Related
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
QNBT said:
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
Click to expand...
Click to collapse
thanks a lot i just want to share this information with some people and solve many questions
squallo37 said:
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
Click to expand...
Click to collapse
Ace break by rom manager
not know about odin if choose wrong files in wrong option as not tried yet but if i'm not wrong if you choose wrong files md5 sum not gonna correct so it shows error and not let you to flash if you choose wrong option
nims11 said:
Ace break by rom manager
Click to expand...
Click to collapse
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Samsung S5830 brick problem
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Click to expand...
Click to collapse
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
EmoBoiix3 said:
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
What it works????
I already beicked my phone in two week after buy cause that crap app
i not think it work on your phone well
may be its now supported or something thats why you use
im happy with cwm app
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Go to samsung service centre
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Try a different kohm ?
Forever living in my Galaxy Ace using XDA App
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
Only way to get it fixed is by changing the mother board..experienced the same a few months ago..
Sent from my GT-S5830 using Tapatalk
I m also using galaxy ace but nothing seems to me like that, it is working properly for me.
MY SG2 cant boot cannot go in recovery and cant in download mode after flash. plz give a tip to go in download mode???????
God will not reveal us the history ...what did you do with your phone, what crap have been flashed...
in the first instance try removing battery and put back after sometime and try the 3 botton for Download Mode
i will do many time but no responce. how many time i mean 1 hour or more time
ZACQ8 said:
what crap have been flashed...
Click to expand...
Click to collapse
relisys667 said:
i will do many time but no responce. how many time i mean 1 hour or more time
Click to expand...
Click to collapse
What did you actually do to get your phone into its current state?
On top of that,
What model is the phone? (i9100, i9100G, i9100T, etc)
model is i9100 now its in the state total off no screen on nor working recovery or download mode i put off battery two hours
Your inability to answer simple questions leads me to suggest that you should contact Samsung. We cannot help you.
i am using turkbey rom v11 after install cracked version of rom manager. i want creat backup current rom.in recovery mode many red lines shows.then i reflash it with odin it stuck on communication .after that fone goes in this stage.plz anybody help me.
relisys667 said:
after install cracked version of rom manager.
Click to expand...
Click to collapse
Good luck getting any more help.
You can try to get into Download mode using USB Dongle Jig.
If not, JTAG is the only way to unbrick. Unbrivk with JTAG costs about 50$ in my country. It will totaly reflashe the rom (bootloader, kernel, etc.).
Also check this topick http://forum.xda-developers.com/showthread.php?t=1615058
Why why why
well for downloading crap you get crap lololololololololol
isay sum1 deletes previous thread also by vurda lolololololol
might help lolol
http://youtu.be/JmvCpR45LKA
relisys667 said:
.... after install cracked version of rom manager ....
Click to expand...
Click to collapse
oinkylicious said:
Good luck getting any more help.
Click to expand...
Click to collapse
Vurda said:
You can try to get into Download mode using USB Dongle Jig.
If not, JTAG is the only way to unbrick. Unbrivk with JTAG costs about 50$ in my country. It will totaly reflashe the rom (bootloader, kernel, etc.).
Also check this topick http://forum.xda-developers.com/showthread.php?t=1615058
Click to expand...
Click to collapse
Helping is encouraging!! Please refrain
after j tag reflash can i root the fone as a normal fone and plz guide me fone is running nomal like the others genuine galaxy s2.
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Hi ive just got message from my friend asking if i could help his friend with takeing back to life his galaxy s2.
As i know he tried to remove simlock, but after this he brick his phone. I know that is hard to know what is wrong from this small description, but i know that he "broke his galaxy s2"
He is getting on phone:
Step 1
error not saved
You have busybox problem, fix it or if you have plugged your phone on ypur computer, unplug it
Click to expand...
Click to collapse
Or similar. Im third, so there can be some mistakes.
Its sth with busybox, but i dont know what.
Maybe we need only to install busybox or reflash soft? Or its permanent and only service helps?
Sent using tf300t - stock JellyBean (docked/nonrooted)
Why dont you reflash firmware? A fresh install?
Sent from my iPhone using Tapatalk
unfortunately you have given little and vague information.
What rom is he running ?
Can he getinto recovery or download mode ?
If he can get into one of these 2 modes, then a simple reflash may solve the problem.
If he cannot get into these modes, then you may need to send it in for repair.
He didn't mess with the EFS folder, did he?
Sent from the little guy
Odp: Brick after simlock
I dont know to much too.
He is using stock ics firmware as "normal" user.
And u gave me an answer that firmware reflash can hel. Thanks. We will try it
EDIT: Ok friends friend dont want to wait and gave device to service paying 60pln (~15€, ~20$) for reflash and it helped.
Sent using tf300t - stock JellyBean (docked/nonrooted)