Related
Hello guys! I have a flytouch 2,superpad sawee10 and i tried to flash it..i tried both methods sdcard and usb male to male. i followed many guides and many tutorials.. flash is always successful but always my tablet WONT boot! its always stuck in "A N D R O I D_" or in the green screen..denepds on the image its stucks in different places(or android_ or green screen).. i tried to wipe factory reset etc etc from the recovery menu but nothing worked..in one image after the wipe it sways kernel panic! so i need to flash it again and again stuck in android or green page.. please help me!
Have you tried flashing different roms?
Theonew said:
Have you tried flashing different roms?
Click to expand...
Click to collapse
yes my friend i tried "stragulus" or something like this..i tried smarkies guide. i tried 3245, 2852 etc.. everything stucks in a n d r o i d _ or in the green image.. i also tried uboot 0.6.1.5(587) and 0.6.1.2 etc.. i remember in the manu it used to say swaee10
edit later:
forgot to tell you that the FIRST time that i tried to flash this tablet it was stuck in "a n d r o i d _" and after pressing home+back+power it flashed recovery image and tablet opened with 90 degrees wrong screen! tried calibrating gsensor but didnt work.. now after pressing home+back+power it does something but later it says "invalid file system,please check your zSYS.img" .. so im stuck.. im able to flash all images but always stuck
christz said:
yes my friend i tried "stragulus" or something like this..i tried smarkies guide. i tried 3245, 2852 etc.. everything stucks in a n d r o i d _ or in the green image.. i also tried uboot 0.6.1.5(587) and 0.6.1.2 etc.. i remember in the manu it used to say swaee10
Click to expand...
Click to collapse
Were all of these roms made for your device?
Theonew said:
Were all of these roms made for your device?
Click to expand...
Click to collapse
i edited the previous post you can check.. well these roms say flytouch 2 superpad..
Do a full wipe (cache,data) and check post #8.
Theonew said:
Do a full wipe (cache,data) and try this rom: http://androidforums.com/gome-flyto...ouch-3-firmware-update-official-releases.html .
Click to expand...
Click to collapse
hello my friend.i read in many forums to do that wipe thing because of the green stuck and i did it but didnt work.. i will do that wipe again and then flash the image that you told me..but are you sure this is a correct one?i mean this is for flytouch 3 but i have flytouch 2(the tablet with the 2 sd cards).. do you confirm that i should flash this? thank you for your help!!
christz said:
hello my friend.i read in many forums to do that wipe thing because of the green stuck and i did it but didnt work.. i will do that wipe again and then flash the image that you told me..but are you sure this is a correct one?i mean this is for flytouch 3 but i have flytouch 2(the tablet with the 2 sd cards).. do you confirm that i should flash this? thank you for your help!!
Click to expand...
Click to collapse
My mistake . Do not flash that rom. Use this instead: http://www.crashzilla.com/support/Updates/deb-r2.1.1623/update.zip . It's from here: http://www.crashzilla.com/support/ (in the Flytouch 2 section).
Theonew said:
My mistake . Do not flash that rom. Use this instead: http://www.crashzilla.com/support/Updates/deb-r2.1.1623/update.zip . It's from here: http://www.crashzilla.com/support/ (in the Flytouch 2 section).
Click to expand...
Click to collapse
yes i tried that but as i remember the installation was stopping because of something like authentication or license..something like this..
christz said:
yes i tried that but as i remember the installation was stopping because of something like authentication or license..something like this..
Click to expand...
Click to collapse
Do you know the exact error?
Theonew said:
Do you know the exact error?
Click to expand...
Click to collapse
my friend if you have enough time(i think i need 10-15 mins) i will be able to try it again and tell you the exact error!! thanks for your help!
christz said:
my friend if you have enough time(i think i need 10-15 mins) i will be able to try it again and tell you the exact error!! thanks for your help!
Click to expand...
Click to collapse
Don't worry about the time. You gotta do what you gotta do .
Theonew said:
Don't worry about the time. You gotta do what you gotta do .
Click to expand...
Click to collapse
thank you. im flashing 2852(with usb to usb) now in order to make the tablet boot(even if it stucks) so i can get into recovery mode and do the update.zip.
christz said:
thank you. im flashing 2852(with usb to usb) now in order to make the tablet boot(even if it stucks) so i can get into recovery mode and do the update.zip.
Click to expand...
Click to collapse
Report the results when you're done .
Theonew said:
Report the results when you're done .
Click to expand...
Click to collapse
i didnt install 2852..i install a package that i got with name Flytouch_2 and it has burntool inside and a folder android..anyway after that i went in recovery menu and wipe data and cache and it now it didnt say any error!
finding update package...
opening update package...
verifying update package...
installing update...
install from sdcard complete.
E:cant' open /cache/recovery/log: No suck file or directory..
then i select reboot and rebooted and i saw an "earth" and some other stars and then the green page powered by wowpad and im stuck here.. what to do now?keep the power button to close and open it again?
PS im in uboot 0.6.1.2(587)
i didnt do anything and after being in green page it rebooted automatically and again stuck in green page
christz said:
i didnt install 2852..i install a package that i got with name Flytouch_2 and it has burntool inside and a folder android..anyway after that i went in recovery menu and wipe data and cache and it now it didnt say any error!
finding update package...
opening update package...
verifying update package...
installing update...
install from sdcard complete.
E:cant' open /cache/recovery/log: No suck file or directory..
then i select reboot and rebooted and i saw an "earth" and some other stars and then the green page powered by wowpad and im stuck here.. what to do now?keep the power button to close and open it again?
PS im in uboot 0.6.1.2(587)
Click to expand...
Click to collapse
At least some progress was made but it looks like you are just going to keep flashing roms until one works. Since you didn't get the error this time, then maybe you can flash the roms you were trying to flash earlier and possibly one may work.
ok i will do that my friend..now after 2 automatical reboots it says X ERROR OCCURED: BOOTING SYSTEM FAILURE X
you can select YES to try recover, but your personal data will be lost
HOME=YES MENU=NO
im hitting yes. it doesnt do anything i hit no..nothing.now i see the green again
i want to ask you something..is my tablet bricked or no?i think no because if it was bricked it wouldnt get flashed..right? thank you!
christz said:
ok i will do that my friend..now after 2 automatical reboots it says X ERROR OCCURED: BOOTING SYSTEM FAILURE X
you can select YES to try recover, but your personal data will be lost
HOME=YES MENU=NO
im hitting yes. it doesnt do anything i hit no..nothing.now i see the green again
Click to expand...
Click to collapse
Strange. Anyways, the device is still alive (not bricked) which is the good thing. Keep on flashing (hope it doesn't take too long to get one to work).
Hi to all !
I´ve flashed this kernel ( http://forum.xda-developers.com/showthread.php?p=42378027&nocache=1 ) with latest CM 10.1 nighty and after rebooting gave some graphical glitches , and then i cannot go further with that.My phone kept in black screen
I even cannot go to recovery or download mode . After some minutes i was sucessfully enter in recovery, but the problem now is that i have´t touch in my phone . I have acess only at the physical buttons .
I´v sucessfully flashed the latest nightly , but i cannot put my pin , or do the normal thing with the phone because I have no touch.
Can someone help ? Any solution besides formating ?
thanks
what phone model do you have? what does it say under the battery?
Glebun said:
what phone model do you have? what does it say under the battery?
Click to expand...
Click to collapse
GT-i9300
After some minutes with power off, i´ve tried to reboot , and now is in bootloop
Edit : Stuck in CM10.1 bootlogo .
Tuga2010 said:
Hi to all !
I´ve flashed this kernel ( http://forum.xda-developers.com/showthread.php?p=42378027&nocache=1 ) with latest CM 10.1 nighty and after rebooting gave some graphical glitches , and then i cannot go further with that.My phone kept in black screen
I even cannot go to recovery or download mode . After some minutes i was sucessfully enter in recovery, but the problem now is that i have´t touch in my phone . I have acess only at the physical buttons .
I´v sucessfully flashed the latest nightly , but i cannot put my pin , or do the normal thing with the phone because I have no touch.
Can someone help ? Any solution besides formating ?
thanks
Click to expand...
Click to collapse
so as your physical buttons are working, you should be able to enter download mode(remove the battery for 5 minutes and re-insert) . then try flashing a stock rom. if you can backup the data, do it. good luck.
sriram231092 said:
so as your physical buttons are working, you should be able to enter download mode(remove the battery for 5 minutes and re-insert) . then try flashing a stock rom. if you can backup the data, do it. good luck.
Click to expand...
Click to collapse
does flashing stock rom via odin help?
I forget to mentioned , that the menu button and the back button ( non - physical ) works.
psndna88 said:
does flashing stock rom via odin help?
Click to expand...
Click to collapse
not 100% sure. but it's worth trying.
sriram231092 said:
not 100% sure. but it's worth trying.
Click to expand...
Click to collapse
didn´t solve the problem .
if it doesn't work after a factory reset, send it to service, no other solution
Tuga2010 said:
didn´t solve the problem .
Click to expand...
Click to collapse
agree with glebun.
sriram231092 said:
agree with glebun.
Click to expand...
Click to collapse
Can anyone pass here and see the problem : http://forum.xda-developers.com/showthread.php?p=42383555&posted=1#post42383555
The developer by mystake as uploaded a Galaxy Note 2 kernel in Galaxy S3 thread , and he said that is probably a kernel boot.img problem.
thanks
Tuga2010 said:
Can anyone pass here and see the problem : http://forum.xda-developers.com/showthread.php?p=42383555&posted=1#post42383555
The developer by mystake as uploaded a Galaxy Note 2 kernel in Galaxy S3 thread , and he said that is probably a kernel boot.img problem.
thanks
Click to expand...
Click to collapse
note2 kernel is totally different from s3. probably that should have damaged the touch on your phone. that is a big mistake by the dev and you can do nothing but taking it to service center. good luck.
okay, now it's a 100% that you need a service center job. your touch chip is fried due to the voltage differences
Hi all i had 4.1.2 stok with some bloatware removed and siyah kernel , everything was fine till i was tempted by the so called ubber fast other roms.
Installed cm installer got snapshot 10.2 and there start my trouble. Phone was fine but it was randomly freezing and sometimes reboot others not. 1st time i was dealing with this , checked waht version i had , saw it wasnt the stable one (my phone didnt gave any info for update to stable btw) so i thought thats it.
Installed cm 10.2 once phone booted , freeze. Just like that on 1st sec. Cleaned dalvnik , cleaned data , problem still there ...
Installed 4.3 (http://forum.xda-developers.com/showthread.php?t=2569180) almost stok , updated modem , cleaned chaches , format system , format cache , deleted everything i could find to delete/format from recovery (cwm 6.0.4.4 touch) exept sdcard...
Guess what ? Problem still there
It can be when i touch to type a sms , when i hit enter on a url to load , when i open an app or it will reboot just byitself (i hear boot sound so i have to type the pin).
Any ideas at all on what should i do ?
Ps : I have the idea that it all started when i reinstalled cerberus app on cm 10.2 snapshot edition, but that would be impossible after so many wipes wouldnt it ?
Is there any way to monitor what activity is causing it to freeze?
try installing a custom kernel, maybe something to improve
mojonx0droid said:
try installing a custom kernel, maybe something to improve
Click to expand...
Click to collapse
Over 3 roms 3kernels changed while flashing rom.
You have read the FREEZING thread ???
lucifsg said:
Over 3 roms 3kernels changed while flashing rom.
Click to expand...
Click to collapse
test using a rom with pit
JJEgan said:
You have read the FREEZING thread ???
Click to expand...
Click to collapse
nope can have a link to that ?
lucifsg said:
nope can have a link to that ?
Click to expand...
Click to collapse
I am far to lazy to search for you a clue the stickied faqs and guides .
mojonx0droid said:
test using a rom with pit
Click to expand...
Click to collapse
could u explain what pit would do ?
havent seen a rom with pit quite some time..
JJEgan said:
I am far to lazy to search for you a clue the stickied faqs and guides .
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2133401&page=106
hope u aint reffering to that ... 107 pages and there is no solid answer about it , looks like im screwed
Try using the app contained in that thread, once you've flashed full stock.
Freezing is usually nand damage, no fix is possible -freezing is the work around in action. Wait until the freeze stops and it should get better as the os learning to avoid the bad blocks.
boomboomer said:
Try using the app contained in that thread, once you've flashed full stock.
Freezing is usually nand damage, no fix is possible -freezing is the work around in action. Wait until the freeze stops and it should get better as the os learning to avoid the bad blocks.
Click to expand...
Click to collapse
did it, 3,5 days no freeze then it slowly start again as i see.
Should i do it again ? Isnt there some way finding those faulty locations and force os never to read/write again ?
My girlfriend s3 was having that symptoms a few days after that leads to sudden death. Try check it with emmc brick bug from google play. I might be wrong tho.
lucifsg said:
did it, 3,5 days no freeze then it slowly start again as i see.
Should i do it again ? Isnt there some way finding those faulty locations and force os never to read/write again ?
Click to expand...
Click to collapse
There are more tips in the freezing thread but, as I understand, the freezes are the os learning to avoid the bad blocks -if it's getting worse then emmc chip may be cascading. There is no cure, apart from a new motherboard which should be covered by warranty.
Today Some Of My Games were Not Running .. So I thought To install Chainfire 3D On My Mote E. Upon Installing Chainfire 3D, Phone Restarted and Then After It ,It is Not Booting Up.. It stay For ever at " Bootlocker Unlocked " Page.. Nothing After It .. I tried Going Into TWRP Recovery ,Did Everything Possible From There, i.e, Wipe Data To Format Data But Nothing Seems To Be Working ..
Please Help Me Out As Its Being Only A week I Had This Phone And My Parents Are Now Going to Kill For Messing Up All this.
Please Senior Member.. Help Me Out
Thanks..
Crying !!
Contact flipkart ASAP!
^ Contact flipkart ? The OP has unlocked the bootloader and rooted the phone. The OP also installed Chainfire 3D and modified the software of the device. If I were flipkart owner/staff, even I would'nt help such customers frankly.
What I suggest is, you remove the modifications made by Chainfire 3D to the system if any via adb in TWRP.
If you decided to root your device you should always remember, "With great power, comes great responsibility".
Shravanramjas said:
Today Some Of My Games were Not Running .. So I thought To install Chainfire 3D On My Mote E. Upon Installing Chainfire 3D, Phone Restarted and Then After It ,It is Not Booting Up.. It stay For ever at " Bootlocker Unlocked " Page.. Nothing After It .. I tried Going Into TWRP Recovery ,Did Everything Possible From There, i.e, Wipe Data To Format Data But Nothing Seems To Be Working ..
Please Help Me Out As Its Being Only A week I Had This Phone And My Parents Are Now Going to Kill For Messing Up All this.
Please Senior Member.. Help Me Out
Thanks..
Crying !!
Click to expand...
Click to collapse
If you had took a backup of the ROM before all these, restore that backup from TWRP else,
Flash the stock firmware by following this: http://forum.xda-developers.com/showthread.php?t=2756609
I've no idea why you install CF-3D in the first place because the dev has clearly mentioned its supported till GB, and not further beyond even though its reported to work on ICS/JB devices. So you should've took some precautions before attempting these kind of risky operations.
coolsandie said:
If you had took a backup of the ROM before all these, restore that backup from TWRP else,
Flash the stock firmware by following this: http://forum.xda-developers.com/showthread.php?t=2756609
I've no idea why you install CF-3D in the first place because the dev has clearly mentioned its supported till GB, and not further beyond even though its reported to work on ICS/JB devices. So you should've took some precautions before attempting these kind of risky operations.
Click to expand...
Click to collapse
Thank You very Much Man !!! U saved me .. I Just Reflashed The Whole Stock Rom And Voila , My Moto E Takes A Rebirth..
Ya I Know about The Risks That Prevalent .. Now on wards i Take Care Of all this ****ty Attempts..
Peace !
Shravanramjas said:
Thank You very Much Man !!! U saved me .. I Just Reflashed The Whole Stock Rom And Voila , My Moto E Takes A Rebirth..
Ya I Know about The Risks That Prevalent .. Now on wards i Take Care Of all this ****ty Attempts..
Peace !
Click to expand...
Click to collapse
Also remember that you can run 'adb logcat' when you boot up the phone. This will show any errors if you get stuck in a bootloop.
Normola said:
Also remember that you can run 'adb logcat' when you boot up the phone. This will show any errors if you get stuck in a bootloop.
Click to expand...
Click to collapse
i Have To Run This Command While The Phone Is still Booting??
Shravanramjas said:
i Have To Run This Command While The Phone Is still Booting??
Click to expand...
Click to collapse
If you want to get everything from startup to crash, power of the device while it's plugged into to your USB port, run the command then power on. You should hopefully get a full boot up log and any fatal error messages.
Most common boot loop issue I tend to see is usually bad permissions after installing stuff. You can fix that in TWRP recovery tho.
Bit late tho sorry
I too did the same thing... Ie installed chainfire 3d on a Jb phone...luckily I knew how to flash stock ROM via ODIN ( it was a Samsung)
Anyway chainfire alternative on JB KK phones is GLtools
https://play.google.com/store/apps/details?id=com.n0n3m4.gltools
Also do not forget to keep the zip file and flash it in case your phone does not boot up after installing! The zip file gets automatically copied to sdcard I think for later emergency flashing
Sent from my XT1033 using Tapatalk
Hi,
I lost my root when I uninstalled magisk + superSU update wasnt working, so I went to TWRP to install superSU 2.62 again (which is the one I installed for Pure IMUI ROM when I first rooted it).
I know that it takes a while to boot after flashing superSU (around 30min), but 1:30h has passed and phone still on "HONOR" screen. The animation still going, phone simply doesnt go past that.
My phone memory is almost full, is that the reason it takes even longer?
Thank you
Don't mind anymore. No one replied to this + I got tired of waiting for the phone to boot.
Restoring old backup.
joaomPT said:
Don't mind anymore. No one replied to this + I got tired of waiting for the phone to boot.
Restoring old backup.
Click to expand...
Click to collapse
Please try the latest zip of SuperSU.
Sent from my Honor 8 using XDA Labs
Hello,
Thanks for the reply, I will try it the next time I need it. I just didnt do this because by the time I installed my current rom, only SuperSU 2.62 would work.
I no longer need to do this atm because I restored old backup.
But thanks alot,
Cheers
joaomPT said:
Hello,
Thanks for the reply, I will try it the next time I need it. I just didnt do this because by the time I installed my current rom, only SuperSU 2.62 would work.
I no longer need to do this atm because I restored old backup.
But thanks alot,
Cheers
Click to expand...
Click to collapse
Ok goodluck.
Sent from my Honor 8 using XDA Labs
joaomPT said:
Don't mind anymore. No one replied to this + I got tired of waiting for the phone to boot.
Restoring old backup.
Click to expand...
Click to collapse
It is good to have a backup each time ,when u try to modify the system . This will help u immediately restore back to original state. Glad that u had an old backup .
gopinaidu77 said:
It is good to have a backup each time ,when u try to modify the system . This will help u immediately restore back to original state. Glad that u had an old backup .
Click to expand...
Click to collapse
Yes indeed. In my case, I got a backup from a fresh (current) rom install. So if any time my.phone goes slow or out of space, I just restore the bavkup and start all over ?
joaomPT said:
Yes indeed. In my case, I got a backup from a fresh (current) rom install. So if any time my.phone goes slow or out of space, I just restore the bavkup and start all over ?
Click to expand...
Click to collapse
Great