Related
Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)
Ok so now that I've played with JB, I wanted to try out xperia ultimate hd for instance.
Problem is, I already had a lot upgrading from stock ICS to JB FXP.
So now the question: What are the steps to be sure there 's no problem at all while I change from
Flykernel+FXP
to
Xperia ultimate hd.
I unzipped the source, but can't find any ICS kernel to flash with flashtool. And I think I can not just reboot in recovery and flash the new rom, am I wrong ?
Searched for a clue on xda, sorry if I missed a post with the answer in it.
You should flash an ics kernel like rage kernel and flash the xperia ultimate HD rom in recovery. Don't forget about the wipes, it should work
What are the issues you are afraid of?
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
You should flash an ics kernel like rage kernel and flash the xperia ultimate HD rom in recovery. Don't forget about the wipes, it should work
What are the issues you are afraid of?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Gabrech said:
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Click to expand...
Click to collapse
If flykernel has built in cwm you will be able to
Sent from my Nexus 7 running Android 4.2.1
Gabrech said:
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Click to expand...
Click to collapse
flykernel for ics has recovery just use it. You will want to flash the kernel first and then use the CWM from flykernel ics to flash the rom. Since there was no kernel inside the ROM this probably means it uses the stock kernel.
Ok thanks ! reasons why I want to change is :
-> Google Search is leeching my battery, I tried everything from disabling location or history, still draining do not know why...
-> No OTA on FXP, you guys know if there is any chances there would be on CM10 unoff ? CM10 supposed to bring OTA, do not know if FXP will.
->Still my battery is fine with smartassV2 / Sio, but I miss the auto brightness and I wanted a more stable / Battery friendly rom. Is ultimate HD the right choice ?
3 questions in one thread...:silly:
So, I'm a pretty average custom rom user of an x10a.
I've flashed and tweaked out with several gingerbread roms, without any issues.
Recently I found about the newer 4.1.2 roms for the x10 from late December. And I was wondering, 'cause I want to update to one of those, I understand that they're flashed in the same way 2.3 roms are. But, my xRecovery is the 3.0 gingerbread ready version. So I don't know if it will work at all after I've installed one of the Jelly Bean roms.
So I'm kindly asking anybody who knows on the forum if it will still work after I flash to 4.1.2. 'Cause I'm not certain which rom of the two I found is better for me. And I want to test them both out, but of that of course I'd need xRecovery working.
In short I'm just asking for a y/n answer on will xRecovery for the Xperia x10 work after I've installed a 4.1 custom rom, or will I have to go back to stock 2.3.3 and re-root and unlock my bootloader again?
Big thanks to anybody who replies This is the first post I made here, and probably the only one I'll never need.
Nebri said:
So, I'm a pretty average custom rom user of an x10a.
I've flashed and tweaked out with several gingerbread roms, without any issues.
Recently I found about the newer 4.1.2 roms for the x10 from late December. And I was wondering, 'cause I want to update to one of those, I understand that they're flashed in the same way 2.3 roms are. But, my xRecovery is the 3.0 gingerbread ready version. So I don't know if it will work at all after I've installed one of the Jelly Bean roms.
So I'm kindly asking anybody who knows on the forum if it will still work after I flash to 4.1.2. 'Cause I'm not certain which rom of the two I found is better for me. And I want to test them both out, but of that of course I'd need xRecovery working.
In short I'm just asking for a y/n answer on will xRecovery for the Xperia x10 work after I've installed a 4.1 custom rom, or will I have to go back to stock 2.3.3 and re-root and unlock my bootloader again?
Big thanks to anybody who replies This is the first post I made here, and probably the only one I'll never need.
Click to expand...
Click to collapse
copy your choice of rom, ics/jb into your sd card. install the appropriate kernel via flashtool. all ics/jb kernels includes CWM so you should have no problem installing these roms granted that you have unlocked bootloader.
mrd7rs said:
copy your choice of rom, ics/jb into your sd card. install the appropriate kernel via flashtool. all ics/jb kernels includes CWM so you should have no problem installing these roms granted that you have unlocked bootloader.
Click to expand...
Click to collapse
Well, yeah, I know that, thanks ^^" but, I guess my post was too long for the question to be understandable. I was actually asking if xRecovery will still work fine After I've installed an ICS/JB rom. Surprised somebody replied so quickly o.o thanks.
Nebri said:
Well, yeah, I know that, thanks ^^" but, I guess my post was too long for the question to be understandable. I was actually asking if xRecovery will still work fine After I've installed an ICS/JB rom. Surprised somebody replied so quickly o.o thanks.
Click to expand...
Click to collapse
Oh, oh, sorry! WOW, I need to focus when reading! I'm really sorry! Thanks for the help good to know. :good:
It can be done, but it depends on which kernel you flash.
Some kernels only contain CWM, while others contain xRecovery and CWM.
But you can always flash a kernel that has xRecovery (Like Doomkernel of ferkernel 3.6), and thus you have xRecovery.
Ultimategeppie said:
It can be done, but it depends on which kernel you flash.
Some kernels only contain CWM, while others contain xRecovery and CWM.
But you can always flash a kernel that has xRecovery (Like Doomkernel of ferkernel 3.6), and thus you have xRecovery.
Click to expand...
Click to collapse
Thank you, glad to see that the community here is always willing to help!
Tried both of the roms today, and it worked like a charm! Neat that I didn't know each kernel came with custom recovery images.
Thank you for the help Cheers mate!
Ultimategeppie said:
It can be done, but it depends on which kernel you flash.
Some kernels only contain CWM, while others contain xRecovery and CWM.
But you can always flash a kernel that has xRecovery (Like Doomkernel of ferkernel 3.6), and thus you have xRecovery.
Click to expand...
Click to collapse
Hi
Can flash ICS/JB rom using xrecovery in Doomkernel? Thanks
I'm not sure mate, I don't think Doomlord's kernel is compatible with anything but 2.3, but don't take my word on it.
IDreadman said:
Hi
Can flash ICS/JB rom using xrecovery in Doomkernel? Thanks
Click to expand...
Click to collapse
What you must understand is that a Rom comes with some installation scripts. CWM and xRecovery will able or not to understand those scripts.
In order to be able to flash a ICS or JB rom from xRecovery it means that the rom has to been prepared to be flashed thanks to xRecovery.
The Recovery "manager" are provided with the kernels, so there shouldn't be anything to ask about xRecovery or CWM regarding Roms,
just flash the kernel that works with your rom and you'll get the correct recovery to install the ROM from.
The only exception is that on some phone, the CM10 kernel doesn't want to go into recovery before flashing CM10 Rom (happened to me when coming from stock gb), so you have to flash CM9 kernel, install CM10 rom and reflash CM10 kernel.
The question of xRecovery and CWM is more when you try to flash some libraries after the installation of the Rom.
So regarding this question, there's no ICS or JB roms (that I know of) that have a xRecovery scripts.
I recently picked up a GP 4.2. I immediately got it rooted so now I'm running a 2.3.6 stock rom with root. What's the next step in terms of getting a recovery installed and maybe moving up to an ICS or JB rom? I've kind of poked around a bit but it's some what confusing with all the other types of GPs in the same area. Does anybody have a recovery and rom they'd recommend? Is using rom manager to push CWM feasible?
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
NapalmDawn said:
Thank you for the info Meta. I'm somewhere around the mid-high mid level with flashing and rooting but slogging through trying to find the right info for a GP 4.2 was getting a bit hectic. I think part of it was the way some people abbreviate the model compared to others. I just wanted to make sure I didn't brick the device.
I got it mainly for a perm, in-car music and GPS/navigation provider instead of always looking to my phone to do it. One thing I noticed about the rom, it mentions installing it via CWM. If I don't have CWM yet, can this rom get pushed by odin or do I have to get CWM first and then flash the rom?
Click to expand...
Click to collapse
you should flash CWM via odin first and then flash the ROM via CWM
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
MetaMav said:
I would recommend the ChaOS ROM/Kernel which includes CWM. It is one of the few available ROMs for this device right now but offers a lot of great features. You can also install an S3 or Jelly Bean theme with the ChaOS ROM. Here's the link to the ROM: http://forum.xda-developers.com/showthread.php?t=2279806. I do not believe using ROM manager to push CWM is feasible on this device. Also, CM7 will most likely make it on to this device very soon. I would recommend watching for that in the near future. I know it can be a hassle trying to weed through the Galaxy Player forums to find 4.2 information but it's all we've got. Hope this helps and welcome to the SGP 4.2 community!
Click to expand...
Click to collapse
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
NapalmDawn said:
Would the instructions here be the right thing to do?
http://www.youtube.com/watch?v=-MbHDbjph8A
Click to expand...
Click to collapse
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
Xenphor said:
Do you know if CM will come to the 3.6 as well? And from what I understand, to get CWM on the 3.6 you have to flash a custom kernel?
Click to expand...
Click to collapse
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
MetaMav said:
Yes. Those instructions are correct. However, you do not need to run the adb dev tool like the person does in the beginning of video in order to boot into download mode. You can just hold the power, home, and down-volume button to boot the phone into download mode before using Odin. Zaclimon's CWM kernel can be found here (along with the wifi fix): http://forum.xda-developers.com/showthread.php?t=2198444 and installed with the instructions in the youtube video.
From what I have read I know that SerkTheTurk is currently compiling CM for the 4.2. I would imagine either him or some other 3.6 dev will take up the task of CM for your device. And, the answer to your second question is yes, you do have to flash a custom kernel similar to how the 4.2 requires a custom kernel.
Hope that helps.
Click to expand...
Click to collapse
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Xenphor said:
Ok thanks. I also have a question regarding flashing kernels. In the linux world (and other os world), randomly changing your kernel is a big no no that would lead to major compatibility issues. I don't understand how people can mix and match kernels, roms, firmware, bootloaders, recoveries and everything else? There won't be conflicts?
Regarding the kernel available for the 3.6: what do I do if I encounter stability issues with it and, say, the upcoming CM7? I wouldn't be able to go back to my original kernel because I didn't have CWM to back it up in the first place. Won't I be stuck with a potentially faulty kernel?
Click to expand...
Click to collapse
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
NapalmDawn said:
In changing kernels in the android world, you have mixed results. There are times a kernel can cause some issues but for the most part (we're talking like 98%), if an XDA dev posts a kernel and lets you know you can use it, you can trust it. These devs no matter the device spend painstaking hours ironing things out. Also, many of them have a select group of people testing the kernel for faults and issues. In a very active community, if a well known dev posts a kernel, you can trust it. HOWEVER...no matter what we think or believe or what we're told, every device is a unique and beautiful snowflake. Back up back up back up BACK UP BACK UP BACK UP your stuff. If you want to be super ULTRA safe, take the back up and download it to your PC or somewhere safe.
Click to expand...
Click to collapse
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
Just flash the cwm kernel because its basically the stock kernel but with cwm, and it shouldnt brick but if it does you can flash the stock kernel back again
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Where could I find a stock kernel?
Xenphor said:
Where could I find a stock kernel?
Click to expand...
Click to collapse
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
SerkTheTurk said:
US version: http://forum.xda-developers.com/showthread.php?t=1885374
International: http://forum.xda-developers.com/showthread.php?t=1884071
Sent from my YP-GI1 using Tapatalk 2
Click to expand...
Click to collapse
Ok thank you. However, will this work with YP-GS1?
But about kernels, on the webpage where I downloaded the stock rooted rom http://tau.shadowchild.nl/attn1/?p=166 it says specifically that the Wifi module in system and kernel must MATCH. This is what I'm talking about in regards to kernel compatibility with roms. How do I know if a kernel I'm downloading will have changes applied to it that will work with another rom like with this stock rom/kernel?
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Well I had to flash this kernel http://forum.xda-developers.com/showthread.php?t=2198234 to get CWM on mine. I haven't actually flashed anything with CWM because there doesn't seem to be any good roms for the 3.6 unless CM7 comes out sometime. I used Odin to flash a stock rom from here http://tau.shadowchild.nl/attn1/?p=166
NapalmDawn said:
Well in order-I used odin to flash CWM. Once it rebooted, I saw the Galaxy SII boot anim. Used Rom Manager to have it boot to CWM. From there I flashed wifi fix, the rom and then the mod pack. My build number is gingerbread-ueld3. From what I can tell, I think I'm all done. At first I was like hrmmmmm. Doesn't look much different. When I hit the toggle bar though, I could tell it had changed. The process was all very simple after I got headed in the right direction with CWM. That was my only confusing start point for this.
Edit-my bad. The rom didn't take on the first flash. I could tell by the build number. Reflashing the rom and the s3 addons. Hrmmm. Might be boot looping. It's going through the comet and coming up to the white samsung, vibrates a few times after a bit and goes back to the comet with no sound.
Click to expand...
Click to collapse
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
NapalmDawn said:
Poop. I think I bootloped the sucker. I can use Odin to reflash the stock, rooted rom just like I did when I got it first rooted right? Do we have another rom for the 4.2 I could try flashing? Not sure why it has bootlooped. I even went back into CWM, did a factory reset, flashed only the rom (no addons) and same thing. Possible bad download? It is flashing from the internal SD as my CWM is not seeing my external SD.
Click to expand...
Click to collapse
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
Xenphor said:
Well that's my dilemma because in order to backup my kernel I first need to flash the custom kernel to get CWM. What do I do?
Click to expand...
Click to collapse
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
MetaMav said:
I have been meaning to post this on the dev thread for awhile. I thought this problem might only be for certain people but I think it applies to US and maybe non-EU devices. I believe that the ChaOS ROM will bootloop on US (YP-GI1/XAA) devices if you do not install ChaOS's Enhanced Stock ROM (http://forum.xda-developers.com/showthread.php?t=2279450) for whatever reason. I spent days trying to install his ROM and bootlooping.
The way I successfully installed (if I remember correctly):
-Do a factory reset of rooted stock ROM
-Boot to CWM (meaning you have already flashed the custom kernel) and install ChaOS's Enhanced Stock (put all install files on internal SD)
-Boot to CWM, wipe davlick cache under "advanced", wipe cache partition, and install the ChaOS ROM
-Wait a little while and your device should boot up properly
I hope this works for you. If it doesn't let me know and I can help you further. If this does work for you too then I will post this on the ROM's thread for other users.
SerkTheTurk said it very well, you do not need to worry, but if you also want to do a backup before you install the custom kernel you could use the adb tools on the computer to backup the device. I'm sure you could learn how to do that with a quick Google search.
Click to expand...
Click to collapse
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Xenphor said:
ell there's not really much point in backing up the kernel when I've already downloaded it on my computer.
I've since flashed KingOS rom and don't really notice any differences at besides a few color changes... what's all the hype about?
Click to expand...
Click to collapse
Xen-it seems GPlayer development is still fairly newish. the work you see from devs now are all ground work. For the 4.2 and 3.6, they seem a little less dev populated than the 4 and 5. People will build upon the work of early devs and eventually get kernels that can OC and maybe ICS and JB roms. At this stage, we likely won't see anything like ZOMG earth shattering until people spend time with the devices. Seems Serk is on his way to doing the best he can for 4.2 but I am not sure who is tackling 3.6
It's weird how roms for devices go. I learned this when I had a tbolt and shockingly saw a FUNCTIONAL JB rom for my old Eris while the tbolt was still hanging back in ginger land with not even a really good ICS rom let alone JB. I asked the Tbolt community-why? How is it the dinosaur Eris has JB and not us? It all depends on what the devs can do with the sources provided. Sometimes certain hardware points are sticky. you can have beautiful JB rom for a device that can't talk to the camera if the hardware source isn't made available (reference the HP TP for many years)
For now, flash what you're comfortable with and and learn what you do and don't like. Also learn if you want to play things safe and not experiment or take on potentially beta builds. For the tbolt, tackling an ICS rom was too dicey so I never did. On my new Rezound, I eat up JB roms as they are in much better shape
Hi,
I wish to install a newer ROM than the one I currently have, yet it seems I might need a new kernel and CWM instead if TWRP.
So my questions are:
1. How do I know if I need a new kernel?
2. At some kernel threads, it is said that they only work with kitkat ROMs for example, and other ROMs might brick the phone with this kernel.
So do I flash a new kernel first or a new ROM first? Basically, how do I not brick my phone?
3. I read somewhere that SGS2 users can't install recovery without installing a new kernel. Is it true?
4. I would appreciate some directions about installing a new recovery (I would probably need CWM).
5. Why is it so hard to find answers to these probably many times asked questions?
Thanks.
peasmaker said:
Hi,
I wish to install a newer ROM than the one I currently have, yet it seems I might need a new kernel and CWM instead if TWRP.
So my questions are:
1. How do I know if I need a new kernel?
2. At some kernel threads, it is said that they only work with kitkat ROMs for example, and other ROMs might brick the phone with this kernel.
So do I flash a new kernel first or a new ROM first? Basically, how do I not brick my phone?
3. I read somewhere that SGS2 users can't install recovery without installing a new kernel. Is it true?
4. I would appreciate some directions about installing a new recovery (I would probably need CWM).
5. Why is it so hard to find answers to these probably many times asked questions?
Thanks.
Click to expand...
Click to collapse
1 - if you are happy with your current rom, dont flash a kernel if not sure what you are doing!
2 - kk and LP kernels are not compatible between them as your cpu doesn't fit in a incompatible motherboard ! newer kernels are safe from brickbug ! you wont brick your phone with a wrong kernel (kk kernel over LP rom), just a bootloop.
3 - because a kernel is a recovery and a recovery is a kernel.
4 - Slimsaber is a good rom to start see first and second post
5 - is not hard to find if you know were to look!
ultravy said:
3 - because a kernel is a recovery and a recovery is a kernel.
Click to expand...
Click to collapse
Just a small correction. A recovery (CWM or TWRP) can not be installed by itself because we don't have a recovery partition. Therefore kernel with a custom recovery needs to be installed.
ultravy said:
1 - if you are happy with your current rom, dont flash a kernel if not sure what you are doing!
2 - kk and LP kernels are not compatible between them as your cpu doesn't fit in a incompatible motherboard ! newer kernels are safe from brickbug ! you wont brick your phone with a wrong kernel (kk kernel over LP rom), just a bootloop.
3 - because a kernel is a recovery and a recovery is a kernel.
4 - Slimsaber is a good rom to start see first and second post
5 - is not hard to find if you know were to look!
Click to expand...
Click to collapse
1. I am happy with the current ROM, yet I want to flash the kernel to fix the annoying FPBug and to finally get LP ROM. And I might not know what am I doing, but if I won't try I will never know
I've flashed a new kernel and a new LP ROM, and I'm trying some others.
I still find it difficult to find a kernel that answers my needs since many kernels are hiding in specific posts and some kernel threads doesn't mention which recovery they install.
gsstudios said:
Just a small correction. A recovery (CWM or TWRP) can not be installed by itself because we don't have a recovery partition. Therefore kernel with a custom recovery needs to be installed.
Click to expand...
Click to collapse
I appreciate both help, I learned some new stuff thanks to you guys.