As above really!!
Is anyone one having issues with buttons been pressed whilst you are on the phone?
I have had mine cut out a few times and all sorts!!
stu_tls said:
As above really!!
Is anyone one having issues with buttons been pressed whilst you are on the phone?
I have had mine cut out a few times and all sorts!!
Click to expand...
Click to collapse
Are you saying the vibrations stop working all together?
Sent from my D6503 using XDA Premium 4 mobile app
I never mentioned vibrations!!!
I should have explained it a little better though
when you make or receive a call and you are on the phone the screen turns off and disables all button presses because the proximity sensor is covered
but even though the display is off and the sensor is covered you can still press buttons whilst on the phone
so far I have tried sending a text
cut people off
muted the phone
put the phone in to airplane mode
added events to my calendar
and more
all this with the side of my face while in a call
stu_tls said:
I never mentioned vibrations!!!
I should have explained it a little better though
when you make or receive a call and you are on the phone the screen turns off and disables all button presses because the proximity sensor is covered
but even though the display is off and the sensor is covered you can still press buttons whilst on the phone
so far I have tried sending a text
cut people off
muted the phone
put the phone in to airplane mode
added events to my calendar
and more
all this with the side of my face while in a call
Click to expand...
Click to collapse
Thats odd, what firmware are you on
This feature should usualy disable screen touch
Sent from my D6503 using XDA Premium 4 mobile app
on .55 at the min
there is a few with the same problem over on the sonymobile forum
I was wondering if the double tap to wake feature was causing the issue so I have just turned that off and see how it goes over the next few days
stu_tls said:
on .55 at the min
there is a few with the same problem over on the sonymobile forum
I was wondering if the double tap to wake feature was causing the issue so I have just turned that off and see how it goes over the next few days
Click to expand...
Click to collapse
Experiment with some posible things
Perhaps even try to update to a new firmware
Sent from my D6503 using XDA Premium 4 mobile app
I will see what its like with the update once its available I'm not going root!!
Yes have this issue once, when in a call, tone of number presses even though screen off.
Sent from my D6503 using Tapatalk
Happens to me too
For me it's sounds like Proximity sensor of Your Xperia Z2 isn't working. You can test it with apps, https://play.google.com/store/apps/details?id=imoblife.androidsensorbox&hl=ja like this
Proximity sensor works fine the first thing I did was test it
Well.... I can't think about any other reason.... As soon as I find infos I will share
Sent from my D6503 using XDA Free mobile app
I haven't had it happen since disabling the double tap to wake feature
i don't have double tap enabled and i have the same issue :S
I have tried it with and without double tap to wake and it makes no difference! It's really annoying me now!
stu_tls said:
on .55 at the min
there is a few with the same problem over on the sonymobile forum
I was wondering if the double tap to wake feature was causing the issue so I have just turned that off and see how it goes over the next few days
Click to expand...
Click to collapse
I have the same annoying fault. I can not find double tap to wake feature tu disable on XA2. How did You find it ?
Related
Hi I'm currently running the 6.1.3 cytogen modwith tweaks nd have run into an issue.
While talking to someone first off the sensor history sensitive I believe cause the screen is constantly turning on and off. This leads to a problem cause the mute button is in the upper corner right where my ear touches.
Needless to say as much as I enjoy my own voice its counterproductive when I accidentally put ppl on hold.
Is there some way to fix this. Either through adjusting the sensor settings or some how moving/removing the hold button
Sent from my X10i using XDA App
same problem thought it was my big ears!
Same thing happens with MIUI too
(and I am fairly certain that my ears are small!! )
I think it has to do with how custom ROMS handle the sensor. They are over-sensitive!
supercharge1 said:
Hi I'm currently running the 6.1.3 cytogen modwith tweaks nd have run into an issue.
While talking to someone first off the sensor history sensitive I believe cause the screen is constantly turning on and off. This leads to a problem cause the mute button is in the upper corner right where my ear touches.
Needless to say as much as I enjoy my own voice its counterproductive when I accidentally put ppl on hold.
Is there some way to fix this. Either through adjusting the sensor settings or some how moving/removing the hold button
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I believe I have a solution. Go to settings, call settings, and tick "always use proximity". Click thanks if I helped!
Sent from my X10i using XDA App
ill give it a go
Guys, im the developer of Power Switch, an app that switches off your tablet's screen when you shut the case.
The main thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1277712
Ive had reports of problems with the tab's light sensor, so would appreciate some debugging feedback.
You can use the lite version to test, it has all the features, but just wont save as much juice.
Thanks in advance. Feel free to reply here or in the main thread, i read both regularly!
Many thanks!, Looks very interesting, will try it out and see how it does with my Tab.
Let me know if the light sensor work properly please!
Got Pro version on my phone, works great.
Will try it on my tab soon.
I'll check it out when i get home.
Works great on my tab too. Thanks mate.
Edit: I noticed on my phone after testing it on and off a few times, the light sensor stopped working. But after rebooting, I havent seen the problem since.
And I've yet to see a problem on my tab.
So the light sensor works? Can you log some sensitivity settings for me so i can fine tune it...
ftgg99 said:
So the light sensor works? Can you log some sensitivity settings for me so i can fine tune it...
Click to expand...
Click to collapse
Like in different lighting settings? Like dimming the lights in the room? Or using different Sensitivity %s and closing the case?
Or all of the above?
Oh and after some extensive use on my DroidX, I've been having some problems. It turns off while I'm using the phone even in very lighted surroundings.
---------- Post added at 09:38 AM ---------- Previous post was at 09:20 AM ----------
I'm at work right now but I tried a few things.
I'm using a Belkin Folio case and i tested to see how low i could set the % for it to read when the case was closed.
Anything under 10% didn't work (even when i completely covered the light sensor with my finger)
On 100%, even a shadow over the sensor would trigger it.
I'll try a few different lighting instances when I get home.
Thats cool, thanks!
ftgg99 said:
Thats cool, thanks!
Click to expand...
Click to collapse
Sure thing, bud.
Still having issues with it on my DroidX. I've been trying different things but I dont think its user error.
You should be using the proximity sensor, not the light sensor for the phone!
ftgg99 said:
You should be using the proximity sensor, not the light sensor for the phone!
Click to expand...
Click to collapse
Oh well okay haha.
Its much more efficient...
Actually...to be honest, I dont even need it on my phone because its a habit of mine to hit the power button as im setting it down or putting it in my pocket.
I do love it on my tab though. Makes it easier just being able to close my case instead of trying to find the power button lol.
Can't remove this app from my tab! Help please
Sent from my GT-P7500 using xda premium
Disable admin permissions or click the uninstall button. Man, som people...
ftgg99 said:
Disable admin permissions or click the uninstall button. Man, som people...
Click to expand...
Click to collapse
Haha I know right...Don't see why he would want to uninstall it tho
The best ones are the Oles that leave market reviews claiming its "some kind of scam"...
Could you help me how to configure it n make it work? Mine seem not work. Duno how. Im using pro
Sent from my GT-P7500 using XDA Premium App
joseph168 said:
Could you help me how to configure it n make it work? Mine seem not work. Duno how. Im using pro
Sent from my GT-P7500 using XDA Premium App
Click to expand...
Click to collapse
Do you have "Enable Power Switch" Checked?
EDIT: If you're using a tablet with a case that covers the screen when you close it, here's what you need...
1. Check "Enable Power Switch"
2. Check "Admin Permissions" (this gives the app permission to lock your screen or turn the tablet off)
3. Check "Enable Sensors"
4. Check "Use Light Sensors" (I recommend 10-20% Sensitivity)
5. Set up your Confirmation and Activation Delay.
---Activation Delay is how long it takes for the device to read if the case is closed or not. (If you set it to 0 seconds, your screen will cut off even if you simply brush something up against the light sensor on accident) I keep mine at 3 seconds.
---Confirmation Delay starts after you Activation Delay ends. It is a confirmation dialogue box that asks what you want to do. Once the timer for it runs out, it will lock your screen/turn the screen off. (I keep mine at 3 seconds for this as well but you might want it longer)
To recap...Set Activation Delay for how long you want the device to wait before it makes a decision if it should turn off your screen or not. Set Confirmation Delay for how long you want it to wait after the Activation Delay ends to actually turn off the screen.
((If you don't have a case that covers the screen and you want it to turn off when you put your tab upside down, replace step 3 with *Check "Acceleration Sensor"* And make sure you Uncheck "Use Light Sensor"))
I'm Using My Xperia S Quite A Long, This Is My First Android Phone So Far!:cyclops:
Now Straight Coming To The Problem:silly:
In Market, There Seems To Be So Many Cool Apps Dealing With The Proximity Sensor Like:
1>Proximity Screen Off
2>Wave Control
etc
Well It Seems There Is No Problem Installing It, Or Crash (or force Close)
BUT
On These Application Gesture Function Nothing Seems To Work EXCEPT The 'COVER & HOLD' Mode
[e.g: say I Set 'Swipe Once' To Turn Off The Screen And 'Swipe Once' To Turn On The Screen...NO NOTHING WORKS!:crying:
Now Put 'Cover & Hold' To Both Turn On And Off The Screen Just As Before (in different gesture)...Works Like A Charm:laugh:]
Same Case Happens In Wave Control ('Default Pause Or Play' On 'Cover & Hold' Works, But 'Next Song' On 'Swipe Once' Doesn't Work:crying:
I've Even Uploaded A Video (SORRY FOR LOW QUALITY with Nokia X6 :silly Showing The Problem In 'Proximity Screen Off' App
http://www.youtube.com/watch?v=7CVFaV2QeIk
If Anyone Is Having The Same Problem Please Post It Down And Of Course The Solutions Are MOST WELCOME
AnYoNe!!??
Proximity Screen Off didn't work too well with my Xperia S...it had a problem with immediately switching the screen right back on after it triggered a screen off. I'm using Smart Screen Off myself, which I think is the best one of these sensor on/off apps I've seen yet. It has a lot of options and seems to have a better calibration for your proximity sensor and gyroscope. Not only can you trigger your screen on and off with the proximity sensor, but you can also shake the phone to turn the screen on/off, and flip it over to turn the screen off. I'm using a hand wave to turn the screen on, combined with a screen off widget and the flip over motion for turning the screen off, and it works great.
I do wish somebody could make an app like PGM Nexus for Xperias, that is an amazing app that's sadly for the Galaxy Nexus only. You can turn on your screen by just swiping left to right on the screen, or double tapping on it with that app. Swiping right to left at the screen bottom turns the screen back off.
Elsydeon said:
Proximity Screen Off didn't work too well with my Xperia S...it had a problem with immediately switching the screen right back on after it triggered a screen off. I'm using Smart Screen Off myself, which I think is the best one of these sensor on/off apps I've seen yet. It has a lot of options and seems to have a better calibration for your proximity sensor and gyroscope. Not only can you trigger your screen on and off with the proximity sensor, but you can also shake the phone to turn the screen on/off, and flip it over to turn the screen off. I'm using a hand wave to turn the screen on, combined with a screen off widget and the flip over motion for turning the screen off, and it works great.
I do wish somebody could make an app like PGM Nexus for Xperias, that is an amazing app that's sadly for the Galaxy Nexus only. You can turn on your screen by just swiping left to right on the screen, or double tapping on it with that app. Swiping right to left at the screen bottom turns the screen back off.
Click to expand...
Click to collapse
Thank You Very Much For Your Help! I'll Definitely Use The Mentioned App. But Have You Tried Wave Control? I'm Also facing the Same Problem With It!
Actually I Thought My Xperia S Is Defective One:crying:
And I think I've the Solution For Your Problem (immediately switching the screen right back on after it triggered a screen off)
Turn Off the Slide Unlock To None!___:good:
Wave controller not working in my xps also........
Sent from my LT26i using xda premium
zyclops1 said:
Wave controller not working in my xps also........
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Only Cover And Hold Work, Isn't It!:silly:
Proximity screen off pro works fine for me on the S. Swipe with one or two fingers.
Sent from my LT26i using xda premium
i have a xperia p on ics and the wave control app is working fine for me
Crocodile1973 said:
Proximity screen off pro works fine for me on the S. Swipe with one or two fingers.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Am I Doing Something Wrong? I Don't Think My Phone Is Defective, Coz The Hold & Cover Works Like Charm!! Any Idea??:silly::silly:
I'm Non-Rooted Though, If It Has Anything To Do With!
Anyone Else?
Anime13 said:
Am I Doing Something Wrong? I Don't Think My Phone Is Defective, Coz The Hold & Cover Works Like Charm!! Any Idea??:silly::silly:
I'm Non-Rooted Though, If It Has Anything To Do With!
Click to expand...
Click to collapse
Using 5.0.1 pick one or two finger, make sure start service. All I did. Run finger over sensor and it comes on. Two finger swipe turns off
Sent from my LT26i using xda premium
Yes i know this bug.
It's just because the proximity sensor is to slow.
And don't worry, it's a software bug.
To fix it, go to system/etc/hw.conf
You will see 'proximity sensor configuration"
CHange values
dev=/sys/bus/i2c/devices/3-0054/
val_cycle=1
val_nburst=1
val_freq=5
val_threshold=1
val_filter=1
Click to expand...
Click to collapse
Reboot and enjoy your applications
seburton said:
Yes i know this bug.
It's just because the proximity sensor is to slow.
And don't worry, it's a software bug.
To fix it, go to system/etc/hw.conf
You will see 'proximity sensor configuration"
CHange values
Reboot and enjoy your applications
Click to expand...
Click to collapse
Thank You Very Much , I'm A Little Noob At Thses Stuff So Does this Process Require Root?
Partially Solved
Anime13 said:
Thank You Very Much , I'm A Little Noob At Thses Stuff So Does this Process Require Root?
Click to expand...
Click to collapse
Yes, every changes.in system partition requires root
Sent from my LT26i using xda app-developers app
Hi guys. I wonder if there is an option to stop the wake-up movement recognition. In the night I am flash by my watch lol. Any ideas?
jafar16 said:
Hi guys. I wonder if there is an option to stop the wake-up movement recognition. In the night I am flash by my watch lol. Any ideas?
Click to expand...
Click to collapse
So you sleep with your watch on? Just curious. I have no answer to you problem though, sorry.
No my screen is off but it pass on cause of gesture.
Mute the phone (pull down and hold).
Sent from my unknown using XDA Premium 4 mobile app
jimbobtexas said:
Mute the phone (pull down and hold).
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That won't help with the gesture activation.
spiderflash said:
That won't help with the gesture activation.
Click to expand...
Click to collapse
I'm assuming he/she meant mute / DND the watch by pulling down from the 'home screen'. If so, yes. It will help with the gesture activation.
When I do it, the screen doesn't light up when at 45ยบ.
Like so: link
Thank you for the solution but I use the watch to wake me up by vibration at the morning. So mute it not help me . It would be better if we have an option in the firmware to switch on or off the movement wrist detection.
I have the opposite problem, I can't get my lg watch to wake up by moving it, I've tried different movements and nothing, the screen is set to be always on but the only way to wake it up from its dimmed state is to tap the screen.
DanSeb said:
I have the opposite problem, I can't get my lg watch to wake up by moving it, I've tried different movements and nothing, the screen is set to be always on but the only way to wake it up from its dimmed state is to tap the screen.
Click to expand...
Click to collapse
If really nothing works and the watch is not muted you probably have a defect. Especially if this was the case from the moment on when you got it. Request a replacement from where you bought it.
jafar16 said:
Thank you for the solution but I use the watch to wake me up by vibration at the morning. So mute it not help me . It would be better if we have an option in the firmware to switch on or off the movement wrist detection.
Click to expand...
Click to collapse
Try https://play.google.com/store/apps/details?id=com.procoit.wearmylauncher and activate the shower mode. It still vibrates but the screen is dimmed and won't turn on if you accidently touch it or move your wrist.
Godd idea, i will try.
Is there any way to make the fingerprint scanner with the screen off ?? I know in iphones they have a mod in cydia to do it.... Is it possible to get the same thing here ?
gdmlaz said:
Is there any way to make the fingerprint scanner with the screen off ?? I know in iphones they have a mod in cydia to do it.... Is it possible to get the same thing here ?
Click to expand...
Click to collapse
Why on earth would you want that ?
And if it's possible, I guess it will drain your battery faster...
speedme said:
Why on earth would you want that ?
And if it's possible, I guess it will drain your battery faster...
Click to expand...
Click to collapse
when you swipe it unlocks, No need to turn the screen on, Works fine on iphones my gf has hers rooted and works perfectly
gdmlaz said:
when you swipe it unlocks, No need to turn the screen on, Works fine on iphones my gf has hers rooted and works perfectly
Click to expand...
Click to collapse
As said, if it would be possible...the battery will drain a lot faster as the screen will always be active/the system will perform wakelocks all the time.
But it's a good idea
Sent from my SM-G900F using XDA Premium 4 mobile app
speedme said:
As said, if it would be possible...the battery will drain a lot faster as the screen will always be active/the system will perform wakelocks all the time.
Click to expand...
Click to collapse
That's what was generally said about double tap to wake, yet the phones that have this implemented, don't have drastically increased battery consumption because of it.
On the other hand, Samsungs half second delay after pressing home button, to wake after deep sleep (formerly just a "feature" of exynos devices, now with snapdragons as well) , is extremely annoying.
Don't see how would the screen always be active? Rather, the fingerprint sensor would be.
Sent from my SM-G900W8
Idan73 said:
That's what was generally said about double tap to wake, yet the phones that have this implemented, don't have drastically increased battery consumption because of it.
On the other hand, Samsungs half second delay after pressing home button, to wake after deep sleep (formerly just a "feature" of exynos devices, now with snapdragons as well) , is extremely annoying.
Don't see how would the screen always be active? Rather, the fingerprint sensor would be.
Sent from my SM-G900W8
Click to expand...
Click to collapse
That's what I was thinking if iphones are doing it without any problem and lg is using their knock why can't samsung
I don't believe battery drain would be an issue, but how would you keep the phone in a state to be read?
With double tap to wake and swipe to wake surely the waiting for action state is already developed.
Other possibility could be pressing the home button and sweeping the fi gerprint scanner at the same time to unlock in one motion.
sent from SGS5 running NeatRom 0X1
Up up up
Sent from my SM-G900T using Tapatalk
Prof Peach said:
Other possibility could be pressing the home button and sweeping the fi gerprint scanner at the same time to unlock in one motion.
sent from SGS5 running NeatRom 0X1
Click to expand...
Click to collapse
This is already working.. I scanned 3 times the same finger, and now working like this..
sosimple said:
This is already working.. I scanned 3 times the same finger, and now working like this..
Click to expand...
Click to collapse
if the screen is off the fingerprint won't unlock and turn the screen off at the moment...... you have to press the home key wait for screen to turn on then swipe
Prof Peach said:
With double tap to wake and swipe to wake surely the waiting for action state is already developed.
Other possibility could be pressing the home button and sweeping the fi gerprint scanner at the same time to unlock in one motion.
sent from SGS5 running NeatRom 0X1
Click to expand...
Click to collapse
gdmlaz said:
if the screen is off the fingerprint won't unlock and turn the screen off at the moment...... you have to press the home key wait for screen to turn on then swipe
Click to expand...
Click to collapse
I know. I talk about press (so the screen turns on) AND sweeping the finger at the same time.. This is working for me. I have to do a longer sweepe though.. And i have used all 3 finger setting to the same finger, probably a bit different portion of the finger every time..
Try it.. It works for me. Always unlock with one sweeping and pressing at the same time..
The disadvantage, i can unlock only with one finger.
The problem for me is that i have the home button to wake switched off using wanam exposed module. The phone was active in pocket way too many times.
sent from my Galaxy S5 running NeatRom v2.3