installed AnTuTu and nothing the screen of my s3 began to feel a tinge of red, and already reinstalled the rom and did not work out.
help me. thank you
Change your kernel, or flash back to stock.
boomboomer said:
Change your kernel, or flash back to stock.
Click to expand...
Click to collapse
already tried and did not work out.
I think it's a problem on the GPU
Is it red in Odin or recovery mode? If so then you have a hardware problem.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Is it red in Odin or recovery mode? If so then you have a hardware problem.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I discovered the problem and on the LCD, I consulted a friend who technician.
600 dollars to fix, more thanks for the help
Related
what does that brickbug affect in galaxy s2 hardware?
Tefanym said:
what does that brickbug affect in galaxy s2 hardware?
Click to expand...
Click to collapse
There are a million and five threads about this on XDA.
It corrupts the EMMC chip, once corrupted you will need to replace the chip. Nothing can fix it.
can u tell me how much it costs to replace this chip?
so the motherboard and processor are both fine , and only this chip is gone?
Tefanym said:
can u tell me how much it costs to replace this chip?
so the motherboard and processor are both fine , and only this chip is gone?
Click to expand...
Click to collapse
there is a sticky thread for this issue under General section of this forum.
You will find it. Just search
Swyped from my Samsung Galaxy SII
excuse me , my phone doesnt't enter download mode nor recovery, is this the emmc faliure or motherboard one?
that was after wiping data of a 4.0.4 and i have used an app called sgs2 bootscreen chager by hellcati downloaded that app from playstore, after using it i got a boot loop,, so i tried to flash a couple of roms and ended up with aliance after that tried to install rootbox jb , but the instalation took much longer so i forced the phone into recovery again using the combination , after that my phone seems dead, so what happened and what should i do, please help me!!!:crying:
Tefanym said:
excuse me , my phone doesnt't enter download mode nor recovery, is this the emmc faliure or motherboard one?
that was after wiping data of a 4.0.4 and i have used an app called sgs2 bootscreen chager by hellcati downloaded that app from playstore, after using it i got a boot loop,, so i tried to flash a couple of roms and ended up with aliance after that tried to install rootbox jb , but the instalation took much longer so i forced the phone into recovery again using the combination , after that my phone seems dead, so what happened and what should i do, please help me!!!:crying:
Click to expand...
Click to collapse
You have to replace the whole motherboard - emmc is attached on it, and cannot be purchased/replaced separately.
and how much does this motherboard cost, i am out of warranty?
I wouldnt be surprised if Samsung wanted £200!.
If it were me Id buy a riff box kit rather than paying Samsung.
Sent from my GT-I9100 using xda premium
theunderling said:
I wouldnt be surprised if Samsung wanted £200!.
If it were me Id buy a riff box kit rather than paying Samsung.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
U can't use jtag to rescue a phone affected by this bug
Sent from my GT-I9100 using Tapatalk 2
bluefa1con said:
U can't use jtag to rescue a phone affected by this bug
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
so what will samsung actually do, if jtag cant help here?
Tefanym said:
so what will samsung actually do, if jtag cant help here?
Click to expand...
Click to collapse
Replace the whole motherboard
Sent from my GT-I9100 using Tapatalk 2
Well the problem started a while ago when my settings wouldn't work...so i restored my ROM(JEDI X) via a back up...and everything was good
Now i want to flash Pacman rom and it wont flash...
Next choice, Liquid Smooth, it wont flash
i just went flash wild trying to flash anything and everything but it keeps saying Failed in ugly red letters -_-
I just want to be able to flash something new, please help!
zaksween said:
Well the problem started a while ago when my settings wouldn't work...so i restored my ROM(JEDI X) via a back up...and everything was good
Now i want to flash Pacman rom and it wont flash...
Next choice, Liquid Smooth, it wont flash
i just went flash wild trying to flash anything and everything but it keeps saying Failed in ugly red letters -_-
I just want to be able to flash something new, please help!
Click to expand...
Click to collapse
I have the latest TWRP installed, i have tried a lot to try to fix this, please helpppp
STOP MAKING SO MANY THREADS. I answer only one of them. Jesus
Sent from my SCH-I605 using Tapatalk 2
maybe bad downloads try downloading them again and flashing
Bad sdcard. Move to internal and try again.
Sent from my SCH-I605 using Tapatalk 2
zaksween said:
Well the problem started a while ago when my settings wouldn't work...so i restored my ROM(JEDI X) via a back up...and everything was good
Now i want to flash Pacman rom and it wont flash...
Next choice, Liquid Smooth, it wont flash
i just went flash wild trying to flash anything and everything but it keeps saying Failed in ugly red letters -_-
I just want to be able to flash something new, please help!
Click to expand...
Click to collapse
You need a "triangle away" app maybe you have incurred the limit for flashing rom that's why your seeing the red line!!!
gelo20ify said:
You need a "triangle away" app maybe you have incurred the limit for flashing rom that's why your seeing the red line!!!
Click to expand...
Click to collapse
No.
Sent from my SCH-I605 using Tapatalk 2
1ManWolfePack said:
No.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
its the only just try it out... nothing to lose!!
gelo20ify said:
its the only just try it out... nothing to lose!!
Click to expand...
Click to collapse
Except there is no limit it's just a number and you don't trip or flashing in recovery. It only gets tripped by flashing non official Samsung firmware in Odin so I doubt his is higher then 1
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Except there is no limit it's just a number and you don't trip or flashing in recovery. It only gets tripped by flashing non official Samsung firmware in Odin so I doubt his is higher then 1
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
This^^
You (not kintwofan) don't know what you're talking about.
Sent from my SCH-I605 using Tapatalk 2
Hi,
I made a BIG mistake and i put the cwm for i9500 on my phone and now my touchscreen is not working. Do you guys think that it is possible that burned the digitizer?
1) I already inserted the right CWM after the mistake
2) Even with the stock rom the touch still not working.
Please help!
Try to wipe everything and flash again.. or return to stock
Sent from my HTC One X using xda app-developers app
Stefan0vic said:
Try to wipe everything and flash again.. or return to stock
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I alreeady tried ((
I dun think it actually burnt it. If flashing stock rom does not work, afraid u have to send it to service centre. Can u boot the phone atm?
Sent from my GT-I9300
correiaguilherme said:
Hi,
I made a BIG mistake and i put the cwm for i9500 on my phone and now my touchscreen is not working. Do you guys think that it is possible that burned the digitizer?
1) I already inserted the right CWM after the mistake
2) Even with the stock rom the touch still not working.
Please help!
Click to expand...
Click to collapse
Yes its F^^^^^ well known problem with wrong flash .
Yep, new touch screen required.
Sent from my GT-I9300 using Tapatalk
I got the S3 with Revoulution HD S5 (smartdroid) ROM with boeffla kernel.
Lately ive been getting random freezes just in the middle of doing nothing with my phone, it just freezes and then goes to reboot, while its trying to reboot it bootloops. With that i mean its trying to reboot then screen goes black and then it tries to reboot again.. Then i have to pull the battery out and insert it again and it works (for some time.)
So my question is how can i fix this and what is the problem? Ive read some posts saying that it could be the firmware? Well i have read alot of other posts but never really find any good soulution so please HELP!
/nkewk!
Can u get into recovery or download mode?
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Can u get into recovery or download mode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
both. The phone is working from time to time... Its just the freezes/reboots that are creeping me out..
Flash the latest official stock rom with odin, factory reset then test before you install or restore anything.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Flash the latest official stock rom with odin, factory reset then test before you install or restore anything.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
where can i find the latest official stock?
nkewk said:
where can i find the latest official stock?
Click to expand...
Click to collapse
sammobile.com
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
sammobile.com
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah, found it. Going completely stock now, without root also. Just going to try out the stock a while and see if it works. Then preferbly root and flash a custom rom again! Thanks.
JellyYogurt said:
sammobile.com
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i unrooted/went back to stock, then i rooted and flashed a new rom. Everything without a problem. I have only got 1 random reboot so far.. more suggestions??
If it still freezes and reboots on stock then you have bad memory blocks in your nand memory.
Sent from my GT-I9300 using Tapatalk
nkewk said:
i unrooted/went back to stock, then i rooted and flashed a new rom. Everything without a problem. I have only got 1 random reboot so far.. more suggestions??
Click to expand...
Click to collapse
Change your Kernel. I am using Revolution S5 without any issue. Better install LiteGX kernel. Do not play with Kernel if your knowledge is less. LiteGX is just a plug & play Kernel.
I got the same issue.
I´m on it. I will try latest official. You should check if your emmc chip is possible broken. Just load the app emmc check and google about "SDS S3"
I´ll post a solution if i can get it solved.
Greetings Dumbass
KSKHH said:
Change your Kernel. I am using Revolution S5 without any issue. Better install LiteGX kernel. Do not play with Kernel if your knowledge is less. LiteGX is just a plug & play Kernel.
Click to expand...
Click to collapse
just 1 reboot today.. I use boeffla, i dont really understand why it wouldnt work with boeffla..
Dumbass7 said:
I got the same issue.
I´m on it. I will try latest official. You should check if your emmc chip is possible broken. Just load the app emmc check and google about "SDS S3"
I´ll post a solution if i can get it solved.
Greetings Dumbass
Click to expand...
Click to collapse
after unrooting, and then rooting and reflashing the same rom again, i have only gotten 1 reboot today.. maybe its the battery ?
nkewk said:
after unrooting, and then rooting and reflashing the same rom again, i have only gotten 1 reboot today.. maybe its the battery ?
Click to expand...
Click to collapse
For your trouble shooting purpose..go back to stock Kernel and use it for few days
hello there, a friend of mine asked me to put CM 11 on his s3. He had stock 4.3(germany i guess) rooted. I flashed TWRP with Goomanager, wiped data,system,cache and dalvik then flashed the 10/05/2014 nightly with the gapps. The device power on just fine ,he installed a few apps from play store then he was playing around with the device when he locked it, then the device died.
What i tryed:
-wont enter recovery or download
-pulled the battery out pressed the power for 5s put it back in
-connected the charger then power on the device
Try a usb jig
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try a usb jig
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
now im trying to find one in my town
that wont work
In that case you have SDS, new motherboard required.
Sent from my GT-I9300 using Tapatalk
dany547 said:
that wont work
Click to expand...
Click to collapse
I think your friend played with something bad, did he use triangle away or overclocked cpu?
Cm11 has SDS fix and so does 4.3 stock... As advised your friend install something he shouldn't...
Sent from my GT-I9300 using Tapatalk
_Beni_ said:
I think your friend played with something bad, did he use triangle away or overclocked cpu?
Click to expand...
Click to collapse
f0xy said:
Cm11 has SDS fix and so does 4.3 stock... As advised your friend install something he shouldn't...
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
the problem got solved. I opened up th device, the case was a damaged power button, it was jammed or something, i replaced it and now it works just fine