Several months ago, I followed the process many on these forums did of developer unlocking my Nokia Lumia 920 via the Canada Rogers ROM. For a while it was great, but I would like to now return it to the AT&T ROM, as all the updates I believe are caught up. Some of my apps, including some Nokia ones, seem to not play well with this developer ROM, and my WiFi is hit or miss at home now, possibly due to this ROM. Is there any way to un-developer unlock my phone?
dmontes said:
Several months ago, I followed the process many on these forums did of developer unlocking my Nokia Lumia 920 via the Canada Rogers ROM. For a while it was great, but I would like to now return it to the AT&T ROM, as all the updates I believe are caught up. Some of my apps, including some Nokia ones, seem to not play well with this developer ROM, and my WiFi is hit or miss at home now, possibly due to this ROM. Is there any way to un-developer unlock my phone?
Click to expand...
Click to collapse
What is you Hardware Product Code?
The Hardware Product Code is generally inscribed physically on/in the drawer of the SIM card or on/in one MicroSD card), 059.......
I wasn't able to find any numbers on my SIM tray, and my phone is a Nokia Lumia 920, so I do not have a Micro SD slot. Is there any other way to find this number? I was also unable to find it in the "About Phone" section under Settings.
dmontes said:
I wasn't able to find any numbers on my SIM tray, and my phone is a Nokia Lumia 920, so I do not have a Micro SD slot. Is there any other way to find this number? I was also unable to find it in the "About Phone" section under Settings.
Click to expand...
Click to collapse
Extra+info:
Value of Manufacturer Name?
RM-820_nam_canada_246
That is the ROM I put on there about a year ago in an attempt to update early. It was originally an AT&T Lumia 920.
dmontes said:
RM-820_nam_canada_246
That is the ROM I put on there about a year ago in an attempt to update early. It was originally an AT&T Lumia 920.
Click to expand...
Click to collapse
I was wrong, the value is that of the current rom, not the Hardware Product Code. But it does not matter.
Normally your Hardware Product Code is ATT U.S.
So just re-flash the present Hardware Product Code, with Nokia Software Recovery Tool ou Nokia Care Suite (Software Updater Module !).
Nokia Software Recovery Tool does not recognize my phone. If I connect my phone after opening the program, it says it was unable to connect with my phone. If I select that my phone is unresponsive, it asks that I reset the phone via VolDown and Power, and try again. This also does not work. Is the Other option, Nokia Care Suite, my only option? It seems intimidating, but I can try it.
dmontes said:
Nokia Software Recovery Tool does not recognize my phone. If I connect my phone after opening the program, it says it was unable to connect with my phone. If I select that my phone is unresponsive, it asks that I reset the phone via VolDown and Power, and try again. This also does not work. Is the Other option, Nokia Care Suite, my only option? It seems intimidating, but I can try it.
Click to expand...
Click to collapse
For Nokia Care Suite, you have two options:
- Either you do not fully follow the tutorial and you go directly to the Software Updater module.
- Either you fully follow the tutorial (in having taken the right Product Type and the right Product Code).
There isn't a way to do it, I've tried flashing pre and post portico ATT roms, but once you flash a Rogers RM-820_nam_canada_246 you're stuck with it.
I have not however, after moving to 8.1 tried any of the new roms, or know if they are available, but might be worth a try.
OK assuming Etaduck is right, and I have no way of returning to AT&T's ROM, what am I missing out on?
dmontes said:
OK assuming Etaduck is right, and I have no way of returning to AT&T's ROM, what am I missing out on?
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=53505164#post53505164
Related
Problem:
Updated my AT&T u8652 Fusion with a Huawei OEM firmware for a u8650 Sonic phone. The firmware upgrade did not finished all the way through step 2/2 but the phone boots up with the new firmware version identified via "About Phone". I did this without rooting the phone and have not back up.
With this firmware installed: I was able to root.
The problem is that this firmware was made for India - in the folder name is specified as this:
HUAWEI_U8650_Android_2.3_V100R001C151B863SP02_India_Trench
After the upgrade seems that all functions of the phone work, but the radio seems to be incorrect, I can no longer connect 3G, only EDGE, and the cell phone sensitivity is a lot lower than before the firmware upgrade.
==========================================================
I don't mind the u8650 firmware, but would like to get the radio portion to be correct for the US.
I have and identical Fusion that has been rooted with the stock AT&T firmware. I made a Clockworkmod/Rom Manager back up of this phone and installed the back up on the phone in question.
The functionality now looks like AT&T original, but the radio part is still messed up. With boot/system/data updated, the phone now has "no service".
==========================================================
I would like to put the broken phone back to the stock setup, but do not know how to utilize the identical phone to help enable this.
Or I would just like to update the radio portion for the broken phone.
Can anyone suggest some ideas to do this?
Thanks,
Rob
rob_fed said:
Problem:
Updated my AT&T u8652 Fusion with a Huawei OEM firmware for a u8650 Sonic phone. The firmware upgrade did not finished all the way through step 2/2 but the phone boots up with the new firmware version identified via "About Phone". I did this without rooting the phone and have not back up.
With this firmware installed: I was able to root.
The problem is that this firmware was made for India - in the folder name is specified as this:
HUAWEI_U8650_Android_2.3_V100R001C151B863SP02_India_Trench
After the upgrade seems that all functions of the phone work, but the radio seems to be incorrect, I can no longer connect 3G, only EDGE, and the cell phone sensitivity is a lot lower than before the firmware upgrade.
==========================================================
I don't mind the u8650 firmware, but would like to get the radio portion to be correct for the US.
I have and identical Fusion that has been rooted with the stock AT&T firmware. I made a Clockworkmod/Rom Manager back up of this phone and installed the back up on the phone in question.
The functionality now looks like AT&T original, but the radio part is still messed up. With boot/system/data updated, the phone now has "no service".
==========================================================
I would like to put the broken phone back to the stock setup, but do not know how to utilize the identical phone to help enable this.
Or I would just like to update the radio portion for the broken phone.
Can anyone suggest some ideas to do this?
Thanks,
Rob
Click to expand...
Click to collapse
I seem to be in the same situation as you, its an ATT phone, but when I put an ATT sim inside it asks for an unlock code! Did you ever figure out how to get the original radio back?
sactownsav said:
I seem to be in the same situation as you, its an ATT phone, but when I put an ATT sim inside it asks for an unlock code! Did you ever figure out how to get the original radio back?
Click to expand...
Click to collapse
Thanks for your reply. I could never fully overwrite the India firmware where I could get the 3g working. Since I was within 15 days of purchase at Walmart, I just returned the phone. I ended finding a perfect phone on Ebay for $65 and installed the "Zac" rom. No issues ever since.
rob_fed said:
Thanks for your reply. I could never fully overwrite the India firmware where I could get the 3g working. Since I was within 15 days of purchase at Walmart, I just returned the phone. I ended finding a perfect phone on Ebay for $65 and installed the "Zac" rom. No issues ever since.
Click to expand...
Click to collapse
Im actually considering a huawei sonic radio and see if that works, at this point im almost out of options
Thanks for the reply
Hi guyz,
I have a Nokia Lumia 800 with me of UK region and I dont mean just software wise. The actual phone was shipped from UK and the product code is 059J3G0
Now I reside in India and due to this region differences many of the features dont work especially USSD which is proving problematic since its difficult to even check my balance.
So is it possible to change my firmware to Indian version?
Thanks.
Possible very much, infact I have updated to the latest UK firmware, but will flash it back to the original White Lumia 800 firmware
mohib.sheth said:
Hi guyz,
I have a Nokia Lumia 800 with me of UK region and I dont mean just software wise. The actual phone was shipped from UK and the product code is 059J3G0
Now I reside in India and due to this region differences many of the features dont work especially USSD which is proving problematic since its difficult to even check my balance.
So is it possible to change my firmware to Indian version?
Thanks.
Click to expand...
Click to collapse
Yes you can
1) goto seidea[dot]com and start off by downloading the Nokia Care Suit and Data Package Manager.
2) After installation of both also install the WinUSB driver from C:\Program Files\Nokia\Nokia Care Suite\Drivers or C:\Program Files(x86)\Nokia\Nokia Care Suite\Drivers
3) Connect your phone with the Nokia Support Tool for Store open, this programme will have a launcher in the main Nokia Care Suite, and should have detected your phone, disconnect cable, this might restart your phone, this is normal.
4) Next fire up the Data Package Manager and search for RM-801 in product type, this will return a bunch of different variations of the firmware. In the cell below Name type India and download any of the firmwares you want, possibly to match the colour of your phone as well.
5) After download fire up the Nokia Support Tool for Store, change it to offline mode at bottom right, or simply disconnect from the Internet,from the file menu, select Open Product and select product RM-801
6) From the bottom left pane, select Programming and then Recovery and select the new firmware you just finished downloading.
7) Flashing should take 5-7 minutes and leave the phone un-attended. Voila
Again I take no responsibility for any dammage to your phone, and you may download and flash any firmware from the entire list under RM-801 should not be a problem.
Additionally you may also want to take a backup from WP7 Easy Backup, google it or search the forums for it.
regards
Prateek
mohib.sheth,
no problems at all, i´m from Brazil and i updated to test Tango one from Mexico and another from UK, both worked like a charm.
U can follow this thread if u have any issues, like dead phone, errors or different Product Code
RM-819 Firmware on RM-801 thanks to thesmartguyy
or simple follow the original one Tango:
New update !! Rm801_059q201_1750.0805.8773.12220_002 thanks to surya467
Thank you so much lohiaprateek and xpc21 for the steps.
Another query is If I do flash to India firmware, will I get update from regular Zune or I will need to keep flashing to the latest firmware manually?
Zune should prompt the update ideally..
mohib.sheth said:
Now I reside in India and due to this region differences many of the features dont work especially USSD which is proving problematic since its difficult to even check my balance.
Click to expand...
Click to collapse
USSD is not supported (fully) in Windows Phone so as far as that goes changing to an Indian FW will not make any difference.
paulheu said:
USSD is not supported (fully) in Windows Phone so as far as that goes changing to an Indian FW will not make any difference.
Click to expand...
Click to collapse
Thanks for the information. Silly me, should have researched that before asking the question
Thanks for saving me the hassle.
Thanks a lot for the thread and all the members...thanks a lottttttttttttttttttttttttttttt
Hey all,
So I've ran into a snag on my XT910 over the past few days.
Randomly, the device just dropped signal one evening and it never recovered it. Having troubleshooted with my network (O2 UK) and trying other SIM cards in the device, I have narrowed it down to the "Unknown baseband" or "No IMEI" symptoms found on these forums.. The device downright refuses to read (or even acknowledge the existance of) any SIM cards at all. It doesn't prompt for one to be inserted; it just says "No Service" where my network name should be, with an antenna and red "x" where the signal bars should be. Trying a working micro SIM from my girlfriends phone yields the same result. It doesn't even know it is in there.. In "About phone" it says Unknown baseband and dialing *#06# from my device gives a blank IMEI. Adding/viewing contacts on the SIM returns an error. I went so far as to get a brand new SIM from my network - still no dice.
The device is less than a month old and still under Moto warranty. However, the company I bought it from have neglected to provide a VAT receipt and I'm having trouble getting it off them. Moto have agreed to repair/replace the phone, but on the condition I have this receipt and send a copy of it to them. I really need this phone working, as it's the lifeline to my work, so I am willing to try reflashing/rooting the device ROM or radio as need be.
After some reading I have followed QPST guides to re-input the IMEI on my device, however it still exists and is correct. I have hard reset the phone, booted into recovery and wiped cache/data but no change.. I am considering the method of re-flashing the official OTA update for ICS, as I've read many users have this issue after upgrading, here: http://forum.xda-developers.com/showthread.php?t=1849744 - that is the correct ROM for my phone, but as I am already on that ROM I do not know whether flashing it on top will break things - ultimately brick it?
The device was (and still is) on 672.180.41.XT910.Retail.en.EU. I have not flashed any custom ROMs or rooted it. I have made no software or firmware changes to the device.
Please can someone help?! I do not mind getting my hands dirty and even voiding the Moto warranty if it fixes it (I would also be prepared to root it) but I am at a loss here - all pointers go to hardware fault and if that is indeed what it is, I would prefer somebody back up my assumption so I can send it to Moto knowing there was nothing I can do, rather than being a simple ROM flash away from having my device back..
Your phone may be damaged either physically (e.g. broken contacts SIM card slot) or software-wise (e.g. damaged PDS partition).
I'd go for a reflash, though - at least when properly executed it won't worsen your phone's condition. First, get full 672.180.41.XT910.Retail.en.EU flash file. Then, flash it using RSD Lite.
Vatazhka said:
Your phone may be damaged either physically (e.g. broken contacts SIM card slot) or software-wise (e.g. damaged PDS partition).
I'd go for a reflash, though - at least when properly executed it won't worsen your phone's condition. First, get full 672.180.41.XT910.Retail.en.EU flash file. Then, flash it using RSD Lite.
Click to expand...
Click to collapse
Thank you so much for this.
If it doesn't work by reflashing, can I still send it to Motorola under warranty for a hardware fix?
FrankPlummer said:
Thank you so much for this.
If it doesn't work by reflashing, can I still send it to Motorola under warranty for a hardware fix?
Click to expand...
Click to collapse
Hey,
I've just reflashed with RSD and I still get "Unknown baseband version" and no IMEI on the device. I guess it must be a hardware fault somewhere along the line.. Thank you regardless - and if you have any further suggestions then please do let me know.
try changing baseband. who knows...
china baseband is perfect for EU
heblu said:
try changing baseband. who knows...
china baseband is perfect for EU
Click to expand...
Click to collapse
How would I go about doing that?
I'd really like to know too...
Sent from my GT-N7100 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1863106
install baseband via custom recovery. they are flasheable zip
Firstly, thank you to all who replied to or considered my plea.
Secondly, after extensive research and some testing on my part I have found this is a seemingly irresolvable hardware (or very heavily damaged software) problem. Through various threads online I have read about people getting this mostly after they upgrade their Razr to ICS. It doesn't seem to be limited to one specific baseband/regional version of the device, as customers on Verizon in the States have had the same issue I have in the UK with a SIM-free phone.
I have sent the device off to Motorola for repair/replacement. I will report back when I get the device back.
FrankPlummer said:
Firstly, thank you to all who replied to or considered my plea.
Secondly, after extensive research and some testing on my part I have found this is a seemingly irresolvable hardware (or very heavily damaged software) problem. Through various threads online I have read about people getting this mostly after they upgrade their Razr to ICS. It doesn't seem to be limited to one specific baseband/regional version of the device, as customers on Verizon in the States have had the same issue I have in the UK with a SIM-free phone.
I have sent the device off to Motorola for repair/replacement. I will report back when I get the device back.
Click to expand...
Click to collapse
si I guess it never returned from tha one trip to the repair service?
...im hvinga similar problem with the xt890 (moto RAZR i)
updated to 4.4.2 kitkat, and it lost its anthena. like forever.
since then, spent nights surfing sesrching for a clue. nothing.
even unlocked the bootloader. it ended with the never endings WARNING BOOTLOADER UNLOCKED thing. sometimes i can bypase it buy antherna is still gone.
there are no replacementes for this device i think.
i want to use it so bad
Jorge_Amaya said:
si I guess it never returned from tha one trip to the repair service?
...im hvinga similar problem with the xt890 (moto RAZR i)
updated to 4.4.2 kitkat, and it lost its anthena. like forever.
since then, spent nights surfing sesrching for a clue. nothing.
even unlocked the bootloader. it ended with the never endings WARNING BOOTLOADER UNLOCKED thing. sometimes i can bypase it buy antherna is still gone.
there are no replacementes for this device i think.
i want to use it so bad
Click to expand...
Click to collapse
I have the same problem with xt890
Hello, everybody. First, I am posting in this subforum because my particular device doesn't have a subforum. Feel free to move this thread if it may belong to a more appropiate subforum.
I'm going to describe the device briefly, since I think it's not very known outside my country (Chile). The XT605 (Known internally as Motorola Jorian, and as Motorola Master by my network operator [Nextel Chile]) is a GSM/UMTS device, with PTT functionality (it has a dedicated button for it). It runs Gingerbread, and there are not even official ROMs for it (Motorola's webpage doesn't have it). It has QWERTY keyboard. It seems to be the GSM version of Motorola Admiral (which is CDMA, sold in United States by Sprint/Nextel, I think).
Now, my problem is that I can't use the phone without a SIM. I've tried editing build.prop, starting with camera button pressed, and trying to use "Boot Android (No BP)" (the option doesn't even exist in the Fastboot menu). It keeps stuck in "Emergency Calls only" "No SIM". The phone works well when using SIM.
Also, if I put another operator SIM, the phone asks to delete all private data before allowing me to use the phone. I don't know to which data exactly refers to, so I haven't proceeded with it.
Thank you in advance, and sorry if I made some grammar mistakes.
Nothing?
Bump. Same phone, same country, wondering how to root it. Glup.
I no longer use the XT605, but Motofail can be used to root it.
Shooting Star Max said:
It runs Gingerbread, and there are not even official ROMs for it (Motorola's webpage doesn't have it).
Click to expand...
Click to collapse
Hi Buddy,
Maybe it is a little bit late, but doing a quick research I found out this http://www.taringa.net/posts/celulares/16686324/Firmware-Motorola-Master-XT605.html
It is the official firmware for the Motorola XT605 Nextel Mexico, yet it might work with your carrier, it basically is the same.
This saved my phone from being a brick.
Now, my problem is that I can't use the phone without a SIM.
Click to expand...
Click to collapse
I dont't know why, this happens but this is not present with the firmware I'm using, try flashing this and see what happens
Jorghe1025 said:
Hi Buddy,
Maybe it is a little bit late, but doing a quick research I found out this http://www.taringa.net/posts/celulares/16686324/Firmware-Motorola-Master-XT605.html
It is the official firmware for the Motorola XT605 Nextel Mexico, yet it might work with your carrier, it basically is the same.
This saved my phone from being a brick.
I dont't know why, this happens but this is not present with the firmware I'm using, try flashing this and see what happens
Click to expand...
Click to collapse
Just for information for other users, the Nextel Mexico ROM works well with the Chilean version of the XT605. There is some bloatware, but it can be easily be removed with ES File Explorer or Titanium Backup (once you are root, though). Also, there are some OTAs available, that you can get before rooting (when rooting, you lose the ability to receive OTA updates).
hey guys i need the fastboot driver for this device i cant get rsd lite to recognize it
i really need it so if u can help somehow itll be pretty cool
Hello Folks,
I have done a research on this forum and I was unable to find an answer for my problem. I have a friend who owns an AT&T Lumia 920 who tried to flash it with a Rogers rom. He successfully was able to flash it into the rom RM-820_VAR_AMERICA_CA_ROGERSWIR_SL_BLACK-059Q6W4_1232.5951.1249.0001 which isn't available on NaviFirm Plus anymore. Now, the phone doesn't function and when you try to turn it on, it will not turn on. The only way to get the phone powering on is when you plug it into the wall charger. It will show the Rogers logo for a second and then it will be stuck at the Nokia logo with a red background. I tried to flash the phone with the latest AT&T roms that are available on NaviFirm but everytime I try to do so I get this message:
0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
Is there anyway I can force a rom into the phone? Or is there an AT&T rom that is not available on NaviFirm anymore but will still work on the phone? It's really frustrating to have to download a lot of GBs just to find out that the roms do not work. I would greatly appreciate your assistance.
WP8 said:
Hello Folks,
I have done a research on this forum and I was unable to find an answer for my problem. I have a friend who owns an AT&T Lumia 920 who tried to flash it with a Rogers rom. He successfully was able to flash it into the rom RM-820_VAR_AMERICA_CA_ROGERSWIR_SL_BLACK-059Q6W4_1232.5951.1249.0001 which isn't available on NaviFirm Plus anymore. Now, the phone doesn't function and when you try to turn it on, it will not turn on. The only way to get the phone powering on is when you plug it into the wall charger. It will show the Rogers logo for a second and then it will be stuck at the Nokia logo with a red background. I tried to flash the phone with the latest AT&T roms that are available on NaviFirm but everytime I try to do so I get this message:
0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
Is there anyway I can force a rom into the phone? Or is there an AT&T rom that is not available on NaviFirm anymore but will still work on the phone? It's really frustrating to have to download a lot of GBs just to find out that the roms do not work. I would greatly appreciate your assistance.
Click to expand...
Click to collapse
check this out
http://forum.xda-developers.com/showthread.php?t=2112674
doesn't look too goo for your friend.
You mean it does not look too good for his phone. You know the old I have friend always means I f'd my own phone up..