Hi there,
After upgrading Galaxy Mega to I9200XXUDNE4 phone is not connecting to PC anymore, no sign on device manager, no charging. But in download mode its connects as Samsung USB modem driver. Before update all was working well. I just download the firmware from sammobile.com and flashed with odin and phone become like this.
Any help ????
nasirahmed said:
Hi there,
After upgrading Galaxy Mega to I9200XXUDNE4 phone is not connecting to PC anymore, no sign on device manager, no charging. But in download mode its connects as Samsung USB modem driver. Before update all was working well. I just download the firmware from sammobile.com and flashed with odin and phone become like this.
Any help ????
Click to expand...
Click to collapse
I would try re-flashing the rom and see how it is after that.
its same......
Did you do all the pre quisite preparations like turn on USB Debugging and tick the specific boxes on Odin? If yes, try to re download the firmware and flash again. Only flash the .tar file.
Sent from my GT-I9200 using Tapatalk
Related
Hey, my Samsung Galaxy S2 with KE7 does not get recognised by my laptop in download mode.
It's on stock firmware and unrooted.
Tried everything and looked across the internet but couldn't find any solution.
Could anyone help me please?
Kies installed
and not running in task bar when connected with Odin in download mode .
Have you followed the instructions .
Open Odin load firmware
Boot phone to download mode
Follow on screen instructions Vol Up
Connect Samsung USB cable
Odin and phone should now connect .
jje
hi all,
I'm after the flash driver for i9100 for use with odin and other flash programs.
At the momment it comes up as unknown device, when in download mode.
I've checked all over google and current download says over 12hrs so if anyone knows a quick link please help.
Download Kies. It'll install the drivers needed.
http://www.samsung.com/uk/support/usefulsoftware/KIES/JSP
i360* said:
Download Kies. It'll install the drivers needed.
Click to expand...
Click to collapse
tried that, when it's in normal mode it gets reconised but as soon as i put it in download mode / flash mode, it says device unknown
Connect phone to KIES let KIES find phone .
Turn off phone and PC
Reboot and put phone in USB mass storage mode and connect with USB cable let PC find and install drivers .
Flashing turn KIES OFF
Open ODIN load required file in correct section
Put phone to download mode and read the instructions on the first download window .
Connect Samsung USB cable to a mainboard USB port .
You should now have yellow block showing in ODIN .
jje
thanks managed get ics up n running at last
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.
Hi,
I was trying to remove any trace that my Samsung i9300 phone had ever been rooted but in the process I forgot to re enable the USB Debugging mode so consequently now I am locked in the download mode & if I try to reboot, the phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."! So as you can hopefully appreciate I am a little peed off with myself & for the life of me I cannot see away out of it so is there anyone out there please who can shine a bit of life on my troubled phone & please do not forget that the USB Debugging is NOT enabled.....
Kind regards with thanks
Phil
UPDATE
I have now tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
flash a stock rom through odin.
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
PHILnFINGERS said:
Hi,
I was trying to remove any trace that my Samsung i9300 phone had ever been rooted but in the process I forgot to re enable the USB Debugging mode so consequently now I am locked in the download mode & if I try to reboot, the phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."! So as you can hopefully appreciate I am a little peed off with myself & for the life of me I cannot see away out of it so is there anyone out there please who can shine a bit of life on my troubled phone & please do not forget that the USB Debugging is NOT enabled please.....
Kind regards with thanks
Phil
Click to expand...
Click to collapse
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Phone is still dead after flashing with CF-Root-SGS3-v6.4
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
sriram231092 said:
flash a stock rom through odin.
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
Click to expand...
Click to collapse
Phone is still dead after flashing with CF-Root-SGS3-v6.4
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
saywhatt said:
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Click to expand...
Click to collapse
PHILnFINGERS said:
I have tried flashing CF-Root-SGS3-v6.4 with Odin3 v1.85, but whilst the phone appears to be making a full recovery & Odin confirms a successful flashing it stops on the black Samsung welcome screen with an exclamation mark to the top left hand corner to the screen, so could anyone advise me what my next step should be please?
Click to expand...
Click to collapse
when you flashed the ROM, did you unplug the USB connector?
sounds like you bricked your S3 mate
You said that you flashed CF-root?
CF-root flashes recovery and kernel for root access.
Download a full stock rom from sammobile and flash it :good:
USB Debugging has no affect on download mode... :facepalm:
Upon Odin confirming that it was successful it was then & only then did I unplug the USB cable
saywhatt said:
when you flashed the ROM, did you unplug the USB connector?
sounds like you bricked your S3 mate
Click to expand...
Click to collapse
Given that Odin confirmed that it was successful after the flashing the the latest UK firmware from Sammobile I then unplugged the USB cable, but I then found that the phone hadn't actually finished & instead it stopped on the black Samsung welcome screen & it won't budge from that. This may or may not be the reason for this, but I feel that I may have forgot to enable the USB DEBUGGING, so would this cause the phone not to boot correctly?
As I am unable to boot the phone, I am also unable to enable the USB DEBUGGING, so is there anything that I can do to resolve these issues please?
saywhatt said:
You have to have
*Odin
*USB Cable
*PC/Laptop
1 Download a ROM in sammobile.com
2 unzip the file
3 you will find a .tar file, now put it on the PDA section in Odin
4 Put phone on Download Mode
5 connect phone to pc/laptop
6 Odin will recognize your phone
7 click start
8 phone will reboot by itself
Click to expand...
Click to collapse
You say that the USB Debugging has not effect on download mode so why do other users/developers stress that it needs to be enabled?
b-eock said:
USB Debugging has no affect on download mode... :facepalm:
Click to expand...
Click to collapse
PHILnFINGERS said:
You say that the USB Debugging has not effect on download mode so why do other users/developers stress that it needs to be enabled?
Click to expand...
Click to collapse
It only matters when your actually booted into a Rom.. and your not even close to that part yet..
Sent from my HTC One XL using xda premium
USB Debugging has no affect on download mode - INVALID Statement
b-eock said:
USB Debugging has no affect on download mode... :facepalm:
Click to expand...
Click to collapse
I have a same problem with OP.
After entered to recovery mode and wiped/cleared cache, I didn't boot the phone, just continue to download mode.
It's mean USB Debugging is not enable after recovery. Now my phone can't boot also can't charge just appear msg:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Recovery via Kies can't be done because my phone have a problem IMEI=unknown and Baseband=unknown before this happen, so Kies can't recognise the phone. If IMEI is valid and Kies can connect the phone, the problem can be resolved by Kies.
I hope someone here have a good solution how to resolve the problem that ODIN can't reflash the phone because 'USB Debugging' is not enabled in the first place.
HP: Samsung Galaxy i9100 JB 4.1.2
my pc cannot detect my phone
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Solution!
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
dear friend already tried to set up a stock deodex via recovery? it avoids using Odin and will be able to install the drivers on your laptop with your connected device!
:good:
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Just remove your phone battery ,sim etc . then wait for few seconds and boot to recovery or download mode by only battery not with sim and sd try if this works
This happened with me then solved by this method
akky26 said:
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Click to expand...
Click to collapse
Your link doesnt work. And after connecting whats next?
Stiffymeister said:
Your link doesnt work. And after connecting whats next?
Click to expand...
Click to collapse
After connecting select pda and put desired rom file. And start flying