[Q] help me please spft n test point - Android Q&A, Help & Troubleshooting

i have lenovo a3000 with the latest firmware upgrade
yesterday,i charge it in power off and when i wanna turn on it a3000 wont turn on
no indicator battery,cant power on,but detect on device manager (i pressed power+volume up but just for 2 second and the driver [mtk usb com] dissappear)
so i download factory rom n the latest sp flashtool
i found problem in download the original rom on sp flashtool
the code error 4001
i think its driver problem
then i follow yuweng guide http://forum.xda-developers.com/show....php?t=1943442
i cant find Test Point on my pcb tab
any ideas?please help me :crying:

Related

Archos 40 Titanium: Enable_Dram_Failed error

Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.

Please Help Me

Sir,
I port rom cm 12.1 on my MT6582 Lenovo A328 device. As i power it off, it takes time to open and few seconds TWRP appears and i reboot the system and suddenly stucks on the cm logo and i removed the battery and open again and try and try again and it does not open. I thought that my phone is hard bricked so i connect the device without a battery to the computer via usb cable. Open the sp flash tool and open my scatter file and download....but sp flash tool download progress is color red which means connection on port problem. I open device manager and saw ports....MTK USB Port appears to be the kind of my driver's device and I think that it should be MTK Preloader VCom to be able to flash the stock rom.......Hope you understand and thank you so much for your time.....

datawind flash problem wont power on

Plz help me....i tried to flash a ubislate 7c+x with sp tool and drivers were successfully intsalled first i used download only then it showed( pmt change) then i formated it from sp tool format option..then my tab doesn't turn on and then it shows enable dram..so i downloaded another firmware then again i flashed with sp tool this time it successfully flashed but my tab doesnt power on..i tried to flash without battery also but it doesn't worked..then i take a memory test it showed nand not detected.. and its doesnt power on....help me

Canvas nitro a311 softbricked, customer care cant repair it...

I TRIED TO REPAIR IT MYSELF AT HOME BUT YGDP FAILS AT 98%... AND SP FLASH TOOL GIVES BACK "S_BROM_CMD_JUMP_DA_FAIL( 2035)" found no solution on internet... it can still boot to fastboot mode... and when i turn it on it stucks at mmx logo.
please help...:crying::crying::crying:
sidhant1 said:
I TRIED TO REPAIR IT MYSELF AT HOME BUT YGDP FAILS AT 98%... AND SP FLASH TOOL GIVES BACK "S_BROM_CMD_JUMP_DA_FAIL( 2035)" found no solution on internet... it can still boot to fastboot mode... and when i turn it on it stucks at mmx logo.
please help...:crying::crying::crying:
Click to expand...
Click to collapse
( Solved )
1) switch off mobile and then connect it to pc
2) open device manager when shows your device then click shows hidden driver in device manager right click on all your device drivers and uninstall it
3)then disconnect phone and disable driver signature verification from windows setting
4)connect phone to pc pressing volume up button
5) in device manager you will see there unknown device or mt65xx preloader just right click on only unknown device and update driver manually ( the driver name mtk usb port) dont install mt65xx preloader driver
6) open sp flash tool select scatter file connect phone to pc when it shows mtk usb port in device manager click on download button
YOUR PROBLEM SOLVED if not work i am not responsible for your device bricked

Working ROM for Alcatel One Touch Pixi 3 (7) 9002A?

So I need to fix one of these and there's no zip or img of the ROM for it. There's a SP Flash tool backup but I can't use that because the device boots as soon as I connect it to my PC. I can only boot it into TWRP or fastboot mode. Is there a working ROM I can put on this? It really doesn't matter what, any ROM that can make it boot is fine.
You dont have correct drivers, if you have correct drivers the tablet WONT boot when plugged in for SPTools.
uninstall all your mtk drivers, all the vcom drivers, spflash tools...etc... reboot pc
I'm using spflashtools 5.1648.00: http://www.mediafire.com/file/qwgshp..._5.1648.00.rar dont run it yet.
I had to do THIS before I could do anything else, install the vcom drivers following this exactly: https://forum.xda-developers.com/ele...32-64-t3267033 reboot pc
Now, install this using the inbuilt installer: http://mtkusballdriver.com/download/mtk-usb-v1-0-1 and reboot pc once done.
NOW open sptools AS ADMIN, turn tablet off, open your sptools backup/rom in sptools, select FORMAT ALL AND DOWNLOAD from the drop down menu, press the green arrow download button and the 'stop' button will change colour.
plug the tablet to usb and the bottom bars on the flash tool should go red, then purple, then a slow yellow bar. Keep waiting until a box with a green circle pops up saying OK.
If it doesnt work, try another usb lead, try another port, if that doesnt work try a DIFFERENT sptools version, and another , and another... until you find one particular version that works with your particular tablet on your particular PC, it sounds so pointless but trust me from experience one that works for 99 people wont work for 1
9002a and 9002x
You can use a 9002x firmware for a 9002a it works great,
There are others as well, Use the sp slash tools to do it.
alcatel one touch pixi 3(7) 8055 firmware
can anyone please help me to this problem.. i try to fix my alcatel one touch pixi 3 7 by flashing the stock firmware but after flashing firmware using sp flash tool the error message pop up then flashing stop.. now my tablet wont open nor charging.. what should i do please help.
is there any custom rom for alcatel onetouch pixi 3 (7) 9002 tablet?

Categories

Resources