I have an AT&T S3 I have clockworkmod 6.0.4.7. I am trying to install cm-11-20140210-SNAPSHOT-M3-d2att.zip but every time I do the install is aborted and I get a status 7 error. I tried installing TWP but though goo manager but my recovery mode is still in clockworkmod. Please help me figure out how to install this latest version of Kit Kat rom.
Try to flash TWRP using Odin or download a recovery flashing compatible file for TWRP and flash it using your current CWM. Or just try PhilZ
Do you have an i9300 or another model number? Try asking in that model's forum.
Sent from my GT-I9300 using Tapatalk
Saad_ said:
Try to flash TWRP using Odin or download a recovery flashing compatible file for TWRP and flash it using your current CWM. Or just try PhilZ
Click to expand...
Click to collapse
It worked thank you soooo much!! Lol but with all that done Im still getting the same error and CM11 isn't installing lol
dougy.boi said:
It worked thank you soooo much!! Lol but with all that done Im still getting the same error and CM11 isn't installing lol
Click to expand...
Click to collapse
Download CM again or simply from another source and before you transfer the .zip file to your phone, compare the MD5 of both files to check if the download was successful.
dougy.boi said:
I have an AT&T S3 I have clockworkmod 6.0.4.7. I am trying to install cm-11-20140210-SNAPSHOT-M3-d2att.zip but every time I do the install is aborted and I get a status 7 error. I tried installing TWP but though goo manager but my recovery mode is still in clockworkmod. Please help me figure out how to install this latest version of Kit Kat rom.
Click to expand...
Click to collapse
This forum is for i9300 intl version of the S3.
Your device is i747. Please refer to this forum for your device.
~ RazorMC
Related
When I start CWM Manager v3.60 it comes up saying
This version of CWM Manager should be used with CF-CWM v1.1 or newer. It appears you are running a different recovery. Various features have been disabled.
Click to expand...
Click to collapse
When I boot into recovery it shows at the top:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
I flashed it with Odin v3.04 using file CF-Root-SGS3-v6.4.tar
I've tried Odin v1.85 and I've tried reflashing with a tar file from a different source.
I've tried the recovery-cf-cwm-i9300-1.5-gsm.tar from the Samsung Galaxy S3 ToolKit
Also, I've read a bunch of guys on the [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager thread (starting from post 332 onwards) who have the same problem but I can't see any reported solution.
Any ideas how I get round this error, guys?
Many thanks.
Jake. said:
When I start CWM Manager v3.60 it comes up saying
When I boot into recovery it shows at the top:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
I flashed it with Odin v3.04 using file CF-Root-SGS3-v6.4.tar
I've tried Odin v1.85 and I've tried reflashing with a tar file from a different source.
I've tried the recovery-cf-cwm-i9300-1.5-gsm.tar from the Samsung Galaxy S3 ToolKit
Also, I've read a bunch of guys on the [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager thread (starting from post 332 onwards) who have the same problem but I can't see any reported solution.
Any ideas how I get round this error, guys?
Many thanks.
Click to expand...
Click to collapse
Whats is ur firmware? is it JB. It still not fully compatible with JB. It might be the issues. Same problems here
Jake. said:
When I start CWM Manager v3.60 it comes up saying
When I boot into recovery it shows at the top:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
I flashed it with Odin v3.04 using file CF-Root-SGS3-v6.4.tar
I've tried Odin v1.85 and I've tried reflashing with a tar file from a different source.
I've tried the recovery-cf-cwm-i9300-1.5-gsm.tar from the Samsung Galaxy S3 ToolKit
Also, I've read a bunch of guys on the [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager thread (starting from post 332 onwards) who have the same problem but I can't see any reported solution.
Any ideas how I get round this error, guys?
Many thanks.
Click to expand...
Click to collapse
Same answer use the older version of CF Root v 5 .
jje
JJEgan said:
Same answer use the older version of CF Root v 5 .
jje
Click to expand...
Click to collapse
same here, so its bcoz its not fully compatible with JB yet, i hope this thread will be updated when there is a fix
kerbiii said:
same here, so its bcoz its not fully compatible with JB yet, i hope this thread will be updated when there is a fix
Click to expand...
Click to collapse
No its unlikely to be updated see Chainfires Autorot post in dev section .
jje
Is there any solution to this? I looked in the threads and am clearly not able to find it.. Can anybody point me in the right direction?
any update
Jake. said:
When I start CWM Manager v3.60 it comes up saying
When I boot into recovery it shows at the top:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
I flashed it with Odin v3.04 using file CF-Root-SGS3-v6.4.tar
I've tried Odin v1.85 and I've tried reflashing with a tar file from a different source.
I've tried the recovery-cf-cwm-i9300-1.5-gsm.tar from the Samsung Galaxy S3 ToolKit
Also, I've read a bunch of guys on the [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager thread (starting from post 332 onwards) who have the same problem but I can't see any reported solution.
Any ideas how I get round this error, guys?
Many thanks.
Click to expand...
Click to collapse
any Solution on these?
same problem，still waiting for author‘s updating...
same problem on ice
Jake. said:
When I start CWM Manager v3.60 it comes up saying
When I boot into recovery it shows at the top:
CWM-based Recovery v5.5.0.4 : : CF-v1.5
I flashed it with Odin v3.04 using file CF-Root-SGS3-v6.4.tar
I've tried Odin v1.85 and I've tried reflashing with a tar file from a different source.
I've tried the recovery-cf-cwm-i9300-1.5-gsm.tar from the Samsung Galaxy S3 ToolKit
Also, I've read a bunch of guys on the [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager thread (starting from post 332 onwards) who have the same problem but I can't see any reported solution.
Any ideas how I get round this error, guys?
Many thanks.
Click to expand...
Click to collapse
Install CWM with ROM Manager and problem should be solved.
KR
John
same problem.
Just boot into recovery, cwm manager won't be updated as Chainfire has moved away from custom recoveries.
You don't need it so there really isn't a problem
first of all sorry for stupid dumb question..
just rootedy s3 4.1.2 i9300..
im getting same error when i open cwm..this version cwm manager should be used.....blah blah..
i have rooted it using odin..
im wondering can i able to flash new rom via cwm recovery? is this error doesnt matter?
yeah..i know feels like stupid question..
iam newbie..just entered into custom roms..
please help me..
a help is always appreciated.
thank you in advance..
praveen55 said:
first of all sorry for stupid dumb question..
just rootedy s3 4.1.2 i9300..
im getting same error when i open cwm..this version cwm manager should be used.....blah blah..
AS it says on the instructions no longer supported .
i have rooted it using odin..
im wondering can i able to flash new rom via cwm recovery?
YES CWM manager is not used now just boot to recovery .
jje
Click to expand...
Click to collapse
JJEgan said:
praveen55 said:
first of all sorry for stupid dumb question..
just rootedy s3 4.1.2 i9300..
im getting same error when i open cwm..this version cwm manager should be used.....blah blah..
AS it says on the instructions no longer supported .
i have rooted it using odin..
im wondering can i able to flash new rom via cwm recovery?
YES CWM manager is not used now just boot to recovery .
jje
Click to expand...
Click to collapse
thank you i am waiting for reply.. thanks again.
are you saying iam still able to flash roms via cwm recovery but not with cwm manager APP??
Click to expand...
Click to collapse
So can CWM Manager be uninstalled? Is it needed at all for custom roms?
SDBuch said:
So can CWM Manager be uninstalled? Is it needed at all for custom roms?
Click to expand...
Click to collapse
Only really old roms come with it dont they? You dont need it.
rootSU said:
Only really old roms come with it dont they? You dont need it.
Click to expand...
Click to collapse
Im really new to this but willing to learn, I used this root file CF-Root-SGS3-v6.4 (2) and it came with CWM after rooting. Iv Setup recovery through ROM Manager to Clockworkmod 6.0.3.6 and I no longer get an error when opening ROM Manager but still get an error when opening the CWM App but if it is now redundant I wont worry.
Just backed up backed up current ROM (stock OS rooted) to check all is ok and seems to have saved it fine so its working as it should.
Just downloading a custom ROM on laptop now so want to get it right before i flash it
SDBuch said:
Im really new to this but willing to learn, I used this root file CF-Root-SGS3-v6.4 (2) and it came with CWM after rooting. Iv Setup recovery through ROM Manager to Clockworkmod 6.0.3.6 and I no longer get an error when opening ROM Manager but still get an error when opening the CWM App but if it is now redundant I wont worry.
Just backed up backed up current ROM (stock OS rooted) to check all is ok and seems to have saved it fine so its working as it should.
Just downloading a custom ROM on laptop now so want to get it right before i flash it
Click to expand...
Click to collapse
You dont need CWM manager or ROM manager. Its best to use it manually.
Please read general > Sticky roll-up thread > Understanding the basics before rooting
rootSU said:
You dont need CWM manager or ROM manager. Its best to use it manually.
Please read general > Sticky roll-up thread > Understanding the basics before rooting
Click to expand...
Click to collapse
Cheers for the links dude, I'll have a good read tonight. Maybe should of found those befor iI rooted and flashed a custom ROM but it looks like iv been lucky to do everything right so far!
Thanks again.
Hi I'm rooting my phone by using odin3 1.85. this worked fine but now I'm using superoneclick which is always stopping on step 7
Try flashing a custom kernel that is already rooted like CF-Root kernel through odin. It's the fastest method out there. AFAIK SuperOneClick doesn't work on our device.
Bdw, you should've posted in the Q and A section
Sent from my GT-I9100 using xda premium
manoxus said:
Hi I'm rooting my phone by using odin3 1.85. this worked fine but now I'm using superoneclick which is always stopping on step 7
Click to expand...
Click to collapse
Are you on ICS?? If so follow the below steps if you don't wanna custom ROM flashing
http://forum.xda-developers.com/showthread.php?t=1501719
Sent from my GT-I9100 using Tapatalk 2
I have managed to get root access but there is still problem with installing custom rom (Cyanogenmod) I'm getting this msq in recovery
failed to verify whole-file signature
manoxus said:
I have managed to get root access but there is still problem with installing custom rom (Cyanogenmod) I'm getting this msq in recovery
failed to verify whole-file signature
Click to expand...
Click to collapse
Flash it via CWM recovery
Swyped from my Samsung Galaxy SII
I have tried to install it by CWM 2.5.1.2 (by accessing it before system boots) but still getting this error
manoxus said:
I have tried to install it by CWM 2.5.1.2 (by accessing it before system boots) but still getting this error
Click to expand...
Click to collapse
1.boot to CWM recovery
Update/flash zip from SD
Toggle signature verification
Then flash your ROM now
Or
2. Flash Siyah kernel first via CWM recovery, it has updated CWM recovery version 6.x
Then flash the Rom
Swyped from my Galaxy SII
CyanogenMod needs CWM5+.
I have download syiah kernel and tried to install it by CWM which gave me the same msq and odin freezing when installing it
I have new SGS2 with 2.6.35.7-I9000xxjw4 kernel and the phone is already rooted
manoxus said:
I have download syiah kernel and tried to install it by CWM which gave me the same msq and odin freezing when installing it
I have new SGS2 with 2.6.35.7-I9000xxjw4 kernel and the phone is already rooted
Click to expand...
Click to collapse
ok.
then use mobile odin to flash the kernel.
I bought mobile odin and that is the same issue freezing in "Flashing flash kernel"
manoxus said:
I bought mobile odin and that is the same issue freezing in "Flashing flash kernel"
Click to expand...
Click to collapse
Did you grant it root access?
I did and I had to reboot it now I'm stuck on Galaxy S creen
manoxus said:
I did and I had to reboot it now I'm stuck on Galaxy S creen
Click to expand...
Click to collapse
what?
can you still access CWM recovery?
I can access just downloading mode and I have tried kernels which worked
Siyah-v3.3.2 and XWKDD_insecure non of them works now
manoxus said:
yas I can access recovery and downloading mod and odin updates kernel but non of which i have works
Siyah-v3.3.2 and XWKDD_insecure
Click to expand...
Click to collapse
download siyah 2.x.x?
by the way, i think it's time to upgrade to ICS once and for all bro
That is the reason to doing this to upgrade to ICS but can't figure out it on these phone it has worked fine on other 2 phones
how to upgrade to ICS from Downloading mode ?
manoxus said:
That is the reason to doing this to upgrade to ICS but can't figure out it on these phone it has worked fine on other 2 phones
how to upgrade to ICS from Downloading mode ?
Click to expand...
Click to collapse
Do you know how to flash via Odin?
Swyped from my Galaxy SII
sure but I'm confused which kernel should I use or can I upgrade ICS from odin ?
manoxus said:
sure but I'm confused which kernel should I use or can I upgrade ICS from odin ?
Click to expand...
Click to collapse
Yeah, you can upgrade directly via Odin.
Swyped from my Galaxy SII
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Delphinus3 said:
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Click to expand...
Click to collapse
How do you flash recovery? What instructions did you follow?
Here!
Follow this tutorial!..
TheMidgardWatcher said:
How do you flash recovery? What instructions did you follow?
Click to expand...
Click to collapse
ALL - via android consule, via odin, and i dont know about other method. with all other devices i had NO problem at all and i flashed many roms before. its the fors time something like that happened to me.
Try this with Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.25.0-i9300.tar.md5 Put it at "PDA". What error gives you Odin ? Is the phone rooted ? Have you tried installing with CWM Manager from playStore ? Also, try TWRP Manager app, as I believe it does not require root to install the recovery. After TWRP is installed, download the CWM zip and flash it. Ypour friend is running stock ROM, right ?
If you're Rooted then download and install "ROM Manager" From Play Store and that'll guide you through installing the latest CWM for your device. This is the safest method i know.
Hello all, having alot of trouble installing a custom rom. I've tried many different roms like beanstalk, cm, liquid smooth rom but to no avail, i still get the same error this is a i717 status 7 installation aborted. Yes i've read other posts i've searched for and have read the instructions but for the life of me keep getting the same error. I have also flashed different clockwork mods and twrp versions, yes it is rooted. I have a att sgh-i717 running android 2.3.6, baseband i717ucla1, kernel: 2.6.35.11, build: gingerbread.ucla1. It is unlocked to tmobile and would like to install custom rom cause this stock rom is soo boring :crying: If it has been answered please mods delete and will keep searching, Thanks.
Simple.....your recovery needs to be updated.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
Simple.....your recovery needs to be updated.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
since I had to go back to cwm-based recovery v5.5.04 in order to restore, then the newest version of cwm is v6.0.1.4. When I use odin it says I have 9 counts, because of the different versions of cwm and twrp ive flashed. Ive google cwm and this cwm-i717-6.0.1.4-20121002-signed I downloaded, it is the one on this forum. I look for it on odin but it doesn't show the file do I have to change the extension cause it only reads tar, md5 and smd or I just install through cwm
svoooll said:
since I had to go back to cwm-based recovery v5.5.04 in order to restore, then the newest version of cwm is v6.0.1.4. When I use odin it says I have 9 counts, because of the different versions of cwm and twrp ive flashed. Ive google cwm and this cwm-i717-6.0.1.4-20121002-signed I downloaded, it is the one on this forum. I look for it on odin but it doesn't show the file do I have to change the extension cause it only reads tar, md5 and smd or I just install through cwm
Click to expand...
Click to collapse
both of these are flashable zips, no Odin
both threads are in the Development section if you need to read up a bit
CWM touch 6.0.4.3
http://forum.xda-developers.com/attachment.php?attachmentid=2572557&d=1392109409
TWRP 2.7.0.0.
http://www.androidfilehost.com/?fid=23329332407584784
not sure what you mean by " 9 counts"
captemo said:
both of these are flashable zips, no Odin
both threads are in the Development section if you need to read up a bit
CWM touch 6.0.4.3
http://forum.xda-developers.com/attachment.php?attachmentid=2572557&d=1392109409
TWRP 2.7.0.0.
http://www.androidfilehost.com/?fid=23329332407584784
not sure what you mean by " 9 counts"
Click to expand...
Click to collapse
That did the job finally after 4 months trying to figure it out off and on, trying different recoveries. I appreciate it