5.04

Hi all,
Need your advice on a semi-bricked tab.
I tried flashing CM10 on it with CWM 5.5.04 and it is stucked at the loading screen.
I am able to enter CWM now and also the download mode.
However, there isn't any firmware in the tablet and I have no idea on how to mount my external SD card using CWM.
I've tried ODIN but the PC is unable to detect the tablet in download mode.
Please advice...
(PS. it belongs to a pal. So kindly advice as I would love to return the tablet to him in working condition)
You prob already tried this but change the usb port try one round the back of pc . Also try installing odin with Samsung drivers etc .
Sent from my GT-I9300 using xda premium
Hi gordonx10i, sadly that didn't work.
Managed to resovle the issue by doing a couple of factory reset and worked well.
However, on both of my PC (XP and Win7), they now have a 'USB Device Not Recognized' message everytime I plug the tablet in.
Tried:
1. uninstall + reinstall Kies
2. uninstall and reinstall samsung driver
But to no avail. Unless I can resolve this, else odin will not work..

Odin detecting Galaxy S plus only in Ramdump Mode

Hello..
I have a Galaxy S plus (GT I9001), I installed TIGER-JELLY BEAN v8 recently, which was working fine. But phone was lagging a lot so I decided to install the stock rom again. I installed Kies(latest version) with drivers and connected my phone to my PC, but it was not detected by Odin. Every time I got Samsung Composite USB Device driver installation failed. So I searched and installed drivers from Here and Here. But they didn't worked either. I tried again after changing USB Cable but still no luck. Then I installed Kies in my Laptop and tried to connect the phone. Still it wasn't recognized.
Things were not working with downloading mode and Stock rom tar file cannot be flashed with recovery mode. So I searched a converter for .tar to flash able .zip file and found THIS . I installed this tool and tried to convert the tar file to zip. Didn't noticed that it require knowing "Mount Point", so I converted the tar file to zip without changing the mount point and copied the file to internal storage of phone and flashed the zip file. After that phone restarted , and stuck at Samsung Logo.
New I can't even to recovery Mode, nothing happens when I keep Pressing Vol Up + Power. Phone starts and stuck at samsung logo. Odin was already not detecting the phone so I tried connecting the phone on Ramdump Mode and some how drivers were installed and odin detected it correctly. But odin can't flash phone in ramdump mode so it didn't worked.
So now the problems I am facing are:
1- Phone is stuck at samsung logo, can't go in recovery mode.
2- Odin not detecting phone in downloading mode.
Is there something what I can do to fix this?
Please help!
Thank you.

Phone not recognised after cwm and stuck on boot screen

Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom as update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.

CWM stuck

HI,
I have an old Galaxy TAB P7500 and wanted to upgrade the Android version. I followed a guide and tried to install a custom ROM, but it failed. Now the tablet is stuck on the CWM screen and when I reboot it it goes back to the CWM screen. I can't connect to the computer via Odin or Kies since the computer does not recognize the tablet (drivers are installed) and I can't try any other ROM since the tablet does not have any external sd card, so it can read the data only from the internal memory, which I cannot reach.
I'm desperate. Any suggestion?
Thanks

Categories

Resources