Hello guys. I have a problem on a tablet the touchscreen is reverse, if i touch on right the real touch go to left and vice versa. I found on internet software Dragon face for edit the rom. I downloaded the img file of supply and i try to edit (link http://moveontechnology.com/hugoenchina/?p=573). I know the link is in Spanish and im italian but the procedure are not clear.
however i know i need to change the value on system configuration :
ctp_revert_x_flag = 0
to
ctp_revert_x_flag = 1
i saved the file and save the rom, flash it....same problem is like not work the procedure. On the link there is another procedure for the INIT.RC
but i dont understand what i need to do. please help me
Related
Dear all,
As I write I have a Lenovo ET960 sitting on my desk, which is lying there for the last 2 weeks as I am unable to figure out how to change its menu language from Chinese to English. My uncle who was never able to use it gave it to me after all these years. It has WM2003SE (I think!), although I am sure the experts here will know all about it. I am very keen on fixing this issue, the trouble is I am novice in this area.
I have done some background research, but I still need some help from all you guys here. I have the the following requests.
1) I understand that there is no way to change the language of this phone as the OS is hard-coded in the Chinese ROM. One way is to hack this Chinese ROM and change it to English using a HEX-editor. An alternate way would be to use a third-party software to change the language, however I could not find one for WM2003. Once I hack the ROM and make the necessary changes, I should, in principle be able to install an upgrade to WM2003 (which I also do not have with me!).
To hack the Chinese ROM in ET960 and solve this issue I would need to know two things:
(a) Where to locate the ROM in this pocket PC using my desktop PC (via a USB cable connection)?
(b) I need a reference ET960 ROM (ET980 ROM may also work!) in English to compare the values to change accordingly.
(c) Finally, an upgrade to WM2003/WM2003SE (the firmware upgrade d/l link) and the upgrade method.
Now the trouble is I have never flashed a ROM before, so I need to know the steps. In addition I would also need to know the steps to the upgrade process.
I have managed to download the following softwares/tools which I think will help in the process, but I dont want to start the process until I get some feedback from you guys here.
(1)The lenovo.zip file _ftp: / / ftp.roverbook.com / RoverPC /Lenovo_ET960/
and the (2) ET960update.exe from gsmforum.ru, which can be used as an update tool for both Lenevo ET960 and ET980. I have also managed to download the upgrade instructions, but only in Chinese!. This is where my research ends. Now I request you guys to help me with the missing links to convert my ppc into English.
Thanks,
Jay
This Thai review (use Google Chrome and translate it to English) states the following:
Languages: Support English, Simplified Chinese, Tranditional Chinese Input but can not display Traditional Chinese character.
The screenshots also show the phone is using English. It might be as simple as changing the system language in your MUI settings (in the registry: HKLM>MUI and change SysLang to 1033 Dec/0409 Hex...HKCU>MUI and change CurLang to 1033 Dec/0409 Hex).
Hi rete, Thanks for the reply. I have never edited the registry in a pda. Is there a special tool that I have to use for editing the registry? The ET960 I have with me has a interface similar to this _http:/ / video.pomoho.com/ent/762870.
As everything is in Chinese, I am unable to make head or tail of anything. Please guide me if possible. Cheers, Jay
I am getting back to my ET960 issue after a gap. I really want to make this device (which has a great design) usable, for which I will need to convert the user interface to English.
Rete, I made the registry changes you suggested but nothing changed. So I will need to to find an alternate solution.
The ET960 has WM2003SE (ROM version: S603 051229 which is not WWE). It displays all the system folders as well as some of the installed applications UIs in English. But most of it is in Chinese.
I installed an English localization software (Paragon Inc, LEng for WM6) which translated my ET960s interface completely to English. But, the ActiveSync stopped working and the system folders could not be accessed after the installation of LEng. This tells me that if I can replace the *.mui files from CHS to ENG in the ROM, I will get an English interface.
But the trouble is that I am new to all this and do not know where to start. So I request for some guidance.
The other option to make the device usable is to boot Android from a microSD card, but I could not find an Android version anywhere from my ET960 (which has similar hardware to MDA compact & Yakumo Omikron). Please advice.
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
Hi,
Nobody can help?
Please, I can't use my phone.
how to did you bring your lenovo phone back to life cause mine get stuck in boot logo
Invalid Imei
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
neocortex95 said:
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
Click to expand...
Click to collapse
it is possible to restore imei BUT in there is not only code but some other settings that will be not restored or taken by default values.
in my case i restored it but i cannot connect to GSM operator ((
please share the nvram with me for s820 thx in advance!
it's easy how to do it (contact me if any issues)
thx a lot
Solution of NVRAM.img and no-services Lenovo S820
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
This is the solution....thanks
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
How do you apply it, I have the same problem.
The bat file is not working, it says cannot find adb.exe.
I put the adb.exe at system32 folder along with the dll files and still bat is not working
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
hi dear
lenovo s820 imei
Your phone will fix the problem?
I also have this problem.
[Solved] Solution For Recover your IMEI For Lenovo S820
1) You must Root your Smartphone by Framaroot 1.8.1 (Apk for simple usein smartphone)
2) Install Root Explorer
3) Open Root Explorer and go to dev Folder and check pttycmd1 file
4) If "Pttycmd1" not exist ,copy that from "dev/radio" Folder and paste to "dev" Folder
5) Install Terminal Emulator (like cmd in windows but in Linux andorid)
6) open Terminal Emulator and enter "su" then enter (For super user Authentication)
7) in next line enter this codes
echo 'AT +EGMR=1,7,"IMEI_1"'> /dev/pttycmd1
echo 'AT +EGMR=1,10,"IMEI_2"'> /dev/pttycmd1
IMEI_1 , IMEI_2 : you must enter 15 digits for each (For Valid Number use your old IMEI Code and if u want check that in
"imei-number.com/imei-validation-check"
8) After Each line only Press Enter and nothing more
9) You must Restart Your Phone (not fast booting)
10) After Restart Press *#06# and enjoy your Entered IMEI
11) You can Backup your IMEI ID By Software like MobileUncle (Suitable For Chines Mobile like Lenovo)
12) Good Luck
Afshin.jazi
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
nice share,,,
solved s820...
does nvram.img file needed with secro-sign.img to retain lost sr.no and imei no mac
does nvram.img file needed alongwith secro-sign.img file to retain the lost imei no sr.no mac address and bluetooth settings in meditek 6737m device name moto c plus.
Hi.. I have been trying to fix a tv stick for a few months now (basically is more about the knowledge i am getting - I am not desperate in fixing it). It is a strange piece, probably clone that i have been tricked in buying. It has an Allwinner A20 dual core cpu with an AP6210 wifi module...
Tried to flash another firmware ti improve it, ended up with the wifi problem. Wifi (and bleutooth) will not start. When i press the button, it just slides back to off... I have read and tried anything i could find on the internet. I have also tried tens of firmwares, but the wifi problem persisted (the original firmware is nowhere to be found).. To cut the story short, the device will not connect to a computer through ADB (it just doesn't seem to support this function - is not a matter of drivers). So everything i have been trying did not include this option...Also the recovery can not be changed to support backup and restore from custom recoveries (i.e CWM, or TWRP)..
What i did manage was to extract a backup from the rom, of another identical device, with the Nandroid App (online version, not through the recovery). Then i used the Dragonface program to edit another similar firmware (MK808C). While loaded, i open the FSOP folder which is the folder that dragonface collapses the loaded firmware for editing and then, i replaced the existing system folder with the one i had backed up trough the Nandroid procedure... Then hit the save button of the Dragonface...
I flashed the new *.img to my tv stick with the phoenix tool, and the tv stick booted normally, looking EXACTLY the same as when i first bought it. I even managed to get the bleutooth going this time, BUT, the bloody wifi still refuses to come on :-/
I must tell you, I know my way through some computer technical stuff but I am not an expert into the coding level and i haven't had the experience of Linux systems (thus i don't really understand coding). I really thought all settings and drivers are included in the system file and copying the original system file into another firmware, would do the trick.. but i guess is not that simple... The thing is that, the way i see it, the problem is probably hidden at the booting level... hitting the system configuration in the advance settings of the Dragon face, will open some coding thing which i don't understand.. but i do see the AP6210 module in that coding, which means that the new firmware includes those drivers..If anybody have any idea or can point me to the right direction I would really appreciate it.. Thanks
I have the same problem with AP6210 on H3 Allwinner STB box. After firmware ugrade from Android 4.4.2 to Android 10 Wifi just don't work, button slides back to off. Drivers are present. Have both firware files unpacked.
Please help! What i have to do? Sys_config? Init.rc?
Hello, I need a temporary file an application , specifically an image that is loaded into my phone, but as a thumbnail is going to say.
I would like to recover before she is removed , it is important, thank you : D
If you do not know , can you at least refer me to a place where people are more expert on the subject? ( English or French , as you want )
Hi all, I copy - pasted the title from an older thread :
https://forum.xda-developers.com/showthread.php?t=1982149
because I have exactly the same problem, but all the solutions I have found so far look outdated and don't work for Android Nougat (Samsung Galaxy S7 SM-G930F rooted with Odin as explained here). I need to access channel 149 (the wifi camera of my quadcopter)
So this is what I have tried :
1. WifiCodes.apk, described here. Gets root permits but when run, freezes and does nothing
2. Edit /data/data/com.android.providers.settings/databases/settings.db to change my country code, as explained here. The directory doesn't exists, and cannot find the settings.db file anyplace
3. Same but on /data/data/com.android.providers.telephony/databases/carriers; not sure where i saw this, but anyway doesn't exist neither
4. RegionChanger app. Gets root permit but does nothing
Of course Nougat has not advanced Wifi configuration to tinker with country codes nor 2.4 vs. 5.0 GHz networks.
Any other suggestion?
Thanks a lot!
i have nougat but on Galaxy note 5
i have tried those methods and i didn't found setting.db but i found that there is another files (like they changed setting db file with another way) the file called settings_global.xml and settings_secure.xml u can check this too u can find them in
data/system/users/0
u will find something like
(setting id="97" name="wifi_country_code" value="us" package="android" />)
<setting id="100" name="wifi_sns_visited_country_iso" value="us" package="android" />
the point is i changed them it change back to the default setting it was b4
donno how to force it to not get change by it self
Can change code but still KO
Hi, thanks a lot. I have changed the country code but still cannot see the camera's network. After googling a bit more, looks like the camera is not compatible with Android!!! (whatever this means). That is, doesn't show up in any Android device, but does on iPhones. Mysteries of Chinese engineering... So I gave up and acquire a different camera.
Btw, I don't have the problem you mention of reverting configuration.
Thanks again!