I cracked my outer screen. The digitizer seems to be fine but If I plan to sell it, it's gotta be fixed beforehand.
Anyone got a breakdown for what I can do to fix this myself?
Sent from my SM-N900P using XDA Free mobile app
Adamus-Prime said:
I cracked my outer screen. The digitizer seems to be fine but If I plan to sell it, it's gotta be fixed beforehand.
Anyone got a breakdown for what I can do to fix this myself?
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Ya, I think we all have had to replace a screen. It's not easy, but doable. Here is a good price on a replacement screen http://www.amazon.com/Black-Samsung-Galaxy-Replacement-Screen/dp/B00HDAPL68 and this is a good video on how to do it http://www.youtube.com/watch?v=tMEeWEbtqcU I would watch the video a couple of times first. Or take it to Sprint corporate store they will usually do it while you wait, and may or may not charge you. Good Luck !!!
Adamus-Prime said:
I cracked my outer screen. The digitizer seems to be fine but If I plan to sell it, it's gotta be fixed beforehand.
Anyone got a breakdown for what I can do to fix this myself?
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I did this and it worked fine just go slow when taking off the old screen heat it with a hair dryer as you peel it off and clean it real good after b4 install of the new screen try to find some kind of glue that may come with the new screen cuz after I did mine the first time it worked fine but the touch response was a lil slower then b4. But still way cheaper then sending it out for repair.
I'm mainly concerned about the glass itself, having connectors or ribbons that need solder
Sent from my SM-N900P using XDA Free mobile app
Look around in your city....like in Phoenix here there are a couple cell phone fix stores that will replace glass for like 20 bucks.... Well worth it for me not having to do it ...
Sent from my SM-N900P using Xparent BlueTapatalk 2
Adamus-Prime said:
I'm mainly concerned about the glass itself, having connectors or ribbons that need solder
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
The glass itself only has the bottom connectors for the back, menu and home .If you decide to install yourself just take your time and go slow and you'll be fine. Like the jimzweb1 said there are a number of youtube videos that will walk you though. http://youtu.be/S_BadHtLPbU How to Separate Glass Only on Galaxy Note 3!: http://youtu.be/HwrSdrySqec Hope these help a bit.
If you have insurance through Sprint, take it in, there is no deductible for just replacing the glass.
Sent from my SM-N900P using XDA Premium 4 mobile app
Related
So I woke up today to find that my camera lens had cracked yesterday while pocket carrying my phone...thanks HTC for crappy quality. Can not find a lens replacement for thunderbolt I can find some for EVO 4G anybody know if these are the same size or close enough. Had to use old vogue lens grinded down to cover camera it works but it sucks .
Sent from my ADR6400L using XDA App
Anybody know of an alternative to replace the glass cover on my camera. My fix works but the quality of my pictures is not great.
Sent from my ADR6400L using XDA App
I'd suggest just getting your Tbolt replaced from Verizon as this was not your fault.
I tried they told me I would have to file s claim.
Sent from my ADR6400L using XDA App
I've dropped mine a couple times, tossed it onto my desk, all sorts of fun caseless things...and yours just breaks while sitting in a cloth pocket?
Are you sure you're telling the whole story...?
Lol I had it in my pocket most of the day I'm not shure how it cracked. But I'm not worried about how, I want to fix it, any suggestions to how or where to get a lens .
Sent from my ADR6400L using XDA App
i think your picture says enough.
sorry i wish i could help with a solution there but its a hardware problem
Geez stereotyped by my picture now .... What has xda come to.
Sent from my ADR6400L using XDA App
ive never seen just a replacement lens. if verizon refuses to replace it, then try contacting HTC and see if they have a way of providing that part.
a cracked lens isnt a defect so any damage to it will be deemed 'your fault.' so verizon probably wont give you a new one :\ and if you dont have insurance then thats bad news. sorry dude
another option could be to take it to one of those ripoff-artist kiosks at the mall that replace cracked phone screens. their suppliers might have access to your part.
Thanks gohamstergo I have a call into a friend who works at a Verizon service center ( 300 miles away) to see if he can get me one from a damaged phone and also an xda member is checking his parts bin to see if something he has will work. Your pic proves don't judge a book by its cover.
Sent from my ADR6400L using XDA App
Call em and tell them that your charge ports broken and it won't charge. They will replace. Usually with no questions lol. Always works for me
THUNDERBOLT
Now that would be dishonest...but I think my friend at Verizon will be able to come thru with a lens he had two cracked screen tb at his service. Center today
Sent from my ADR6400L using XDA App
elliott35 said:
Call em and tell them that your charge ports broken and it won't charge. They will replace. Usually with no questions lol. Always works for me
THUNDERBOLT
Click to expand...
Click to collapse
That will get you a $350 charge on your bill. New policy. And personally, I totally agree with it. If you send in a physically damaged phone the techs at the warehouse will take pictures as proof and send you a receipt for your new 'equipment charge'
Sent from my ThunderBolt using XDA Premium App
That's what I figured..any who he was able to pull the lens from a phone they got that couldn't be repaired so no worries.
Sent from my ADR6400L using XDA App
mcmillanje said:
That will get you a $350 charge on your bill. New policy. And personally, I totally agree with it. If you send in a physically damaged phone the techs at the warehouse will take pictures as proof and send you a receipt for your new 'equipment charge'
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
I guess verizon likes me then because I don't get charged... I have been a customer for 23 years and I have 5 lines an they have told me that I do get special treatment soo iduno
THUNDERBOLT
Lol I want special treatment too....
Sent from my ADR6400L using XDA App
Has anyone had trouble with the screen randomly having a dead area. Reboot fixed it last night. I'm thinking maybe it's the screen protector lifting. But there is no bubble.
Sent from my EVO using xda app-developers app
Have you been keeping your phone in your pocket. Reason i ask is i had the same issue. Didnt appear to be the screen but endded up needing a replacement as a result of it. In pocket will cause the screen to warp, after a while, as in my case the damage can be permanent.
Sent from my Evo 4g LTE...***** !!!
Did you have a case? I'm using an otterbox. I'm hoping it's the screen protector because I'm also having issues with the proximity sensor
Sent from my EVO using xda app-developers app
Sent from my EVO using xda premium
My screen had a big black dead spot on it. If you pushed on it you could move it around. I don't know what caused it. I hated it!! So I ordered a replacement non OEM lcd screen w/o digitizer from amazon. I managed to peel off the digitizer with it still in working order. It was held on by a lot of adhesive. I don't recommend it. Slapped it back together good ad new.
Oh you know my spot isn't black. And actually hasn't been back. Did yours start to have issues at random before or all of a sudden.
Sent from my EVO using xda app-developers app
Sent from my EVO using xda premium.
It started with a little bit of yellowing at the bottom and then it got some black bands at the top. After that a black spot the size of a dime formed. I didn't feel like unrooting my phone back to stock, so I bought a new LCD from amazon. I highly recommend buying one w/ the digitizer. It has a verry strong glue between the two. I had to be very careful seperating them and removing all the adhesive cement.
Anyway brand new screen for $57. Replacement is non OEM, but just as good.
I have no discoloration at all. I've switched the screen protector and its still here. I will likely unroot and head into the store.
Sent from my EVO using xda app-developers app
Went into the store and the rep told me it was cosmetic and that they would not replace the screen. He also said that it would be a good idea to put my phone back to stock if I wanted to bring it in for service because the technicians would likely just run the ruu and say problem solved.
Sent from my EVO using xda app-developers app
no discolouration, no blackspot, appeared to be fine visualy, just a area that was dead.
How is that cosmetic?
Sent from my EVO using xda premium
They said because you can still use the area that is dead but you have to keep touching the area. Eventually it does work.
Sent from my EVO using xda app-developers app
Its not cosmetic, it is mechanical. You have to be pretty stern with the sprint reps. They told me exactly the same thing. I just told them go ahead and ruu (s-off anyway, didnt matter) after they ran it and found for themselves it was mechanical they went ahrad and replaced the screen. My expierience with sprint reps has been 50/50, but usually they know out of the gate your phone is rooted. If your honest with them and they know its rooted, when yhey find out its a mechanival issue that they dont have to send back to the factory, theyll just rmake the repair and uour good to go. **** it man just tell them youve been keeping it in your pocket and it blisterd the screen and you need it replaced. Letem do their thing and be done with it.
Sent from my EVO using xda premium
Did you have your phone in a case. I'm confused about the blistering screen. Is it something that all of the phones are vulnerable to because of the shape?
Sent from my EVO using xda app-developers app
Also how much did you have to pay for the replacement
Sent from my EVO using xda app-developers app
replacement is normally $35 without full insurance,
Natodu said:
Did you have your phone in a case. I'm confused about the blistering screen. Is it something that all of the phones are vulnerable to because of the shape?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Ok since you need to get all scientific and **** about it. Yes my phone was in a case. But keeping it in my pocket caused excessive pressure on the screen and caused it to warp Just enough to keep it from functioning properly in one spot. The spot where the warp(blister ) occured. It's not really rocket science, just have your screen replaced and your troubles will be over. It's free with insurance about 30/35 bucks without
Sent from my EVO using xda premium
I have insurance so it should be covered. But the issue is gone at random.
Sent from my EVO using xda app-developers app
Natodu said:
I have insurance so it should be covered. But the issue is gone at random.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
That's cool, glad your issue is resolved. Just a note in the future when someone offers their help and advice one should consider useing the thanks button. Its there just for that purpose.
Sent from my EVO using xda premium
I've had random dead spots from the get go, not visual, just ui, and my capacitive buttons are wonky too - back button is under sensitive, recent apps (what a waste of function!) is over sensitive, like I don't have to actually make contact, really sucks. Got 10 days left for exchange (Best Buy) and I'm thinking of going w/ the gs3. Also having radio issues and a few other bugs. I just HATE touchwiz and I like sense.
Sent from my EVO using xda app-developers app
---------- Post added at 09:35 PM ---------- Previous post was at 09:18 PM ----------
So now my screen just cracked. Didn't drop, didn't sit on it, must of happened wiping it off with my shirt, or it spontaneously cracked. What a pos!
Sent from my EVO using xda app-developers app
Its pretty well known that a good amount of evo's have deffective displays. But if your phone is modded out and you can't make it look stock to the tech at the store, you mine as well just fix it yourself. Its the price we pay to have a better device. I found a replacement on amazon for 50$. Its a no name but its as good if not better than OEM. Also its not recommended but if you have a dead spot you can press on the screen to move it to a less important spot. Just be careful good chance of making it worse.
Sent from my EVO using xda premium
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
agentofchaos said:
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
If you search for "rezound screen replacement" on YouTube there's quite a few step by step videos.
Sent from my ADR6425LVW using xda premium
zac41189 said:
If you search for "rezound screen replacement" on YouTube there's quite a few step by step videos.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
The ones I've seen don't show a reassemble portion :/
Sent from my ADR6425LVW using xda app-developers app
agentofchaos said:
The ones I've seen don't show a reassemble portion :/
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I did this and failed. Proceed with caution.
Sent from my Rezound using Tapatalk 2
replace
agentofchaos said:
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Used one of the youtube vids for dis-assembly. Re-assembly is basically just the same steps in reverse. The most difficult part was lining up the placement of the digitizer on the LCD. If you don't get this right, the screen will not fit properly. I had to somewhat set the pieces together all in place loosely to get the alignment right (lcd sitting in the slot with the digitizer somewhat in place in the front bezel), and then take them apart and secure them together better to ensure a proper fit if that makes sense. My first try - lining thing up by eye - was not quite right. I used some 3M 2mm adhesive I ordered along with the tools. Taking the digitizer off is a bear, it takes quite a bit of patience and a bit of force. Reseating the cables is also a pain, use the plastic pry tool to help reseat, and have LOTs of patience during the whole process. Make sure to give yourself a solid hour or more. I just broke my second screen today with a beer bottle of all things, so I'll have to redo this whole process here shortly. Also make sure the front of the LCD and back of the digitizer are very clean, and the adhesive is lined up properly and not blocking sensors. I didn't do this well, and have a slight bit of adhesive sticking out the bottom side about 1mm into the visible area of the LCD, and the back of the digitizer is noticeably "gunky" in the front camera region, which I think is also causing some issues I'm having with the front proximity sensor. Hopefully I'll do a better job this next time. Good luck!
Oh my Chad.... Lol
Definitely out of my skill.
...any recommendations of what type of phone repair shop I should look into? I went to an iPhone based, but "smartphone" capable repair shop and he definitely didn't know what to do. He said it would cost 70$ and that it would be risky...... Not something I'm about to shell out 70$ for especially when I already have the replacement screen
Sent from my Rezound using xda app-developers app
agentofchaos said:
Oh my Chad.... Lol
Definitely out of my skill.
...any recommendations of what type of phone repair shop I should look into? I went to an iPhone based, but "smartphone" capable repair shop and he definitely didn't know what to do. He said it would cost 70$ and that it would be risky...... Not something I'm about to shell out 70$ for especially when I already have the replacement screen
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Bump
Sent from my Rezound using xda app-developers app
agentofchaos said:
Bump
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I've seen a couple places online that you can send your phone to and they'll replace the screen and ship it back to you within a few days. Never tried a site like that tho and could be kinda sketchy but that's an option. Also here in Albuquerque there are tons of Craigslist ads for screen replacement here in town so you could check your city's page and see what you find.
Sent from my Rezound using xda premium
I did this very thing last week successfully with no problems. Follow the repair video by repair universe on YouTube to the letter and you will do just fine. The key is to take your time and make sure the phone is heated enough with the hair dryer or heat gun to ensure that the adhesive comes apart smoothly. Take extra special precaution not to crack the LCD screen when removing the glass (digitizer) from it
If you're not willing to take the chance, you could always send it to me (for free) but I can't guarantee a flawless victory
agentofchaos said:
Oh my Chad.... Lol
Click to expand...
Click to collapse
I see what you did there...
If you decide to repair your screen yourself, there are also four transparent pieces of plastic that you need to put on the new screen.
They are for the capacitive buttons, so they redirect the light from the lights on the motherboard to the buttons.
Unless you don't want lights, of course. (I forgot to put them on mine lol, but I don't mind having no lights)
Also, when you put it back together, make sure to seal it very well on the outside so water doesn't get in and screw up the digitizer. You may have to use glue or something else as a sealant.
Every time it rains, my digitizer gets messed up from water getting in. (crossing my fingers for no permanent damage)
Sent from my HTC Rezound using Tapatalk 2
So my DNA was sitting on the bedside table last night and my girls cat pulled the charger cable and knocked it off of the table. When it fell it hit the leg of the table on the top left-hand corner and shattered the screen. I am having digitezer issues now and it is very annoying. Does anyone know where I can get the screen replaced? If that's even possible.
Thanks for any help.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
They sell DIY kits on eBay, but most cell repair places should be able to do it.
P.S. you can never trust a cat
Sent from my CarbonROM 4.3'd HTC DNA
Damn it. These screens must be made of glass! I don't think I've ever heard of screen breaking as easily.
There's lots of threads and tutorials and videos on screen replacement.
You think it's worth trying to do it myself? I used to work in a cell phone repair shop but never done anything like the DNA
Sent from my HTC6435LVW using XDA Premium 4 mobile app
I have original screen+ cracked digitizer . The screen is fully working and from original Dna. Do you need? If yes, tell me , i will give u good price
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Well my screen is still working I just want to know if it's worth getting replaced. How much were you thinking? I might be intrested
Sent from my HTC6435LVW using XDA Premium 4 mobile app
platypuss94 said:
You think it's worth trying to do it myself? I used to work in a cell phone repair shop but never done anything like the DNA
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It doesn't appear too bad to do. I'd suggest getting a "frame" and the adhesive as well. Separating them seems to be the hardest step.
Also get a tool kit.
Sent from my SM-G900T using XDA Free mobile app
I'm talking about the little tab, cover that covers up the bottom connection where you plug the phone in at. As anyways mine just completely fell off my phone.besides covering up the connection for no water will get in if I get my phone wet there's Really no need for it right? What is this part called? Thanks In advance!!!
Sent from my SM-G900T using XDA Free mobile app
Usb cover is what I know it as.
Dust and water resistance is it's only purpose and you can use it without it.
They go for about 6$ on eBay for a replacement
TheArtiszan said:
Usb cover is what I know it as.
Dust and water resistance is it's only purpose and you can use it without it.
They go for about 6$ on eBay for a replacement
Click to expand...
Click to collapse
Thank You Very Much bud.
Sent from my SM-G900T using XDA Free mobile app
TheArtiszan said:
Usb cover is what I know it as.
Dust and water resistance is it's only purpose and you can use it without it.
They go for about 6$ on eBay for a replacement
Click to expand...
Click to collapse
So basically if I was to sell my Gs5 it won't hurt the value of my device. Thanks
Sent from my SM-G900T using XDA Free mobile app
xda23 said:
So basically if I was to sell my Gs5 it won't hurt the value of my device. Thanks
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
It will if you don't replace it. You're the 4th person who had this issue. Wow samsung...ridiculous for a $700 phone.
Sent from my SM-G900T using Tapatalk
aooga said:
It will if you don't replace it. You're the 4th person who had this issue. Wow samsung...ridiculous for a $700 phone.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Thanks for answering my question bud.I will just buy one and hold onto it for when and if I ever sell my Gs5.and as far as you know it's called a Usb cover. Thanks
Sent from my SM-G900T using XDA Free mobile app
xda23 said:
Thanks for answering my question bud.I will just buy one and hold onto it for when and if I ever sell my Gs5.and as far as you know it's called a Usb cover. Thanks
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Does anyone have a link from eBay that I can order this part from. Thanks
Sent from my SM-G900T using XDA Free mobile app
Here you go
http://www.ebay.com/itm/Original-OE...er_Cell_Phone_Accessories&hash=item20e64bc0b5
TheArtiszan said:
Here you go
http://www.ebay.com/itm/Original-OE...er_Cell_Phone_Accessories&hash=item20e64bc0b5
Click to expand...
Click to collapse
I just ordered one bud. Much thanks!!!
Sent from my SM-G900T using XDA Free mobile app
OEM part for USB cover
Here is the original OEM part from a source other than eBay, just in case that one disappears. Simply unscrew the little retainer above the broken cover and put this one in.
IP67 fully restored.
http://www.witrigs.com/oem-usb-cover-flap-for-samsung-galaxy-s5-sm-g900f
Mine broke today. I didn't want to deal with refurbs so I don't want to replace the whole phone. I still thought I should stop at a tmobile store and see what they could do. To my surprise, they had a returned S5 and were willing to take the cover off of that one and put it on the new one. The other sad part is they said I wasn't the first one to have this issue. Apparently it's pretty common. I'm pretty disappointed in Samsung.
aooga said:
Mine broke today. I didn't want to deal with refurbs so I don't want to replace the whole phone. I still thought I should stop at a tmobile store and see what they could do. To my surprise, they had a returned S5 and were willing to take the cover off of that one and put it on the new one. The other sad part is they said I wasn't the first one to have this issue. Apparently it's pretty common. I'm pretty disappointed in Samsung.
Click to expand...
Click to collapse
No **** for $700.00 we should not have these problems.
Sent from my SM-G900T using XDA Free mobile app
xda23 said:
No **** for $700.00 we should not have these problems.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Forget $700, NOTHING from a company like Samsung should do this.
aooga said:
Forget $700, NOTHING from a company like Samsung should do this.
Click to expand...
Click to collapse
You are correct. They should send a permanent part that will snap shut... to everyone... for free. Seriously.
Sent from my SM-G900T using XDA Free mobile app
Yeah I have noticed that if you are not really careful with it they do tend to break easily
When opening it you need to open along the lines with the hinge and keeping it parallel with the screen and shouldn't have any issues.
'But if it is twisted above or below the phone at all or anything beyond the straight in or out it will break after a little repetition.
Wireless chargers are your friend....
gridflash said:
Wireless chargers are your friend....
Click to expand...
Click to collapse
How much did you pay for your wireless charger? Do you have a link where you bought it at? Thanks
Sent from my SM-G900T using XDA Free mobile app
xda23 said:
How much did you pay for your wireless charger? Do you have a link where you bought it at? Thanks
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
This the thread from last week where I discussed this. Since then there has apparently has been a run on the black pads.
And they've gone from 18.90 to 47.49.
http://forum.xda-developers.com/showthread.php?t=2776884&page=3
But the white ones are still 17.99
http://www.ebay.com/itm/White-Qi-St...55159?pt=Battery_Chargers&hash=item27e324a917
What was good about Thoth's Camera Store is they're in New York.. You don't have to wait for ePacket delivery from China.
gridflash said:
This the thread from last week where I discussed this. Since then there has apparently has been a run on the black pads.
And they've gone from 18.90 to 47.49.
http://forum.xda-developers.com/showthread.php?t=2776884&page=3
But the white ones are still 17.99
http://www.ebay.com/itm/White-Qi-St...55159?pt=Battery_Chargers&hash=item27e324a917
What was good about Thoth's Camera Store is they're in New York.. You don't have to wait for ePacket delivery from China.
Click to expand...
Click to collapse
So how do you hook up, Install on of these wireless chargers.are they pretty good chargers. Thanks
Sent from my SM-G900T using XDA Free mobile app