Related
Hi, I have problems to regiister on my carriers network. My Z Ultra can see all available networks but refuses to connect toany of them. I tried several different ROMS without success. I also took out the SIMcard and put it into an old phone (no smartphone) and with that it connected instamntly. My carrier told me to wait but I´m reaklly fed up with waiting. Does anbybody have a clue what might be the issue here?
magnusaaa said:
Hi, I have problems to regiister on my carriers network. My Z Ultra can see all available networks but refuses to connect toany of them. I tried several different ROMS without success. I also took out the SIMcard and put it into an old phone (no smartphone) and with that it connected instamntly. My carrier told me to wait but I´m reaklly fed up with waiting. Does anbybody have a clue what might be the issue here?
Click to expand...
Click to collapse
Do you have an IMEI number?
Have
I bought this phone recently and i beleive tthat the imei number is on one of the receipts. However could you perhaps tell me a way of finding IMEI without hazzle..? I scarefully start to grasp that this might be an IMEI issue of which i have no clues or experience. I+m fammiliar with adb and rooting though. What is your advice?
magnusaaa said:
I bought this phone recently and i beleive tthat the imei number is on one of the receipts. However could you perhaps tell me a way of finding IMEI without hazzle..? I scarefully start to grasp that this might be an IMEI issue of which i have no clues or experience. I+m fammiliar with adb and rooting though. What is your advice?
Click to expand...
Click to collapse
Open the dialer and enter *#06#. A new window with a bunch of numbers should pop up. If it says "0" or "0000", your IMEI is gone, and we'll take it from there.
Note: Do not post your IMEI here.
Code Zero
OK you are right i surely mesed something up because all i get from that code is a hole bunch of zeros. Would be happy for rfurther advive.
yes
By the way, my platform is ubuntu. So I am familiar with some cli actions.
magnusaaa said:
OK you are right i surely mesed something up because all i get from that code is a hole bunch of zeros. Would be happy for rfurther advive.
Click to expand...
Click to collapse
I see, so i'm assuming that you've been on 290 and then downgraded to 257 or 532? If yes, that's why you've lost your IMEI. You can easily fix this by updating to 290 again, or flash NUT's 532 version in Flashtool.
LordManhattan said:
I see, so i'm assuming that you've been on 290 and then downgraded to 257 or 532? If yes, that's why you've lost your IMEI. You can easily fix this by updating to 290 again, or flash NUT's 532 version in Flashtool.
Click to expand...
Click to collapse
NUTS 532 sounds interesting. Does it have support for init.d and so on?
Can i flash cwm to boot after? My aim is to become on latest stock but rooted. Why? Is because i purchased a sony original miracast device and i would like that to work...
Suggest?
magnusaaa said:
NUTS 532 sounds interesting. Does it have support for init.d and so on?
Can i flash cwm to boot after? My aim is to become on latest stock but rooted. Why? Is because i purchased a sony original miracast device and i would like that to work...
Suggest?
Click to expand...
Click to collapse
Yup, it supports init.d.
It has dual-recovery installed as default, so you can either flash that one and stay fully rooted on 532 (with IMEI), or you can jump straight to 290, but then you'll have to flash it in Flashtool (so you get the latest baseband), and you'll have to root it yourself and install recovery.
Reason
LordManhattan said:
Yup, it supports init.d.
It has dual-recovery installed as default, so you can either flash that one and stay fully rooted on 532 (with IMEI), or you can jump straight to 290, but then you'll have to flash it in Flashtool (so you get the latest baseband), and you'll have to root it yourself and install recovery.
Click to expand...
Click to collapse
I beleive i messed it up while flasshing different roms and so son. But still my main goal right now is to be able to use ther miracast. Do you think it would work on the 532?
magnusaaa said:
I beleive i messed it up while flasshing different roms and so son. But still my main goal right now is to be able to use ther miracast. Do you think it would work on the 532?
Click to expand...
Click to collapse
I don't use Miracast, but i can't see why it shouldn't work? Does it require a special feature on Android 4.3?
Miracast
There has been several issues on miracast. Many people seeem to have failed to get it working. Maybe Sony has fixed that in Kitkat i dont knowe. But thge 532 is jellybean right?
LordManhattan said:
I don't use Miracast, but i can't see why it shouldn't work? Does it require a special feature on Android 4.3?
Click to expand...
Click to collapse
Ok i gather that you recommend that i flash the 532 ftf..? Using flashtool in flash mode? And where can i find that ftf?
magnusaaa said:
Ok i gather that you recommend that i flash the 532 ftf..? Using flashtool in flash mode? And where can i find that ftf?
Click to expand...
Click to collapse
The NUT 532 ROM is a Recovery file, so just flash it in recovery like you usually do, and you should in theory get your IMEI back. If not, flash a stock 290 FTF in Flashtool.
I have Miracast working on .136
It never worked on prior firmware - don't know if that was the tv's fault or the phone.
Sitting duck again
I tried flashing the NUT 532 and all seemed ok until i power the device up. I get thousands of force close to the system ui. Practically rendered my ZU useless. Does anybody recognize this issue? I tried a factory reset as my hands had to dance in order to reset it. Right now i dont know what fw oi am on but as i said the phone is uselesss.
magnusaaa said:
I tried flashing the NUT 532 and all seemed ok until i power the device up. I get thousands of force close to the system ui. Practically rendered my ZU useless. Does anybody recognize this issue? I tried a factory reset as my hands had to dance in order to reset it. Right now i dont know what fw oi am on but as i said the phone is uselesss.
Click to expand...
Click to collapse
Did you do a full wipe after flashing? If not, you should've done that. Also, no reason to panic. I understand why you might be, and i've been in much worse situations than this a couple of times, but it's nothing we can't solve. It takes some effort to hard brick a Sony. It just depends on how far you're willing to go to get it up and running. The easiest way would be to just flash 290 in Flashtool and be done with it. That way you'll have a fully funtional phone again with IMEI, and you can do the rooting later on when you have a system that's actually functioning correctly. Get your stress levels down again and root and what not when you have full control over your phone again
I'm in Norway btw, so since we're in the same time zone, i can help you out tomorrow after school/work if you need it.
LordManhattan said:
Did you do a full wipe after flashing? If not, you should've done that. Also, no reason to panic. I understand why you might be, and i've been in much worse situations than this a couple of times, but it's nothing we can't solve. It takes some effort to hard brick a Sony. It just depends on how far you're willing to go to get it up and running. The easiest way would be to just flash 290 in Flashtool and be done with it. That way you'll have a fully funtional phone again with IMEI, and you can do the rooting later on when you have a system that's actually functioning correctly. Get your stress levels down again and root and what not when you have full control over your phone again
I'm in Norway btw, so since we're in the same time zone, i can help you out tomorrow after school/work if you need it.
Click to expand...
Click to collapse
What I would do is do a flash of the FTF in my guide on downgrading the ZU/recoverinf the IMEI (parse be to [NUT]) http://forum.xda-developers.com/showthread.php?t=2593918
That should give you a clean stock sony .532 firmware ready to root. To root use Bin4ry's tool linked in LordManhatton's guide, then run through the steps in [NUT]'s .290 locked BL ROM thread and the his .136 locked BL thread. This has to be done in order if you are keeping a locked BL all the way through.
THNX
I am very thankful, for your guide and assistance. I am back on stock 532. Is it possible to flash another kernel/boot since this 532 sems to be without root and reovery. All tother things are back though. I cant find te thanks button. Where is that here on xda..?
Could i jjust write fastboot flash boot and then the actual boot.img? So that i can root it...
Got my XZU last Saturday and decided today to keep it. Being long out of the Sony-world (last was an XS, now coming from a Find 5), I've got some questions. I'm also going to search for the infos, but I feel a single thread for "my stuff" makes it easier for me, so please be kind.
So, for the current state, here's the device's information.
- Sony Xperia Z Ultra (C6833), black
- running on Vodafone DE
- Android version 4.2.2
- Baseband version 8974-AAAAANAZQ-10220006-09
- Kernel 3.4.0-perf-gde8296d-02194-ga2561a5
- Build 14.1.B.1.510
- The device shows me an update to 14.2.A.1.136
Questions:
1) Do Sony's official updates only update Android + Sony Apps or are there also firmware updates included?
2) I want to root and install a custom ROM, should I start from the current build or should I upgrade to $something first?
3) I've read that KitKat is restricting SDcard usage for non-system apps. Do custom 4.4 ROMs work around this(,yet) or should I update to 4.3 max?
4) I probably won't use the camera much, if at all, still, most custom ROMs can't get the camera quality on a level the stock ROM has, so how bad is it on this device?
5) is the PowerCover CP12 available somewhere in the EU? It's "out of stock" in all big shops I looked at in .de,.at,.ch and the Twitter-Team wasn't really helpful. Ordering from outside the EU would be possible, but pretty much guaranteed to get stuck at the customs where the next office is ~50km away and doesn't have work-friendly times at all.
6) About screen protectors: a) can I apply them over the shatter shield and if so b) will input by pens or something still work on a decent level?
7) is there a prefered solution of recoveries on this device or does it not matter at all, if I'd choose CWM or TWRP(or is there something else entirely)?
8) are there known problems in general with custom ROMs regarding external hardware? I'd like to use my "SmartWireless Headset Pro", my "SmartWatch (1)" and TV-Out
That's it for now, thanks for any help
1) The 136 update is a firmware update (to Android 4.3), but they also push out updates for their Sony apps.
2) You have to update to at least 290 (Android 4.3) if you don't want to lose your IMEI when you flash a custom ROM. Also note that you'll lose your IMEI if you downgrade from 136/290 to anything older. There are no real reasons to downgrade though, but just keep that in mind. It's easily fixable, so it's not the end of the world if you do it.
3) Yes, there's a workaround to get SD card working on KitKat (you just have to replace one file)
4) The camera is still bad on custom ROMs. It might get better with official Sony KitKat.
5) I have no idea.
6) a) Yes. b) Yes.
7) We've got double recovery, meaning you'll get both CWR and TWRP when you flash recovery, so use the one you prefer. (Vol Up for CWR and Vol Down for TWRP)
8) I think the only known issue on 136 is that Bluetooth might be a little wonky, but i'm not sure, so be sure to read around here since there's a thread about it.
Thank you for that.
In regard to 1), I meant firmware updates of hardware, f.e. the Find5 received some updates regarding the touchscreen.
As for 2), so there's currently no reason not to install the latest official Sony update, meaning it's also rootable without too much hassle? What would be the consequences of a lost IMEI?
S.D.Richards said:
Thank you for that.
In regard to 1), I meant firmware updates of hardware, f.e. the Find5 received some updates regarding the touchscreen.
As for 2), so there's currently no reason not to install the latest official Sony update, meaning it's also rootable without too much hassle? What would be the consequences of a lost IMEI?
Click to expand...
Click to collapse
Bugfixes are included in firmware updates, so they don't release an update to fix one minor thing. The Find5 receives updates every two weeks, if i'm not mistaken?
There's really no reason to update to 136 (the newest) if you're going to flash a custom ROM. Rooting is fairly easy if your bootloader is unlocked, and it only takes a couple of minutes, but it's a little more complicated if your bootloader is locked. Luckily, you're on 510, meaning it's even easier to root, and once you've rooted 510, make a backup of your TA partition. It holds all of your unique DRM files that makes X-Reality work etc. You'll lose the TA partition when you unlock the bootloader, so that's why you have to make a backup of it before you unlock it. Once you've done that, update to 290, unlock the bootloader, root it and do whatever you'd like to do.
Thanks again.
Now rooting worked(+OTA keeper from the Playstore), so did creating the TA backup.
Having a glance over the custom ROMs available as of now, I think I'd like to stay on rooted stock until Omni (official) comes around.
So what would be the (better) procedure to get latest Sony ROM running? Use Sony's updater and hope OTA keeper works or unlock, install recovery and flash a pre-rooted FTF?
S.D.Richards said:
Thanks again.
Now rooting worked(+OTA keeper from the Playstore), so did creating the TA backup.
Having a glance over the custom ROMs available as of now, I think I'd like to stay on rooted stock until Omni (official) comes around.
So what would be the (better) procedure to get latest Sony ROM running? Use Sony's updater and hope OTA keeper works or unlock, install recovery and flash a pre-rooted FTF?
Click to expand...
Click to collapse
OTA Root Keeper doesn't work on 4.3, so you'll lose root no matter what you do. Are you still on 510, or have you updated to something else?
You have your TA partition backed up now (recommend you to upload it to your Drive or Dropbox), so you can unlock the bootloader without permanently losing the TA partition. It'll delete it when you unlock the bootloader, but you can easily restore it again in case you have to send it in for repairs. Rooting 290 and everything else becomes so much easier and faster the second your BL is unlocked, so head over to the General section and look for Jackie's root guide and see if that's something you might want to do...
...or you can simply stay with the firmware you're on now, granted it's not the most stable firmware version, but it'll save you a lot of time. Official KitKat is also scheduled for release this month, so you can:
A ) Stay on current firmware and wait for official Sony KitKat
B ) Go all out and flash a custom ROM
I'm currently running the GPe ROM, and I can highly recommend it. It's solid as a rock with no bugs.
Any questions?
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
OTA Root Keeper doesn't work on 4.3, so you'll lose root no matter what you do. Are you still on 510, or have you updated to something else?
Click to expand...
Click to collapse
Still on 510, bedtime was up and I don't wanted to do something stupid with a sleepy head.
You have your TA partition backed up now (recommend you to upload it to your Drive or Dropbox), so you can unlock the bootloader without permanently losing the TA partition.
Click to expand...
Click to collapse
Yes, did that and mirrored it over a few systems. BTW, if I'd ever go back to stock, would the TA-p get changed so I'd need to back it up again or does it stay the way it is over the phone's lifetime?
It'll delete it when you unlock the bootloader, but you can easily restore it again in case you have to send it in for repairs. Rooting 290 and everything else becomes so much easier and faster the second your BL is unlocked, so head over to the General section and look for Jackie's root guide and see if that's something you might want to do...
Click to expand...
Click to collapse
No problem, I had my Xperia S unlocked, so I now the procedure. Only question related to that: I read that for the Z1(?) there's a minimal version one should update to before unlocking the BL, if you don't camera stops working or something - so, is this also a problem on the ZU or has this already been fixed?
I'm currently running the GPe ROM, and I can highly recommend it. It's solid as a rock with no bugs.
Click to expand...
Click to collapse
I'll have a look at it, thanks.
S.D.Richards said:
.
Yes, did that and mirrored it over a few systems. BTW, if I'd ever go back to stock, would the TA-p get changed so I'd need to back it up again or does it stay the way it is over the phone's lifetime?
Click to expand...
Click to collapse
The TA partition is unique to your device, so you do it only once, so be sure to not lose it.
No problem, I had my Xperia S unlocked, so I now the procedure. Only question related to that: I read that for the Z1(?) there's a minimal version one should update to before unlocking the BL, if you don't camera stops working or something - so, is this also a problem on the ZU or has this already been fixed?
Click to expand...
Click to collapse
The ZU has never had any of the camera issues when we unlock the bootloader, so there's nothing to add here
Sent from my C6806_GPe using Tapatalk
So to be clear, when you're talking about the GPe ROM, you're meaning this one: http://forum.xda-developers.com/showthread.php?t=2608708 ?
So if I'd like to try this, I'd need to:
1. unlock bootloader
2. install recovery
3. take NAND backup
4. Flash .290 fw
5. flash this ROM
Correct?
S.D.Richards said:
So to be clear, when you're talking about the GPe ROM, you're meaning this one: http://forum.xda-developers.com/showthread.php?t=2608708 ?
So if I'd like to try this, I'd need to:
1. unlock bootloader
2. install recovery
3. take NAND backup
4. Flash .290 fw
5. flash this ROM
Correct?
Click to expand...
Click to collapse
The bootloader unlocking doesn't need to be the first step since you can flash Recovery on a locked bootloader. You can do everything except the ROM flashing on a locked bootloader. But yeah, that looks fine to me. Be sure to download the tweaked GPe version that includes Recovery and SD fix.
If you can't bother making a NAND:
- Unlock the bootloader
- Update to 290
- Flash boot.img (includes recovery)
- Boot into recovery and flash (VOL UP when LED lights up)
- Done.
Thanks again, could/would you link me to a .290 ftf for germany/europe/generic? The ones I found are either for other regions or the links seem to be down.
Here's 290 EU for the C6833.
https://mega.co.nz/#!VR4HyJia!PGxJXHOi8V-eJpWDnsJKShRPlhoYHR5DpFRkko6m0Nk
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Here's 290 EU for the C6833.
https://mega.co.nz/#!VR4HyJia!PGxJXHOi8V-eJpWDnsJKShRPlhoYHR5DpFRkko6m0Nk
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Thanks, already found that link, but it gives me a "the file you are trying to download is no longer available"-error.
Already searched on Google, but couldn't find one, yet, or only for the other models.
Here's the Chilean 290 for C6833. It doesn't matter which one you use, and you're planning to flash the GPe, so just flash this one and get it done
Sent from my C6806_GPe using Tapatalk
Thank you very much for all your help, GPe is up and running smoothly now.
Apart from anything looking pretty huge, guessing different DPI settings compared to Sony's values, it's fine so far. One question though: under display settings it says X-Reality is on. Is that just cosmetics, since at no point I restored the TA-backup. If it's "fake", is it possible to restore TA and have it working or would that "trash" the system and restore should only be done in case of a stock re-install?
S.D.Richards said:
Thank you very much for all your help, GPe is up and running smoothly now.
Apart from anything looking pretty huge, guessing different DPI settings compared to Sony's values, it's fine so far. One question though: under display settings it says X-Reality is on. Is that just cosmetics, since at no point I restored the TA-backup. If it's "fake", is it possible to restore TA and have it working or would that "trash" the system and restore should only be done in case of a stock re-install?
Click to expand...
Click to collapse
just cosmetic and does nothing. If you restored the TA the GPe rom would fail to boot.
blueether said:
just cosmetic and does nothing. If you restored the TA the GPe rom would fail to boot.
Click to expand...
Click to collapse
Thanks for that quick answer, satisfied for now, so I can finally go to sleep
One last thing. Just change ro.sf.lcd_density=400 to 320 in build.prop to get the same sized UI like the Sony ROM. Unless you like 400.
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
One last thing. Just change ro.sf.lcd_density=400 to 320 in build.prop to get the same sized UI like the Sony ROM. Unless you like 400.
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Perfect, just what I've been looking for, thanks.
Now to hope that the ZU also gets double tap to wake, than I'd be pretty happy.
S.D.Richards said:
Perfect, just what I've been looking for, thanks.
Now to hope that the ZU also gets double tap to wake, than I'd be pretty happy.
Click to expand...
Click to collapse
Yeah, the leaked footage from the Z2 KitKat build shows the option to use double tap to wake, so it looks like we'll get it. It's a kernel feature, so it'll work on mostly anything out there.
Hello all,
Is there a stock ROM available for the MT2L03 without requiring a new Recovery?
I bought the one from Consumer Cellular and wanted to replace it with the ROM from the version bought directly with Huawei.
Is it possible?
Thanks!
ijrr said:
Hello all,
Is there a stock ROM available for the MT2L03 without requiring a new Recovery?
I bought the one from Consumer Cellular and wanted to replace it with the ROM from the version bought directly with Huawei.
Is it possible?
Thanks!
Click to expand...
Click to collapse
Do you want to flash a new ROM altogether ? I, too, have the same phone from Consumer Cellular and have replaced the ugly boot screens. In any case, check this thread [https://drive.google.com/folderview?id=0B7lyht1oiGRRNEl4dlJhdVhnQ00&usp=sharing]. Various versions of the stock firmware are there. The one that ends with 148 is the latest.
Let us know the results.
Thanks! A few doubts: have you replaced your ROM with this b148? Or just the boot screens? If you replaced the ROM, did you have to use a special recovery or just used the Update via Local File under Settings?
ijrr said:
Thanks! A few doubts: have you replaced your ROM with this b148? Or just the boot screens? If you replaced the ROM, did you have to use a special recovery or just used the Update via Local File under Settings?
Click to expand...
Click to collapse
No, I did not flash any ROM. I was just irritated by the various boot screens. As I was able to replace them, I didn't feel it necessary to flash the stock ROM and I didn't think the changes in v. 148 merited all the additional time it would have taken to flash.
Anyway, if you have flashed, let us know the results.
Those stock firmwares don't seem to work on my consumer celluar version.
I used mtyler7807's TWRP backup and replaced the logos and stuff.
baii said:
Those stock firmwares don't seem to work on my consumer celluar version.
I used mtyler7807's TWRP backup and replaced the logos and stuff.
Click to expand...
Click to collapse
Did you get the hotspot option? Because Consumer Cellular removed it.
All I wanted is to replace the whole thing with the original/standard ROM.
medwatt said:
No, I did not flash any ROM. I was just irritated by the various boot screens. As I was able to replace them, I didn't feel it necessary to flash the stock ROM and I didn't think the changes in v. 148 merited all the additional time it would have taken to flash.
Anyway, if you have flashed, let us know the results.
Click to expand...
Click to collapse
I couldn't flash. It says: oemsbl version list check error
I tried the B148 and B126.
It is suppose to get hotspot back but I am not sure as I never use that.
Sent from my 306SH
baii said:
It is suppose to get hotspot back but I am not sure as I never use that.
Sent from my 306SH
Click to expand...
Click to collapse
Is your phone completely stock ? Are all traces of consumer cellular gone ? Is everything working as it should ?
medwatt said:
Is your phone completely stock ? Are all traces of consumer cellular gone ? Is everything working as it should ?
Click to expand...
Click to collapse
I wouldn't say it is completely "stock", as it is not, and probably require some tinkering to get future update if I understand it correctly. Though the consumer celluar thing are gone indeed, except the folder in root.
I only did limited test as the phone is intend for my parents buy they refuse to use a phone w/o case (and the case ship from china...), voice call is fine(after unlock code from ebay), wifi is fine.
I too hope in the future there would be a way to wipe it completely and put stock firmware on it.
baii said:
I wouldn't say it is completely "stock", as it is not, and probably require some tinkering to get future update if I understand it correctly. Though the consumer celluar thing are gone indeed, except the folder in root.
I only did limited test as the phone is intend for my parents buy they refuse to use a phone w/o case (and the case ship from china...), voice call is fine(after unlock code from ebay), wifi is fine.
I too hope in the future there would be a way to wipe it completely and put stock firmware on it.
Click to expand...
Click to collapse
So, if:
1. Consumer Cellular is not completely gone
2. Updating the phone in the future will not as straightforward as for those with original stock roms
3. Some apps don't function as properly as they should (like the camera shooting at lower resolutions)
Whats, then, the point of flashing the rom. The only reason I want to flash is to be able to easily install updates as Huawei releases them and flashing the rom by mtyler7807 doesn't seem to alleviate that problem. But you flashed mtyler7807's rom. Why did you do that ? Surely, you there's an advantage somewhere that I missed that's not called getting hotspot ?
medwatt said:
So, if:
1. Consumer Cellular is not completely gone
2. Updating the phone in the future will not as straightforward as for those with original stock roms
3. Some apps don't function as properly as they should (like the camera shooting at lower resolutions)
Whats, then, the point of flashing the rom. The only reason I want to flash is to be able to easily install updates as Huawei releases them and flashing the rom by mtyler7807 doesn't seem to alleviate that problem. But you flashed mtyler7807's rom. Why did you do that ? Surely, you there's an advantage somewhere that I missed that's not called getting hotspot ?
Click to expand...
Click to collapse
I needed chinese, and consumer cellular version do not have that. So I needed to root, if I needed to root I may as well get the updates from stock (148 i think?). The consumer cellular rom is build 132 or 136 something. I would't had touch it one bit if it had chinese by default.
baii said:
I needed chinese, and consumer cellular version do not have that. So I needed to root, if I needed to root I may as well get the updates from stock (148 i think?). The consumer cellular rom is build 132 or 136 something. I would't had touch it one bit if it had chinese by default.
Click to expand...
Click to collapse
Ok. Got your point. Can you verify that the camera app takes images in 8MP instead of 13MP ?
medwatt said:
Ok. Got your point. Can you verify that the camera app takes images in 8MP instead of 13MP ?
Click to expand...
Click to collapse
The camera app default to 8MP for w.e reason, I just changed it back to 13MP and take 13MP fine.
I'm in the UK and we have a place call Cash Converters, it's known for selling second hand goods.
I bought myself a Sony Xperia Z2 Tablet LTE 16gb in mint condition with all the accsessories and box.
I paid just under £150.
I was running Lollipop but for me personally the device was slow. I downgraded to KitKat and it's great, fast as hell. really impressed!
I'm not rooted and I'm on the latest KitKat before the Lollipop update.
I removed all the bloatware 1 by 1 and removed the Google apps I wasn't going to use.
I'll tell you now, it's reallly fast.
well to my question; Because I'm on the latest KitKat before Lollipop - is there a way I can root my device?
PS: I don't want to spam the forum so I'll ask here - what sort of battery life are XDA Members getting with their Z2 Tablet?
Lollipop is faster than Kitkat on this device.
Must have been something else than the firmware which slowed your device down.
bwoiisc0tty said:
I'm in the UK and we have a place call Cash Converters, it's known for selling second hand goods.
I bought myself a Sony Xperia Z2 Tablet LTE 16gb in mint condition with all the accsessories and box.
I paid just under £150.
I was running Lollipop but for me personally the device was slow. I downgraded to KitKat and it's great, fast as hell. really impressed!
I'm not rooted and I'm on the latest KitKat before the Lollipop update.
I removed all the bloatware 1 by 1 and removed the Google apps I wasn't going to use.
I'll tell you now, it's reallly fast.
well to my question; Because I'm on the latest KitKat before Lollipop - is there a way I can root my device?
PS: I don't want to spam the forum so I'll ask here - what sort of battery life are XDA Members getting with their Z2 Tablet?
Click to expand...
Click to collapse
Well, it depends on the version of KK. If it's 4.4.2 the root process is definitely easy by running the easy root (towel root) program. After that, the towel root author got hired by Sony, so, so much for getting any simple root processes.
As with 4.4.4, you can get root, but you'll need either to use;
a) Bootloader unlocked, and a modified Boot Image Ramdisk to get full System RW
b) Install Nutz dual recovery (easier with bootloader unlocked)
With LolliPop, I already had bootloader unlocked, so I installed the latest Dual Recovery by Nutz, and installed the latest pre-rooted LolliPop build.
One note on unlocking your bootloader if you decide to go that method. Back up your DRM keys first. Then if you ever decide to go back to stock, you can reflash them. Note it only works initially with 4.4.2 Builds if I'm not mistaken. To be honest, I have them backed up, but don't really notice them missing. Supposed t maybe do something with camera or video enhancements, but I can't tell the difference.
As with speed and battery, I can't tell the difference between the 2 versions. Benchmarks are about the same. Battery life is subjective depending on how you use the tab.
Moscow Desire said:
Well, it depends on the version of KK. If it's 4.4.2 the root process is definitely easy by running the easy root (towel root) program. After that, the towel root author got hired by Sony, so, so much for getting any simple root processes.
As with 4.4.4, you can get root, but you'll need either to use;
a) Bootloader unlocked, and a modified Boot Image Ramdisk to get full System RW
b) Install Nutz dual recovery (easier with bootloader unlocked)
With LolliPop, I already had bootloader unlocked, so I installed the latest Dual Recovery by Nutz, and installed the latest pre-rooted LolliPop build.
One note on unlocking your bootloader if you decide to go that method. Back up your DRM keys first. Then if you ever decide to go back to stock, you can reflash them. Note it only works initially with 4.4.2 Builds if I'm not mistaken. To be honest, I have them backed up, but don't really notice them missing. Supposed t maybe do something with camera or video enhancements, but I can't tell the difference.
As with speed and battery, I can't tell the difference between the 2 versions. Benchmarks are about the same. Battery life is subjective depending on how you use the tab.
Click to expand...
Click to collapse
what firmware do I need to be on to get my bootloader unlocked?
bwoiisc0tty said:
what firmware do I need to be on to get my bootloader unlocked?
Click to expand...
Click to collapse
You can unlock your bootloader with any version. In the forums there is an app called Flashtool if I'm not mistaken that you can use to relock the bootloader.
Read this;
http://forum.xda-developers.com/showthread.php?t=2747676
Be aware it'll wipe your /Data partition so you'll need to re-install your downloaded apps. Maybe docs and photos as well.
Moscow Desire said:
You can unlock your bootloader with any version. In the forums there is an app called Flashtool if I'm not mistaken that you can use to relock the bootloader.
Read this;
http://forum.xda-developers.com/showthread.php?t=2747676
Be aware it'll wipe your /Data partition so you'll need to re-install your downloaded apps. Maybe docs and photos as well.
Click to expand...
Click to collapse
yeah I read that but when I check, it says "bootloader unlock allowed: no" ?
bwoiisc0tty said:
yeah I read that but when I check, it says "bootloader unlock allowed: no" ?
Click to expand...
Click to collapse
Aha. Similar to mine. I wound up getting a Demo model (unknowingly). Had the same "no" for bootloader. I wound up flashing a different "Ftf" file using Flashtool. Put a different region Rom on it. Workedfor a couple of folks, unless you have one of the carrier brands like Verizon, ATT, Tesla, etc.
So try flashing a 4.4.2 FTF file from a different region. See if it installs an unlockable bootloader. It's worth shot.
Moscow Desire said:
Aha. Similar to mine. I wound up getting a Demo model (unknowingly). Had the same "no" for bootloader. I wound up flashing a different "Ftf" file using Flashtool. Put a different region Rom on it. Workedfor a couple of folks, unless you have one of the carrier brands like Verizon, ATT, Tesla, etc.
So try flashing a 4.4.2 FTF file from a different region. See if it installs an unlockable bootloader. It's worth shot.
Click to expand...
Click to collapse
I'm in the UK and my Z2 Tablet LTE was on the EE network but I paid for an online service and got it unlocked. (the network that is)
am I screwed? where can I find a different region firmware????
bwoiisc0tty said:
I'm in the UK and my Z2 Tablet LTE was on the EE network but I paid for an online service and got it unlocked. (the network that is)
am I screwed? where can I find a different region firmware????
Click to expand...
Click to collapse
Having issues copying the link, but go to the regular z2 forum, then the cross development forum. There is a thread for "xperiafirm". This is a Pc app that will download almost every version Ftf file for Sony devices. Find your device (511, 521, etc) and download a couple different region Ftf files.
Flash using Flashtool that I sent you a link to.
Moscow Desire said:
Having issues copying the link, but go to the regular z2 forum, then the cross development forum. There is a thread for "xperiafirm". This is a Pc app that will download almost every version Ftf file for Sony devices. Find your device (511, 521, etc) and download a couple different region Ftf files.
Flash using Flashtool that I sent you a link to.
Click to expand...
Click to collapse
I can't find it?
edit:
it's okay, thanks. I found it. gonna try!!!!
bwoiisc0tty said:
I can't find it?
edit:
it's okay, thanks. I found it. gonna try!!!!
Click to expand...
Click to collapse
You may have to try a couple different ones. Don't flash any of the carrier types.
Moscow Desire said:
You may have to try a couple different ones. Don't flash any of the carrier types.
Click to expand...
Click to collapse
what do you mean by "Don't flash any of the carrier types."?
I've downloaded a few but how do I flash them? they're not ftf files?
bwoiisc0tty said:
what do you mean by "Don't flash any of the carrier types."?
I've downloaded a few but how do I flash them? they're not ftf files?
Click to expand...
Click to collapse
what's branded and version?
bwoiisc0tty said:
what's branded and version?
Click to expand...
Click to collapse
OK, so here's the scoop.
1. Don't flash any files from our forums (zip) files. They are for custom recoveries.
2. Use the experiafirm software to download specific ftf files for your device. I'm mobile now and can't paste a link. You can find the Pc app by going to the Z2 phone forum, then go to Sony cross development. There you find the ExperiaFirm Pc app. Install it to a Windows Pc (instructions are in the post). Select your device on the left (Z2 Tablet), select specific model, and you should get all available factory firmwares on the right.
3. Select a firmware to download to Pc. Pay attention to the carrier versions. You probably don't want these. By carrier, I mean phone companies like Orange, Tesla, Version, etc. These are devices that are sold by the phone providers and usually you can't unlock the bootloader.
You want just normal Ftf files, like Vk, Ru, Baltic, etc. Should be about 30 or so available for your device.
Moscow Desire said:
OK, so here's the scoop.
1. Don't flash any files from our forums (zip) files. They are for custom recoveries.
2. Use the experiafirm software to download specific ftf files for your device. I'm mobile now and can't paste a link. You can find the Pc app by going to the Z2 phone forum, then go to Sony cross development. There you find the ExperiaFirm Pc app. Install it to a Windows Pc (instructions are in the post). Select your device on the left (Z2 Tablet), select specific model, and you should get all available factory firmwares on the right.
3. Select a firmware to download to Pc. Pay attention to the carrier versions. You probably don't want these. By carrier, I mean phone companies like Orange, Tesla, Version, etc. These are devices that are sold by the phone providers and usually you can't unlock the bootloader.
You want just normal Ftf files, like Vk, Ru, Baltic, etc. Should be about 30 or so available for your device.
Click to expand...
Click to collapse
thanks for all your help but I've gave up.
the link you told me about, xperiafirm, I couldn't get the ftf files. NO matter what I done.
I messed my Z2 LTE Tablet up and it was in a boot loop.
I fixed it with PC Companion and left it at that.
I have a Sony Xperia M2 too that I couldn't unlock it's bootloader, I kept getting "failed - command not succeed" so I just give up.
I have literally done everything and I still can't do it.
all I want is to calibrate my battery on my Z2 LTE Tablet & Sony Xperia M2.
is there something else I can try?
I'm running stock on both of them (latest in the UK through Sony's PC Companion) and I've disabled all the crap Sony apps and Google apps.
they're both fast now.
ugh.
bwoiisc0tty said:
thanks for all your help but I've gave up.
the link you told me about, xperiafirm, I couldn't get the ftf files. NO matter what I done.
I messed my Z2 LTE Tablet up and it was in a boot loop.
I fixed it with PC Companion and left it at that.
I have a Sony Xperia M2 too that I couldn't unlock it's bootloader, I kept getting "failed - command not succeed" so I just give up.
I have literally done everything and I still can't do it.
all I want is to calibrate my battery on my Z2 LTE Tablet & Sony Xperia M2.
is there something else I can try?
I'm running stock on both of them (latest in the UK through Sony's PC Companion) and I've disabled all the crap Sony apps and Google apps.
they're both fast now.
ugh.
Click to expand...
Click to collapse
Wow! Sorry experiafirm wasn't working for you. When I get time I'll install it here. It was working fine before I left Moscow. Currently on extended trip to care for elderly parents in the states. In the original post it stated a couple thing for the Pc,like recent Microsoft.net for example. Generally you just select your device on the left, then hit. "check all" in the upper right. Double click a firmware and it should download (if I remember correctly)
Moscow Desire said:
Wow! Sorry experiafirm wasn't working for you. When I get time I'll install it here. It was working fine before I left Moscow. Currently on extended trip to care for elderly parents in the states. In the original post it stated a couple thing for the Pc,like recent Microsoft.net for example. Generally you just select your device on the left, then hit. "check all" in the upper right. Double click a firmware and it should download (if I remember correctly)
Click to expand...
Click to collapse
yeah mate I tried that and it wasn't downloading any ftf files, I kept getting "file" formats and trying to flash them after creating with flashtool was a nightmare!
but thanks for your help, I appreciate it. I think I'm done though, I have charged my device all night and most of the day and both of them are sitting on 100% full.
so I'm happy.
I also found a way to calibrate my battery on both devices without root too. so all is good.
Moscow Desire said:
Wow! Sorry experiafirm wasn't working for you. When I get time I'll install it here. It was working fine before I left Moscow. Currently on extended trip to care for elderly parents in the states. In the original post it stated a couple thing for the Pc,like recent Microsoft.net for example. Generally you just select your device on the left, then hit. "check all" in the upper right. Double click a firmware and it should download (if I remember correctly)
Click to expand...
Click to collapse
any chance you can help me? I'm trying again.
what firmware should I flash to try and get my bootloader unlocked?????
You have to bundle the files downloaded from XperiaFirm, into an FTF, you do this with Flashtool:
http://www.xperiablog.net/2014/08/1...re-files-using-xperifirm-and-flashtool-guide/
You can skip the parts about Decrypting, because XperiFirm does that for you.
Hey Guys,
what do you think is the best costum rom (stable) for the Mate 10 pro?
Is it possible to flash it with Pie 9.0.161?
Thanks for Help :victory:
Just wait for the ota update to pie.
that's definitely a worse rom. i'm on it right now.
wooley4766 said:
Just wait for the ota update to pie.
Click to expand...
Click to collapse
I already have the Pie Update via Firmware Finder.
But i want to flash to a stable Pie Rom :fingers-crossed:
Pie Update
HauAbDuLauch said:
I already have the Pie Update via Firmware Finder.
But i want to flash to a stable Pie Rom :fingers-crossed:
Click to expand...
Click to collapse
If you have the Pie update from firmware finder it's an approved ROM unless you have a modified recovery it checks and you wouldn't be able to install it if it wasn't approved so you probably have the latest approved ROM
revjamescarver said:
If you have the Pie update from firmware finder it's an approved ROM unless you have a modified recovery it checks and you wouldn't be able to install it if it wasn't approved so you probably have the latest approved ROM
Click to expand...
Click to collapse
but no custom
Hi! Quick question. My BLA-L09 is on build number 8.0.0.131(c782). I'm rooted with Magisk via Pretoriano's TWRP using the all in one tool. I can't receive firmware updates because of this (they fail to install).
If I update to Pie, will I be able to root again with Magisk? How can make this update? I suppose I would need stock recovery back and don't know where to get it from it how to flash it. It was my first time doing this on a Huawei, I'm used to Samsung devices. Any help would be appreciated.
Thanks!
93starletgt said:
Hi! Quick question. My BLA-L09 is on build number 8.0.0.131(c782). I'm rooted with Magisk via Pretoriano's TWRP using the all in one tool. I can't receive firmware updates because of this (they fail to install).
If I update to Pie, will I be able to root again with Magisk? How can make this update? I suppose I would need stock recovery back and don't know where to get it from it how to flash it. It was my first time doing this on a Huawei, I'm used to Samsung devices. Any help would be appreciated.
Thanks!
Click to expand...
Click to collapse
Nope, you won't. Any version from 8.0.0.146 and above will contain the new bootloader which won't let you unlock it or install twrp, magisk or whatever, most probably you will brick your phone like I did.
You'll be a lot safer to stay on what you're on. Huawei did a nifty development to make life miserable to anyone which likes to customize their phone. Maybe they should be called Huapple from now on...
I was in a similar situation as you, 141 if I remember correctly. Installed Xposed via magisk, got a bootloop, did a system restore via erecovery, got it working again and lost magisk/root so thought it would be the time to do the ota, didn't know about the bootloader change so found I was on emui 9, tried to install twrp but that bricked the phone. So I tried to do the system restore via erecovery again, but that didn't work.
After that tried every possible way (inc. paying funkyhw etc.) to recovery the phone, no way. If you try to downgrade it to a version before 146 it will hardbrick leaving you with a paperweigth.
So if I were you, I wouldn't touch a thing. I gave up and am waiting for my Oneplus 6, much better phone for this stuff.
mirandam said:
Nope, you won't. Any version from 8.0.0.146 and above will contain the new bootloader which won't let you unlock it or install twrp, magisk or whatever, most probably you will brick your phone like I did.
You'll be a lot safer to stay on what you're on. Huawei did a nifty development to make life miserable to anyone which likes to customize their phone. Maybe they should be called Huapple from now on...
I was in a similar situation as you, 141 if I remember correctly. Installed Xposed via magisk, got a bootloop, did a system restore via erecovery, got it working again and lost magisk/root so thought it would be the time to do the ota, didn't know about the bootloader change so found I was on emui 9, tried to install twrp but that bricked the phone. So I tried to do the system restore via erecovery again, but that didn't work.
After that tried every possible way (inc. paying funkyhw etc.) to recovery the phone, no way. If you try to downgrade it to a version before 146 it will hardbrick leaving you with a paperweigth.
So if I were you, I wouldn't touch a thing. I gave up and am waiting for my Oneplus 6, much better phone for this stuff.
Click to expand...
Click to collapse
Thank you for the info! And what about staying on my current bootloader and flash a custom ROM on my already installed TWRP?
93starletgt said:
Thank you for the info! And what about staying on my current bootloader and flash a custom ROM on my already installed TWRP?
Click to expand...
Click to collapse
There is a ResurectionRemix rom that can be used for that. Just search for RR-O-v6.0.0-20180402-bkl-OpenKirin.zip it should work as this one's flashable by twrp. I haven't tried it so can't tell if it does. I have the file but I don't know if it's complete as it only contains system.img which seems strange as normally there would also be a boot.img or at least a kernel.img
mirandam said:
There is a ResurectionRemix rom that can be used for that. Just search for RR-O-v6.0.0-20180402-bkl-OpenKirin.zip it should work as this one's flashable by twrp. I haven't tried it so can't tell if it does. I have the file but I don't know if it's complete as it only contains system.img which seems strange as normally there would also be a boot.img or at least a kernel.img
Click to expand...
Click to collapse
Thanks! Last question. If I would like to go back to stock using the All In One Tool, how can I flash stock recovery? And where can I find it? Many thanks for your help.
are there custom roms for the huawei mate 10 pro??
cause cant find it on xda.
mine is stock it works but the no status bar pull down on lockscreen is anoying ;( sometimes and that only the stock sms app show on the always screen on...