Related
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
I have the PDAir Aluminium one, and think it's great. I'm very rough with my electronic toys, since they are "tools" for me, and a good tool has to stand me Also bought some pretty leather case (don't remember the name), because I thought it would be a bit smaller than the PDAir, but it wasn't, and you don't see the screen with those, so I'm back to PDAir. Looking at all the scratches it already has, it seems it does it's job well...
Re: Opinions on this wizard case? Seems to fit great and pro
xboxhaxorz said:
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
Click to expand...
Click to collapse
Is it possible to extend the keyboard without removing the phone from the case?
:?:
Yup I got the solid aluminium for travel and running around and the Krussel Cabriolet is on order for evening out or light use.
Cy
I think Krussel is the best. The prices are another story, this is about 50$.
http://cgi.ebay.com/BLK-PIEL-FRAMA-...3QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
does the cabriolet from krusell protect the screen with some type of plastic over it? or does it just expose the screen?
this is the one im referring to
http://cgi.ebay.com/Krusell-Leather...QQihZ008QQcategoryZ108604QQrdZ1QQcmdZViewItem
That case doesn't protect the screen at all
Is it just me, or are the Monaco and PDAir cases identical (including the same pictures!)??
Monaco vs PDAir
More importantly, does anyone see a problem with one of these Case & Car charger combos on ebay?
has anyone ever got/seen one of these before?
http://cgi.ebay.co.uk/Black-Alumini...0QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
looks absolutly fantastic, and lets you use the keyboard too.
Cases
Hello there. I have the silver aluminum case. I really liked the case after I got use to it. The only problem, my phone would freeze. Lock up totally. Only way out was to hard reset the phone. I know this sounds rediculous, but I've ruled out everything else. Ever since I stopped using the case my phone hasn't needed even a soft reset.
Currently I am using this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230007898731
But I just heard about this on XDA's site:
http://cgi.ebay.com/Cingular-8125-V...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
In my ongoing effort to find the perfect case I just came across this one on eBay:
http://cgi.ebay.com/Cingular-HTC-81...QQihZ014QQcategoryZ146430QQrdZ1QQcmdZViewItem
Does anyone have any experience with it? My main point of concern is how does one get to the slideout keyboard?
Thanks
David
My guess is that you'd have to remove it from the case to use the keyboard. As far as I know, the only soft cases that allow you access to the keyboard are the PDAir and the Piel Frama (the one with a snap strap, not the other one).
That case is awful as well as the metal cases they have on ebay, I have them both and I dont like either one, still trying to find a case for my wizard that the keyboard can pop out of, I thought about modifying the metal case but the hinges on the door are on the side I would need to modify.
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Malik05 said:
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Click to expand...
Click to collapse
That's a nice case but find it wierd that they neglected to show pictures of this with the keyboard open. Anyone seen reviews of this case?
You have a review right here on this forum:
http://forum.xda-developers.com/showthread.php?t=291434
I bought that case, same as the author of the post. And I have the same problem. The back part of the case stays in place if you're careful, but when you slide the keyboard open it pops out. It's a pitty, it's a really nice looking case.
Not sure if it'd fit the Dopod 838 as good though...
hey guys and dolls, I am on a hunt to find the best case possible. I have a few very important features that must be met, they are:
Protection (obviously, lol)
must be sleek
not to bulky (don't wanna carry a brick in my pocket)
function (heard some cases cover the proximity sensor)
also would like the option of a kickstand (not gonna make or break a buy however).
I have read what several sites claim to be the "best on the market", however I find it really helps to get the input of actual users and not just the company selling the product (who obviously wants all the cash they can squeeze from you).
TIA
there is something called "bodyglove" it has a kickstand too i think. never tested it because its not available in european stores. so i never tested but it looked more than good to me in quality.
additional search for silicon cases - yes they really exist and you can still move your keyboard and its while keyboard is moved out still fully enclosured.
these silicon cases way better most time than these plastic (crystal) whatever cases out of ebay or such (i bought a lot).
the notches break after three times of removing the casecover (for pressing reset button). also its making nasty scratches on your chrome surface when a bit dirt is in between the phone and the case.
so pay for a good leather case (and thats not very handy most the time) or use a sleek silicon case (u never have to think about removing it out of a case for fully using your rhodium) it feels a lot better in hand and stays in place when you put it down on your desk in oyur car or whatever.
thanks buddy. I will for sure look into the silicon cases. my brother actually has the bodyglove for his Hero, but he does nothing but complain about it, lol.
sadly in the US we don't (or at least Sprint don't) get the beautiful Chrome back for the Rhodium. I have the "Millenium Falcon" battery cover. Though I would love to case mod my Rhodium to make it look sleek and slicker.
Thanks again for the words of advice.
Hi everyone,
I just bought my Transformer Prime last week, and I am faced with a major dilemma. I'm scared to death that I'm going to drop it, so I've been using the case I bought for my granddaughter's original Transformer. It doesn't quite fit, but it works.
I'm trying to decide how to protect my new tablet. I like the look of leather and a well-padded case would provide good protection, and the ones with stands are very utilitarian. However, it would be a shame to cover up such a beautiful device! (After all, its good looks are one of its strong selling points.)
Has someone found a good solution for protecting their tablet while still being able to show it off?
(I apologize if this question has already been answered; if so, please just point me to a link. Sometimes it's really hard to find the right search terms.)
Thanks!
I have ordered the case shown in link below. In my case I have the Dock also and this seems to me the Best available. Though this might not be what you need thought I would at least post it for you.
http://www.amazon.com/gp/product/B006ULQPTI
Sent from my Transformer Prime TF201 using Tapatalk
Since we have an Accessories Forum for the Transformer Prime that discusses accessories like cases, created for or compatible with the Transformer Prime, you might look there for answers first.
This thread in the Accessories forum would be a good place to start:
Ultimate Transformer PRIME TF201 Accessory Guide
Check out this one
This is the one I will be sporting once it is available... April 16...
http://www.gumdropcases.com/asus-prime.html
I've got a simple 10" laptop/tablet neoprene sleeve. The prime fits nicely inside it with or without the dock attached. Apart from that i dont have any protection on it right now and its been working well for me. Having it for 2 months now and i dont have any scratches. And i have it with me most of the times in my backpack or guitarcase.
MagicSpeller said:
Hi everyone,
I just bought my Transformer Prime last week, and I am faced with a major dilemma. I'm scared to death that I'm going to drop it, so I've been using the case I bought for my granddaughter's original Transformer. It doesn't quite fit, but it works.
I'm trying to decide how to protect my new tablet. I like the look of leather and a well-padded case would provide good protection, and the ones with stands are very utilitarian. However, it would be a shame to cover up such a beautiful device! (After all, its good looks are one of its strong selling points.)
Has someone found a good solution for protecting their tablet while still being able to show it off?
(I apologize if this question has already been answered; if so, please just point me to a link. Sometimes it's really hard to find the right search terms.)
Thanks!
Click to expand...
Click to collapse
Forgive me if someone already posted, but I bought a leather case from Best Buy made by a well known name..Targus.
It does offer great protection and has the stand built in, a nice velvet/cashmir type fabric inside. I don't have the link but it's the only one that the Best Buy by me had so I grabbed it. It was $40.00
This ISN'T my Transformer Prime
Yeah there are a lot to choose from on Amazon.com. This is the one I went with, I'm happy overall:
http://www.amazon.com/gp/product/B0063Q3G3I/ref=oh_o00_s00_i00_details
Thanks!
Thank you, RonH54. That looks like a very nice case. The problem is that although the front of the keyboard is visible, the back of the keyboard and pretty much everything on the tablet itself is pretty much covered--so no one can see how nice it looks. (My dilemma....)
I'm also a little concerned about the very negative review I saw there!
joedeveloper, the Moko also looks very nice, but also has the same issues. And Pixelation, I haven't seen the Targus case, but I assume it covers the tablet as well. Am I right? And finally, Gage_Hero...!!!! What can I say? That looks like a pretty extreme solution. I don't plan to treat my tablet in a way that I would need anything like that.
almightywhacko, thank you for the link. I had already seen it, and looked at most of the cases there, but got discouraged because they all looked pretty much the same and all covered the tablet so you couldn't see it. I tried to post my question in the Accessories Forum first, but was told that I was breaking forum rules by posting a question there and that I needed to post in the Q&A forum--so here I am.
I've never seriously considered a sleeve, but clouds5, thanks for the suggestion. There are several listed in the Accessories Forum thread, so I intend to look at them. That might be the best compromise, because the tablet would be protected when it most needed it, but would be on display when I was actually using it.
The only other option that has occurred to me is a clear case. Something like the Invisible Shield wouldn't provide enough impact protection (although I would need something like that for the screen to prevent scratches)--but there might be a clear case out there that is more protective. Has anyone seen something like that?
Again, thanks to everyone for your contributions. You have given me some new ideas. (Sorry to be so slow--I've tried several times to post over the past couple of days, but kept being told that "the token had expired", whatever that means!)
I have 6 cases. I am not kidding. 6.
Like you, I have a tf101 sleeve that works for basic thin protection (given to me by a friend that didn't like it for their og). I have a neoprene case (another give-me). I have a non-tf202 specific hard-ish case made by CaseLogic that I like a lot because it will hold the tablet+dock and it is very durable. I have the MiniSuit linked to above for the tablet+dock and it sucks. Badly. They are a good company and they have done right by me, refunded my money, etc, but the design is horrible with a very basic flaw - the leather is way too thick where the dock meets tablet and that is just not going to be good over time. I have "modified" it with a pair of scissors so that it wont break my tablet+dock - it does make a nice case for carrying and using them both. I also have the MiniSuit 360 case. I really like that one because the tablet is detachable from the case.
IMO = The best one is the one joedeveloper linked to. Slim, good protection and really shows off the Prime. It is the only one that does not cover the bezel. It is very "configurable" and you can use the dock WITH it. I can be folded half way back and then half of the beautiful back is "shown".
I have the full body skinomi skin for my tablet and dock so I have that as added protection so I son't mind using my dock with that case because I know my dock wont get scratched. But i wont use that if I need to carry or travel with the dock, I'd use one of the other ones.
So...slugbug2010,
Let me make sure I understand you. You like the MoKo case "best" because it doesn't cover the bezel, but it doesn't give enough protection to travel with it? So you would recommend buying a second case for traveling with it (in addition to a full-body skin)?
I can't tell from looking at it and reading about it on Amazon if it covers the keyboard, or just the tablet itself. If it covers both, can the two pieces be separated? If it doesn't cover the keyboard, I'd need to have a separate sleeve or something to protect it.
Can you and joedeveloper elaborate a little more, please?
Thanks!
You can get some balls for your Eee pad if you are afraid of dropping it.
http://iballz.info/universal.html
Reading your post again, it looks like you want a clear TPU case like this one made for the iPad http://www.amazon.com/CrazyOnDigital-Accessories-Cover-Retail-Package/dp/B004RRU7NM
However sadly no company has yet stepped up to the task of making such a case. Theoretically a TPU case would provide decent drop protection and not alter the look of the tablet much. And since it is so thin it would work well with a sleeve for added padding when not in use.
Yes, the TPU case looks like it might be along the lines of what i want--but it appears that I'm out of luck.
texstar, the iBalls are a really interesting concept (despite the name). I'm thinking they might be the perfect thing for my granddaughter's Transformer, providing some protection and leaving the tablet easier to use than the traditional case I already have for her.
As far as using them with my Prime--they certainly would expose the tablet itself, but I'm not sure I like the "quirky" look mentioned by some of the reviewers. It's also not clear whether or not they might cover up some of the ports and controls.
If your post was a serious one, do you own them? Has anyone tried them on your tablets?
Joedeveloper and Slugbug2010, are you still there? I really like the Moko case, but it's tablet only. The Minisuit looks nice, too, but seems to be thicker than what I'm looking for. I think I need a combination of the two....
Those of you who are using the Moko and have a dock, do you have a separate case for it, use a sleeve, or just leave it unprotected?
Thanks again for all your help.
Sent from my Transformer Prime TF201 using xda premium
Hello all
Am sure this is probably one of the number one questions, so sorry to post it one more time, but am looking for a case for my 8.4 an was looking for some suggestions.
Want something that obviously covers the screen, but can fold back 100% so I can lay it flat on the desk.
But would really want for it to fold as a stand too.
Hopefully can be tough as I work in some harsh environments, as well an in part due to this too, don't need it to fancy, an might think leather would be out, but would be easy to clean an not absorbent such as a cloth like material.
Oh, an am not looking for a key board, as well am hoping to keep the price down.
So as can be seen, is kinda why I posted as while I find some of the above, I don't find all of it, but I get too that I have to get what's out there, but just hoping I might benefit from others who have come before me to find as close to what all my needs are.
Thanks for any help.
Check local Bestbuy for Insignia folio case.
http://www.bestbuy.com/site/insigni...lack/9481112.p?id=1219424187668&skuId=9481112
did you look on amazon? there is a lot of case here...