Dear All,
Any idea of the effect if we use a 5V 2A charger or a 5V 1.8A ?
My Z2 came with a 5V 1.5A charger
Any inputs will be greatly appreciated.
Thanks
Either it will charge a bit faster or then it will charge just as fast as before. Depends if the charging circuit inside the phone will accept more than 1.5A.
Either way, no harm will be done.
Don MC said:
Depends if the charging circuit inside the phone will accept more than 1.5A.
Click to expand...
Click to collapse
This is exactly what I wanted to confirm actually
Thanks for your response!
Don MC said:
Either it will charge a bit faster or then it will charge just as fast as before. Depends if the charging circuit inside the phone will accept more than 1.5A.
Either way, no harm will be done.
Click to expand...
Click to collapse
Z2 supports charge upto 3A. All S801 devices do.
KyleSforza said:
Z2 supports charge upto 3A. All S801 devices do.
Click to expand...
Click to collapse
Ehh ? Then why do we have a 1.5A Charger ?
It isn't that good for the battery to charge to fast. at least for long battery life.
Haldi4803 said:
Ehh ? Then why do we have a 1.5A Charger ?
Click to expand...
Click to collapse
Costs maybe? The other Z phones come with the same charger.
Likely. It is the same charger for the Z1, Z2, tablet Z and tablet Z2...
Sendt fra Q XPERIA Z2 D6503
Does any one have the charging dock DK-36?
Can someone please post the output rating of that ?
Related
I felt that the stock Sony wall charger was not performing as rate 1500mah.
Z ultra has a 3050mah which means that the 1500mah charger will need like max 2.5hours to full charge the battery.
But mine need more tha
n that.
So i use an amperage meter to measure it and found that is just 900mah/1500mah.
I tried my S4 charger and is rated at 1300mah.
In this measurement i used the same Sony cable which is connected to my Z Ultra.
Did anyone here have this issue too??
I'm using the magnetic dock, and i'm getting everything between 800-1300mAh. It takes around 2 hours to fully charge it.
ronald_loulan said:
I felt that the stock Sony wall charger was not performing as rate 1500mah.
Z ultra has a 3050mah which means that the 1500mah charger will need like max 2.5hours to full charge the battery.
But mine need more tha
n that.
So i use an amperage meter to measure it and found that is just 900mah/1500mah.
I tried my S4 charger and is rated at 1300mah.
In this measurement i used the same Sony cable which is connected to my Z Ultra.
Did anyone here have this issue too??
Click to expand...
Click to collapse
I am using an app called battery monitor widget and I am experiencing the same thing. Normally seems to charge between 800-900 at best I have seen 1100 but never close to 1500 or so.
I am planning on getting the "quick" charger to see if something is wrong with mine.
This is using the stock cable, if I use a different usb cable (thicker even, will not even get to 500).
shaolin95 said:
I am using an app called battery monitor widget and I am experiencing the same thing. Normally seems to charge between 800-900 at best I have seen 1100 but never close to 1500 or so.
I am planning on getting the "quick" charger to see if something is wrong with mine.
This is using the stock cable, if I use a different usb cable (thicker even, will not even get to 500).
Click to expand...
Click to collapse
Or maybe my charger is faulty???
Is only 3months old...
I think its normal because it is within the usual efficiency number I got about 800-1100mah with mine on battery network widget. With samsung 2.1 amp charger i got max 1500ma.
Sent from my C6802 using xda app-developers app
hansip87 said:
I think its normal because it is within the usual efficiency number I got about 800-1100mah with mine on battery network widget. With samsung 2.1 amp charger i got max 1500ma.
Sent from my C6802 using xda app-developers app
Click to expand...
Click to collapse
Sounds like Sony is controlling the charge input...
But slow charge is good for battery..
Especially non removable 1...
Hey guys, i just wanted to know if my Z2 (D6503) have the qualcomm's quick charge 2.0, but ofcourse it hase it since it is sd801 packed, but is it enabled in the stock rom? Or maybe stock-based like existenz.
Because im planning to buy the motorola turbo charger.
http://www.motorola.com/us/accessor...Turbo-Charger/motorola-turbo-charger-pdp.html
And also, if anybody knows any other charger that is packed by quick charge 2.0, and cheaper price
Not enabled, its disabled for safety because under testing with it enabled the device became very hot
I'm planning to get a 9V 2.5A DC power supply and find out.
V4LKyR said:
I'm planning to get a 9V 2.5A DC power supply and find out.
Click to expand...
Click to collapse
Whitepaper for Z2 says Upto 3A is safe
Up to how many Volts though?
V4LKyR said:
Up to how many Volts though?
Click to expand...
Click to collapse
Typical usb voltage 5V
V5
3A
Its what i saw on another thread where a few users were using such a thing
Envious_Data said:
Typical usb voltage 5V
V5
3A
Its what i saw on another thread where a few users were using such a thing
Click to expand...
Click to collapse
It must handle 9V 3A too
V4LKyR said:
It must handle 9V 3A too
Click to expand...
Click to collapse
9V may be too much
Maximum and typical avarage USB cable voltage is 4.9V... 5V basicly
Thanks
Hello,
Did anyone tried this new chargers ?
Where can i buy worldwide shipping ? can't find anywhere :/
thanks
cables
I'm planning to buy a quick charger for my Z3. Maybe i'll buy this one. I just want to know, what cable should i use? or will the default cable of the Z3 would enable quick charge? Here is the charger i'm planning to buy. Is quick charge cable dependent as well? can't find any post about the cables.
http://www.pure-gear.com/extreme-usb-wall-charger-849.html
I thought it was a Quickcharger (EP880), the one that came with the phone.
It is EP881.
If you buy a EP881, they give you a EP880 power adapter(this already comes with the phone) and a different looking usb cable. so i would say if you buy a z3 you already have a quick charger. someone in the z3 compact forums confirms this here: http://forum.xda-developers.com/z3-compact/accessories/magnetic-dock-quick-charger-t2926784
also if you google EP881 you can see multiple images of the EP880 power adapter.
i hope this clears up any confusion
EP880 is not a Qualcomm Quick Charge 2.0 charger
FYI, just received a Qualcomm Quick charge 2.0 compatible charger and the Z3 definitely takes advantage of it. I have the Tenergy Turbo charger and the light is blue for normal charging and green for Quick charge 2.0. The only downside is it doesn't seem to work using the magnetic charging port, only directly into USB.
Roughly how fast do you get a full charge?
I read that with 2.0 it rapid charges to ~65% and then normal rate.
abhinav.tella said:
Roughly how fast do you get a full charge?
I read that with 2.0 it rapid charges to ~65% and then normal rate.
Click to expand...
Click to collapse
Not sure since I only had it on for a little while testing today. No I don't feel like running down my battery and testing it, it takes to long to run down the battery
It absolutely, definitely charges at QC 2.0 speeds though, but only via the USB directly into the phone, not through the magnetic charger.
se1000 said:
Not sure since I only had it on for a little while testing today. No I don't feel like running down my battery and testing it, it takes to long to run down the battery
It absolutely, definitely charges at QC 2.0 speeds though, but only via the USB directly into the phone, not through the magnetic charger.
Click to expand...
Click to collapse
True, but if you do manage reach absolute zero, and recharge, do tell us.
se1000 said:
EP880 is not a Qualcomm Quick Charge 2.0 charger
Click to expand...
Click to collapse
proof? sony seem to think they are considering when you buy EP881 you buy is actually a combination of EP880 and a usb cable.
did you buy an EP881? if so what model number is on the brick?
also read here direct from sony second and fifth post's down http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/needed-help-with-charger-for-xperia-z/td-p/373667
henson0115 said:
proof? sony seem to think they are considering when you buy EP881 you buy is actually a combination of EP880 and a usb cable.
did you buy an EP881? if so what model number is on the brick?
also read here direct from sony second and fifth post's down http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/needed-help-with-charger-for-xperia-z/td-p/373667
Click to expand...
Click to collapse
they are "quick charge" but not Qualcomm Quick Charge 2.0 spec. Maximum output for the EP880 is 5v 1500mA. Quick Charge 2.0 charges at 5v 2000mA (2A) or 9v 2A, or 12v 1.5A
se1000 said:
they are "quick charge" but not Qualcomm Quick Charge 2.0 spec. Maximum output for the EP880 is 5v 1500mA. Quick Charge 2.0 charges at 5v 2000mA (2A) or 9v 2A, or 12v 1.5A
Click to expand...
Click to collapse
ah ok that now makes sense, Sony should make this clear. it is already hard enough to find information about all of this.
Guys,
Charger provided with my Sony Xperia z3 got short circuit (burning smell from the head piece) on the 1st charge itself. It was replaced in the sony service center. The issue is, the output the replaced charger was 5V-1500mAH. I forgot the output rating the charger provided in the box. Please confirm the output rating by the pic. Based on your inputs, I will raise a request to my retailer to provide. Please find the rating of the replaced charger.
Yes mine is 1500 as well out of the box. Sorry your pic don't load. Can you tell me model number of your charger?
Sent from my D6633 using XDA Free mobile app
Now i see it. Yes it's 1500ma and your charger is ep880
infinitylook said:
Yes mine is 1500 as well out of the box. Sorry your pic don't load. Can you tell me model number of your charger?
Sent from my D6633 using XDA Free mobile app
Now i see it. Yes it's 1500ma and your charger is ep880
Click to expand...
Click to collapse
If my memory stands correct, box version of the charger rating was mentioned as 3000mAh or 2000mAH. I might have misread it in the frenzy of getting Z3 and I am the 1st buyer in Chennai, atleast that's wat the retailer told me.
I forgot to take a snapshot at tat time. My USB cable version is EC803 and Charger (provided by service center) is EP880. I have searched throughout the internet and no where the output rating of Z3 box version of charger was mentioned.
Are u sure that the box version of Sony Xperia Z3 (D6653 LTE) has the same output rating of 1500mAH. Thanks in advance.
ananthakannan said:
If my memory stands correct, box version of the charger rating was mentioned as 3000mAh or 2000mAH. I might have misread it in the frenzy of getting Z3 and I am the 1st buyer in Chennai, atleast that's wat the retailer told me.
I forgot to take a snapshot at tat time. My USB cable version is EC803 and Charger (provided by service center) is EP880. I have searched throughout the internet and no where the output rating of Z3 box version of charger was mentioned.
Are u sure that the box version of Sony Xperia Z3 (D6653 LTE) has the same output rating of 1500mAH. Thanks in advance.
Click to expand...
Click to collapse
Definitely 1500mAh
I really wish Sony would have included a quick charger in the box....
I am disappointed that the quick charge is not working with the magnetic charging port... did you try using the adapter or the usb cable when you tested if it charged faster with the magnetic port?
jaoropez said:
I am disappointed that the quick charge is not working with the magnetic charging port... did you try using the adapter or the usb cable when you tested if it charged faster with the magnetic port?
Click to expand...
Click to collapse
"quick charge" or charging at 5v 2A (2000mA) works through the magnetic charging port. This is still very fast.
Qualcomm Quick Charge 2.0, which charges at 9v 2A does not work through the magnetic port, which is not a surprise to me.
Hello everyone I found in aliexpress.com a charger with QC 2.0 technology at a great price and demonstrates all requirements have to be able to charge our equipment in a quickly and efficiently way.
Tell me what you think and if any of you can try out the charger.
Search: "globel universal charger DC 24W MAX 2A quick charge 2.0 4 usb port wall charger changeable plug for mobile phone" only US $ 16.00 / item
Best Regard's
you mean this one?
http://www.aliexpress.com/item/glob...e-2-0-4-usb-port-wall-charger/2018464264.html
You already got it ?
Do not bother with quick charge 2.00, although snapdragon 801 support it I don't think our z2 software has that enabled.
Why I am saying that is because the maximum charging current the z2 draws is 1.50 amps (measuring it with one of these)
I've tried different chargers (oneplus charger, anker charger which both capable of 2 amps) and different cables and always the max is 1.50
@Super Prince
Read here: https://www.qualcomm.com/products/snapdragon/smartphones/sony-xperia-z2
Haldi4803 said:
@Super Prince
Read here: https://www.qualcomm.com/products/snapdragon/smartphones/sony-xperia-z2
Click to expand...
Click to collapse
Yes, I know about that already and I mentioned that in my comment. But as I said the z2 maxes out at 1.5 amps I think because of software limit.
I really hope this QC 2.00 get working in the z2 because it takes a lot of time to charge this phone fully.
Sent from my D6503 using Tapatalk
Super Prince said:
Yes, I know about that already and I mentioned that in my comment. But as I said the z2 maxes out at 1.5 amps I think because of software limit.
I really hope this QC 2.00 get working in the z2 because it takes a lot of time to charge this phone fully.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Is that on a dead battery? Current flow will settle down as the battery reaches more charge for safety.
I use a 1A charger from my old HTC phone with the dock at night, but it doesn't feel to me like my Sony wall charger is any faster. In fact, it feels slower. The quickest charges I got were actually through my desktop, my motherboard has a charging feature on the USB 3.0 ports.
Super Prince said:
Yes, I know about that already and I mentioned that in my comment.
Click to expand...
Click to collapse
Ah sorry, guess I read wrong.
But as Sony and Qualcomm say the Z2 is QuickCharge compatible I think it should be working.
You can't see more than 1.5A because you do not have a QuickCharge 2.0 charger! And even if you would and then plug this USB anpereMeter in between it might block the data transfer making the phone think it is connected to a standard USB port.
I'm not even sure if QuickCharge 2.0 CAN draw more than 1.5A! We only know that it allows up to 9V or 12V.
There are 3A or 4A 9V chargers around. But I don't know how much the phone would want to get.
BTW. With Doomkernel and FastCharge enabled you should be able to demand more than 1.5A... I think up to 2A was available in FauxApp
But I think I failed when I tried. Not sure anymore... ^^ been a while.
Hello I wonder if I can use this charger on my phone without poblemas ? because the original charger takes many thanks AUKEY QUICK CHARGER 4V/9V/12V
mateus98 said:
Hello I wonder if I can use this charger on my phone without poblemas ? because the original charger takes many thanks AUKEY QUICK CHARGER 4V/9V/12V
Click to expand...
Click to collapse
https://www.google.com.br/search?q=...hVJNT4KHRpeB3wQ_AUIBygC#imgrc=4MnHmNgV1AUqQM:
The C5 Ultra doesn't support quick charge. I'm pretty sure it'll work, but only on 5V, no faster than normal charger.
jetstreamblue said:
the c5 ultra doesn't support quick charge. I'm pretty sure it'll work, but only on 5v, no faster than normal charger.
Click to expand...
Click to collapse
can i use fearless ?