Unable to unlock phone after installing Neatrom - Galaxy S II Q&A, Help & Troubleshooting

So it is that embarrassing time when you have messed up and have to ask for help
So to keep things short and sweet, but still give enough detail:
Phone: SGS2 i9100
Flashed the correct Siyah kernal - ran it for a few days with the stock rom and all was good
Decided to flash a rom and after reading about Neatrom I followed the instructions on Sale's Neatrom page on XDA...
.... all seemed to go OK. Flashed the custom recovery, flashed the rom, flashed the gapps and rebooted.
All seemed to be OK until it fully booted - to the screen where it asked for my pin. I wasn't expecting this, but used the pin I would normally use - didn't work. Tried a few obvious default style pins like 1234, 1111 etc. Nothing worked.
Decided to boot into recovery and flash the nandroid backup I had made, but instead of booting up into CWM it booted in TWRP and I could find the nandroid backup.
Perplexed I tried reflashing the rom - this seemed to go OK, but then when I tried to reboot, the phone got stuck on the Neatrom splash screen.
I feel like an idiot (I guess I am!)
Many thanks for reading and I hope someone is gracious enough to help me out.

Right, just to prove I'm not useless... OK not really, I did it cos I wanted a working phone... I had a flash (flash, geddit?) of inspiration and used TWRP to flash the CWM zip on my phone. I then used CWM to restore the nandroid backup and I now have a working phone again. Yay!
I'd still like a custom rom (neat rom would be good), but unless I know what to do differently I'm going to end up with the same problem of being unable to get past my lock pin... I suppose I could remove the lock pin and then try again, but I suspect that the lock pin might not be my only problem...

Related

[Q] Help request, S2 stuck on boot logo

Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.

[Q] Stuck at unlocked screen

I recently rooted my phone and everything was fine. This morning I installed a debloated rom http://forum.xda-developers.com/showthread.php?t=2296109 and It seemed to work but after I rebooted the phone just sits at a screen that says
Samsung
an unlocked icon
Custom
I can still get into Odin and TWRP but nothing I do seems to solve my problem. I have verified the MD5 of the image as well as trying to install a backup I made prior to flashing but the restore fails.
Does anyone know what I can do?
I should add that TWRP asks for a password when I load it but I never explicitly set one and also it seems to have trouble with the partition table.
Update: Solved maybe? I got this phone to boot but I am not sure what happened. I flashed a rom from TWRP several times and finally one took ... still would like info from someone who actually knows what is going on as I am not sure this wont happen again
Update: So it seems that every time I something happens and the drive or loader gets encrypted and it no longer boots. the "solution" is to do a full wipe then install a rom. This happens every time i reboot and I would really like a solution to this.

Getting Stuck on the Samsung Boot Screen on Some Roms

I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Factory reset Last option
snowman4839 said:
I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Click to expand...
Click to collapse
if nothing works, factory-reset but last option.
yeah I just started downloading the stock rom to flash with ODIN in the morning. I just wanted some reason why this would happen so I won't always have have this problem and to know why it only works with some roms over others.
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Zothar said:
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Click to expand...
Click to collapse
I restored to stock using these files http://www.sxtpdevelopers.com/showthread.php?t=237 to flash through ODIN. Rerooted by flashing the older kernel, rooting, installing superSU, then reflashing the newer kernel (normal root procedure). Then I insatlled ROM Manager and gave it root to install CWM recovery. Then I flashed to my same Hyperdrive ROM I was using before and now everything works beautifully. Nothing gets stuck anywhere an no more "cannot mount /data"
Just use that site and restore to stock and everything should work fine.
I'd like to add some confirmation to this. I had similar problems after flashing my first ROM- phone wouldn't reboot a second time, and when I attempted to make nandroids the files would be ridiculously large (~1 TB). I restored to the stock Touchwiz, rerooted normally, and reflashed normally. The strange thing is that I did the rooting and the flashing with the same files I had used the first time, implying something went wrong during the first rooting/flashing process.

[q] help!! Note down

So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:

[Q] Rooted, but can't install custom recovery...

Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
OK, from your post it looks like you have done this before. To be sure lets go through the motions one more time.
Your device is updated to 4.4.4 NK4 the latest KitKat version. It's rooted you have supersu icon and run a root checker. First download again ( in case you got a bad download ) a copy of Philz CWM version 6.48.4 here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ use "phil'z_touch_6.48.6-hlte.tar.md5" . I like to use odin version v1.85 it's little older but very stable, here is a link https://mega.co.nz/#!oA5xzTAL!LXoVWB...ZlOMSWdRGVX6Uo now flash the .tar file with odin. Make sure you let device boot up on it's own back to the OS, do not pull the cable and boot the device yourself. Then try and boot into recovery.
If it bootloops again, I would backup all your data to the PC desktop, and then do a factory reset get back to bone stock ( that means when your in download mode it says Samsung Official status not custom ) so many times I have seen folks with an unrooted device where the bootloader still says custom and you end up with a dirty flash or worse. It may take a couple factory resets to get back to stock, it doesn't always take the first time. When I flash a custom rom and then decide to go back to stock, I flash the rom two or three times to make sure I'm bone stock.
If the factory reset doesn't work you may have to flash a new stock NK4 OS. Then root again and install the recovery. Here is my thread with all the info you need http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 , Enjoy !!!
Thanks for taking the time to give me a detailed response. Sounds like I'm gonna have to wait till Wednesday or Thursday when im off work and have some time to do this, but yeah, I was thinking maybe just a factory reset, but I'll use your links and try it one more time first. I'll let ya know. Thanks again
Do you have another link to the older Odin (1.85).the link says the file isn't there... Thanks again
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Psychotic-Cerebellum said:
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Click to expand...
Click to collapse
Awesome, Ya idone is the man when it comes to enabling the mobile hotspot be careful what you click with app. I will correct that link. Thanks
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
That's the problem Knox security is getting harder flash engineering boot loader again then try rashr in app store to flash philz

Categories

Resources