I wanted to change the housing for my Galaxy S2 international, but it seems that if i were to remove the LCD from the Front Housing, the LCD screen would crack and hence i need to buy a new screen, which i dont need. Anyone has any idea on how to remove the screen without harming/damaging the screen??
Thanks:fingers-crossed:
Related
Hey, first time posting here, so let me thank you all in advance for just responding.
I've been looking all around for a description of where the actual digitizer is on the Samsung Galaxy S III. And so far I've found vague views of what it is and where it is. I've taken apart and repaired iPhones before and the digitizer is usually attached to the front panel glass but when I took apart a Galaxy S III, I couldn't find where the digitizer is. When I tried looking on shopping sites for a replacement of the front glass with the digitizer, all I've seen were the front glass with just the two touch buttons attached at the bottom and no signs of the actual digitizer that I'm familiar with in the iPhones.
So plain and simple, my question is where is the digitizer on the Samsung Galaxy S III?
nim01234 said:
Hey, first time posting here, so let me thank you all in advance for just responding.
I've been looking all around for a description of where the actual digitizer is on the Samsung Galaxy S III. And so far I've found vague views of what it is and where it is. I've taken apart and repaired iPhones before and the digitizer is usually attached to the front panel glass but when I took apart a Galaxy S III, I couldn't find where the digitizer is. When I tried looking on shopping sites for a replacement of the front glass with the digitizer, all I've seen were the front glass with just the two touch buttons attached at the bottom and no signs of the actual digitizer that I'm familiar with in the iPhones.
So plain and simple, my question is where is the digitizer on the Samsung Galaxy S III?
Click to expand...
Click to collapse
hi,
I posted a similar matter about screen replacement (only glass and in the links there is posts to replace touch too)
Read it:
Replacement screen?
http://forum.xda-developers.com/showthread.php?t=2314403
My post is #5
In ebay or amazon you find, glass only about 20 boxes and the set i9300 LCD Screen + Touch Digitizer about 190~200 boxes
use this search words i9300 LCD Screen Touch Digitizer
there is in youtube too.
best regards,
I want to change the front glass from S II (digitizer I guess) but I can't find any guide online, I only get full screen replacement guides, so I searched for S III and it have s couple of guides, I have some experience taking apart phones (I changed the front glass too for my old Droid Bionic and iPhone 3gs) but i am a bit scared about put some heat on the screen and i dont know what glue it needs, so somebody knows how to do all this crap?
From my Galaxy S II i9100 CM10.1
Zero_Lord said:
I want to change the front glass from S II (digitizer I guess) but I can't find any guide online, I only get full screen replacement guides, so I searched for S III and it have s couple of guides, I have some experience taking apart phones (I changed the front glass too for my old Droid Bionic and iPhone 3gs) but i am a bit scared about put some heat on the screen and i dont know what glue it needs, so somebody knows how to do all this crap?
From my Galaxy S II i9100 CM10.1
Click to expand...
Click to collapse
Digitizer is heavily glued with the lcd itself, chances are very small that u will succeed to replace only the digitizer, wothout doing damage to the lcd.All those auctions on ebay are...nearly scams,because it's almost impossible to separate digitizer and lcd, don't fall for it. I have tried to do this on HTC HD2 and fail.
Sent from my GT-I9100 using xda app-developers app
Here are some pics: http://www.sammobile.com/2012/05/01/this-is-the-galaxy-siii/
Does anybody here know ANYTHING about this phone? I can get it for about 30$ from a friend. The problem is it's screen is shattered and I can't replace it because official s3 parts wont fit in this ugly housing. I was thinking about replacing it's whole body for the official one and then replacing screen glass but I'm not sure if parts will fit. This prototype appeared on the internet about 3 weeks before official s3 premiere so I hope it's in fact a final hardware design. Every help/info is appreciated.
I dropped my phone and broke it pretty bad. i need to get the screen replaced but I seen a friend try to fix his phone and had some issues with the touch screen afterwords. I was looking at this +Frame Lcd Screen Touch Digitizer for Samsung Galaxy Mega 6.3 i527 i9200 i9205 and I saw one a different ebay page that the us i527 is different but that was only on that one posting am i safe to buy this and get mine fixed I don.t want to get the double sided sticky tape and paste the 2 together. I would like to get it allready put together. please help before I buy
cgrimm9 said:
I dropped my phone and broke it pretty bad. i need to get the screen replaced but I seen a friend try to fix his phone and had some issues with the touch screen afterwords. I was looking at this +Frame Lcd Screen Touch Digitizer for Samsung Galaxy Mega 6.3 i527 i9200 i9205 and I saw one a different ebay page that the us i527 is different but that was only on that one posting am i safe to buy this and get mine fixed I don.t want to get the double sided sticky tape and paste the 2 together. I would like to get it allready put together. please help before I buy
Click to expand...
Click to collapse
that lcd comes from china, so it may not be original Samsung.
I bought it from this seller. he charge me full price and he replaced it for me and changed the back as well.
I shipped the phone to him and he returned the phone to me free shipping ask him if he can do it for you or just sell you the LCD if you want to do it yourself
Hi there -
Hi there! So recently I dropped my s4 and the glass stayed intact but the lcd cracked and screen went black. I have a friend with an AT&T s4 (mine is verizon) and his screen is mint. Can I remove the lcd from his safely and transfer it to mine? I know when I removed mine I broke the lcd silver film, but mine was already cracked so no biggie. Will the AT&T lcd unit fit and can I safely remove it and put it on mine? Thanks so much!
87TB said:
Hi there -
Hi there! So recently I dropped my s4 and the glass stayed intact but the lcd cracked and screen went black. I have a friend with an AT&T s4 (mine is verizon) and his screen is mint. Can I remove the lcd from his safely and transfer it to mine? I know when I removed mine I broke the lcd silver film, but mine was already cracked so no biggie. Will the AT&T lcd unit fit and can I safely remove it and put it on mine? Thanks so much!
Click to expand...
Click to collapse
Is it also possible that I could remove the verizon motherboard and install it into the at&t body? Also to clear up some things, from the AT&T phone I need the glass+digitizer+LCD - full assembly. Would it be easier to transfer verizon parts to at&t body (will it even work?) or will it be easier to remove the whole display unit and pretend like I just bought the part online and need to install it.
Thanks guys!