I'm exploring options to get root on this device. I started by probing UART on normal boot mode for aproximately three hours, yesterday. I was not able to produce any worth-while results.
In recovery mode, i was able to pull the Recovery Logs from /cache.
We can see that it starts with OPEN_PadFone-11.9.0.118-20140429-F firmware
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Thu Jan 1 08:58:27 1970
recovery filesystem table
=========================
0 /system ext4 /dev/block/platform/msm_sdcc.1/by-name/system 0
1 /cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache 0
2 /data ext4 /dev/block/platform/msm_sdcc.1/by-name/userdata -16384
3 /sdcard vfat /dev/block/mmcblk1p1 0
4 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot 0
5 /recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery 0
6 /misc emmc /dev/block/platform/msm_sdcc.1/by-name/misc 0
7 /demoapp ext4 /dev/block/platform/msm_sdcc.1/by-name/demoapp 0
8 /tombstone ext4 /dev/block/platform/msm_sdcc.1/by-name/tombstones 0
9 /gmxt ext4 /dev/block/platform/msm_sdcc.1/by-name/gmxt 0
10 /tmp ramdisk ramdisk 0
locale is [(null)]
framebuffer: fd 4 (1080 x 1920)
hdmi_init(fb0_fd=4,framebuffer=0xb5f21000)+++
using (fd=4)
id = mdssfb_80000
xres = 1080 px
yres = 1920 px
xres_virtual = 1080 px
yres_virtual = 3840 px
bpp = 16
finfo.smem_len = 0x1000000
open_fb1()+++
[Recovery] PIXEL_FORMAT = GGL_PIXEL_FORMAT_RGB_565
using (fd=5)
id = mdssfb_70000
xres = 1920 px
yres = 1200 px
xres_virtual = 1920 px
yres_virtual = 2400 px
bpp = 16
finfo.smem_len = 0x0
The ion mem device is opened successfully.
ION_IOC_ALLOC is successful.
ION_IOC_MAP is successful.
mmap is successful.
installing_text: (1 x 1 @ 1896)
erasing_text: (1 x 1 @ 1599)
no_command_text: (1 x 1 @ 1599)
error_text: (1 x 1 @ 1599)
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
[BL] int main(int, char**): Set backlight
Command: "/sbin/recovery"
af.resampler.quality=4
av.offload.enable=false
mm.enable.qcom_parser=37491
mm.enable.smoothstreaming=true
ro.qc.sdk.izat.service_mask=0x5
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sensors.step_counter=true
ro.qc.sensors.step_detector=true
ro.qc.sensors.smgr_mag_cal_en=false
ro.sf.lcd_density=480
ro.com.google.clientidbase=android-asus
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.cpu.id=107b80e1
ro.gps.agps_provider=1
ro.asus.factory=1
ro.boot.emmc=true
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.data.large_tcp_window_size=true
ro.hdmi.enable=true
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=msm8974
ro.build.id=KOT49H
ro.build.date=Tue Apr 29 12:08:56 CST 2014
ro.build.date.utc=1398744536
ro.build.host=mcrd1-28
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=android
ro.build.display.id=OPEN_PadFone-userdebug 4.4.2 KOT49H OPEN_PadFone-11.9.0.118-20140429-F test-keys
ro.build.product=ASUS-T00D
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.version.incremental=OPEN_PadFone-11.9.0.118-20140429-F
ro.build.description=OPEN_PadFone-userdebug 4.4.2 KOT49H OPEN_PadFone-11.9.0.118-20140429-F test-keys
ro.build.characteristics=default
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.notification_sound=pixiedust.ogg
ro.secure=1
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.bootssn=07c8e1b5
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=OPEN_PadFone
ro.product.board=MSM8974
ro.product.brand=asus
ro.product.model=ASUS PadFone X
ro.product.device=ASUS-T00D
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=asus
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=qcom
ro.hardware.id=A91_ER2
ro.opengles.version=196608
ro.qualcomm.cabl=0
ro.revision=0
ro.bootloader=unknown
ro.debuggable=1
ro.factorytest=0
ro.use_data_netmgrd=true
dev.pm.dyn_samplingrate=1
log.tag.IMS=DEBUG
mmp.enable.3g2=true
net.bt.name=Android
net.gprs.volte=0
net.early.sockets=0
net.change=net.bt.name
ril.subscription.types=RUIM,RUIM
sys.tcpdump.file=/data/logcat_log/capture.pcap
use.voice.path.for.pcm.voip=true
conn.connectivity_change_delay=0
http.preconnect=false
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
qcom.hw.aac.encoder=true
rild.libargs=-d /dev/smd0
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
vidc.debug.level=1
wlan.tx.cap=0
audio.offload.buffer.size.kb=32
audio.offload.disable=0
debug.sf.hw=1
debug.egl.hw=1
debug.asus.qxdmlog.emmclog=/data/media
debug.mdpcomp.logs=0
debug.qualcomm.sns.hal=0
debug.qualcomm.sns.daemon=0
debug.qualcomm.sns.libsensor1=0
debug.composition.type=c2d
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-http=true
media.stagefright.enable-scan=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-player=true
media.aac_51_output_enabled=true
dalvik.vm.heapsize=256m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
tunnel.audio.encode=true
persist.cne.feature=0
persist.gps.qc_nlp_in_use=0
persist.hwc.mdpcomp.enable=true
persist.sys.pad.dpi=240
persist.sys.pad.width=1920
persist.sys.pad.height=1200
persist.sys.usb.config=mtp,adb
persist.sys.wfd.virtual=0
persist.sys.test.poweronoff=0
persist.sys.modem.restart=0
persist.sys.phone.dpi=480
persist.sys.phone.width=1080
persist.sys.phone.height=1920
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.logkit.ctrlcode=0
persist.sys.whitelist=/system/etc/whitelist_appops.xml
persist.sys.enableSMMI=2
persist.sys.downloadmode.enable=0
persist.sys.strict_op_enable=false
persist.usb.diag=1
persist.asus.audbg=1
persist.asus.p01dbg=0
persist.asus.qxdmlog.message=0
persist.asus.qxdmlog.sd1mmc0=0
persist.asus.qxdmlog.filesize=100
persist.asus.qxdmlog.maxfiles=6
persist.boot.runfsstress=0
persist.data.netmgrd.qos.enable=false
persist.demo.hdmirotationlock=false
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.fluence.speaker=false
persist.audio.fluence.voicerec=false
persist.audio.fluence.voicecall=true
persist.debug.wfd.enable=1
persist.radio.calls.on.ims=true
persist.radio.jbims=1
persist.radio.dont_use_dsd=true
persist.radio.add_power_save=1
persist.radio.csg_info_avlbl=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.use_se_table_only=1
persist.timed.enable=true
persist.speaker.prot.enable=false
persist.fuse_sdcard=true
persist.data_netmgrd_mtu=1410
ethernet.interface=eth0
ethernet.autoEnable=yes
keyguard.no_require_sim=true
bluetooth.hfp.client=1
telephony.lteOnCdmaDevice=0
DEVICE_PROVISIONED=1
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
Then we get the AT&T update ATT_A91-11.10.7.31-20140505_M3.15.53.P1-ota-user.zip
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Thu Jan 1 09:03:12 1970
recovery filesystem table
=========================
0 /system ext4 /dev/block/platform/msm_sdcc.1/by-name/system 0
1 /cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache 0
2 /data ext4 /dev/block/platform/msm_sdcc.1/by-name/userdata -16384
3 /sdcard vfat /dev/block/mmcblk1p1 0
4 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot 0
5 /recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery 0
6 /misc emmc /dev/block/platform/msm_sdcc.1/by-name/misc 0
7 /demoapp ext4 /dev/block/platform/msm_sdcc.1/by-name/demoapp 0
8 /tombstone ext4 /dev/block/platform/msm_sdcc.1/by-name/tombstones 0
9 /gmxt ext4 /dev/block/platform/msm_sdcc.1/by-name/gmxt 0
10 /tmp ramdisk ramdisk 0
I:Got arguments from /cache/recovery/command
locale is [(null)]
framebuffer: fd 4 (1080 x 1920)
hdmi_init(fb0_fd=4,framebuffer=0xb5f3c000)+++
using (fd=4)
id = mdssfb_80000
xres = 1080 px
yres = 1920 px
xres_virtual = 1080 px
yres_virtual = 3840 px
bpp = 16
finfo.smem_len = 0x1000000
open_fb1()+++
[Recovery] PIXEL_FORMAT = GGL_PIXEL_FORMAT_RGB_565
using (fd=5)
id = mdssfb_70000
xres = 1920 px
yres = 1200 px
xres_virtual = 1920 px
yres_virtual = 2400 px
bpp = 16
finfo.smem_len = 0x0
The ion mem device is opened successfully.
ION_IOC_ALLOC is successful.
ION_IOC_MAP is successful.
mmap is successful.
installing_text: (1 x 1 @ 1896)
erasing_text: (1 x 1 @ 1599)
no_command_text: (1 x 1 @ 1599)
error_text: (1 x 1 @ 1599)
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
[BL] int main(int, char**): Set backlight
Command: "/sbin/recovery" "--update_package=/data/media/ATT_A91-11.10.7.31-20140505_M3.15.53.P1-ota-user.zip" "--wipe_data"
af.resampler.quality=4
av.offload.enable=false
mm.enable.qcom_parser=37491
mm.enable.smoothstreaming=true
ro.qc.sdk.izat.service_mask=0x5
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sensors.step_counter=true
ro.qc.sensors.step_detector=true
ro.qc.sensors.smgr_mag_cal_en=false
ro.sf.lcd_density=480
ro.com.google.clientidbase=android-asus
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.cpu.id=107b80e1
ro.gps.agps_provider=1
ro.asus.factory=1
ro.boot.emmc=true
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.data.large_tcp_window_size=true
ro.hdmi.enable=true
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=msm8974
ro.build.id=KOT49H
ro.build.date=Tue Apr 29 12:08:56 CST 2014
ro.build.date.utc=1398744536
ro.build.host=mcrd1-28
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=android
ro.build.display.id=OPEN_PadFone-userdebug 4.4.2 KOT49H OPEN_PadFone-11.9.0.118-20140429-F test-keys
ro.build.product=ASUS-T00D
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.version.incremental=OPEN_PadFone-11.9.0.118-20140429-F
ro.build.description=OPEN_PadFone-userdebug 4.4.2 KOT49H OPEN_PadFone-11.9.0.118-20140429-F test-keys
ro.build.characteristics=default
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.notification_sound=pixiedust.ogg
ro.secure=1
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.bootssn=07c8e1b5
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=OPEN_PadFone
ro.product.board=MSM8974
ro.product.brand=asus
ro.product.model=ASUS PadFone X
ro.product.device=ASUS-T00D
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=asus
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=qcom
ro.hardware.id=A91_ER2
ro.opengles.version=196608
ro.qualcomm.cabl=0
ro.revision=0
ro.bootloader=unknown
ro.debuggable=1
ro.factorytest=0
ro.use_data_netmgrd=true
dev.pm.dyn_samplingrate=1
log.tag.IMS=DEBUG
mmp.enable.3g2=true
net.bt.name=Android
net.gprs.volte=0
net.early.sockets=0
net.change=net.bt.name
ril.subscription.types=RUIM,RUIM
sys.tcpdump.file=/data/logcat_log/capture.pcap
use.voice.path.for.pcm.voip=true
conn.connectivity_change_delay=0
http.preconnect=false
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
qcom.hw.aac.encoder=true
rild.libargs=-d /dev/smd0
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
vidc.debug.level=1
wlan.tx.cap=0
audio.offload.buffer.size.kb=32
audio.offload.disable=0
debug.sf.hw=1
debug.egl.hw=1
debug.asus.qxdmlog.emmclog=/data/media
debug.mdpcomp.logs=0
debug.qualcomm.sns.hal=0
debug.qualcomm.sns.daemon=0
debug.qualcomm.sns.libsensor1=0
debug.composition.type=c2d
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-http=true
media.stagefright.enable-scan=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-player=true
media.aac_51_output_enabled=true
dalvik.vm.heapsize=256m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
tunnel.audio.encode=true
persist.cne.feature=0
persist.gps.qc_nlp_in_use=0
persist.hwc.mdpcomp.enable=true
persist.sys.pad.dpi=240
persist.sys.pad.width=1920
persist.sys.pad.height=1200
persist.sys.usb.config=mtp,adb
persist.sys.wfd.virtual=0
persist.sys.test.poweronoff=0
persist.sys.modem.restart=0
persist.sys.phone.dpi=480
persist.sys.phone.width=1080
persist.sys.phone.height=1920
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.logkit.ctrlcode=0
persist.sys.whitelist=/system/etc/whitelist_appops.xml
persist.sys.enableSMMI=2
persist.sys.downloadmode.enable=0
persist.sys.strict_op_enable=false
persist.usb.diag=1
persist.asus.audbg=1
persist.asus.p01dbg=0
persist.asus.qxdmlog.message=0
persist.asus.qxdmlog.sd1mmc0=0
persist.asus.qxdmlog.filesize=100
persist.asus.qxdmlog.maxfiles=6
persist.boot.runfsstress=0
persist.data.netmgrd.qos.enable=false
persist.demo.hdmirotationlock=false
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.fluence.speaker=false
persist.audio.fluence.voicerec=false
persist.audio.fluence.voicecall=true
persist.debug.wfd.enable=1
persist.radio.calls.on.ims=true
persist.radio.jbims=1
persist.radio.dont_use_dsd=true
persist.radio.add_power_save=1
persist.radio.csg_info_avlbl=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.use_se_table_only=1
persist.timed.enable=true
persist.speaker.prot.enable=false
persist.fuse_sdcard=true
persist.data_netmgrd_mtu=1410
ethernet.interface=eth0
ethernet.autoEnable=yes
keyguard.no_require_sim=true
bluetooth.hfp.client=1
telephony.lteOnCdmaDevice=0
DEVICE_PROVISIONED=1
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
Finding update package...
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
I:Update location: /data/media/ATT_A91-11.10.7.31-20140505_M3.15.53.P1-ota-user.zip
Opening update package...
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
I:read key e=3 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
I:comment is 1484 bytes; signature 1466 bytes from end
MSMFB_OVERLAY_SET is successful.
.......................................................... Removed redundancy
MSMFB_OVERLAY_SET is successful.
MSMFB_OVERLAY_PLAY is successful.
MSMFB_DISPLAY_COMMIT is successful.
Then a second AT&T update. /sdcard/ATT_A91-11.10.8.7-20140527_M3.15.53.P1-ota-user.zip
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Fri Jan 16 07:54:23 1970
recovery filesystem table
=========================
0 /system ext4 /dev/block/platform/msm_sdcc.1/by-name/system 0
1 /cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache 0
2 /data ext4 /dev/block/platform/msm_sdcc.1/by-name/userdata -16384
3 /sdcard vfat /dev/block/mmcblk1p1 0
4 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot 0
5 /recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery 0
6 /misc emmc /dev/block/platform/msm_sdcc.1/by-name/misc 0
7 /demoapp ext4 /dev/block/platform/msm_sdcc.1/by-name/demoapp 0
8 /tombstone ext4 /dev/block/platform/msm_sdcc.1/by-name/tombstones 0
9 /gmxt ext4 /dev/block/platform/msm_sdcc.1/by-name/gmxt 0
10 /tmp ramdisk ramdisk 0
locale is [(null)]
framebuffer: fd 4 (1080 x 1920)
hdmi_init(fb0_fd=4,framebuffer=0xb5f82000)+++
using (fd=4)
id = mdssfb_80000
xres = 1080 px
yres = 1920 px
xres_virtual = 1080 px
yres_virtual = 3840 px
bpp = 16
finfo.smem_len = 0x1000000
open_fb1()+++
[Recovery] PIXEL_FORMAT = GGL_PIXEL_FORMAT_RGB_565
using (fd=5)
id = mdssfb_70000
xres = 1920 px
yres = 1200 px
xres_virtual = 1920 px
yres_virtual = 2400 px
bpp = 16
finfo.smem_len = 0x0
The ion mem device is opened successfully.
ION_IOC_ALLOC is successful.
ION_IOC_MAP is successful.
mmap is successful.
installing_text: (1 x 1 @ 1896)
erasing_text: (1 x 1 @ 1599)
no_command_text: (1 x 1 @ 1599)
error_text: (1 x 1 @ 1599)
[BL] int main(int, char**): Set backlight
Command: "/sbin/recovery"
af.resampler.quality=4
av.offload.enable=false
mm.enable.qcom_parser=37491
mm.enable.smoothstreaming=true
ro.qc.sdk.izat.service_mask=0x5
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sensors.step_counter=true
ro.qc.sensors.step_detector=true
ro.qc.sensors.smgr_mag_cal_en=false
ro.sf.lcd_density=480
ro.adb.secure=1
ro.com.google.gmsversion=4.4_r2
ro.com.google.clientidbase=android-asus
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.yt=android-asus
ro.com.google.clientidbase.gmm=android-asus
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.cpu.id=107b80e1
ro.gps.agps_provider=1
ro.ime.lowmemory=false
ro.asus.ui=1.0a
ro.boot.emmc=true
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.data.large_tcp_window_size=true
ro.hdmi.enable=true
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=msm8974
ro.build.id=KOT49H
ro.build.app.version=044000146_201312031220
ro.build.asus.sku=ATT
ro.build.asus.version=11.10.7.31
ro.build.asus.version.pensdk=1
ro.build.date=Mon May 5 16:17:50 CST 2014
ro.build.date.utc=1399277870
ro.build.host=mcrd1-13
ro.build.tags=release-keys
ro.build.type=user
ro.build.user=android
ro.build.display.id=ATT_11.10.7.31
ro.build.product=A91
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.version.incremental=ATT_PadFone-11.10.7.31-20140505
ro.build.description=ATT_PadFone-user 4.4.2 KOT49H ATT_PadFone-11.10.7.31-20140505 release-keys
ro.build.fingerprint=asus/ATT_PadFone/ASUS-T00D:4.4.2/KOT49H/ATT_PadFone-11.10.7.31-20140505:user/release-keys
ro.build.characteristics=default
ro.config.hwrlib=T9_arm
ro.config.xt9ime.max_subtype=7
ro.config.ringtone=Summer.ogg
ro.config.alarm_alert=Deep.ogg
ro.config.newmail_sound=NewEmail.ogg
ro.config.sentmail_sound=OnTheHunt.ogg
ro.config.notification_sound=NewMessage.ogg
ro.config.calendaralert_sound=CalendarEvent.ogg
ro.secure=1
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.bootssn=07c8e1b5
ro.carrier=unknown
ro.contact.simtype=1
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=ATT_PadFone
ro.product.board=MSM8974
ro.product.brand=asus
ro.product.model=ASUS PadFone X
ro.product.device=ASUS-T00D
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=asus
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=qcom
ro.hardware.id=A91_ER2
ro.opengles.version=196608
ro.qualcomm.cabl=0
ro.revision=0
ro.bootloader=unknown
ro.debuggable=0
ro.factorytest=0
ro.setupwizard.mode=OPTIONAL
ro.additionalbutton.operation=0
ro.use_data_netmgrd=true
dev.pm.dyn_samplingrate=1
drm.service.enabled=true
log.tag.IMS=DEBUG
mmp.enable.3g2=true
net.bt.name=Android
net.gprs.volte=0
net.early.sockets=0
net.change=net.bt.name
ril.subscription.types=RUIM,RUIM
sys.tcpdump.file=/data/logcat_log/capture.pcap
use.voice.path.for.pcm.voip=true
conn.connectivity_change_delay=0
http.preconnect=false
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
qcom.hw.aac.encoder=true
rild.libargs=-d /dev/smd0
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
vidc.debug.level=1
wlan.tx.cap=0
audio.offload.buffer.size.kb=32
debug.sf.hw=1
debug.egl.hw=1
debug.asus.qxdmlog.emmclog=/data/media
debug.mdpcomp.logs=0
debug.qualcomm.sns.hal=0
debug.qualcomm.sns.daemon=0
debug.qualcomm.sns.libsensor1=0
debug.composition.type=c2d
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-http=true
media.stagefright.enable-scan=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-player=true
media.aac_51_output_enabled=true
dalvik.vm.heapsize=256m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
tunnel.audio.encode=true
persist.cne.feature=0
persist.gps.qc_nlp_in_use=0
persist.hwc.mdpcomp.enable=true
persist.sys.pad.dpi=240
persist.sys.pad.width=1920
persist.sys.pad.height=1200
persist.sys.usb.config=mtp
persist.sys.wfd.virtual=0
persist.sys.test.poweronoff=0
persist.sys.modem.restart=12
persist.sys.phone.dpi=480
persist.sys.phone.width=1080
persist.sys.phone.height=1920
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.logkit.ctrlcode=0
persist.sys.padfone=1
persist.sys.whitelist=/system/etc/whitelist_appops.xml
persist.sys.enableSMMI=2
persist.sys.downloadmode.enable=0
persist.sys.strict_op_enable=false
persist.asus.cb.gcf.mode=0
persist.asus.audbg=0
persist.asus.p01dbg=0
persist.asus.browser.ua=
persist.asus.browser.uap=ASUS-A91
persist.asus.qxdmlog.message=0
persist.asus.qxdmlog.sd1mmc0=0
persist.asus.qxdmlog.filesize=100
persist.asus.qxdmlog.maxfiles=6
persist.boot.runfsstress=0
persist.data.netmgrd.qos.enable=false
persist.demo.hdmirotationlock=false
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.fluence.speaker=false
persist.audio.fluence.voicerec=false
persist.audio.fluence.voicecall=true
persist.debug.wfd.enable=1
persist.radio.calls.on.ims=true
persist.radio.jbims=1
persist.radio.dont_use_dsd=true
persist.radio.add_power_save=1
persist.radio.csg_info_avlbl=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.use_se_table_only=1
persist.timed.enable=true
persist.speaker.prot.enable=false
persist.fuse_sdcard=true
persist.data_netmgrd_mtu=1410
ethernet.interface=eth0
ethernet.autoEnable=yes
keyguard.no_require_sim=true
bluetooth.hfp.client=1
telephony.lteOnCdmaDevice=0
DEVICE_PROVISIONED=1
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/ATT_A91-11.10.8.7-20140527_M3.15.53.P1-ota-user.zip
Opening update package...
I:read key e=3 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1484 bytes; signature 1466 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
minzip: Extracted 2 file(s)
minzip: Extracted 2355 file(s)
symlink(): created [/system/etc/firmware/wcd9320]
Patching firmware images...
installing rpm
installing tz
installing aboot
installing sbl1
installing rpmbak
installing tzbak
installing abootbak
installing sbl1bak
installing DDR
installing modem
installing asusfw
script succeeded: result was [/system]
Install from sdcard complete.
I am working with Fastboot mode today (power+volume up).
Code:
[email protected]:~/Downloads$ sudo fastboot getvar product
product: MSM8974
finished. total time: 0.002s
[email protected]:~/Downloads$ sudo fastboot oem unlock
...
FAILED (remote: Security is Enable, close 'unlock' function !!)
finished. total time: 0.001s
[email protected]:~/Downloads$ sudo fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device authorized: false
(bootloader) Charger screen enabled: false
(bootloader) CPU PVS: 2
(bootloader) CPU overclocking: 0
(bootloader) SB=Y
(bootloader) eMMC HW RST : true
(bootloader) CPU type: 7b8
(bootloader) BOOT_COUNT : 317
OKAY [ 0.011s]
finished. total time: 0.011s
[email protected]:~/Downloads$ sudo fastboot getvar kernel
kernel: lk
finished. total time: 0.001s
It's not looking good so far. They've taken steps to ensure we cannot see the internals. There is no firmware flash available.
Towel Root works
Download here: http://towelroot.com/tr.apk
read more here: http://www.xda-developers.com/android/breaking-geohot-roots-the-verizon-galaxy-s5-with-towelroot/
AdamOutler said:
Towel Root works
Download here: http://towelroot.com/tr.apk
read more here: http://www.xda-developers.com/android/breaking-geohot-roots-the-verizon-galaxy-s5-with-towelroot/
Click to expand...
Click to collapse
Can anyone else verify this if so or if i can get a picture of hour device w root checker test plz i dont wanna spend if its not gonna work on my padfone x
IRusselldABear said:
Can anyone else verify this if so or if i can get a picture of hour device w root checker test plz i dont wanna spend if its not gonna work on my padfone x
Click to expand...
Click to collapse
I can confirm. Mine is rooted using TR. Works perfectly.
I just saw on Google+ that you got TWRP working. Just picked up this device myself. I'm pretty stoked, even if it's locked down...
dibblebill said:
I just saw on Google+ that you got TWRP working. Just picked up this device myself. I'm pretty stoked, even if it's locked down...
Click to expand...
Click to collapse
It's not as locked down as you might think. It just doesn't allow fastboot flashing.. That's fine, Exploit+terminal access works. Get the instructions for TWRP here: http://forum.xda-developers.com/showthread.php?t=2790542
www.towelroot.com he made a root for it use version 1
AdamOutler said:
It's not as locked down as you might think. It just doesn't allow fastboot flashing.. That's fine, Exploit+terminal access works. Get the instructions for TWRP here: http://forum.xda-developers.com/showthread.php?t=2790542
Click to expand...
Click to collapse
Aye. Towelroot, third person confirming working, use V1, not V2. V2 causes reboots and doesn't root. Additionally, Adam, solved the encryption issue. Kaspersky was at fault.
I don't see how you guys downloaded TR v1. The site only allows me to download v3, which doesn't work.
---------- Post added at 01:49 PM ---------- Previous post was at 01:05 PM ----------
Nevermind: http://towelroot.com/tr1.apk Duh
FUZER384 said:
I don't see how you guys downloaded TR v1. The site only allows me to download v3, which doesn't work.
---------- Post added at 01:49 PM ---------- Previous post was at 01:05 PM ----------
Nevermind: http://towelroot.com/tr1.apk Duh
Click to expand...
Click to collapse
yep, just be on the site and copy that link into your bar.
Nice just got the PadFone x. Glad to see some progress on this device.
Sent from my ASUS PadFone X using XDA Free mobile app
Yeah that or the ever so easy Google helps.
Sent from my ASUS PadFone X
I'm willing to pay to get development going on this bad boy.. stripped down barebones rom giggity gahhhh
alleyezondisromo said:
I'm willing to pay to get development going on this bad boy.. stripped down barebones rom giggity gahhhh
Click to expand...
Click to collapse
Absolutely. I'm DYING for a 4.4 AOSP build on it. Not that I don't like what little ASUS did with it, pure AOSP would be heaven on this device.
I believe that we must wait for asus to release the source code for that, and knowing att that might be never , here's to hoping !
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
All i want is aosp and f2fs compatibility to go with the 64gb sandisk extreme plus micro sd i just bought
alleyezondisromo said:
I believe that we must wait for asus to release the source code for that, and knowing att that might be never , here's to hoping !
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
All i want is aosp and f2fs compatibility to go with the 64gb sandisk extreme plus micro sd i just bought
Click to expand...
Click to collapse
Yeah. However, I have been tinkering a bit. The build we have is actually damn close to AOSP now. There's a couple of proprietary drivers that I've found. The biggest thing would be reverse engineering Dynamic Display.
How about relieving our gorgeous device from the **** att smeared in its OS?
---------- Post added at 06:25 AM ---------- Previous post was at 06:25 AM ----------
Ohh this is so exciting :>
alleyezondisromo said:
How about relieving our gorgeous device from the **** att smeared in its OS?
---------- Post added at 06:25 AM ---------- Previous post was at 06:25 AM ----------
Ohh this is so exciting :>
Click to expand...
Click to collapse
Towelroot + Appwererabbit == no more bloat. There were some things I was hesitant to remove (most of the Asus stuff until I can look at those closer), but all the AT&T crap is gone. [emoji4][emoji4][emoji4]
alleyezondisromo said:
I believe that we must wait for asus to release the source code for that, and knowing att that might be never , here's to hoping !
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
All i want is aosp and f2fs compatibility to go with the 64gb sandisk extreme plus micro sd i just bought
Click to expand...
Click to collapse
I submitted a request to Asus support, for "source code and a stock firmware" on 27jun14 at 18:16(CST).
Today, 1July14 at 01:24(CST), a USA representative, named Emma Zhang [email protected] stated:
Emma Zhang from ASUS Product Support Team said:
Dear Adam,
Thank you for contacting ASUS Customer Service.
My name is Emma and it is my pleasure to help you with your problem.
Up till now, we don't have that kind of material but I will tranfer customer's wish and suggestion to related department in Taipei for further development. Sorry for the inconvience and thanks for your kindly understanding.
Best Regards,
Emma
ASUS Product Support Team
888-678-3688
Click to expand...
Click to collapse
Related
Hello. I installed the root and upgraded to ICS according the tutorial, all was a success, but when i restarted the device only show the logo of sony and the screen stays in black, i tried to reflash the hack_recovery and fail (Error in tmp/desklunvr/desklunvr.zip), and i tried to flash the version 3.2.1 r2 but it's fail again, the file recovery.log shows:
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_001-ota-0042.001.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Checking version is passed, 111104048 -> 111201009
Not found detailed sku[27550199] in META-INF/com/android/detailedSKU.lst
Erohibit update as a result of checking version or base sku
Installation aborted.
My prop is:
ro.sony.sku.version=27550108_11
ro.camera.sound.forced=0
ro.product.locale.language=es
ro.product.locale.region=ES
ro.pss.gamepad.buttonmeaning=cross-enter
ro.sony.network.wwan=0
ro.sony.sku.country=Mexico
ro.sony.sku.detailed=27550199
ro.sony.update.category_id=ST002
ro.sony.volume_limit=0
ro.sony.wm.atrac=0
ro.sony.wm.clearphase_path=SGPT1_001.LPS
ro.sony.wm.xloud_path=SGPT1_001.XLD
Please Help me!!
first try wipe.
if still no correct boot, then flash this one:
http://bit.ly/J2FglO
and do wipe just after flash! very important,
its described in AiO thread, FAQ section, downgrade info.
then you can root again, and flash ICS prerooted again.
br
condi
PS. oh and btw - your tab has working region.zip, incremental lowered,
dont be affraid, its gonna work 1st try wipe !
That works!!!
I really appreciate this, I will invite you a beer; The wipe wasn't work but i reflash with the file that you give me and that resolved my problem.
Thank you.
Hi Condi,
I have rooted US ICS firmware (fully functional) and I have changed the build.prop with a previous HoneyComb version and done a full wipe via recovery; now I have bootloop when the tablet start (I can only see boot animation).
Because I live in Italy and I have the Italy version of sony tablet s I have tried to update from recovery with latest Italy ICS firmware version (signed-nbx03_009-ota-120410021.zip - I have Wifi only tablet version) but without success: I receive this message
Erohibit update as a result of checking version or base sku
this is my revovery.log
Starting recovery on Sun Jun 3 18:56:31 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /configs ext2 /dev/block/mmcblk0p1 (null) 0
2 /system0 ext4 /dev/block/mmcblk0p2 (null) 0
3 /system1 ext4 /dev/block/mmcblk0p3 (null) 0
4 /cache ext4 /dev/block/mmcblk0p4 (null) 0
5 /misc emmc /dev/block/mmcblk0p5 (null) 0
6 /staging ext4 /dev/block/mmcblk0p6 (null) 0
7 /blflags ext4 /dev/block/mmcblk0p7 (null) 0
8 /datapp ext4 /dev/block/mmcblk0p8 (null) 0
9 /log ext4 /dev/block/mmcblk0p9 (null) 0
10 /data ext4 /dev/block/mmcblk0p10 (null) 0
11 /vsdcard vfat /dev/block/mmcblk0p11 (null) 0
12 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
13 /boot emmc boot (null) 0
14 /recovery emmc recovery (null) 0
15 /system ext4 system (null) 0
16 /vendor0 ext4 /datapp/vendor/vendor0.img (null) 0
17 /vendor1 ext4 /datapp/vendor/vendor1.img (null) 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0077
ro.build.display.id=TISU0077
ro.build.version.incremental=120410002
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Tue Apr 10 01:08:41 JST 2012
ro.build.date.utc=1333987721
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build9
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_001
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_001-user 4.0.3 TISU0077 120410002 test-keys
ro.build.fingerprint=Sony/SYS_001/nbx03:4.0.3/TISU0077/120410002:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0.3_r0
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna.dtcp_pext=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.adbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_009-ota-120410021.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Checking version is passed, 111104048 -> 120410021
Not found detailed sku[27550240] in META-INF/com/android/detailedSKU.lst
Erohibit update as a result of checking version or base sku
Installation aborted.
and this my region.prop
ro.sony.sku.version=27550240_5
ro.camera.sound.forced=0
ro.product.locale.language=it
ro.product.locale.region=IT
ro.pss.gamepad.buttonmeaning=cross-enter
ro.sony.network.wwan=1
ro.sony.sku.country=Italy
ro.sony.sku.detailed=27550240
ro.sony.update.category_id=ST003
ro.sony.volume_limit=0
ro.sony.wm.atrac=0
ro.sony.wm.clearphase_path=SGPT1_001.LPS
ro.sony.wm.xloud_path=SGPT1_001.XLD
this is the build.prop that I have copied
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=THMAS0042
ro.build.display.id=THMAS0042
ro.build.version.incremental=0042.002
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2.1
ro.build.date=Thu Dec 1 03:26:16 JST 2011
ro.build.date.utc=1322677576
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=release-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=nbx03_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=nbx03
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=nbx03_009-user 3.2.1 THMAS0042 0042.002 release-keys
ro.build.fingerprint=Sony/nbx03_002/nbx03:3.2.1/THMAS0042/0042.002:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
ro.sony.sound.enabled=true
ro.separated.external.storage=true
ro.external.storage.removable=false
ro.tether.denied=true
windowsmgr.max_events_per_sec=120
ro.sony.display.release=release2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.2_r4
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.com.google.clientidbase=android-sony
ro.sony.wifisleep=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.sony.update.service_id=nbx03_009
ro.sony.sku.base=nbx03_009
ro.sony.build.id=THMAS0092400
ro.sony.build.incremental=111201028
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.setupwizard.mode=DISABLED
ro.sony.wan.ipv6.enable=false
ro.sony.stayawake.hidden=false
ro.sony.wan.fixed_apns=0
Is there any possibility to restore my tablet?
thank you very much ENx
P.S.: I have also tried to install the 3.2.1-r2 firmware (signed-nbx03_009-ota-0042.002.zip) version with the same result
Phone is S-ON running Scotts Clean Rom ICS Standard, installed using the following method from his thread:
Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
Reboot to recovery
wipe data / Factory Reset
Flash ROM
Flash GB Fimrware Patch
Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
Reboot
Click to expand...
Click to collapse
I don't know if there is something about doing all that which is pissing off AmonRa, but I cannot make backups now. Here is the error log, can anyone help?!
Code:
Starting recovery on Wed Sep 19 02:21:13 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (720 x 1280)
RA Revamped
Build : RA-VIGOR-v3.13-getitnowmarketing
Command: "/sbin/recovery"
ro.secure=0
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
ro.ril.oem.ecclist=911,*911,#911
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.def.agps.mode=6
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.oem.show.act=0
ro.ril.enable.gea3=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.vs=android-verizon
ro.com.google.clientidbase.gmm=android-verizon
ro.com.google.clientidbase.ms=android-verizon
ro.product.model=ADR6425LVW
ro.aa.rid=224
ro.aa.skulist=605
ro.aa.customizationid=249206
ro.aa.taskid=221384
ro.aa.project=Vigor
ro.aa.mainsku=605
ro.aa.modelid=PH9810000
ro.aa.romver=1.02.605.6
ro.aa.maincid=VZW__001
ro.aa.cidlist=VZW__001
ro.build.id=GRJ22
ro.build.display.id=GRJ22
ro.build.version.incremental=183296.6
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=日 10月 16 18:07:00 CST 2011
ro.build.date.utc=1318759620
ro.build.type=user
ro.build.user=root
ro.build.host=ABM019
ro.build.tags=release-keys
ro.product.brand=verizon_wwe
ro.product.name=htc_vigor
ro.product.device=vigor
ro.product.board=vigor
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=vigor
ro.build.description=1.02.605.6 CL183296 release-keys
ro.build.changelist=183296
ro.product.ua=
ro.build.fingerprint=verizon_wwe/htc_vigor/vigor:2.3.4/GRJ22/183296.6:user/release-keys
ro.build.project=<CupcakeSKU.SKUInfo instance at 0xfa01b8>:221384
ro.product.version=1.02.605.6
ro.build.languageremove=0
ro.build.sense.version=3.5
keyguard.no_require_sim=1
ro.sf.lcd_density=320
debug.fb.rgb565=0
debug.composition.type=c2d
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
persist.data_netmgrd_mtu=1428
ro.config.lte=true
ro.config.svlte1x=true
persist.radio.adb_log_on=1
ro.cdma.data_retry_config=max_retries=infinite,0,0,60000,120000,480000,900000
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
ro.ril.enable.dtm=0
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.telephony.default_network=8
wifi.interface=eth0
wifi.supplicant_scan_interval=30
ro.opengles.version=131072
dalvik.vm.heapsize=48m
ro.ril.disable.power.collapse=1
ro.ril.enable.prl.recognition=1
ro.baseband.arch=svlte2a
ro.phone_storage=0
ro.ext4fs=1
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN=http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN=http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url=http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN=http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url=http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN=http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url=http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN=http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
ro.config.htc.nocheckin=1
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.bt.profiles=4270339
service.brcm.bt.activation=0
service.brcm.bt.srv_active=0
service.brcm.bt.hcid_active=0
service.brcm.bt.btld=0
service.brcm.bt.btld_pid=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.local_name=
persist.sys.shutdown.mode=hibernate
ro.htc.common.version=2.0.0.0
ro.product.processor=1.5 GHz dualcore
ro.product.ram=1GB
ro.product.display_resolution=4.3 inch 720p resolution
ro.product.main_camera=8M
ro.product.front_camera=2M
ro.product.bluetooth=3.0
ro.product.wifi=802.11 b/g/n
ro.cdma.home.operator.numeric=310012
ro.cdma.home.operator.alpha=Verizon
ro.htc.device.slot1=RUIM
ro.htc.framework.screencapture=true
ro.HorizontalVVM=true
ro.HorizontalBUA=true
ro.modem.load.release_key=true
profiler.anr_dump_native_uid=9999
ro.sdcard2=1
keydispatchtimeout=15000
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.fluence.enable=1
htc.audio.hac.enable=1
lpa.decode=false
ro.setupwizard.enterprise_mode=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.modversion=RA-VIGOR-v3.13-getitnowmarketing
ro.factorytest=0
dev.silent_reboot=0
ro.serialno=HT19YS207501
ro.bootmode=recovery
ro.baseband=0.95.00.1017_2r/0.95.00.1013r
ro.carrier=COMMON
ro.bootloader=2.10.0000
dev.bootreason=
ro.hardware=vigor
ro.revision=2
ro.devicerev=2
ro.engineerid=2
ro.lb=1
ro.cid=VZW__001
ro.mid=PH9810000
ro.emmc=1
ro.pagesize=2048
init.svc.choice_fn=stopped
init.svc.htcbatt=running
init.svc.adbd=running
init.svc.rmt_storage=running
ro.9kramdump=0
init.svc.recovery=running
ro.boot.block=/dev/block/mmcblk0p22
ro.recovery.block=/dev/block/mmcblk0p23
ro.misc.block=/dev/block/mmcblk0p24
ro.sdcard.block=/dev/block/mmcblk1p1
ro.sd-ext.block=/dev/block/mmcblk1p2
ro.internal_sdcard.block=/dev/block/mmcblk0p37
ro.ums.path=/sys/devices/platform/usb_mass_storage/lun0/file
ro.htcmodelid=PH9810000
*** WARNING ***
Nandroid backups require minimum
700mb SDcard space and may take a few
minutes to back up!
Compressed backups may take 30+ minutes!!
Use Other/recoverylog2sd for errors.
Create Nandroid backup?
Press Power to confirm,
any other key to abort.
Performing backup : .
nandroid-mobile v2.2.3
Using G1 keyboard, enter a prefix substring and then <CR>
or just <CR> to accept default: Accepting default.
Using - prefix to create a backup folder
mounting system and data read-only, sdcard read-write
...checking free space on sdcard
Error: not enough free space available on sdcard (need 700mb), aborting.
Oops... something went wrong!
Please check the recovery log!
Move recovery.log to SD
Press Power to confirm,
any other key to abort.
Moving : .unmounting /devlog
unmounting /cache
Is there enough space on the sd card?
Sent from my HTC Rezound using xda app-developers app
agless said:
Is there enough space on the sd card?
Sent from my HTC Rezound using xda app-developers app
Click to expand...
Click to collapse
Are you on AmenRa 3.15? and did you wipe external sd? Maybe there is a problem with one of those two things.. http://androidforums.com/rezound-all-things-root/507018-amonra-issues.html check out that thread. If that works, let me know.
Mod Edit: This has not been patched with the Sudden Death Syndrome fix, please do not flash until the OP fixes this
Thanks to chainfire remind me, You are my idol!
I in order to reduce the size of cache.img, using the wrong parameters,I am very sorry.
If you have used "cwm6-root-note2.tar" file(before October 11th). to get root, Your phone cache partition size will only 5M, If your cache partition larger than 100M does not have this issue.
Reboot into recovery, Do "wipe cache" will be able to solve this issue.
The error file has been deleted.
Update CWM Recovery(2012/10/14):
Update CWM Recovery to 6.0.1.5.
Change log detail in here:https://github.com/CyanogenMod/android_bootable_recovery/commits/jellybean
Fix errors, and add the option to install zip from adb sideload.
Download:
CWM Recovery(Flash via odin): cwm6-recovery-n7100-121014.tar
CWM Recovery(Flash via CWM Recovery): cwm6-recovery-n7100-121014.zip
CWM Recovery with auto root(Unrar, Flash cwm6-root-n7100.tar via odin): cwm6-root-n7100-121015.rarUpdate auto root package(2012/10/12):
Thanks chainfire.
CWM Recovery(121011) with root.
Fixed wrong cache partition size.
Download:
CWM Recovery with auto root(Unrar, Flash cwm-root-note2.tar.md5 via odin):cwm6-root-n7100.rarUpdate CWM Recovery(2012/10/11):Default backup format is tar.
Add backup prompt(thanks ChodTheWacko).
Fix dd command(detail).
Download:
CWM Recovery(Flash via odin):cwm6-recovery-n7100-121011.tar 13f11ca9f299f38ca79e7b125d0c5a9f
CWM Recovery(Flash via CWM Recovery):cwm6-recovery-n7100-121011.zip 632235fb1fb139efd3586ce422e2c7b6First upload(2012/09/23):
Download:
N7100 CWM Recovery(tested): cwm6-recovery-note2.tar.md5
I317 CWM Recovery(tested): cwm6-recovery-i317.tar.md5
Mirror:
cwm6-recovery-note2.tar.md5
cwm6-recovery-i317.tar.md5Usage:-Reboot device to download mode
-Open odin and select downloaded file for PDA tab
-Connect device to PC, and wait till device successfully added to com port
-Flash
-Use Triangle away reset flash counter(thanks chainfire).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's no phone, there's no root but you're posting a CWM?
L.E.: Saw the root.. where did you got these?
ionutzm05 said:
There's no phone, there's no root but you're posting a CWM?
L.E.: Saw the root.. where did you got these?
Click to expand...
Click to collapse
My friend have this phone,I have to do a test on this phone.
This is I317 inf:
Code:
C:\adb>adb shell cat /proc/partitions
major minor #blocks name
179 0 15388672 mmcblk0
179 1 4096 mmcblk0p1
179 2 4096 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 4096 mmcblk0p4
179 5 4096 mmcblk0p5
179 6 4096 mmcblk0p6
179 7 8192 mmcblk0p7
179 8 8192 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 90112 mmcblk0p10
179 11 262144 mmcblk0p11
179 12 1310720 mmcblk0p12
179 13 1835008 mmcblk0p13
179 14 20480 mmcblk0p14
179 15 8192 mmcblk0p15
259 0 11788288 mmcblk0p16
C:\adb>adb shell mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p13 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p3 /efs ext4 rw,nosuid,nodev,noatime,barrier=1,journal_async_commit,data=ordered 0 0
/dev/block/mmcblk0p12 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,journal_async_commit,data=ordered 0 0
/dev/block/mmcblk0p16 /data ext4 rw,nosuid,nodev,noatime,barrier=1,journal_async_commit,data=ordered,noauto_da_alloc,discard 0 0
/dev/block/mmcblk0p11 /tombstones ext4 rw,nosuid,nodev,noatime,barrier=1,journal_async_commit,data=ordered 0 0
/dev/block/mmcblk0p10 /firmware vfat ro,relatime,fmask=0133,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0
/sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0
/dev/fuse /storage/sdcard0 fuse rw,nosuid,nodev,noexec,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
I guess this should be flashed with Odin... A step by step guide in OP. Is that too much to ask?
Edit: Btw. The Note 2 should have some kind of binary counter. How will this affect that?
Reb0rn said:
I guess this should be flashed with Odin... A step by step guide in OP. Is that too much to ask?
Edit: Btw. The Note 2 should have some kind of binary counter. How will this affect that?
Click to expand...
Click to collapse
reset the flash counter may have to wait for "Triangle Away" update.
hopefully support can be added for the R950, if it doesn't work anyway!
Entropy and some other elite devs managed to root via stock recovery(process does not affect any counter) ... And they will do the same for note 2... Just wait until they do their magic and for some awesome kernel developer to hit the forum.. Francisco Franco like...
Not to offend anyone but the experience from note 1 and brick bug its keeping me away from flashing anything that hasn't been proved to be safe..
Cheers and grats on the early development
Enviado desde mi GT-N7000 usando Tapatalk 2
root via stock recovery only s2 & note.
s3 & note2 Has not supported test-key.
New emmc has no brick bug,s3 has no brick bug.
Chenglu said:
root via stock recovery only s2 & note.
s3 & note2 Has not supported test-key.
New emmc has no brick bug,s3 has no brick bug.
Click to expand...
Click to collapse
Has it been confirmed that it has a new emmc version?
Whats is the difference between "N7100" file and "Cwm Recovery & Auto Root" file please?
man2003 said:
Whats is the difference between "N7100" file and "Cwm Recovery & Auto Root" file please?
Click to expand...
Click to collapse
"N7100" file: CWM Recovery for N7100.
“Cwm Recovery & Auto Root” file: CWM Recovery for N7100 + Root file(auto root)
Chenglu said:
N7100 only have CWM Recovery.
Cwm Recovery & Auto Root have CWM Recovery & auto root。
Click to expand...
Click to collapse
What does that mean?
eRode said:
What does that mean?
Click to expand...
Click to collapse
I assume It means what it means.
Some people only want recovery, so they can make backups and flash simple things like battery meters or whatever.
Some people want both CWM recovery and root.
ChodTheWacko said:
I assume It means what it means.
Some people only want recovery, so they can make backups and flash simple things like battery meters or whatever.
Some people want both CWM recovery and root.
Click to expand...
Click to collapse
Thanks...the part where he said "N7100 only have CWM Recovery" confused the crap out of me
ChodTheWacko said:
I assume It means what it means.
Some people only want recovery, so they can make backups and flash simple things like battery meters or whatever.
Some people want both CWM recovery and root.
Click to expand...
Click to collapse
Yes, right.
Chenglu said:
N7100 CWM Recovery(tested): https://hotfile.com/dl/173473030/db8ad9e/cwm6-recovery-note2.tar.md5.html
I317 CWM Recovery(tested): https://hotfile.com/dl/173471997/77a7b44/cwm6-recovery-i317.tar.md5.html
N7100 CWM Recovery & Auto Root(tested): https://hotfile.com/dl/173886342/c0717bb/cwm6-root-note2.tar.html
Mirror: https://www.dropbox.com/sh/52kmxvm8hnrvxzf/xj6iY-GDnR
-Reboot device to download mode
-Open odin and select downloaded file for PDA tab
-Connect device to PC, and wait till device successfully added to com port
-Flash
Click to expand...
Click to collapse
Do you have a copy of the build.prop file? I kind of fxxk it up and I forgot to backup the file. Mine is N7100. Thanks
Sent from my HI Note
Madcow29 said:
Do you have a copy of the build.prop file? I kind of fxxk it up and I forgot to backup the file. Mine is N7100. Thanks
Sent from my HI Note
Click to expand...
Click to collapse
N7100:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.N7100XXALI3
ro.build.version.incremental=N7100XXALI3
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Wed Sep 5 05:42:21 KST 2012
ro.build.date.utc=1346791341
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-91
ro.build.tags=release-keys
ro.product.model=GT-N7100
ro.product.brand=samsung
ro.product.name=t03gxx
ro.product.device=t03g
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=false
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t03g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t03gxx-user 4.1.1 JRO03C N7100XXALI3 release-keys
ro.build.fingerprint=samsung/t03gxx/t03g:4.1.1/JRO03C/N7100XXALI3:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=N7100XXALI3
ro.build.hidden_ver=N7100XXALI3
ro.build.changelist=121996
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.1_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
I317:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.I317UCALI6
ro.build.version.incremental=I317UCALI6
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Tue Sep 11 00:51:42 KST 2012
ro.build.date.utc=1347292302
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-96
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=t0lteatt
ro.product.device=t0lteatt
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=false
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t0lteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0lteatt-user 4.1.1 JRO03C I317UCALI6 release-keys
ro.build.fingerprint=samsung/t0lteatt/t0lteatt:4.1.1/JRO03C/I317UCALI6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCALI6
ro.build.hidden_ver=I317UCALI6
ro.build.changelist=143071
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=ATT_Firefly.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Chenglu said:
N7100:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.N7100XXALI3
ro.build.version.incremental=N7100XXALI3
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Wed Sep 5 05:42:21 KST 2012
ro.build.date.utc=1346791341
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-91
ro.build.tags=release-keys
ro.product.model=GT-N7100
ro.product.brand=samsung
ro.product.name=t03gxx
ro.product.device=t03g
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=false
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t03g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t03gxx-user 4.1.1 JRO03C N7100XXALI3 release-keys
ro.build.fingerprint=samsung/t03gxx/t03g:4.1.1/JRO03C/N7100XXALI3:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=N7100XXALI3
ro.build.hidden_ver=N7100XXALI3
ro.build.changelist=121996
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.1_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
I317:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=JRO03C.I317UCALI6
ro.build.version.incremental=I317UCALI6
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Tue Sep 11 00:51:42 KST 2012
ro.build.date.utc=1347292302
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-96
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=t0lteatt
ro.product.device=t0lteatt
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=false
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t0lteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0lteatt-user 4.1.1 JRO03C I317UCALI6 release-keys
ro.build.fingerprint=samsung/t0lteatt/t0lteatt:4.1.1/JRO03C/I317UCALI6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCALI6
ro.build.hidden_ver=I317UCALI6
ro.build.changelist=143071
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=ATT_Firefly.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
Can u make a flashable zip file just to replace the build.prop? My note 2 won't start at the moment, thank you so much for your help
Sent from my HI Note
Madcow29 said:
Can u make a flashable zip file just to replace the build.prop? My note 2 won't start at the moment, thank you so much for your help
Sent from my HI Note
Click to expand...
Click to collapse
Try this.
Chenglu said:
Try this.
Click to expand...
Click to collapse
It works. Thank you so much
Sent from my GT-N7100 using xda app-developers app
Hi all
after an Update wit the All IN One Tool my Tablet stucks on the Sony logo.
i tried many different roms in recovery mode but none worked for me?
adb is working but not adb shell
here is my recovery log
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-120803071.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Fail to symlink /datapp/vendor/vendor1 to /tmp/prev_vendor: File exists
Erohibit update as a result of checking version or base sku
Installation aborted.
serialkiller said:
Hi all
after an Update wit the All IN One Tool my Tablet stucks on the Sony logo.
i tried many different roms in recovery mode but none worked for me?
adb is working but not adb shell
here is my recovery log
Code:
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-120803071.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Fail to symlink /datapp/vendor/vendor1 to /tmp/prev_vendor: File exists
E:Prohibit update as a result of checking version or base sku
Installation aborted.
Click to expand...
Click to collapse
Guessing you use Flasher and not AiO. Anyway the first partition is not doing to well..... You could try to flash twice in a row then pull recovery.log again. This will force the tablet to try and install on the second partition. Your other option would be to flash a rootable HC i.e. 3.2.1R2 as HC did not use vendor files. From there you could root and use flasher again. Either way let us know what happens.
Stifilz
Starting recovery on Tue Oct 22 06:18:25 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /configs ext2 /dev/block/mmcblk0p1 (null) 0
2 /system0 ext4 /dev/block/mmcblk0p2 (null) 0
3 /system1 ext4 /dev/block/mmcblk0p3 (null) 0
4 /cache ext4 /dev/block/mmcblk0p4 (null) 0
5 /misc emmc /dev/block/mmcblk0p5 (null) 0
6 /staging ext4 /dev/block/mmcblk0p6 (null) 0
7 /blflags ext4 /dev/block/mmcblk0p7 (null) 0
8 /datapp ext4 /dev/block/mmcblk0p8 (null) 0
9 /log ext4 /dev/block/mmcblk0p9 (null) 0
10 /data ext4 /dev/block/mmcblk0p10 (null) 0
11 /vsdcard vfat /dev/block/mmcblk0p11 (null) 0
12 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
13 /boot emmc boot (null) 0
14 /recovery emmc recovery (null) 0
15 /system ext4 system (null) 0
16 /vendor0 ext4 /datapp/vendor/vendor0.img (null) 0
17 /vendor1 ext4 /datapp/vendor/vendor1.img (null) 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-120803071.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Fail to symlink /datapp/vendor/vendor1 to /tmp/prev_vendor: File exists
Erohibit update as a result of checking version or base sku
Installation aborted.
Starting recovery on Tue Oct 22 06:19:37 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /configs ext2 /dev/block/mmcblk0p1 (null) 0
2 /system0 ext4 /dev/block/mmcblk0p2 (null) 0
3 /system1 ext4 /dev/block/mmcblk0p3 (null) 0
4 /cache ext4 /dev/block/mmcblk0p4 (null) 0
5 /misc emmc /dev/block/mmcblk0p5 (null) 0
6 /staging ext4 /dev/block/mmcblk0p6 (null) 0
7 /blflags ext4 /dev/block/mmcblk0p7 (null) 0
8 /datapp ext4 /dev/block/mmcblk0p8 (null) 0
9 /log ext4 /dev/block/mmcblk0p9 (null) 0
10 /data ext4 /dev/block/mmcblk0p10 (null) 0
11 /vsdcard vfat /dev/block/mmcblk0p11 (null) 0
12 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
13 /boot emmc boot (null) 0
14 /recovery emmc recovery (null) 0
15 /system ext4 system (null) 0
16 /vendor0 ext4 /datapp/vendor/vendor0.img (null) 0
17 /vendor1 ext4 /datapp/vendor/vendor1.img (null) 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-120803071.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Fail to symlink /datapp/vendor/vendor1 to /tmp/prev_vendor: File exists
Erohibit update as a result of checking version or base sku
Installation aborted.
i did it two times
so i think i have to find the Honeycomp Flash Rom to make it work
Thanks for the reply
i have to check the right HC Rom Version for my language??
can i use USA or the China version to?
serialkiller said:
Thanks for the reply
i have to check the right HC Rom Version for my language??
can i use USA or the China version to?
Click to expand...
Click to collapse
Try the USA version. If not condi should have the Poland version (016)
stifilz said:
Try the USA version. If not condi should have the Poland version (016)
Click to expand...
Click to collapse
i tried all versions chinese, usa and also austrian, switzerland and poland nothing worked
evry time 2 times i tried.
i will bring it back to the shop because i have no time to test any thinks here
thanks for your support
serialkiller said:
Fail to symlink /datapp/vendor/vendor1 to /tmp/prev_vendor: File exists
Erohibit update as a result of checking version or base sku
Installation aborted.
i did it two times
Click to expand...
Click to collapse
Youve got to show us recovery log after 1st flash attempt.
There should be info about the source of your problem - higher incremental,
or other sku region fw.
1) only one flash attempt,
2) pull recovery log.
br
condi
condi said:
Youve got to show us recovery log after 1st flash attempt.
There should be info about the source of your problem - higher incremental,
or other sku region fw.
1) only one flash attempt,
2) pull recovery log.
br
condi
Click to expand...
Click to collapse
Very off topic but condi, it is good to see you, I have two questions, first, how did you manage to sklunvring the hack_recovery? And how many times did you get in the apx mode?
Thank you(it is really good to see you.)
Sent from my Sony Tablet S using xda app-developers app
serialkiller said:
i tried all versions chinese, usa and also austrian, switzerland and poland nothing worked
evry time 2 times i tried.
i will bring it back to the shop because i have no time to test any thinks here
thanks for your support
Click to expand...
Click to collapse
Needs to be HC tho as it does not care abour the vendor folder
Sent from my GT-I9300 using xda app-developers app
smgdev said:
Very off topic but condi, it is good to see you, I have two questions, first, how did you manage to sklunvring the hack_recovery? And how many times did you get in the apx mode?
Thank you(it is really good to see you.)
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Im still here still got my grandma STS.
1] hack_recovery is regular small stock update - genuine one. - just took it from s.ony servers when it was available
its unmodified, used s.ony power by itself
2] how many apx? MANY times, especially when making some tests with rooting etc. - with a lot of reboots. after some (few/several) reboots it stayed on blank black screen - recognized as nvflash device in device manager
condi said:
Im still here still got my grandma STS.
1] hack_recovery is regular small stock update - genuine one. - just took it from s.ony servers when it was available
its unmodified, used s.ony power by itself
2] how many apx? MANY times, especially when making some tests with rooting etc. - with a lot of reboots. after some (few/several) reboots it stayed on blank black screen - recognized as nvflash device in device manager
Click to expand...
Click to collapse
@condi
thanks for your support i will send the latest recovery.log file today
so it would be very nice if you can help me
bg
serialkiller said:
@condi
thanks for your support i will send the latest recovery.log file today
so it would be very nice if you can help me
bg
Click to expand...
Click to collapse
here it is the latest recovery.log
bg
Starting recovery on Thu Oct 24 07:54:21 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /configs ext2 /dev/block/mmcblk0p1 (null) 0
2 /system0 ext4 /dev/block/mmcblk0p2 (null) 0
3 /system1 ext4 /dev/block/mmcblk0p3 (null) 0
4 /cache ext4 /dev/block/mmcblk0p4 (null) 0
5 /misc emmc /dev/block/mmcblk0p5 (null) 0
6 /staging ext4 /dev/block/mmcblk0p6 (null) 0
7 /blflags ext4 /dev/block/mmcblk0p7 (null) 0
8 /datapp ext4 /dev/block/mmcblk0p8 (null) 0
9 /log ext4 /dev/block/mmcblk0p9 (null) 0
10 /data ext4 /dev/block/mmcblk0p10 (null) 0
11 /vsdcard vfat /dev/block/mmcblk0p11 (null) 0
12 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
13 /boot emmc boot (null) 0
14 /recovery emmc recovery (null) 0
15 /system ext4 system (null) 0
16 /vendor0 ext4 /datapp/vendor/vendor0.img (null) 0
17 /vendor1 ext4 /datapp/vendor/vendor1.img (null) 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-0042.004.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
prev version[121116070] is larger than post version[111201022]
Erohibit update as a result of checking version or base sku
Installation aborted.
condi said:
Im still here still got my grandma STS.
1] hack_recovery is regular small stock update - genuine one. - just took it from s.ony servers when it was available
its unmodified, used s.ony power by itself
2] how many apx? MANY times, especially when making some tests with rooting etc. - with a lot of reboots. after some (few/several) reboots it stayed on blank black screen - recognized as nvflash device in device manager
Click to expand...
Click to collapse
Can you still go into apx mode?
Sent from my Sony Tablet S using xda app-developers app
serialkiller said:
Hi all
after an Update wit the All IN One Tool my Tablet stucks on the Sony logo.
i tried many different roms in recovery mode but none worked for me?
adb is working but not adb shell
.....
Click to expand...
Click to collapse
Guys sorry to ask here, I am stucks on the Sony logo and I can't get to the android Recovery!
Can i Use ADB to push the recovery or try to recovery my tablet???
Much like the guys above
Thought it best to ask here rather than start yet another thread.
My problem is that after using AIO successfully, I used the Flasher and obviously messed up. Now I find that adb can't find my device and trying to update from sd card isn't working. I have even tried a factory reset and still no joy. Any ideas, before I give Sony more money?
serialkiller said:
here it is the latest recovery.log
bg
Code:
Starting recovery on Thu Oct 24 07:54:21 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /configs ext2 /dev/block/mmcblk0p1 (null) 0
2 /system0 ext4 /dev/block/mmcblk0p2 (null) 0
3 /system1 ext4 /dev/block/mmcblk0p3 (null) 0
4 /cache ext4 /dev/block/mmcblk0p4 (null) 0
5 /misc emmc /dev/block/mmcblk0p5 (null) 0
6 /staging ext4 /dev/block/mmcblk0p6 (null) 0
7 /blflags ext4 /dev/block/mmcblk0p7 (null) 0
8 /datapp ext4 /dev/block/mmcblk0p8 (null) 0
9 /log ext4 /dev/block/mmcblk0p9 (null) 0
10 /data ext4 /dev/block/mmcblk0p10 (null) 0
11 /vsdcard vfat /dev/block/mmcblk0p11 (null) 0
12 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
13 /boot emmc boot (null) 0
14 /recovery emmc recovery (null) 0
15 /system ext4 system (null) 0
16 /vendor0 ext4 /datapp/vendor/vendor0.img (null) 0
17 /vendor1 ext4 /datapp/vendor/vendor1.img (null) 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116058
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 05:55:56 JST 2012
ro.build.date.utc=1353012956
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build8
ro.build.tags=test-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_002
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=nbx03
ro.build.description=SYS_002-user 4.0.3 TISU0143 121116058 test-keys
ro.build.fingerprint=Sony/SYS_002/nbx03:4.0.3/TISU0143/121116058:user/test-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
ro.factorytest=0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x00000008
ro.hardware=nbx03
ro.revision=0
init.svc.recovery=running
init.svc.nfx_daemon=running
init.svc.radbd=running
-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-0042.004.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
prev version[121116070] is larger than post version[111201022]
E:Prohibit update as a result of checking version or base sku
Installation aborted.
Click to expand...
Click to collapse
Ok so you might be stuck. That failed due to the incremental being bigger on the tablet than the update. Can you try the 0042.004 twice in a row. Hopefully your tablet is one that will switch partitions due to the first failing. (mine did that).
Stifilz
stifilz said:
Ok so you might be stuck. That failed due to the incremental being bigger on the tablet than the update. Can you try the 0042.004 twice in a row. Hopefully your tablet is one that will switch partitions due to the first failing. (mine did that).
Stifilz
Click to expand...
Click to collapse
Thanks for your Support, si i will have to send it Back to Sony for repair
Stop Using the Flasher its not working Correctly here
I have a mtk6582 set that I have been porting ROMS for. I found a few ROMS that meet the requirements of porting (Same soc, display etc) but bootloop when I flash them. I have found that all these ROMS have a framework2.jar file. All the ROMS that work on my device don't have that. How do I port these ROMS? Is there a way to merge the two framework.jars? Why don't these ROMS work on my device? Here is a logcat from one of these ROMS.
Starting recovery on Sat Apr 11 07:36:42 2015
Code:
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (540 x 960)
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
Carliv Touch Recovery v 2.2
MTK CWM-based v6.0.4.4
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/bootimg (null) 0
2 /misc emmc /dev/misc (null) 0
3 /recovery emmc /dev/recovery (null) 0
4 /system ext4 /[email protected] (null) 0
5 /cache ext4 /[email protected] (null) 0
6 /data ext4 /[email protected] (null) 0
7 /emmc vfat /[email protected] (null) 0
8 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
9 /sd-ext auto /dev/block/mmcblk1p2 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
Warning: No file_contexts
I:Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=mt6582
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=0
persist.mtk.aee.aed=on
ro.debuggable=1
persist.sys.usb.config=adb,mass_storage
persist.service.acm.enable=0
ro.mount.fs=EXT4
ro.build.id=JDQ39
ro.build.display.id=W128_1_XXX_V01.0_1_03
ro.build.version.incremental=eng.symphony.1389163176
ro.custom.build.version=1389163176
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed Jan 8 14:42:18 CST 2014
ro.build.date.utc=1389163338
ro.build.type=user
ro.build.user=symphony
ro.build.host=AndroidServer
ro.build.tags=test-keys
ro.product.model=Symphony W128
ro.product.brand=Symphony
ro.product.name=Symphony W128
ro.product.device=W128
ro.product.board=Symphony W128
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Symphony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
ro.build.product=Symphony W128
ro.build.description=Symphony_W128-user 4.2.2 JDQ39 eng.symphony.1389163176 test-keys
ro.build.fingerprint=Symphony/Symphony_W128/Symphony_W128:4.2.2/JDQ39/1389163176:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
ro.mediatek.version.release=W128_1_XXX_V01.0_1_03
ro.mediatek.platform=MT6582
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.JB5.MP
ro.mediatek.version.sdk=1
ro.internal.version.ver=KAAI228S_BGB_En_Bn_1.06.108
ro.operator.version.ver=XYZ_DEMO
ro.internal.version.date=2014-01-08 14:42:18
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
wifi.interface=wlan0
ro.mediatek.wlan.wsc=1
ro.mediatek.wlan.p2p=1
mediatek.wlan.ctia=0
wifi.tethering.interface=ap0
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
ro.sys.usb.mtp.whql.enable=0
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
ro.sys.usb.bicr=yes
ro.sys.usb.charging.only=yes
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
ro.operator.optr=CUST
persist.sys.timezone=Asia/Dhaka
persist.gemini.sim_num=2
ro.gemini.smart_sim_switch=false
ro.gemini.smart_3g_switch=1
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=1
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
persist.mtk.wcn.combo.chipid=-1
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
persist.mtk.anr.mechanism=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=_mt6620
ril.radiooff.poweroffMD=0
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
ro.config.ringtone2=Backroad.ogg
ter.service.enable=0
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.adups.fota.oem=konka82
ro.adups.fota.device=Symphony W128
ro.adups.fota.version=W128_1_XXX_V01.0_1_03-20140108-1442
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
I:Can't format unknown volume: /external_sd
What ROMs did you try? Are they source built or proprietary?
And what did you do to the ROMs in order to port them to your device/board?
It seems like init tries to access some path which isn't available on your device (though I'm no professional in porting).
Sent from my AOSPA One m8 using XDA Free mobile app
i guess you port it using copy and paste methods. hmm, it seems like it didn't flashed anything. maybe unpacking the boot.img from both ported and stock rom will help.
They aren't source built but ROMs from other devices with similar hardware. And what do I do with the boot images?