Related
On every ROM the camera causes the phone to reboot. I am very surprised that developers haven't paid any attention to this and released ROMs with this bug and call it an official build when the ROMs are more like early alphas its embarrassing.
Every dev knows that, instead of blaming them ask Samsung to release proper camera driver sources, which is not the case now.
aharnick2013 said:
On every ROM the camera causes the phone to reboot. I am very surprised that developers haven't paid any attention to this and released ROMs with this bug and call it an official build when the ROMs are more like early alphas its embarrassing.
Click to expand...
Click to collapse
Hi aharnick2013,
The last nightly I tried for CM10.1 was 06/17/2013 and the camera was working fine, apart from the usual audio bugs and poor camera performance.
I'm not sure about AOKP and AOSP, but for what I see in the CM changelogs, some parts of the sensor drivers in the kernel will be back ported from a previous release for the nightly of 06/20/2013, not sure if this has to do with the issue you are having as I never experienced myself in CM.
To be included in next nightly:
Derp fix. (android_frameworks_base)
Hide navigation ring if no targets are configured. (android_frameworks_base)
Cleanup. (android_frameworks_base)
Close notification panel when swiping away the last clearable notification. (android_frameworks_base)
Add media-caf repository (android)
u1: port sensors and modem interface from smdk4210 kernel (android_kernel_samsung_smdk4412)
Camera: Add a GPS indicator (android_packages_apps_Camera)
Check and fail early if requested wallpaper size exceeds maximum texture size. (android_frameworks_base)
Lockscreen : Fix widgets disabled (android_frameworks_base)
Fix ringer mode being unneededly changed by setting ringer mode volume to 0. (android_frameworks_base)
Squashed commit of A/V changes from CodeAurora (android_frameworks_av)
Also take into account that the i9300 is a tough nut to crack, because of samsung, and the guys at AOSP and CM are working for FREE and are making all they can to support and develop all that samsung does not give to the community.
As for me I love CM, but don't use it in my i9300 (occasionally make a nandroid backup and do a clean install of CM just for fun and testing) but I do in my Nexus 7 and i9000.
Also always remember that without a logcat almost no one will take you serious, I'll try to reproduce your issue in todays nightly and see if I get the camera issue, I'm no dev but I'll do whatever is needed to see CM work as it should.
Solaris_irc said:
Hi aharnick2013,
The last nightly I tried for CM10.1 was 06/17/2013 and the camera was working fine, apart from the usual audio bugs and poor camera performance.
I'm not sure about AOKP and AOSP, but for what I see in the CM changelogs, some parts of the sensor drivers in the kernel will be back ported from a previous release for the nightly of 06/20/2013, not sure if this has to do with the issue you are having as I never experienced myself in CM.
To be included in next nightly:
Derp fix. (android_frameworks_base)
Hide navigation ring if no targets are configured. (android_frameworks_base)
Cleanup. (android_frameworks_base)
Close notification panel when swiping away the last clearable notification. (android_frameworks_base)
Add media-caf repository (android)
u1: port sensors and modem interface from smdk4210 kernel (android_kernel_samsung_smdk4412)
Camera: Add a GPS indicator (android_packages_apps_Camera)
Check and fail early if requested wallpaper size exceeds maximum texture size. (android_frameworks_base)
Lockscreen : Fix widgets disabled (android_frameworks_base)
Fix ringer mode being unneededly changed by setting ringer mode volume to 0. (android_frameworks_base)
Squashed commit of A/V changes from CodeAurora (android_frameworks_av)
Also take into account that the i9300 is a tough nut to crack, because of samsung, and the guys at AOSP and CM are working for FREE and are making all they can to support and develop all that samsung does not give to the community.
As for me I love CM, but don't use it in my i9300 (occasionally make a nandroid backup and do a clean install of CM just for fun and testing) but I do in my Nexus 7 and i9000.
Also always remember that without a logcat almost no one will take you serious, I'll try to reproduce your issue in todays nightly and see if I get the camera issue, I'm no dev but I'll do whatever is needed to see CM work as it should.
Click to expand...
Click to collapse
Thanks, I just found a fix for AOSP roms. Flash Siyah kernel 1.9.1 after installation and boot of AOSP rom then reboot = Camera working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paranoid Android 3.69
Latest version: July 30
Description
Paranoid Android 3.69 for Sony Xperia Ray.
This is the first and only Android rom to feature true Hybrid mode.
This rom lets you scale and project every app, every widget, even systemcomponents individually.
Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course.
Apps have the capability to switch into various designs or layouts according to the device they run on.
This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size.
You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to.
You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot.
You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode.
Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself.
This project will entirely transform your device, but retain the aesthetics and the feel of your phone.
Click to expand...
Click to collapse
Features
- Android AOSP 4.2.2
- Halo
- PIE
- Customisability
- Some CM additions (eg. performance menu, filemanager)
- Custom kernel based on nAa 3.4.x and Mikeionna sources (LegacyXperia)
Install
- Flash zip and boot.img from zip
- Flash gapps (for CM-10.1, you can use OTA app)
- Reboot
Download
http://www.mediafire.com/?k9kfnlwwqccjk
Changelog
July 30
- Update to latest and fixes
July 25
- Update to latest and fixes
July 23
- Latest updates from legacyxperia, cm and PA (should also fix low memory killer issuess)
- New bootlogo
Click to expand...
Click to collapse
July 19
- Synced latest sources (PA, CM additions and legacyxperia)
- Added exchange and email again
- Some stuff i dont remember I did last week.
Click to expand...
Click to collapse
July 15
- Added USB mass storage option (go to Storage -> Menu and choose)
- Latest PA and CM additions (noticable is the new Halo helper window)
- New default wallpaper
- Goodbye not working panorama (removed button in camera)
- Fixes and some changes in build.prop
Click to expand...
Click to collapse
July 11
- Switched to TWRP 2.6.0.0
- Wifi hotspot fixed
- Superuser fixed
- New wifi drivers
- Front cam fixed
- Bug fixes
Click to expand...
Click to collapse
July 5
-Recovery update 6.0.3.3
-Kill all recent apps button added (leaves last one running as this is the app last opened)
-ParanoidWallpapers
-Removed live wallpapers (nobody uses them anyway, if you want them push them from one of the older zips)
-New PA default wallpaper
-Kernel build with linaro 4.7.4 (prev google toolchain)
-Rom build with google gcc 4.7 (prev 4.6)
-New default user image more appropriate for paranoid android
-Adjusted settings background a little
-Small improvements and bug fixes
Click to expand...
Click to collapse
July 2
- Wifi Fixed
- Performance options fixed
- Tweaked CM and PA
- Enable deadline in kernel
- Small fixes
Click to expand...
Click to collapse
July 1
-Audio & Gps FIXED
-Some more CM stuff (not too much, filemanager,dsp,torch)
-Own compilation of kernel
-Rebuild from scratch and some bug fixes
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
General Changelog
PA
https://plus.google.com/107979589566958860409/posts
Click to expand...
Click to collapse
CM
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z
Click to expand...
Click to collapse
LegacyXperia
https://github.com/LegacyXperia/local_manifests/wiki/Changelog
Click to expand...
Click to collapse
Known issues
- Camera: Panorama removed, 8MP is stretched and HDR is very sensitive (need to hold it perfectly still)
- Offline charging doesn't work. Charge with system on.
- FM
Press thanks if you like this or donate if you love it :victory:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
is it stable for daily use? just like taking a picture, instagraming , or line with friends?
thanks i gitta try it
WOW!! I always wanted the latest PA ROM for our Ray. Thank you thomas1991_12.
gellery, camera FC ... no music app :/
this is what i've been waiting for! i believe that one day you will come and bring some surprise, this is it! this is the day! thanks
if i use FlyKernel 3 this rom works or not? i prefer Flykernel than nAa's kernel
Flykernel 3 may work not 100% sure. But NaA kernel has been updated more. I would suggest that.
Camera works here, so does gallery. (only stretched in 8mp mode, 6mp is normal). Try clearing data in settings->app).
There is no music app yet, im trying to keep it as light as possible, but ill consider adding a default one.
thomas1991_12 said:
Flykernel 3 may work not 100% sure. But NaA kernel has been updated more. I would suggest that.
Camera works here, so does gallery. (only stretched in 8mp mode, 6mp is normal). Try clearing data in settings->app).
There is no music app yet, im trying to keep it as light as possible, but ill consider adding a default one.
Click to expand...
Click to collapse
yes gallery and camera working now somehow
wifi seems fine too ... maybe i will install apollo music player, and some file manager too.
one more problem: its not showing content of sd card when i connect mobile to pc.
This has probably been the lightest ROM I have installed yet. Very impressed with the performance without having to OC although I have done so out of habit. I am using Mike's kernel from his 10.1 ROM and I tried both releases of this ROM from the past two days last night.
Wi-Fi has not worked on either ROM version while using Mike's kernel and I even tried the emulator but it said that the wifi file could not be loaded. In your new update from last night there is NO emulator installed! :silly: I am not familiar with using ADB so cannot comment.
The camera has been the best 4.2 camera of any ROM. Preview is normal, menus all work and HDR doesn't cause a FC.....kinda haha. On your original release HDR would take its necessary three shots and then after some processing save a singular compiled image. The newest release 20130701 saves all three images and after processing saves a fourth that is grey and cannot be viewed. This also caused a force close once but after that it hasn't.
Video recording is a bit different since it doesn't provide quality settings based on resolution but on quality (480p, 720p vs low, medium, high). With the setting on High quality I took a short video and didn't have any problems when it saved it and then replaying the clip.
I prefer that you set the Nexus wallpaper as default as opposed to a CM wallpaper like on the latest release. Due to not having Wi-Fi access I was unable to download any apps since I currently have no 3G Data allowance on the test SIM. My primary SIM is in my other phone and is a micro-SIM so won't fit in the Ray. I could not test audio playback as unable to download a player at this time.
I'd like to recommend that the stock browser be included in the ROM as it is a light browser works very well and can be removed if someone would rather use Chrome or Opera.
I apologise for the long and wordy post. Sometimes hard to be concise while providing as much detail as possible. I will update my feedback as I test more features.
Thank you for what looks like a VERY promising and exciting ROM :good:
shorinryu said:
This has probably been the lightest ROM I have installed yet. Very impressed with the performance without having to OC although I have done so out of habit. I am using Mike's kernel from his 10.1 ROM and I tried both releases of this ROM from the past two days last night.
Wi-Fi has not worked on either ROM version while using Mike's kernel and I even tried the emulator but it said that the wifi file could not be loaded. In your new update from last night there is NO emulator installed! :silly: I am not familiar with using ADB so cannot comment.
The camera has been the best 4.2 camera of any ROM. Preview is normal, menus all work and HDR doesn't cause a FC.....kinda haha. On your original release HDR would take its necessary three shots and then after some processing save a singular compiled image. The newest release 20130701 saves all three images and after processing saves a fourth that is grey and cannot be viewed. This also caused a force close once but after that it hasn't.
Video recording is a bit different since it doesn't provide quality settings based on resolution but on quality (480p, 720p vs low, medium, high). With the setting on High quality I took a short video and didn't have any problems when it saved it and then replaying the clip.
I prefer that you set the Nexus wallpaper as default as opposed to a CM wallpaper like on the latest release. Due to not having Wi-Fi access I was unable to download any apps since I currently have no 3G Data allowance on the test SIM. My primary SIM is in my other phone and is a micro-SIM so won't fit in the Ray. I could not test audio playback as unable to download a player at this time.
I'd like to recommend that the stock browser be included in the ROM as it is a light browser works very well and can be removed if someone would rather use Chrome or Opera.
I apologise for the long and wordy post. Sometimes hard to be concise while providing as much detail as possible. I will update my feedback as I test more features.
Thank you for what looks like a VERY promising and exciting ROM :good:
Click to expand...
Click to collapse
Thank you for testing. Emulator will be included in next release, i forgot the CM packages with the july 1 release
Wifi does work but only when you load wifiload manually, im trying to fix that as we speak. (highest priority)
You are right about HDR, hadnt noticed that bug. Ill try to figure that one out too, but first wifi. Wallpaper is personal so I wont change the default one probably. How do you mean the stock browser? It is already included..
EDIT:
HDR is not a bug. It will fail if you don't hold the device very stable. If you keep it stable or in a tripod it will succeed and delete the 3 intermediate images and leave you with the hdr image.
WiFi worked for me with the included kernel. I had no sound when I played video.
I might have installed some modules ... Don't remember as I had to restore a back up and did not stay on the ROM for very long. Liked what I saw though
Sent from my Xperia Ray using xda premium
thomas1991_12 said:
Thank you for testing. Emulator will be included in next release, i forgot the CM packages with the july 1 release
Wifi does work but only when you load wifiload manually, im trying to fix that as we speak. (highest priority)
You are right about HDR, hadnt noticed that bug. Ill try to figure that one out too, but first wifi. Wallpaper is personal so I wont change the default one probably. How do you mean the stock browser? It is already included..
EDIT:
HDR is not a bug. It will fail if you don't hold the device very stable. If you keep it stable or in a tripod it will succeed and delete the 3 intermediate images and leave you with the hdr image.
Click to expand...
Click to collapse
Sorry about the browser thing. I must be going blind since I seemed to have missed that icon!! It is there and was merely an oversight by me.
I tried testing HDR again as you said but still no luck. Even holding it against a table it would take the images and then camera force closed each time as it was processing the HDR image. I will test some more today and flash previous version. Maybe I can generate a logcat or something to document the issue.
UPDATE:
Using latest release and have found the following:
Wifi works perfectly now and I haven't noticed any signal drops or other related issues.
Camera HDR has the same issue but I tried something as a possible workaround. I bumped up the CPU to 1.4GHz OC and tested it out. On the very first release it managed to more consistently save the image without any FC's. This by simply holding the phone carefully and not stabilising it further with a table or some similar assistance. However on the newest release doing didn't quite work and I was not able to hold the phone still enough for it to save the final image.
Initially Google Now kept crashing but that was because it required updating although initially google voice search was not present under "My Apps" on the Play Store.
I downloaded Rocket Player and music sounds great. It used its own sound enhancer though so not sure if DSP is fully functional.
Bluetooth file sharing works but I do not own a headset to test connectivity.
Halo works great with some niggling nuances. Whatsapp is possibly not completely compatible because aside from responding to messages I cannot attach files like images through Halo. Need to open main app. Taking a screenshot gets recorded as an activity within Halo and as a result takes a little longer than expected to complete. Also it seems that the gallery does not update since after taking the screenshot I can not see the images. However if I take another and access the gallery through Halo I can see my recent screenshots all present.
Update 2:
Offline charging doesn't work as normal. When phone is turned off and I connect to charger the phone boots up fully into OS. Does not remain at kernel state with charging animation.
shorinryu said:
Sorry about the browser thing. I must be going blind since I seemed to have missed that icon!! It is there and was merely an oversight by me.
I tried testing HDR again as you said but still no luck. Even holding it against a table it would take the images and then camera force closed each time as it was processing the HDR image. I will test some more today and flash previous version. Maybe I can generate a logcat or something to document the issue.
UPDATE:
Using latest release and have found the following:
Wifi works perfectly now and I haven't noticed any signal drops or other related issues.
Camera HDR has the same issue but I tried something as a possible workaround. I bumped up the CPU to 1.4GHz OC and tested it out. On the very first release it managed to more consistently save the image without any FC's. This by simply holding the phone carefully and not stabilising it further with a table or some similar assistance. However on the newest release doing didn't quite work and I was not able to hold the phone still enough for it to save the final image.
Initially Google Now kept crashing but that was because it required updating although initially google voice search was not present under "My Apps" on the Play Store.
I downloaded Rocket Player and music sounds great. It used its own sound enhancer though so not sure if DSP is fully functional.
Bluetooth file sharing works but I do not own a headset to test connectivity.
Halo works great with some niggling nuances. Whatsapp is possibly not completely compatible because aside from responding to messages I cannot attach files like images through Halo. Need to open main app. Taking a screenshot gets recorded as an activity within Halo and as a result takes a little longer than expected to complete. Also it seems that the gallery does not update since after taking the screenshot I can not see the images. However if I take another and access the gallery through Halo I can see my recent screenshots all present.
Update 2:
Offline charging doesn't work as normal. When phone is turned off and I connect to charger the phone boots up fully into OS. Does not remain at kernel state with charging animation.
Click to expand...
Click to collapse
Thanks for extended test.
- HDR shows no errors (doesnt FC for me btw) and most of the times it succeeds when I tried if I hold it very still. I maybe will eventually look into it to see if I can improve that.
- Google Now does work, at least here. Maybe it was just the update thing. So no bug either if I understand correctly.
- Halo isn't something im going to mess with, it is exactly the same as in source PA. Im sure it has it limitations, but in general I find it very useful :cyclops:
- Offline charging does not work indeed. Hadn't noticed it, not a major issue I think but I will put it on bug list.
Thanks!
BTW: Im currently switching over kernel building to linaro 4.8 and im trying to fix the 8mp stretched camera.
thomas1991_12 said:
Thanks for extended test.
- HDR shows no errors (doesnt FC for me btw) and most of the times it succeeds when I tried if I hold it very still. I maybe will eventually look into it to see if I can improve that.
- Google Now does work, at least here. Maybe it was just the update thing. So no bug either if I understand correctly.
- Halo isn't something im going to mess with, it is exactly the same as in source PA. Im sure it has it limitations, but in general I find it very useful :cyclops:
- Offline charging does not work indeed. Hadn't noticed it, not a major issue I think but I will put it on bug list.
Thanks!
BTW: Im currently switching over kernel building to linaro 4.8 and im trying to fix the 8mp stretched camera.
Click to expand...
Click to collapse
Glad I could help. I don't need to worry about my phone working all the time since I got a new one so wanted to help development as much as I could.
HDR could be because I may have dropped the phone one too many times perhaps the phone is overly sensitive or something.
I love the usefulness of Halo definitely. Guess will just be patient and wait for future improvements by the PA team.
I haven't found a major bug as you said. You've done a great job and this can only get better. Keep it up! I look forward to testing further and good luck with updating the kernel
Sent from my LT26i using xda app-developers app
Sorry for a noob question but I don't have any idea how to set up HOLO ? it can't handle any of my notifications.
Also seems like the wifi tethering doesn't work for me.
Sent from my Xperia Ray using xda app-developers app
djocqer said:
Sorry for a noob question but I don't have any idea how to set up HOLO ? it can't handle any of my notifications.
Also seems like the wifi tethering doesn't work for me.
Sent from my Xperia Ray using xda app-developers app
Click to expand...
Click to collapse
For Halo check that you enabled it first. In the notification bar when you swipe it down there is a small icon next to the tiles button. A circle with a chat box on it. That turns Halo on. Halo settings can be found under the Settings within Toolbars I believe.
Sent from my LT26i using xda app-developers app
shorinryu said:
For Halo check that you enabled it first. In the notification bar when you swipe it down there is a small icon next to the tiles button. A circle with a chat box on it. That turns Halo on. Halo settings can be found under the Settings within Toolbars I believe.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
yups, the first thing i do after flashing this ROM is activated HALO in the notification bar, but till now it do nothing . You have any idea ?? i really curious about this feature
djocqer said:
yups, the first thing i do after flashing this ROM is activated HALO in the notification bar, but till now it do nothing . You have any idea ?? i really curious about this feature
Click to expand...
Click to collapse
Notificiations should go to halo, like for example an incoming whatsapp message wil appear in the halo circle which can be touched and it will open whatsapp in a small overlay window.
thomas1991_12 said:
Notificiations should go to halo, like for example an incoming whatsapp message wil appear in the halo circle which can be touched and it will open whatsapp in a small overlay window.
Click to expand...
Click to collapse
Yes just as thomas1991_12 pointed out you need to receive a message or notification to occur for Halo to show up. Try taking a screenshot, I found that the notification that occurs from doing that triggers Halo.
Sent from my LT26i using xda app-developers app
Hey guys, sad announcement unfortunately.
I knew it was coming soon, since they were actively blocking my mods. I just received a cease and desist letter from Snapchat's lawyers for infringement of their intellectual property. And they're right, I am infringing their intellectual property. I won't be taking any further risks and will comply with their requirements to settle. I have and am going to remove everything, including SnapMod, Keepchat and Snapshare.
It's been a fun ride. I really loved developing it and really improved my skills. But I knew it had to stop some time. I understand they're not happy with it and there's no other option than to honour their requests. I'm going to think of something else to develop, of course it'll be open source. Something like an app (don't know what yet) or rom development for example. New challenges, new things to learn.
I'm going to remove everything from AndroidFileHost and the Xposed repository, ask the mods to close this thread and remove it after a few days, when most of you have had the chance to read this message.
I'm really sorry guys, I hope you understand I have to quit. I do understand them. Thanks for being such a loyal community.
P1nGu1n
XDA:DevDB Information
Snapshare, Xposed for all devices (see above for details)
Contributors
P1nGu1n_, amcgavin and stammler
Xposed Package Name: com.p1ngu1n.snapshare
Version Information
Status: Stable
Current Stable Version: v2.5.1
Stable Release Date: 2015-01-03
Created 2014-07-14
Last Updated 2015-02-10
Changelog
Changelog
Updates can be downloaded from Xposed Installer.
Note: uninstall any version created by stammler or amcgavin, package name has changed!
v2.5.0 - 2015-01-03
Fixed sharing video not working (caused by a library not being added to the APK while compiling, reported by @ALI 9)
Unlimited captions: added ability to insert new lines by pressing enter
v2.5.0 - 2014-12-31
Unlimited captions! It's turned off by default, enable them in Snapshare settings. They aren't just for shared snaps, they work for every send snap!
v2.4.2 - 2014-11-15
Fix rare bug for not taking the rotation matrix into account when an .mp4 already contained one causing wrong rotation
Improvements in image rotation in specific cases
Small internal improvements
v2.4.1 - 2014-10-12
Fixed sharing not always working the first time
Support for the latest betas (v5.0.36.0+)
v2.4.0 - 2014-09-01
Take the Exif-data's orientation flag into account
Many internal changes and improvements (see GitHub for every change)
v2.3.0 - 2014-08-21
Video rotation: rotate videos based on the resolution
Renamed 'Image rotation mode' to 'Media rotation mode', because of the added video rotation functionality
A dialog is shown when this module isn't enabled in Xposed installer
Donate and Support button added to the About section
Internal improvements
v2.2.0 - 2014-07-29
Added support for Snapchat v5.0.32.1
Snapchat now opens in a new task when sharing, instead of in the app you were sharing from
Added a warning when a shared video is over 2.5 MB, because this maximum supported by Snapchat
Huge internal changes and improvements
v2.1.0 - 2014-07-15
Added support for a different sharing format (mostly used by file managers)
v2.0.0 - 2014-07-15
Added support for the latest version: v5.0.23.0 to 5.0.27.3 (no more drawing issues)
Added option to hide the icon from the launcher
Added option to disable debugging
Added option to choose your rotation mode (CW, CCW or none)
New icon
Code cleanup and refactoring
Previous versions released by stammler and amcgavin:
Code:
1.6.6a
-- Added compatibility for snapchat 5.0.9.1
1.6.6
-- Added compatibility for snapchat 5.0.2 Please check here for details regarding videos
1.6.5
-- Added compatibility for snapchat 4.1.12
1.6.3
-- Added compatibility for snapchat 4.1.10
1.6.2
-- Fixed another bug that corrupted original videos, added GB compatibility - use at own risk!
1.6.1
-- Fixed a bug that corrupted original videos
1.6
-- Added preferences. You can now choose if an image rotates, and whether it will crop or scale.
1.5.2
-- Fixed a bug which didn't attempt to try to work for newer versions.
1.5.1
-- Support added for new beta versions.
1.4
-- Functionality is now the same as it were for previous versions.
1.3
-- Fixed to work for newer versions of snapchat. (barely)
1.2
-- Proper handling of video deletion.
1.1a
-- Fixed version to work with newest Snapchat version 3.0.4
1.1
-- Support for sharing videos added.
So far only Portrait videos are supported, as Landscape videos are shown scaled down in Portrait mode in the upper half of the screen.
Also, if the video is too large, which can happen quickly if recorded with an external app, Snapchat will refuse to send the video. I actually don't even now if you can share any other videos than the ones originally created with Snapchat and saved before sending. Or videos saved by the Keepchat mod.
1.0
-- First working release. Only image sharing supported.
Reserved
Works perfectly! THANK YOU!
Works perfectly on Galaxy S4 - Android 4.4.2 Stock
working on latest version
thanx !
Working great on C-RoM 6.6 (Android 4.4.2) d2tmo, thanks! Also wanted to say I like the new icon. :good:
THANK YOU SO MUCH!!!! Been waiting a long time for this
Nice work !
Sent from my SM-G900F using XDA Premium 4 mobile app
Thank you thank you thank you! Especially love the option to choose my rotation direction!
2.0.0 released
This is the same as the last beta as no problems were reported.
The update can be downloaded from Xposed Installer.
Changelog:
Added support for the latest version: v5.0.23.0 to 5.0.27.3 (no more drawing issues)
Added option to hide the icon from the launcher
Added option to disable debugging
Added option to choose your rotation mode (CW, CCW or none)
New icon
Code cleanup and refactoring
Please report what you think about this module and what improvements you would like to see.
Everyone thanks for the feedback you gave!
SportingChap said:
Working great on C-RoM 6.6 (Android 4.4.2) d2tmo, thanks! Also wanted to say I like the new icon. :good:
Click to expand...
Click to collapse
Thank you, I think it fits the application better
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
Click to expand...
Click to collapse
Three questions:
Does it help when you try to share it the second time?
Using Snapshare v2.0.0 stable I assume?
Which Snapchat version are you using?
P1nGu1n_ said:
Three questions:
Does it help when you try to share it the second time?
Using Snapshare v2.0.0 stable I assume?
Which Snapchat version are you using?
Click to expand...
Click to collapse
I've tried a few more times and it works now.
Yes I'm using snapshare 2.0.0 and the snap chat version is 5.0.27.3
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded.
Click to expand...
Click to collapse
Mine didn't actually load the image the first time. I figured it was because I hadn't opened Snapchat in a long while (i.e. wasn't running in the background). After I backed out and re-shared the image to Snapshare a second time, it worked perfectly.
Maybe that counts as a bug. Whoops...
Edit: Duplicated in both the beta and the new 2.0 stable, Snapchat 5.0.27.3.
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
Click to expand...
Click to collapse
Same here, I tried backing out and sharing again 3-4 times but it just loads the camera. Tried different photos and same thing :/
I am not able to share videos.
Sprint Note 3
Sent from my SM-N900P using XDA Free mobile app
alvinpck said:
I am not able to share videos.
Sprint Note 3
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
yup can confirm but my logcat doesn't want to launch so i can't log
I'm not able to share an image either. I just get the camera. Latest stable version of snapchat and module.
tillward said:
I'm not able to share an image either. I just get the camera. Latest stable version of snapchat and module.
Click to expand...
Click to collapse
geoff5093 said:
Same here, I tried backing out and sharing again 3-4 times but it just loads the camera. Tried different photos and same thing :/
Click to expand...
Click to collapse
SportingChap said:
Mine didn't actually load the image the first time. I figured it was because I hadn't opened Snapchat in a long while (i.e. wasn't running in the background). After I backed out and re-shared the image to Snapshare a second time, it worked perfectly.
Maybe that counts as a bug. Whoops...
Edit: Duplicated in both the beta and the new 2.0 stable, Snapchat 5.0.27.3.
Click to expand...
Click to collapse
I have it too, I'll look into it, but it's strange. I thought it did occur in previous versions by amcgavin too.
It occurs when Snapchat hasn't been opened (in a while), however the second time I share it always works.
alvinpck said:
I am not able to share videos.
Click to expand...
Click to collapse
keyra74 said:
yup can confirm but my logcat doesn't want to launch so i can't log
Click to expand...
Click to collapse
I found out that for example file managers share videos in a different manner. I added support for that, I hope that solves your problem. That version will be released in several minutes. Please test it and report back.
If it doesn't solve your problem, please enable debugging in settings and share your Xposed Log with me.
OmniROM for T900 Only
installation:
install custom recovery TWRP: http://forum.xda-developers.com/showthread.php?t=2679825
install omnirom with recovery
install gapps (optional): http://forum.xda-developers.com/showthread.php?t=2397942
for root flash zip file with recovery: http://download.chainfire.eu/589/SuperSU/
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
not working:
camera
buttons backlight
download links:
R2 https://yadi.sk/d/ACdFgx9zcaGfz
XDA:DevDB Information
OmniROM, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
bonuzzz, Valera1978, arcadia2uk
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2014-11-05
Created 2014-11-05
Last Updated 2014-11-08
Reserved
Latest update: 11082014 2.30pm EST
Thank you bonuzzz and Valera1978. This OmniROM directly built from source is out of the box the smoothest and reactive ROM I've seen on the T-900, and it's also fully Open Source AOSP. I have been fortunate to run this version in alpha and beta over the past 4 or 5 days and I have not seen any extraordinary issues with the release., on the contrary it's the most reactive ROM currently existing for the T-900.
Note for v.2 - Be very patient in flashing v2, from that system format starts in TWRP until extraction kicks in there's currently a delay of up to 3 minutes
Just as under the SM-T900 cm11 tread, I have performed some functionality testing of the device and some extra features, they are shown below as working, not working or not tested. The functionality grid was developed based on weaknesses in earlier AOSP builds and ports for the large format Samsung Tab/Note Pro family:
- mtp - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark USB debugging notify.
- adb
- External SD - working out of the box
- Ext4 SD card mounting on external SD card - Unfortunately, I don't have a free SD Card to test with, if someone is interested in performing the test and report back it would be great, but theoretically it should work
- USB OTG including USB storage
- Off-mode charging
- Encryption - failed restoration of encrypted backup data in TWRP 2.8.1.1, but this must be a TWRP issue - Encryption process in ROM takes about an hour to perform, if someone is interested in performing the test and report back it would be great, but theoretically it should work
-----------------------------------------
- Lid sensor
- IR blaster - I've used IR2.0
- OC settings - located in Settings/Performance/ if you swipe right between the grids a"power menu" is shown where a multitude of performance settings and information is available, most of them currently not used.
- Advanced reboot - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/. Check mark Advanced reboot.
- Screen Rotation only seem to react if the app has a default setting. You can use the Set Orientation, or the Ultimate Rotation Control app to pick the rotation you desire.
-----------------------------------------
- Play Store
- Google Play movies download and playback
- Google Play streaming Movies & TV
- DRM - tested with Audible, Google Books and Amazon Kindle
-----------------------------------------
- Zona
- Popcorn Time - need upgrade to latest version 2.3 beta, includes built-in VPN and Chromecast support with subtitles, earlier version timed out
- YouTube 1080p playback - 1440p will work w. v5.9.0.12, but I believe this to be a false positive
- Netflix
-----------------------------------------
- Chromecast with #MirrorEnabler hack, allowing for screen cast
- MHL connector
- Miracast
-----------------------------------------
- Capacitive lights - I assume this is the backlights for the capacitive buttons
- Capacitive keys
- Home button - correct function performed
- Brightness manual + auto
- Vibrator
-----------------------------------------
- GPS lock and voice directed navigation
- WiFi both 2.4 GHz & 5 GHz are working
- Bluetooth
- Microphone
- Audio on both speakers
- Headphones
-----------------------------------------
- Camera - in progress the camera "works", but does not allow for single shots to be taken, and crashes in video mode, but panorama shots are working
- Torch as of v2
- Camera Sensors as of v2
-----------------------------------------
- Xposed Framework and modules - need re-initialization after each boot (common to all cm ROM's)
- Superuser - installation of SuperSU from TWRP is recommended - make sure to enter into SuperSU settings and execute "Install SuperSU backup script", under the CUSTOM ROM label, before re-flashing a ROM update.
- Hangouts Dialer phone calls via Hangouts
-----------------------------------------
All fixes are in progress and will hopefully be sorted out in the new upcoming release
The following are standard limitations and options for OmniROM:
Write access to your external SD-card works out of the box, but just in case i suggest to d/l JRummy's SD KitKat Fixer
init.d support also works out of the box, otherwise d/l Uni-init by Ryuinferno.
If you think to much heat is building up use Performance/Governor set to ondemand, or conservative and I/O Schedduler to bfq, in addition to increase battery time you can set Wi-Fi/Advanced/Keep Wi-Fi on during sleep/ to Only when plugged in and make sure the Wi-Fi/Advanced/Wi-Fi optimization/ is checked and reduce Display/Sleep/ to below 1 minute. You can also use some apps to improve battery eg Easy Battery Saver, or the more sophisticated AutoCon+ Save Battery & Data and and to put hanging apps to hibernation Greenify that I believe require Xposed Installer. To improve charging time, you can use an app eg Faster Charger. Finally, I have also used PurePerformances in order to further improve the performances and VIPER4AndroidFX to allow for louder speaker sound and enhanced listening experience.
new version is released. sensors are fixed. camera is not working yet
I have read about, and been curious about, omnirom for a long time now. I love this tab smt 900 but have not had a lot of luck with development so far. I am a tinkerer, i like to flash a rom, tweak to my satisfaction and run it for a long time. I will stay here for a few days to see if it gains speed and these issues are fixed. If so, it looks like a great daily driver. Currently running the cm build that @arcadia2uk helped with. THANK YOU ALL for your efforts and contributions so people like me can have so much fun. Looking forward to it.
bonuzzz said:
new version is released. sensors are fixed. camera is not working yet
Click to expand...
Click to collapse
Be very patient in flashing v2, from that system format starts in TWRP until extraction kicks in there's currently a delay of close to 3 minutes. Also, if you plan on a dirty flash; make sure to enter into SuperSU settings and execute "Install SuperSU backup script" under the CUSTOM ROM label before flashing.
OmniROM Now Booting on Android 5.0 Lollipop!
from xda article
OmniROM has officially become the first large-scale custom ROM distribution to merge and successfully boot Android 5.0 Lollipop. The initial boot was performed with the Nexus 7-2013
More details in main Omni Lollipop thread.
Does this rom have multi window?
Quantra said:
Does this rom have multi window?
Click to expand...
Click to collapse
MultiWindow was removed from OmniROM in the spring of 2014. However, the former split view feature now exist as the Xposed module: XMultiWindow. There is also
Valera1978 said:
Additional:
Multi-Windows:
1. Install Xposed framework: download apk from http://repo.xposed.info/module/de.robv.android.xposed.installer
run apk, launch it, go to framework and press installupdate, then reboot. Alow root if ask.
2. Install XHaloFloatingWindow module: open Xposed framework, go to download section and search XHaloFloatingWindow (just type Halo), open XHaloFloatingWindow, swipe to left - and press download on latest version
3. Activate XHaloFloatingWindow module: open Xposed framework, go to Modules and check XHaloFloatingWindow, then reboot. Allow root if ask.
4. Open XHaloFloatingWindow - you can leave all by default, but:
- Popup WindowPopup Dim set to 0
- Popup Behavior - check "Force New Windows in Halo"
5. Install MultiWindow Sidebar: download apk from http://forum.xda-developers.com/showthread.php?t=2729450
6. run MultiWindow Sidebar:
- Check "Start on Boot"
- In "Select Apps" - add your apps
- In "Drag Launch Mode": select ParanoidAndroid Halo
- In "Tap Launch Mode": selecrt ParanoidAndroid Halo
then reboot and enjoy.
Click to expand...
Click to collapse
Personally, I'm using XHaloFloatingWindow together with Floatifications and it works very well in landscape mode (I have not tried in portrait).
arcadia2uk said:
MultiWindow was removed from OmniROM in the spring of 2014. However, the former split view feature now exist as the Xposed module: XMultiWindow. There is also
Personally, I'm using XHaloFloatingWindow together with Floatifications and it works very well in landscape mode (I have not tried in portrait).
Click to expand...
Click to collapse
That is the exact setup I am using on the SM T900. XHalo and Floatifications. It is close to halo on PA. I am on the cm 11 ROM but I am confident the ROM is irrelevant as to functionality.
I'm a huge fan of OmniROM and very happy to have it on my T900.
I'm shocked this project hasn't gathered more interest, CM is becoming convoluted while Omni, strictly IMHO, is generally a lighter/cleaner ROM.
bonuzzz said:
OmniROM for T900 Only
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
Hello All,
I a thinking about replacing Wookie ROM with Omni ROM. Though before I do I was wondering if an R3 will be forthcoming and if so, when?
Click to expand...
Click to collapse
Tarkus56 said:
bonuzzz said:
OmniROM for T900 Only
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
Hello All,
I a thinking about replacing Wookie ROM with Omni ROM. Though before I do I was wondering if an R3 will be forthcoming and if so, when?
Click to expand...
Click to collapse
Good question... There is nothing to release. Onmi L is very unstable for this tab because it doesn't have support of exynos platform. I dont have enough time and patience to port everything to omni. So I recommend to take a look to CM11.
Click to expand...
Click to collapse
bonuzzz said:
Tarkus56 said:
Good question... There is nothing to release. Onmi L is very unstable for this tab because it doesn't have support of exynos platform. I dont have enough time and patience to port everything to omni. So I recommend to take a look to CM11.
Click to expand...
Click to collapse
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
Click to expand...
Click to collapse
Itchin'
I have been thinking about trying this OmniROM instead of CM12...the only thing holding me back is the lack of camera.
rkmFL said:
bonuzzz said:
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Will give it a test run...
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
That is good news. From page 1 it states backlight & camera not working. In this case, will give it a test run. Sounds like fun & thanks!:good:
P.S. Isn't the T900 the SWEETEST tablet you have ever put your hands on?!?!?
Reporting back...
Hi,
I installed OmniROM and was immediately pleased with 1 thing in particular...OmniROM's brightness level (on the brightest level), seemed to be brighter than CM12. I liked the status bar mods (network in / out counters), date / time mods but would nice to be able to adjust colors indepently and also support theming. The camera works fine. I do have issues with auto rotation and hard keys backlight don't illuminate. Other than these 2 items, the ROM boots very fast, stable & responsive. Great job & will keep an eye out for updates. I am happy to be a test / data point and will be running OmniROM as my daily driver for the time being.
Kind Regards,
Jason Vincent
Sr Integration & Validation Engineer
VoIP SME
Any reason why T320 is not have this ROM? Its Snapdragon based so I would have thought it would be easier.
The camera stopped working for me or perhaps wasn't working fully before. Any chance on an update that will fix camera?
Appreciate it...
Jessooca said:
use "Open Camera" it works great.
Click to expand...
Click to collapse
Appreciate the tip.
I actually went back to CM12 but miss a lot of things about OmniROM. I am rather surprised there are not more custom ROMs available in general for the Tab Pro 12.2" (SM-T900) [Beanstalk, Slim, PAC, etc.]. You would think there would be given the greatness of this tablet regarding size and performance. I keep patiently hoping and waiting with optimism.
Oxygen OS OP6 OB30 Q port for Poco F1
uhm...
What works?
- RIL, Calls, Dual Volte
- SMS, MMS
- Camera
- Bluetooth calls and audio
- Hotspot, Wifi
- Fingerprint
- Pretty much everything?
Known issues?
- Ambient and Lift-UP (not working)
- OPFaceUnlock (burh)
- Some other stuff?
How to flash?
- Get decrypted
- Flash miui pie firmware [91MB]
- Flash ROM
- Magisk optional
Reboot
Note:
- Change kernel if you have battery drain issue
- Uses oneplus thermals, so phone can get quite warm
- Don't mirror, I need to know the download numbers
- If you have fix, send em. I got exams to study for, and from now on for a few months, adil or vijay will might give updates.
Credits:
Adil and Vijay for support and help with some fixes
Shivatejapeddi for some major fixes
Shahan_mik3 for kernel
Prajwal for some fixes
Erfan and Phh for some of their ideas and fixes
Download:
https://www.androidfilehost.com/?fid=4349826312261642902
MD5: de5c6d0687a2ca55555351ca97bbb5bc
Wanna buy me a coffee?
http://paypal.me/amog787
res
no ss
Wow finally a port that I've been dreaming about
Bug report with logs only
moderators,kindly delete this post.
thanks.
Thanks for the build. Downloading now.
Ambient and Lift-UP (fix it yourself, fixes available at t.me/oosmods)
Click to expand...
Click to collapse
One request: can you please post the fixes you mentioned in first post? I don't use telegram nor I've plans to use it. It would be great for users like us to get the fixes here instead of checking it on Telegram.
Good luck for your exams. :good:
Can you test 2 device bluetooth tethering, it is ok?
Before i got crash every i pairing new bluetooth device
stuck at boot animation
deathgame said:
stuck at boot animation
Click to expand...
Click to collapse
Try rebooting once again or reboot to recovery and format data
Mobile data isnt working,double tap to wake too.
Change kernel if you have battery drain issue
Click to expand...
Click to collapse
Which kernels could you please recommend? I tried NoGravity and Twisted, and still battery drains like crazy, about 15% per hour of usage
Daruwalla said:
Thanks for the build. Downloading now.
One request: can you please post the fixes you mentioned in first post? I don't use telegram nor I've plans to use it. It would be great for users like us to get the fixes here instead of checking it on Telegram.
Good luck for your exams. :good:
Click to expand...
Click to collapse
+1 even I would be happy if these are posted in the OP.
Try illusion latest, heard heats less
For heating and drain you can switch governor to conservative and modify parameters. Then switch back to shedutil. Runs fine for me, no heating or drain so far. It's just a workaround, but solves the problem temporary till reboot. I posted a guide on telegram channel.
Bugs so far:
-Kernel heating and drain because cores runs at highest frequency (use workaround)
-DT2W (fixed with second guide from op and automated with Tasker)
-Ambient display for notification
Awesome work and many thanks for your port !!!!
PS: Good enough for daily use for me. Good luck for your exams !
test video good work
https://www.youtube.com/watch?v=I09F4PXEU1s
amog787 said:
Try illusion latest, heard heats less
Click to expand...
Click to collapse
Try nogravity kernel best for both gaming and battery
What to do about that L3 DRM??
Any solution except changing the rom itself??
Ravindrasan said:
What to do about that L3 DRM??
Any solution except changing the rom itself??
Click to expand...
Click to collapse
Yay
Solved it:good:
OK, loved it but the battery drain is getting in the way...
Please suggest something..
Excellet ROM but particularly my banking app is not working even with Magisk hide. May be its not a famous bank that's why. But I have to use my banking app which is important to me so switched back to the Stock Miui.