Please help me! I have downloaded a file that was cm something thinking it was an update and now I cannot get out of the twrp menu to boot my phone normally!... If anyone knows how to fix this whithout wipeing my phone please tell me
TWRP
See if the problem and restart the machine, press and hold the power button until it restarts.
---------- Post added at 09:08 PM ---------- Previous post was at 09:00 PM ----------
If the problem is not trying to go into the menu and do the dellaTWRP of the cache and wipping dalvik and try restarting.
Related
hi there.
i tried to load a jg rom on my razr and it got messy...(it starts and do reboot after few seconds)
now my battery is down and i cant charge my phone and try to fix it.
is there a way to charge it ?
amiteylon said:
hi there.
i tried to load a jg rom on my razr and it got messy...(it starts and do reboot after few seconds)
now my battery is down and i cant charge my phone and try to fix it.
is there a way to charge it ?
Click to expand...
Click to collapse
are you able to boot into your custom recovery
---------- Post added at 10:00 PM ---------- Previous post was at 09:57 PM ----------
Before that have u tried to switch off your phone n then charge?
---------- Post added at 10:44 PM ---------- Previous post was at 10:00 PM ----------
SAJdroid said:
are you able to boot into your custom recovery
---------- Post added at 10:00 PM ---------- Previous post was at 09:57 PM ----------
Before that have u tried to switch off your phone n then charge?
Click to expand...
Click to collapse
Some users have reported success on this method , hope it works for you
http://forum.xda-developers.com/showthread.php?t=1549625
it's not working
my battery is not charging - i did all was written in the post.
please help me.
all my life in that phone ...
amiteylon said:
my battery is not charging - i did all was written in the post.
please help me.
all my life in that phone ...
Click to expand...
Click to collapse
I would ask you to try that thread again with Matts Utility ( read the posts by some users of the same thread).. if your phone is able to detect USB in AP fastboot mode this should work
or else try this last time patiently :
This works with the wall charger
- shut off the phone (get into fastboot and just hit the power button to shutdown)
- while holding down the + and - volume buttons, plug in wall charger
- scroll down with the volume - button to BP tools and then push volume +
- the phone will show the Motorola logo and then show the battery image filling up as it charges
- wait awhile for it to charge up
or
I advice you take it to your service center
or
Finally if nothing worked ( at your own risk try this )
http://www.youtube.com/watch?v=QfT2Bejkcdk
Note :this method would void all possible warranty of your device
I just installed PowerJB for XGO, rebooted into cwm touch v5.5.0.4, and select flash from zip and i accidentally placed the zip file into internal sd.
The external sd has only one folder which has no files in it.Now i am stuck there as there is no go back option. Back button is not working as well!!
Please tell me what to do else I have to wait for battery to die.
Thank You!!!!!
Press the Power button one time This is how it works for my Sola
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
Oh and in CWM Touch is a 'back' button at the bottom
lol98lol98 said:
Press the Power button one time This is how it works for my Sola
I pressed the power button and it shows No files found btw this was how i entered into different options.
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
Oh and in CWM Touch is a 'back' button at the bottom
Click to expand...
Click to collapse
There is only one folder named LOST.DIR which has no files in it and there is nothing else (not even the back button):crying:
Amazingly, I was able to go back by touching the the corner above the menu button!!
Was it a way to do so or just a resolution problem??
I accessed Hidden Menu with 3845#*620#and clicked on Device Test.
Now my device rebooted and showed Mini OS 3.0
Every time I reboot it is stuck in this "OS". The are multiple options but all of them except All Auto Test - Partial have (+power) and i can't click them. What does that mean? There's also an option Normal Boot.
Please help!
cretu01 said:
I accessed Hidden Menu with 3845#*620#and clicked on Device Test.
Now my device rebooted and showed Mini OS 3.0
Every time I reboot it is stuck in this "OS". The are multiple options but all of them except All Auto Test - Partial have (+power) and i can't click them. What does that mean? There's also an option Normal Boot.
Please help!
Click to expand...
Click to collapse
Try the normal boot options, if it doesn't work use KDZ, it won't wipe anything.
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
newtonuy said:
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
Click to expand...
Click to collapse
i first thought to press the screen and then the power button. Thanks a lot!
.....................
I am sad that i did a factory reset and flashed kdz. Lost everything trying to find solutions! ;(
cretu01 said:
i first thought to press the screen and then the power button. Thanks a lot!
.....................
I am sad that i did a factory reset and flashed kdz. Lost everything trying to find solutions! ;(
Click to expand...
Click to collapse
DUDE, i SAID that you DON'T have to do a factory reset because KDZ would still work after....(Daca intelegi la ce ma refer :laugh: )
Rephosix said:
DUDE, i SAID that you DON'T have to do a factory reset because KDZ would still work after....(Daca intelegi la ce ma refer :laugh: )
Click to expand...
Click to collapse
ok DUDE. I just couldn't find how to press the Normal Boot option. (Daca intelegi ce spun :laugh. flash kdz didn't solve the issue.
thank you newtonuy
newtonuy said:
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
Click to expand...
Click to collapse
I love you. This worked thank you for your help
Thanks
:good: Thanks. Note for other users: you must press the power button before you click on Normal Boot.
newtonuy said:
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
Click to expand...
Click to collapse
newtonuy said:
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
Click to expand...
Click to collapse
Oh... veryvery thank you so much
newtonuy said:
Same problem here
---------- Post added at 03:57 PM ---------- Previous post was at 03:44 PM ----------
I have found the solution:
Hold the power button pressed and then choose the "Normal boot" option. :victory::victory:
Click to expand...
Click to collapse
thank you
Hello guys, Can you help me ? did something wrong... flashed stock rom and it keeps rebooting can't get into recovery to reset phone
Try holding the home, power, volume and volume down at the same time. It works like a rest i resorted to it myself not ling back. Once it starts up hold the usual home, power and volume up button to enter recovery. If you have a rom on sd card you can flash as usual. This is my first post on this forum by the way so if i was of any help to you couls you send some thanks my way please
---------- Post added at 06:19 PM ---------- Previous post was at 06:13 PM ----------
Sorry was so eager completley forgot about the stock rom part, the worst case scenario is using odin to flash stock firmware and recovery.
This is based on my Nougat kernel source for the J700P/J7008.
DOWNLOAD LINK
Instructions:
1. Reboot your device into download mode.
2. Attach to PC via USB.
3. Select AP tab, and find the recovery.tar.md5 file.
4. Start the flashing process.
5. After the reboot, hold the volUp+home+power keys to boot into TWRP.
This TWRP is completely stable, and should work fine for normal use (rooting, flashing modifications).
Again, there is a group for feedback you can find here: https://t.me/galaxyJ700P
Please join! It's important for me to hear feedback.
HELLO
this link in not available
---------- Post added at 02:01 AM ---------- Previous post was at 02:00 AM ----------
this link don't work
thanks
rhabhab said:
HELLO
this link in not available
---------- Post added at 02:01 AM ---------- Previous post was at 02:00 AM ----------
this link don't work
thanks
Click to expand...
Click to collapse
Fixed.
not working for me. i have j7008 and cant see what is on my screen
---------- Post added at 10:54 PM ---------- Previous post was at 10:49 PM ----------
it's okay. got solution, just put phone in sleep mode and unlock. there u can see well. thanks for your hard work
It is working....sort of...by the workaround method...
The recovery screen and full function will finally turn to normal display if you follow these interesting but strange steps below:
1. Do normal Recovery Mode button combination to boot into Recovery mode
2. Once your release all buttons, the screen will turn black and start showing horizontal messing lines, then turn into flashing blue messy graphical lines, like messed up tv signals, which is totally unreadable and unusable
3. DO NOT press any physical button, no power button, no volumeUp, or volumeDown, because you cannot determine which function you selected by pressing these buttons (you can not see them clearly!)
4. Do not do anything, just WAIT UNTIL screen turns black itself (screen saver, normally it preconfigured as 45-60 seconds, you can reconfigure it via Recovery Settings later on once you gain normal access into TWRP)
5. Now press POWER button to wakes up the phone
6. You will see the SWIPE UNLOCK which you can unlock the Recovery screen from sleep
7. There you have it, fully working TWRP UI
Not sure why this happens at first place, hope OP or someone can jump in and fix it. But nevertheless, this is the current way to use this recovery
Hope this helps!