Hello,
I mess up my tablet with a factory resset and now i can't boot in normal way. The tablet is open and appear a light on the screen and that is. I tried a multiples roms but only one who boot and show a image is from this tablet : http://www.denver-electronics.com/denver-tac-97042/ . Only problem is : tablet boot but not loadind the sistem(is blocking in android logo). The tablet i think is this one : http://www.amazon.it/i-INN-Display-Pollici-Capacitivo-Android/dp/B008EHBJQA. For what i know have 1 GB RAM and Allwienner CHIP A 10(single core).
Do you have a rom for this tablet or a similar one?? Please help me because my little one can't use usual games !!
pls.
bogdan109 said:
pls.
Click to expand...
Click to collapse
Only firmware who work is this ragonTouch_MID970IPS_4.0.4 ,but i have problem wit the touchscreen. I touch for exemple upper and open lower. I thank is a inverted touch.
I need help.
Sent from my SM-G901F using Tapatalk 2
I heave the sametablet. Somehow it stop working. Stuck on android logo. I tried to restore it with uberoid. Now it not turning on at all. If i connect it to comp i hear the sound and in device manager i see some drivers from MT65xx. Anyway, i know its possible to repair but i can't figure how. A little help? Tablet> i-INN Communicator 10' 3G. Thank you.
Related
Hi to all!
I recently bought this phone, I have to admit to being fully satisfied of the features except for one ... the GPS function.
I have read dozens of guides to adjust the GPS W8+ but not for my model. If I knew how to do the root I could at least try to use the same method.
Does anyone have suggestions on how to do it on this phone?
THL W8 Beyond
Hello, i have also bought a thl w8 beyond and i have the same questions, if anyone could help id be very apreciated!! Thanks
Root
hi,
Motochoper root hack fail on W8 beyond.
THL W8 Beyond:Recovery,Root máy
birdyisme said:
hi,
Motochoper root hack fail on W8 beyond.
Click to expand...
Click to collapse
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Thanks thienhoa
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
thienhoa said:
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Click to expand...
Click to collapse
So I got mine W8 beyond two days ago.
So far so good, but:
1. GPS problem. I am geocacher (more at: geocaching.com) and I need accurate GPS. When I stood still in the open for few minutes, I could see GPS jumping around for 400-900 meters for no reason. AGPS and EPO activated. We will see how it goes
2. I would love to get polish language settings, since there are some apps which fetch the content depending on Your language setting (I know that this is poor design, but this is how they works), so that would be nice. Not an issue anymore. I installed MoreLocale2 and pm'ed it which is more than enough at the moment.
3. I do not see option for sorting the apps in the main apps menu (it was working on my old Lenovo A750) - am I missing something?First 9 icons are fixed and alphabelical, the rest is just alphabetical. I can live with that.
4. I have my contacts stored with country prefix which is not used by my operator. I do not see my contacts data when they are calling me.
The SMSes are provided by operator with country prefix, so the problem is with calls only. I tried to follow this thread http://forum.xda-developers.com/showthread.php?t=2268120 but I am unable to decompile framework.jar - no classes.dex inside. I am not able to deodex framework.odex either, so I am stuck for the moment.GravityMod2 3.0 ROM fixed that problem.
The link provided with the tools and howto contains W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img,
when I go to phone info at my phone I can see W8_beyond.JB2.FHD.EN.COM8P128_MT6589TV1.0.2_20130626.
Seems like I have newer firmware. If anyone can tell me how to extract this, I would be more than happy to share.
GravityMod2 3.0 installed - not an issue anymore
For my good old Lenovo I was able to modify the ROM as soon as I got my hands on any ROM in zip format. I guess I could also try to compile something (I am a programmer), but since I am extremely low on time I would need MT6589T kernel patch (is it the same like mt6589) and some basic manual.
Anyone interested?
Fix GPS
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
thienhoa said:
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
Click to expand...
Click to collapse
Thanks, but I got A-GPS and EPO already enabled and EPO downloaded.
I till try to go to the engineering menu and locking via YGPS.
As I understood from google translator, I should just wait for lock and then close everything. Since then everything should be running smoothly. Am I right?
What about my other questions? Lack of polish is driving my crazy. My news feeds are all US which is driving me crazy ...
w8 beyond dead
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
ilmeccanico said:
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Low_Man said:
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Click to expand...
Click to collapse
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
ilmeccanico said:
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
Click to expand...
Click to collapse
Have You tried reflashing it again with this: ovh.to/GrW17MP?
yes i tried it
Does the GPS works fine on this phone? i would like ot buy this phone....
SICOPOLY said:
Does the GPS works fine on this phone? i would like ot buy this phone....
Click to expand...
Click to collapse
Mine work - kind of ...
After getting the fix the coordinates jumps for 1-2 second every 5 seconds.
This makes it troublesome but possible for navigation
what SAR rating for thl w8 beyond?
Anyone knows how can you root the latest 1.0.2 w8 beyond version?
Getting "Incorrect scatter file format" error
birdyisme said:
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
Click to expand...
Click to collapse
Hi,
Thanks for this great tutorial and for arranging all the needed files in one location!
I have a small problem
1. When I open the flash tool I get the following error: "fail to load a raw data file: "c:\users\stephane\Desktop\thl8beyond\W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img
2. When I continue the falsh tool opens but when I try to upload the scatter file I get the following error: "Incorrect scatter file format!"
3. My current build number is: W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.2_20130626. Can I still use the image you provided ?
Thanks a lot in advance!
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
lepsulet said:
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
Click to expand...
Click to collapse
The easiest and only way i could root my W8 beyond is with this program:
droidchina.com/forum/Thread-ROOT-GUI-Root-Wizard-for-MTK65xx-phones
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Solved...
I'm sorry to have bothered you all.
It's strange.. but i changed the usb cable (that works perfect with my phone) and tablet was seen from the rockchip flasher..
Really sorry.
Thx.
Help
figus77 said:
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Click to expand...
Click to collapse
Hello, how did you solve it? Please any help will do.
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so and now it is not loading any thing
not loading driver no boot screen no other when i connect it with my pc it show red light for 3 sec and then the light off it self how can i force my andriod to load driver on pc soo i can flash it
if any one have some way of test point like other way please past it i have to do some thing with my phone.
My andriod is Mtk Base
fahadiqbal25 said:
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so and now it is not loading any thing
not loading driver no boot screen no other when i connect it with my pc it show red light for 3 sec and then the light off it self how can i force my andriod to load driver on pc soo i can flash it
if any one have some way of test point like other way please past it i have to do some thing with my phone.
My andriod is Mtk Base
Click to expand...
Click to collapse
If it was rooted, you're screwed.
Can you tell us what happens when you hold the power button? Show pictures.
it is not loading thing on any key combination i have tried all but all in vain it was rooted last time i think ssoooo
fahadiqbal25 said:
it is not loading thing on any key combination i have tried all but all in vain it was rooted last time i think ssoooo
Click to expand...
Click to collapse
You will need a board replacement since you f-ed up your bootloader (bios in the android world). At least you can change the title to how to f-up your bootloader.
is there is any test point for lenova s60-a
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
alvarmat said:
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
Click to expand...
Click to collapse
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
deceiver7 said:
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
Click to expand...
Click to collapse
alcatel one touch pixi 3 (10) WI-FI ? or 3G ?
on 3G (9010) a lot of information
very necessary for wi-fi (8079).have on hand?
download this official updater: https://1drv.ms/u/s!AvUqW-s0ZKJvhVoy4gT1Oiynk8Av choose your model (mine was 8079 - made by TCL as stated in the box).
Hello
@calculo. The program doesn't recognize tablet in the step 3/4 and tablet keep in bootloop. I need the Stock Rom to be able to use it with Sp Flash tool. If you could upload it, I would appreciate it.
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Guys, need help pls. Got one Pixi 3 3G 10 dual sim device (9010X), went to flash it via SP tool, but it seems I bricked it. Possibly with wrong FW. Now tablet is dead, nothing on screen, but on USB connetion, computer play sound wheni iI connect it . SP and AutoUpdater tools won't recognize it. Any hope here? thanks
EDIT: I got it again recognazible by SPFT by removing the battery, It is flashable again, need correct FW, but can't find it anywhere
Guys need help please! ?
My tablet is dead! "Pixi 3 3G 10 device (8970)" nothing on screen, but on USB connetion, computer play sound when i connect it and receive a message "USB device not recognized" . SP won't recognize it. Any hope here? Thanks
Pixi 3 3G 10 device (8970)
After i tried to upgrade firmware with Mobile Upgrade S Gotu2 it didnt even pass second task only said network error my "Pixi 3 3G 10 device (8970) has nothing on screen and i recive message "USB device not recognized on my computer.
I tried with sp flash tool installed the mtk driver on win7 and on win 10 but it doesnt recognize the usb can someone pls post how to properly install drivers for sp flash
Any help is appreciated
caculo said:
download this official updater: choose your model (mine was 8079 - made by TCL as stated in the box).
Click to expand...
Click to collapse
Thank you, Thank you, Thank you ...... This worked for me after 8 hours of trying to fix my hard bricked pixi phone!:good:
Yep, I have managed to brick my pixi 3 (10). I have tried to root my device, but Kingroot failed.
Then I've tried to TWRP (https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944) and my device went to bootloop it self with garbled screen (while connected on PC i've heard device connected - device disconnected sound constantly)
And finally I've tried with this https://forum.xda-developers.com/showpost.php?p=72854696&postcount=4 and device stopped with bootloop immediately after I've clicked on Yes in dialog "To begin please confirm that your device's battery is fully charged..."
But it has stopped to boot at all, and now when I connect device to my PC I get message "USB device not recognized"...
Is there any hope, or I should use this tablet as a frisbee?
hola quisiera q alguien me alludara a saver si la rom de la tablet pixi 3 10 8080 es el mismo sistema con el 8079
alvarmat said:
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Click to expand...
Click to collapse
@alvarmat Could you provide more infomation on the battery charging part? I'm trying to unbrick a Pixi 3 8079 that won't charge, but I'm on the fence of doing something like that for fear it may damage the battery and the circuitry. Which charger did you use?
SOLUTION
Maybe it's late but i hope it helps someone
Chain 2 AA batteries in serial, end to end , connect 2 cables on both ends using electrical tape. - end ground to the metal CPU cover and + end touch solder on red wire coming from the battery for a minute and the device should turn on.
There is a guide on YT using voltmeter but I'm guessing like me you don't have one
Don't use the stupid update tool!
Hi,
i have tryed to make an firmware upgrade to the tablet and after complete and restart the tablet turn on and remain in a black screen, dont do nothing.
The big problem is that is not load in to Safe mode so i can reverse to factory firmware and my PC dont see it anymore.
Any clue what to do?
I have found SP Flash Tool but the ROM and Firmaware i found dont have a scatter file to load, and not sure if will work either because the pc dont see the tablet.
Im pretty noob at this so dont be to harsh. Any help is appreciated.
Thanks