HI,
I have an old Galaxy TAB P7500 and wanted to upgrade the Android version. I followed a guide and tried to install a custom ROM, but it failed. Now the tablet is stuck on the CWM screen and when I reboot it it goes back to the CWM screen. I can't connect to the computer via Odin or Kies since the computer does not recognize the tablet (drivers are installed) and I can't try any other ROM since the tablet does not have any external sd card, so it can read the data only from the internal memory, which I cannot reach.
I'm desperate. Any suggestion?
Thanks
Related
Hi all i recently installed the kg3 firmware and ever since doing so i cannot get any pc to recognise the device. i have tried in all ports and 3 pc's.
I have bought a new cable but same issue.
I tried doing a factory reset. and a reset through the manual mode.
I have reinstalled kies and uninstalled and put just the drivers on but same issue.
I think it's firmware as it happened as soon as i did the update ?
is there any way i can manually do a firmware update onto a ofial release stock if i can get it into the phones memory, I don't have a micro sd at this time?
Please help or any suggestions otherwise i may send back as faulty unit for warranty just incase the usb bit internally some how broke.
thanks in advance
Also for got to mention i tried it in usb dev mode and not
Also i tried now usb dev mode on to see of the development tools will pick it up and they also do not.
Anyway to recover the firmware on the phone with out access to usb ?
You can try flashing firmware with Odin. Read Chainfire thread in Original Development section.
Sent from GT-I9100
Do you have CWMrecovery?
If so boot into it, plug your phone in, select mounts, select mount usb storage.
If that works its firmware, if not its hardware.
If you have CWM recovery take your sd card out and copy a rom zip to it, boot into your rom, copy that rom into internal storage, reboot into CWM recovery, wipe data/cache and flash the rom from the apply zip from sd card menu item.
hi, I don't have cwmrecovery installed and it can be only installed via odin right?
In regards to ODIN i cannot get it to detect the handset to flash anything.
Hi all,
Need your advice on a semi-bricked tab.
I tried flashing CM10 on it with CWM 5.5.04 and it is stucked at the loading screen.
I am able to enter CWM now and also the download mode.
However, there isn't any firmware in the tablet and I have no idea on how to mount my external SD card using CWM.
I've tried ODIN but the PC is unable to detect the tablet in download mode.
Please advice...
(PS. it belongs to a pal. So kindly advice as I would love to return the tablet to him in working condition)
You prob already tried this but change the usb port try one round the back of pc . Also try installing odin with Samsung drivers etc .
Sent from my GT-I9300 using xda premium
Hi gordonx10i, sadly that didn't work.
Managed to resovle the issue by doing a couple of factory reset and worked well.
However, on both of my PC (XP and Win7), they now have a 'USB Device Not Recognized' message everytime I plug the tablet in.
Tried:
1. uninstall + reinstall Kies
2. uninstall and reinstall samsung driver
But to no avail. Unless I can resolve this, else odin will not work..
Ugh, totally my fault for not thinking this through.
Had downloaded the Paranoid Android ROM, a newer version from what I had, as I had installed it incorrectly.
So I thought, no worries, I'll just reinstall the ROM.
Booted into recovery mode, did a full wipe and then tried to install the new rom, only I couldn't find it anywhere...
Thinking I'll restart the phone and figure it out from there, but of course it doesn't go past the loading screen.
I can boot into download mode, but on my PC if I boot Odin, it doesn't recognize the phone and I get no yellow colour.
Pretty sure my internal SD card still has one or two custom roms on it, but without booting into recovery mode, I can't do much.
Odin doesn't recognize my phone. I installed the drivers from the samsung website, but it is not reading the phone in download mode.
Now I am unsure if there's another driver I need to install, i.e. a USB driver, seeing as this is a brand new pc, but other than that, I'm stuck.
Any ideas are greatly appreciated!
Download galaxy s3 toolkit from original android development section,install it and agree when asked to install drivers , reboot Pc and cross fingers for your Pc to detect your phone in download mode then just flash stock ROM
Sent from the grey stuff inside my skull
If you have a custom recovery (CWM or TWRP), you can use an OTG cable to connect a USB stick to your phone (which will be discovered by CWM, haven't tried TWRP) and install a new ROM with gapps from it...
Of course if you want to install stock, you have to stick with Odin.
Hope it helps
I've been trying to root my phone using Odin then my cable got disconnected. Now when I try to start up the phone it starts with CWM-based Recovery v6.0.4.5. I downloaded stock rom for my region and tried to install it from the SD card but it says "Installation Aborted". I tried formatting the SD card but didn't work.
I checked many pages but couldn't find a solution for my problem. I hope you can help me out of this situation.
Need to boot the phone to Download Mode and grab the original firmware from here:
http://live.samsung-updates.com/index.php?device=GT-I8552
and use Odin to load.
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom as update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.