Hi,
anybody had an issue when MFT wont recognize K900?
I have:
- installed drivers
- loaded ROM into MFT
- turned off K900
- connected it
[nothing happened]
- pressed power ON for 1 second
[still nothing]
Any ideas?
trillian55 said:
Hi,
anybody had an issue when MFT wont recognize K900?
I have:
- installed drivers
- loaded ROM into MFT
- turned off K900
- connected it
[nothing happened]
- pressed power ON for 1 second
[still nothing]
Any ideas?
Click to expand...
Click to collapse
Your phone is ON and disconnect to PC.
-install drivers to PC
- install MFT to PC ( I don´t know if works with Windows 8, for me works- Win7 64Bit)
- download ROM for MFT
-turn on MFT
-file- settings- change PID to 09EE, check Override and change Logger level to DEBUG- Apply- OK
-file-open- choose *.xml file from folder with ROM for MFT
- turn off phone (press & hold POWER button minimally 10 seconds.)
-connect phone to PC via USB cable
- MFT run, wait cca 5 min to finish
guide from youtube (with download links-drivers, MFT, ROM)
https://www.youtube.com/watch?v=BhvA_T694kw
Related
HI!
I from russia)
HTC don't power on, in the boot mode activesync don't conect to him(((
helpme!
flash a new rom with bootloader screen without activesync
Thanks, but how to me to make it?
Prompt me please!
I shall be very grateful!
download this rom: http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
Then put your smartphone in bootloader
press (volume down button + photo button ) and then power button for 2 second
when appear a screen color red - green - blue connect usb and install rom downloaded from pc
excuse me for my english
Gives out (260 error)...
Active Sync thus was switched - off, mtty writes that can not open usb port (((
Help!
dont install with Mytt.
you must only enter in bootloader
connect usb to phone and to pc
(activesync NO active)
and install new ROM from exe downloaded.
try
Tried, it deduces error 260, and mytt I tried to connect already then, but unsuccessfully....
RESET pc and phone.
and try
you enter to boot loader?
reset made) some times, boot loader is included
But connection does not occur.
uuuhhmmm!!!
change USB PC port!!
i try with my oxy and work
I made all described above on 4 different PC result everywhere identical...
change USB PC port!!
i try with my oxy and work
Explain!
I have ugual problem, but i have flash in bootloader screen, without mytt, only connecting usb port and double clic to exe rom downloaded.
Hello I got this tablet Prestigio - PMP7280C3G V4.2.2 back in November, December time and I am wanting to Root it.
From a post I did back then on another website a user replied that he got it working and rooted using a method on a website into which here's the Instructions translated into English below....
-
Testing the current model PMP7280C3G_DUO with FW 1.0.05 and 1.0.07
Installing CWM :
First Tablet Do NOT let it lie somewhere near you will need it .
Second Download and unzip the file . PMP7280C3G_QUAD-recovery-flash.zip | Ulo?.to password : 7280
3rd Open Device Manager on the computer to turn off the tablet and connect the cable to the PC for a while, the new device
( MT65xx preloader ) right click update driver (if 2x click left to open the info on the device and select Update Driver )
and manually install the driver " MediaTek preloader USB VCOM Port " from the Drivers folder depending on your version of
Windows (tested on XP and Win7 32bit and 64bit ) - If does not happen the first time you just disconnect and reconnect
tablet , again captured the moment on the device.
4th Unplug the tablet and start Flash_tool.exe
5th Right click on a scatter - loading and set the path to the directory / PMP7280C3G Recovery
CWM/MT6589_Android_scatter_emmc.txt and let Open.
6th Up in a menu icon you click on a download in the following confirm with YES you want to continue .
7th Connect the tablet off - starts by itself recovery download to your tablet . Can now be two situations ; endings Will
a download window with a green circle . A second variant or passes first the download and install the computer starts by
itself another driver " MediaTek DA USB VCOM Port" and flash program throws an error . Not to worry if you just unplug the
tablet itself on off it and click again to download again, click YES to connect off tablet . Ted would arrive melo
successful recovery in tablet and confirmation will be green ring in a new window.
8.Odpojte cable from the tablet and hold the VOL + and Power 3 seconds and you are in CWM recovery .
ROOT :
First In the ROOT folder is a file Supers - v1.65.zip and upload the memory card or tablet.
Second Run the recovery and select "install zip from sdcard" then select a location where you want the file to install
depends by location " choose zip from sdcard " and " choose zip from internal sdcard " you will find include file and
press power.
3rd select reboot system
That's all .
Way back in the state with Origami recovery without root if required :
Approach, as well as with CWM just place ingredients into CWM Recovery Route to Recovery folder Origo . The rest is the
same. In the tablet to run the application supers and remove root data settings .
THNX :
XDA for Supers - v1.65.zip
-
-
-
Now from the above I have downloaded the files Turned off the Tablet gone into device manager and plugged in the cable from the Tablet to the USB-Port of my laptop. It says in the steps above in step 3 that a new device ( MT65xx preloader ) should show up but it doesn't not in device manager not even on my computer now is that because the tablet is turned off also when its off and plugged in it's just charging.
Also when I got this Tablet I already hooked it up to my laptop to put music onto the tablet and photos so does that mean I need to turn the tablet on and uninstall anything that is to do with the Tablet in device manager then go from step 3 again - Does anyone know if that sounds about right since the new device ( MT65xx preloader ) in device manager doesn't show up yet with it's turned off and plugged in.
Any help will be Massively Appreciated.
Hello,
*I have a problem with accessing phone PreLoader on Virtual COM port.*
I have NO PROBLEM with ADB driver and access. I can also access phone as a Device in Windows.
*But I want to create backup of my phone ROM.*
I want to read the ROM with SP Flash Tool to make backup.
(I cannot post links, so see full links in .txt file attached)
Phone: Alcatel IDOL One Touch Mini
Phone model code: 6012X
Full phone specs: gsmarena.com/alcatel_one_touch_idol_mini-5669.php
Chipset: Mediatek 6572
USB driver link page: developer.android.com/sdk/win-usb.html
Driver direct link: dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
OS: Windows 7, 64 bit
What I do:
------------
- I turn phone off. (Cannot remove battery - phone can not be opened=battery is not removaable)
- Connect to Windows
- Windows popup message for a device connected !
- Browse... choose driver for Win7,64bit,..... (only first time Windows wants driver)
- In Device Manager this device appear for a second, and then disappears: [PreLoader USB VCOM Port (COM_X)]
=== Result: Phone is not visible and cannot be accessed/shown in SP Flash Tool. Tried in versions 3.1224.01 (older)
and 3.1352.01 (newer interface).
What I tried to troubleshoot:
---------------------------------
- Used USBDeview.exe (64 bit), runned as administrator. Performed manual Uninstall for all old virtual COM ports.
- Tried another USB cable.
- Tried another USB port; Tried another USB port on another insernal USB hub; Tried on extranal USB hub.
- Tried another drivers, which I have found on fourms.
- Started Device Manager as admin, show hidden devices. Now I can see m phone as a light gray device.
Every time I plug phone, Windows creates a new VCOM port. I have to uninstall them manually with UsbDeview.
When I click properties on VCOM with/without currently phone attached windows says:
"Device status: Currently this hardware device is not connected to the computer. (Code 45)".
See screenshot: postimg.org/image/o3h86dbzt/
- Googled many times for Code 45 but cannot solve this problem.
- Obviously windows can see MediaTek chipset at least for a while. Tried to connect on turned off phone. Or with
phone started in Recovery mode (Meta mode?) - Power+Volume up. No luck here too.
=== Result: Failed to succeed. Nothing of above can help.
Please, help!
Hello,
after a few days I successfully unrooted & unbricked my LG-D605. I read a lot of articles and asked lot of questions and tried a lot of unsuccessfull ways. Here is my successfull solution.
My PC configuration
HP 650 (2,4 GHZ, 4 GB RAM, 500 GB drive)
OS openSUSE 13.2 64bit - software.opensuse.org
Oracle Virtualbox from oracle official repository - www.virtualbox.org
Downloaded Windows 7 home premium EN 32bit (very important - it was unsuccessfull with xp / 8.1 and czech localization xp / 7 / 8.1) - Windows 7 32-bit Home Premium x86 English on techverse.net
LG-D605 preparation - HARD RESET (form off-state Vol- & Power, when prompted Power, when prompted Power), next off
Needed downloads - tested
LG mobile drivers - attachment
LG Flash tool - attachment
ROM in .bin and LGUP_L9II.dll (extracted from kdz file) - file in google drive
Install process
Unpack and install LG mobile drivers
Unpack and install LG Flash Tool without run it
Overwrite file c:\\lg\lgfllashtool\megalock.dll with file megalock.dll in archive lg-flash-tool.zip
Connect phone in download mode (remove battery - connect phone to usb -> hold Vol+ -> insert battery)
After phone detection and installation in PC run Windows Device Manager and set LG device to port COM41
Run LG Flash Tool
Mark checkbox "Manual" and set in Model Config path to LGUP_L9II.dll and *.tot file (archive extracted kdz)
Click on OK
In PortSetting window leave marked only port 1
Click on Right Arrow
If you see in small window Port 1 "Ready", disconnect phone on 5sec and reconnect (if you on virtualbox, remember on reactivation usb port)
Done
hi, other flash metod is turn phone in download mode, and flash the kdz file with KDZ_FW_UPD.exe.
also downgrade or upgrade firmware very easy, open the software, select tipe 3gqtc, mode diag, open te kdz file, conect the phone in download mode and launch software update.
Note: in windows device manager disable lg modem device.
no problem in win xp.
sorry for my english.
I tried this metod but it gets stuck at 54%, jumps to 100 and it gives me a download failed error. What could it be?
Thanks man! It worked for me.
I had a slightly different configuration though...
Host OS: Fedora 21 64bit
Oracle VirtualBox 5.0
Guest OS: Windows 7 Professional EN 64bit with corresponding VirtualBox Additions installed
Installation of LG drivers and Flash Tool went well. But after connecting phone in Download Mode it took long time time install drivers which ultimately ended with fail - "drivers were not successfully installed" in yellow bubble. But the phone was shown in device manager so I continued.
Another thing is that I do not have enabled reactivation on usb port so I quickly pluged it in manually after phone rebooted. It worked too.
Only bad thing is that now I have Android 4.1 and have to upgrade back to 4.4. But this is much better situation than bricked phone so thanks again.
When I click right arrow, nothing is happening
Hi, unfurtunatlly I install TWRP JUI 7.1 when I was in EUI ROM. only red LED blink when USB cable is plugged in. PC says "unknown device" when Cool 1 is connetcted.
Phone is not visable to ADB, CDA and YGDP.
Do You have any idea how unbrick?
Ok. problem is resolved, I install new recovery by this thread instruction: https://forum.xda-developers.com/cool1/help/bricked-cool-1-t3726666/page2
• 1º install all drivers and MIFLASH
Remember that your device is erasing and only flashes the red light when connected to your computer, if your cell phone is in this state is a good sign as we will be able to get it to be identified to install the room;
2º HOW TO MAKE THE APPLIANCE IDENTIFIED ON THE PC
With the installed drivers connect your cell phone to your computer, open the Control Panel go to Device Manager and leave the screen open to observe: now with the phone connected we will press together the volume +, volume - and Power button together and secure them until the phone is identified by the system on the DEVICE MANAGER page (for the phone to be identified it may be necessary to keep pressing the buttons for more than 60 seconds, if it is not identified at the end of 120 seconds repeat the process of tightening buttons until the system identifies them).
• In case the system identifies but does not automatically install the driver it is necessary to perform a forced installation:
3º Forced driver installation:
With Device Manager open, we have the device to the computer, it has not been installed correctly for which it is necessary to perform the forced installation procedure. If the installation is not successful, the WINDOWS DRIVER DIGITAL SIGNATURE may be active and the installation of a set to first of all will disable it:
• Then type in the Windows search field and query by CMD, right-click and select to run as administrator with the command prompt open in administrator mode enter the following command without the quotes "bcdedit / set loadoptions DDISABLE_INTEGRITY_CHECKS "Ready a driver signature to be disabled, let's now forge a driver installation.
Right-click on the identified device but it is not recognized and select UPDATE DIVER, now on PROBE DRIVER SOFTWARE ON THE COMPUTER, click PERMIT THAT I CHOOSE ON A LIST OF AVAILABLE DRIVERS IN MY COMPUTER now in NEXT and on click in WITH THE DISK; Browse to your local disk where the driver was installed, LENOVO folder, normally installed in the directory: C: \ Program Files (x86) \ LenovoUsbDriver \ Navigate to a subfolder SERIAL and select the following file -Lenovo_ser click open and then In OK, Look for Qualcomm HS-USB QDLoader 9008 and confirm installation, prompt your device is now correctly connected and available and available for MIFLASH.
4º USING MIFLASH
Now with the drivers properly installed open the MIFLASH 1 click on REFRESH 2 select the folder of the recovery room that must be unzipped and 3 click on FLASH wait until the process finishes "in my case presented error at the end of the installation, but did not interfere , the process was enough so that I could already open the recovery mode of the mobile. "
• With the MIFLASH still open now press the Power button, volume - and volume + again until you make the identification noise on your computer again, in MIFLASH search for the EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 folder and select the twrp subfolder and a REFRESH from your device should be recognized by MIFLASH, now click on FLASH and wait for the end of the installation.
With the twrp installed enter into recovery mode on your cell phone by pressing the Power buttons and the volume + button, click Wipe, Format Data, type yes and confirm this will delete your cell partition.