i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so and now it is not loading any thing
not loading driver no boot screen no other when i connect it with my pc it show red light for 3 sec and then the light off it self how can i force my andriod to load driver on pc soo i can flash it
if any one have some way of test point like other way please past it i have to do some thing with my phone.
My andriod is Mtk Base
fahadiqbal25 said:
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so and now it is not loading any thing
not loading driver no boot screen no other when i connect it with my pc it show red light for 3 sec and then the light off it self how can i force my andriod to load driver on pc soo i can flash it
if any one have some way of test point like other way please past it i have to do some thing with my phone.
My andriod is Mtk Base
Click to expand...
Click to collapse
If it was rooted, you're screwed.
Can you tell us what happens when you hold the power button? Show pictures.
it is not loading thing on any key combination i have tried all but all in vain it was rooted last time i think ssoooo
fahadiqbal25 said:
it is not loading thing on any key combination i have tried all but all in vain it was rooted last time i think ssoooo
Click to expand...
Click to collapse
You will need a board replacement since you f-ed up your bootloader (bios in the android world). At least you can change the title to how to f-up your bootloader.
is there is any test point for lenova s60-a
Related
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
rybczyns said:
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
Click to expand...
Click to collapse
My friend Eclipse is used to build android apps,in our case(Eclipse application is a plug-in that creates an extension for the extension point,to create applications in java form)... http://wiki.eclipse.org/FAQ_What_is_an_Eclipse_application?
As for the bricked phone,its not bricked if it comes on,its called a soft brick and can be fixed by reinstalling a recovery,then a rom that is compatible with your phone.
Diablo 7 is right as your phone is booting up then you are having soft brick it happens to lot of people what you have to do is just flash custom recovery through pc and look for some compatible rom and flash it via recovery
Total brick means it will not boot up it cannot be detected by USB it's boot got corrupt
Sent from my LG-P765 using xda app-developers app
Ok, thanks for your reply. The thing is, I can't go to recovery or emergency mode, so I think, that i can't use flash tool. What kind of tools, do you mean, which can help me?
EDIT:
Ok, i got it works, First I uninstalled all drivers from my OS, then installed it again from LGMobileSupportTool and using Emergency System Recovery make it works. I'm glad to have Android 4.1.2
Thanks for your replies.
How to do it?
I have the same problem. Can you give me a step-by-step method on how to do it. Thank you very much?
Tried to flash the wrong rom. now tablet wont turn on. when plugged into pc it comes up as m6 chip and i have no drivers. can anyone point me in the right direction.
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
akashdubey22 said:
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
Click to expand...
Click to collapse
found this site in my searches. still haven't found anything stock or modded for mine yet. maybe you will have better luck . freaktab.(12skip[/url] a few) com/forumdisplay.php?33-NextBook-Tablets[/url] . wont let me post full link yet
HArd Bricked Nextbook nx007hd
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
I read on another webforum about how to write back a rom dump using uberizer, careful though, i remember some version being unable to restore a rom dump
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
Revisiting this tab as my solution for having it work was to fling together parts of the nx008, not perfect, I still needed to get the original ROM.
Can you perhaps provide me with a dump of the original ROM?
Also if you need help loading the rom onto the bricked one, I believe I can be of some help.
Thanks
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Perarg said:
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Click to expand...
Click to collapse
I have the same problem patrida !!! Have you found out a sollution yet ?
Use SP_Flash_Tool_v3.1344.0.212
And select Firmware -> upgrade
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
can you fastboot on the RCA tablets?
no i dont think so
How did you brick it?
What happens if you:
1. Hold the power button for 5 seconds to hard power it off
2. Hold the volume down button
3. While still holding the volume down button, press and hold the power button.
4. Hold both buttons for 5 seconds.
i did that and the screen just flickers.... trust me ive tried it all...
please help guys im new to rooting tablets but give me linux and im your man....
ajmp2236 said:
please help guys im new to rooting tablets but give me linux and im your man....
Click to expand...
Click to collapse
@ajmp2236 @chrisdaun ASKED YOU A question please tell use what you did to "mess up"/ brick your tablet and maybe we can help you fix it,
I am sorry to hear about your tablet.
okay well i didnt know how to root at first and i didnt want to use a computer so i downloaded this rom and flashed via recovery menu and it was going fine but there was no root so i was confused so i ended up rooting it using a computer using kingo because its a generic tablet and well i did that and it went well for a few days until i got droidsniff and that ****ed it up because it was running and then the battery died.... please help:crying:
@ajmp2236 I am and IT guy I have used droid sniff for about 6 months or so and never had a problem That app did not brick or ruin your phone.
I also have the same rca dual core rct6378w2 tablet and there is not custom rom or recovery for it yet only stock,. what rom did you try and flash and where did you get the file from, also so can not flash roms or files until we get a custom recover built, only factory sign updates will flash in
stock recovery.
If the droidsniff app killed the battery go charge it for a while and it should work again. please let me know if any of this helps or works.
I'm thinking you are going to have to get a USB jig to force it to go to download mode
Sent from my YP-G1 using xda app-developers app
Info on RCA Tablet
here is information I found useful for the RCA Tablet RCT6378W2
Model Number
RK3168
Semiconductor technology
28 nm HKMG
CPU Instruction Set
Up to 1.2 GHz Dual-core ARM Cortex-A9
CPU
ARMv7-A
GPU
PowerVR SGX 540 (400 MHz)
Memory Technology
LPDDR2, DDR3, DDR3L support
Availability
2013
Utilizing Devices
RCA RCT6378W2,
Anyone have the official Rom
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
darkstorm1720 said:
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
Click to expand...
Click to collapse
did u get official rom?? my tablet also bricked..
I got it
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
I have rom give me your email and I'll give you link
Might help
Try this it might help might be modded
mediafire .com/?itrkcc8k7emimeu
Thats my backup rom, i posted them in androidforums for downloads, there is now a rca tablet section, i also updated the files in img format also comes with the parameter for someone to mod, also the updated files are from my rooted rca, but the original files are stock.
Heres the link.
http://androidforums.com/rca-rct637...-in-img-format-use-w-phoenix-card-3-06-a.html
---------- Post added at 12:50 PM ---------- Previous post was at 12:44 PM ----------
Nice to get credit, i go by androidcustom18 give me thanks.
email for rom
Alex2young said:
I have rom give me your email and I'll give you link
Click to expand...
Click to collapse
my email [email protected]
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
i fully bricked mine as well. mind you i have rooted a few android phones in the short time but i found some update for the rock chip series rca 7" tablet. long story short i had to install this random update on sd card and go into recovery to install it. now i will point out i rooted my tab with kingoo root and it worked but only on windows, i run a linux mint 17.1 os so you can imagine my frustration when doing things easy with windows, but however i re installed a base os for it to boot back into the rca software. and yes it is still rooted so here is the update ish thingy i found which should work for most rca 7" rct blah blah blah...............now DO NOT UNZIP ****, JUST PLACE INTO YOUR SD CARD AND DO THE INSTALL AS YOU WOULD CUSTOM SOFTWARE. NOT SURE IF IT WILL SHOW UP AS A DOWNLOAD IN THIS THREAD BUT YOU CAN EMAIL ME AND I WILL GLADLY SEND ANYONE WHO HARD BRICKED THEIR TAB THE FILE. HARD BRICK MEANING IT'S ON BUT SCREEN IS BLACK WITH A GLOW
solution for bricked rca rct6 blkah blah the cheap fukars
kishangupta.dhl said:
did u get official rom?? my tablet also bricked..
Click to expand...
Click to collapse
..............install this zip as you would any zip on sd card for update and reboot recovery and waa laaa should have a working rca tablet. not sure who made it but maybe the dev's can make a custom rom using this file. and thanks go's to the one who made it although i can't remember the site i went to or link but here it is.............it is probably the closest thing to an actual firmware update meaning stock version of the rom rather then finding it online after like say 15 hours looking
rca 7" tablet bricked and can't find firmware download?
this is my first on xda site so here go's......i assume most know by now if you landed here, there is little about the rca tablet. custom roms and stuff like that. so i will just say a semi short explanation on my rca trials and errors.....
first i rooted it with a computer running windows 7 or 8, using kingoo root. not the apk but the .exe, which you can download from their site just google kingoo root and should come up as first one.
now onto the brick portion of the rca, if you see only the rca logo and it don't do anything then it's a soft boot, easily fixable just reboot into recovery cause for some reason it takes two reset or restart to go into the actual tablet with programs n stuff.....
now if it turns on and shows the rca logo then go's black and you can seee it's on but after waiting for 5 minutes or even 2 and it hasn't turned on then it is hard bricked (meaning nothing loads or works and your holding your penis in your hand......
to fix this issue for the rca 7" black friday cheap ass tablet, rct625w you know which i mean, just install the zip file onto your extern sd card as you would the official update for any droid tab, i should also point out just put it in the general area of your card like putting a file in the c: drive of ur comp like an image or doc....
now what your going to do is reboot into recovery and select install update from sd, once in there you should see the file i posted below show up as a zip, click it and wait for verification and install then reboot and if brought back to recovery just reset again and voila it should give you a rca 7" tablet working with all the bells and whistles that usually come with this **** ass black friday sale for 39 and change!
p.s. my wife payed 95 for it before we knew they were only 50 bucks in walmart canada
i have bricked this tablet 6 times trying new ways to install a cmpletely diff os like a samsung or an archos or whatever isn't an rca **** box.....
Hello,
I mess up my tablet with a factory resset and now i can't boot in normal way. The tablet is open and appear a light on the screen and that is. I tried a multiples roms but only one who boot and show a image is from this tablet : http://www.denver-electronics.com/denver-tac-97042/ . Only problem is : tablet boot but not loadind the sistem(is blocking in android logo). The tablet i think is this one : http://www.amazon.it/i-INN-Display-Pollici-Capacitivo-Android/dp/B008EHBJQA. For what i know have 1 GB RAM and Allwienner CHIP A 10(single core).
Do you have a rom for this tablet or a similar one?? Please help me because my little one can't use usual games !!
pls.
bogdan109 said:
pls.
Click to expand...
Click to collapse
Only firmware who work is this ragonTouch_MID970IPS_4.0.4 ,but i have problem wit the touchscreen. I touch for exemple upper and open lower. I thank is a inverted touch.
I need help.
Sent from my SM-G901F using Tapatalk 2
I heave the sametablet. Somehow it stop working. Stuck on android logo. I tried to restore it with uberoid. Now it not turning on at all. If i connect it to comp i hear the sound and in device manager i see some drivers from MT65xx. Anyway, i know its possible to repair but i can't figure how. A little help? Tablet> i-INN Communicator 10' 3G. Thank you.