Well, I have a L5 ii e450F.
When I use it with only 2G network, it works normally. Now when I use only 3G or 2G/3G altomatico mode is appearing all the time: Restricted access changed, ai loses all connection to the phone network (the chip) ai symbol in the signal tower is a small red circle type prevented from using this service, I have to unplug and plug the device again. (You know here has 3g usually flawless)
You know, I have done everything already updated the rom for the LG program, already swapped the rom kdz also has some other solution? 2g be using when I'm on the street is the same thing I ta without apparatus. I have wifi at home, in the street more complicated. It has it's version 4.1.2, as I have to downgrade to an older version of android? Because I saw that some other devices gave this error when updating it.
Sou Brasileiro, tou usando tradutor.
up
Related
Hello all,
Well stupid me decided to upgrade my Rogers branded Hermes200 (TtYN) to wm6 without knowing everything I needed to. Installed HardSPL and then the HK English rom.
Phone portion works great
After searching and reading, I found the settings for connecting to the Internet for Rogers. Great.
Tried setting up active synce and it gave me the certificate not vailid error.... installed the cert on the new rom and with the h200 hooked up via usb to the computer it syncs up with my exchange server perfectly.
When I disconnect from the PC, direct push stops working....
When I force a send/receive.... it sits at 'connecting...' for a few minutes and if I'm lucking enough to be watching, it comes back with a 'connection error' message on the status bar before it flips back to number of messages in the inbox display...
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
obiwan05 said:
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
Click to expand...
Click to collapse
I can't really comment on the others, but your H vs. 3G issue isn't an issue at all. The fact that your device shows H just means that you have access to Rogers' new Vision network (HSPDA). Cooked ROMs use an H to differentiate HSDPA (3.5 generations technology, faster) from the 3G for UMTS (3rd generation technology, fast but not the fastest). Because HSPDA is an enhancement of UMTS and is built on top of it, a lot of Windows Mobile 5 ROMS (like the stock Rogers ROM) don't differentiate the fact that it's an HSDPA connection, even though it is, and just show a generic "3G". So... rest assured, the H thing is not a bad thing.
I had the issues with my phone (bought outright from Bell, unlocked for use with Rogers)
To connect to Wifi, try the following, and report back:
1) Disconnect the WiFi entirely (as in un-check the on button)
2) Turn WiFi back on
3) When your WiFi hotspot becomes available, instead of just tapping to connect, TAP AND HOLD the name of your hotspot, and a prompt will appear asking you to connect or forget the network.
4) Click "Forget network"
5) Toggle WiFi on and off one more time
6) Once your hotspot is found, TAP AND HOLD until a prompt comes up asking you to connect.
Press connect, and voila, your wifi should be working like a charm.
My situation:
1) Bell Atrix (Build OLYLA_U4_0.37.4, Android 2.2.1 obvs)
2) Linksys WRT150N Router 2.4GHz using WPA2 Personal passcode
3) Unlocked + working on Rogers with cell unlock code.
interesting, i think i tried that with my att atrix (both stock and the leaked firmware) already, and it didnt produce any useful results. ill retry it later today, and post the new results.
I wonder why it worked for me. It can't be an issue with sims blocking access personally I think it is the router frequency causing issues.
Sent from my MB860 using XDA App
hoesntrix said:
I had the issues with my phone (bought outright from Bell, unlocked for use with Rogers)
Click to expand...
Click to collapse
I don't have any wifi issues with my unlocked Bell Atrix on Rogers. I'm using a different router though, and I also did a factory reset before power cycling and unlocking my Atrix. The Atrix also provisioned the APN settings when I unlocked the phone with my Rogers SIM in it.
It doesn't get any easier than that.
heh lucky you. well judging from the dmesg i did with wifi working and wifi not working, basically the only difference is
Code:
Link Down
Invalid ioctl data=-22
wl_iw_set_wap Invalid ioctl data=-22
Set ISCAN for wl_iw_iscan failed with -22
so im pretty sure there has to come some command from the sim/carrier that issues the -22 "command" , which than fails everything
oh and hoesntrix, i just remembered one more thing, namely:
after inserting the sim, the WiFi manager where i would have to do your steps, doesnt find any networks, or in fact it finds networks for like 1 second and than they disappear. and it cant be a router frequency issue if it works without sim after a factory restore...
im thinking some file gets changed in the /data directory/partition that gets restored with a factory wipe. since if you change things in the /system directory/partition they stay changed even after the factory restore.
my wifi was working until i restored parameters with Titanium backup from my Defy....
perhaps nothing to do with the other problem but who knows....
That would make sense. I really wish moto would not lock down the boot loader im just glad my wifi is working
Sent from my MB860 using XDA App
woah. This worked for me. Brilliant. Thanks
Works for me.......thanks a great deal
Hi... I have a Nexus 4 and I've had numerous other Android devices in the past as well.
The problem with all these devices is that they refuse to push any notifications and the wifi signal turn grey (which means the phone is not connected to the Google service servers)
but this happen ONLY on my school wifi network - whenever I turn on 3G, go home on a break or off-campus, the phone get blue signal again and sync like crazy
So this is obviously a wifi problem - not a phone problem (so please refrain from suggesting that I should flash new kernel/rom etc.)
On the other hand, my roommate iPhone still receives push notifications from Apple server. So the problem is exclusive to Android (I should say this is mobile-OS-cist)
So if anybody have any idea about what configuration on the wifi network might have led to this, I'd be more than grateful! Thank you
your need the username and pass for school network
tuan2195 said:
Hi... I have a Nexus 4 and I've had numerous other Android devices in the past as well.
The problem with all these devices is that they refuse to push any notifications and the wifi signal turn grey (which means the phone is not connected to the Google service servers)
but this happen ONLY on my school wifi network - whenever I turn on 3G, go home on a break or off-campus, the phone get blue signal again and sync like crazy
So this is obviously a wifi problem - not a phone problem (so please refrain from suggesting that I should flash new kernel/rom etc.)
On the other hand, my roommate iPhone still receives push notifications from Apple server. So the problem is exclusive to Android (I should say this is mobile-OS-cist)
So if anybody have any idea about what configuration on the wifi network might have led to this, I'd be more than grateful! Thank you
Click to expand...
Click to collapse
Usually, schools has ITS OWN NETWORK, after you connected to the AP, it doesn't mean you can use the network now. You have to login (with the username and password that school provide) using your browser. But usually the Username and pass are not allow to give to student, you should apply one form your school.
So,
Step 1 connect to AP the signal will remain grey
Step 2 login with school U&P ,
Step 3 you will see the signal turns blue(or other colour), enjoy
S3 wifi not working
(repost this to this section, adviced from xda assist)
I just purchased second-handed Samsung Galaxy SIII GT-I9300 (international ver) to replace my old Samsung Galaxy Mini (GT-S5770). I purchased this cuz the price tag on one of local stores is just too tempting me to buy one, plus, giving me free true leather phone case! (though my target was Acer Liquid Z410, but not available on local stores and i dont know how to buy online as well)
The phone conditions, well, do have some minor scratches at the sides but the previous owner was middle-age man, and im not so picky with that detail.
The phone is great, well, except, the WiFi isnt in good condition in normal uses. (means, i can still uses them. details in below)
The S3 properties,
Android 4.3
International ver, GT-I9300
16 GB ver (which i found out some cases with unbootable S3, with 16GB ver only)
unroot
all related to network setting (includes mobile network, Bluetooth network, WiFi) is in default
The problem is, the WiFi.
The phone does detects WiFi hotspots or access points from far (in fact, it can detect my neighbour's home wifi even though is quite far, well, maybe around 20-30m, well, the signal was weak though).
SInce my home wifi is hidden, i pre-set the wifi. but, it wont even connect or even detect my wifi. My Internet TV with WiFI Direct do detected though (no internet connection since it wont host internet to devices who connect to the TV)
But, when i place my S3 like below 700cm range, my S3 detects my wifi and connects like normal devices. But when it get like further than 1m, the WiFi does not receives any data at all and after a while, the WiFi disconnected.
After i bought this phone, i hard factory reset my S3 (before reset, i didnt test WiFi and also from my uncle's advice cuz my phone seems a bit slow, well, he used to have S3). I didnt had a chance to test WiFi until i got home and tried to connect my WiFi.
I've tried many method i found online, (again, the WiFi only works if i put my S3 side by side with the access point/s)
Reboot router (I always reboot them cuz the router sometimes bugging) = not working.
Forget the network in S3 and preset. = not working
Tied with static IP address (connecting to my hidden network)(with google DNS) = not working
Enabled unhidden, open wifi profile on my router, try connect. = not working)
Connect to my TV's WIFi with WPA security = not working (tried to connect but just fails)
Tried *#0011#, Wifi, turn off power saving = not working
Things i havent tried,
reset again the S3
revert to factory firmware (actually, i tried but Kies 3 just wont work at all... it said that the device cannto be initiated or similar... so, the S3 didnt do anything)
using Odin to revert to stock factory rom
using Odin to update to unofficial kitkat rom
before im going to use Odin, which i dont ever done before, do you think that reset this phone to factory setting will fix this problem?
Try changing your router's channel.
yoahmad1995 said:
Try changing your router's channel.
Click to expand...
Click to collapse
if you mean router channel, the N radio, G radio and B radio,
sorry,
mine only supports G. (or maybe B and G. but for sure, no N)(dont forget that i did tried with my tv as well, since my tv has wifi direct but also be connected with usual wpa security. by the way, im pretty sure the tv radio channel supports b, g and n, and usually, they uses N channel for devices that supports N channel).
if thats not the case, then what do you mean?
Hello everyone.
I'm have a Le Max with stock rom 19S (i dont know if it was India or CN), that i updated to stock China-20S (using the "update.zip" method), and then to China-26S from software update. I updated because of network issues on mobile.
Wifi connection works flawless, but mobile network traffic works slow / doesnt work in 3G. In 4G it works ok most of the time (even if slow) if the signal is ok.
I experimented with *#*#4636#*#* menu to do some pings, and see the connection, which goes from -60dBm nearby an antena and -110dBm far from it. The available signal types on pressing the 3dot button are "USA band" & "Band 6", without Euro tags
Used some network/traceroute tools to test the connection and got high times (like 1000ms) for some jumps, and even not jumping sometimes. One of the tools tells me that my MAC is 00:00:00:00:00:00 on the mobile interface inputs (whereas the same tool on a Huawei P8lite gives a real mac value). That's normal on Le Max 2?
Any way to improve mobile traffic on the stock roms? Should i revert to factory on 26S to remove possible old stuff from 19S/20S?
Thanks!
pahefu said:
Hello everyone.
I'm have a Le Max with stock rom 19S (i dont know if it was India or CN), that i updated to stock China-20S (using the "update.zip" method), and then to China-23S from software update. I updated because of network issues on mobile.
Wifi connection works flawless, but mobile network traffic works slow / doesnt work in 3G. In 4G it works ok most of the time (even if slow) if the signal is ok.
I experimented with *#*#4636#*#* menu to do some pings, and see the connection, which goes from -60dBm nearby an antena and -110dBm far from it. The available signal types on pressing the 3dot button are "USA band" & "Band 6", without Euro tags
Used some network/traceroute tools to test the connection and got high times (like 1000ms) for some jumps, and even not jumping sometimes. One of the tools tells me that my MAC is 00:00:00:00:00:00 on the mobile interface inputs (whereas the same tool on a Huawei P8lite gives a real mac value). That's normal on Le Max 2?
Any way to improve mobile traffic on the stock roms? Should i revert to factory on 23S to remove possible old stuff from 19S/20S?
Thanks!
Click to expand...
Click to collapse
Hello. I suggest to install TWRP. Ten flash newest stick or modem/firmware grom it.
Sent from my LEX820 using Tapatalk