Related
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
I have the same problem.
Have you found a solution?
zongamin said:
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
Click to expand...
Click to collapse
Hey!
Dose you RESET FACTORY SETTINGS and FORMAT CACHE in recovery, before flashing with ODIN?
CHEERS!
Did the light lit when you entered the download mode? That's the indicator.
I got the same proble, tried several firmwares with odin but, when the phone reboots it starts flashing again
Hey!
You all, try THIS one.
CHEERS!
casiocas said:
Hey!
You all, try THIS one.
CHEERS!
Click to expand...
Click to collapse
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
moe_szislack said:
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
Click to expand...
Click to collapse
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
casiocas said:
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
Click to expand...
Click to collapse
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
moe_szislack said:
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
Click to expand...
Click to collapse
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
casiocas said:
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
Click to expand...
Click to collapse
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
moe_szislack said:
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
Click to expand...
Click to collapse
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
casiocas said:
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
Click to expand...
Click to collapse
Ok, Thank you
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
misterio_mr111 said:
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The same thing happens to me, Anybody has any idea?
Just send it to the service center.
No other recovery method is know.
I have been in every forum arond for this kinda brick and there is no solution for YOU to do. Also there is absolutely no way for Samsung to see either say that after the first boot the battery went dead and it never started again. It will be covered by your warranty and brand new ace! Now dont go making stupid mistakes again hope i helped
Sent from my GT-S5830 using XDA App
Apk/sim bricked my phone.
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
BLZBud said:
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
Click to expand...
Click to collapse
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
moe_szislack said:
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
Click to expand...
Click to collapse
Even Samsung don't have an easy way to repair it, hence they replace the mainboard to fix the issue.
hey guys
I have been using Siyah Kernel on my SGS2 for a wile now so I decided to put it on my brothers 1 day old SGS3 and when I try to flash it in CWR I got an errror saying zip could not be flashed and when I rebooted the phone all I got was a Black screen. I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Any one have any ideas before I go back to the store and play dumb ?
Use Odin and reflash your kernel of choice.
Sent from my GT-I9300 using xda app-developers app
goul0080 said:
hey guys.....
Click to expand...
Click to collapse
Do you download from here: http://www.gokhanmoral.com/
For help: try reboot "bootloader"
http://forum.xda-developers.com/showthread.php?t=1684535
Thanks...?
x111 said:
Do you download from here: http://www.gokhanmoral.com/
For help: try reboot "bootloader"
http://forum.xda-developers.com/showthread.php?t=1684535
Click to expand...
Click to collapse
ApophisXP said:
Use Odin and reflash your kernel of choice.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
goul0080 said:
I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Click to expand...
Click to collapse
Thanks for the help, but as I said. I only get a black screen I cant get in to download mode or CWR.
If you can't go into download mode you won't be able to repair anything...
If you have an USB jig, it should work on S3 to go to download mode
I figured...
9lum9u66ing said:
If you can't go into download mode you won't be able to repair anything...
Click to expand...
Click to collapse
Kinda sucks
My brother came home with the phone yesterday. I put CWR on it then rooted it and all was fine. I figure I could throw the siyah kernel on it and install a second rom for him to try out.... I have been doing this stuff on my SGS1 and SGS2 for years and never had this problem. But I guess that's it. I ordered a jig on ebay just in case they wont take the phone back at the store. I guess a mod can close this thread if there is nothing else to try.
Thanks for everyone's time....
Strange, the kernel and download mode are at completly different places.
Breaking the kernel, fine. But breaking downlad mode access?
It worked for others already, so please try:
- power off the phone
- remove usb-cable if attached
- pull battery for 30seconds
-press and hold vol-down and Home button. (the latter in the centre)
- press power until the logo appears
Does it still not go to download mode?
USB jigs are pretty easy to build yourself if you have ever used a soldering iron. So if you're like me, you won't wait for the ebay-seller to deliver =)
Sent from my GT-I9300 using xda premium
I Have tried everything possible with the 3 button combo and cant get in to download mode. Pull battery for up to 5 minutes, USB in, USB out, everything I can think of. I cant even get to the LOGO. The red light might come on for a few seconds but nothing at all on the screen.
And all I did was:
Flash the CWR in download mode with odin, reboot(everything worked fine)
Flash su-root zip in CWR, rebooted(everything worked fine)
Made a Backup in CWR, rebooted(everything worked fine)
Flash SiyahKernel S3 zip in CWR, then got an error saying zip was not installed, rebooted and could not get boot logo, download or CWR
ask karnel maker just see weather he can help u out. as might be he knwing case of this ..
Sent from my GT-I9300 using xda premium
Go to eBay and get yourself a USB jig. very cheap and will put your phone into download mode.
Sent from my GT-I9300 using xda app-developers app
It might be a stupid question but is there any charge in the battery?
Sent from my GT-I9300 using Tapatalk 2
On the way
ApophisXP said:
Go to eBay and get yourself a USB jig. very cheap and will put your phone into download mode.
Click to expand...
Click to collapse
I had one on the way 2 minutes after Couldn't get in download mode.
corrsea said:
It might be a stupid question but is there any charge in the battery?
Click to expand...
Click to collapse
I have a dock charger for extra batteries and it shows full charge on the dock.
This same thing just happened to me.
I dont have internet at my house i only always use my phone. I read about the siyah kernal and decided to flash it this morning hoping that i could get hotspot to work. I did it through CW and now the screen just stays black. I got the same warning msg with a andy on his back and a red triangle. It was fine before and working normally. I had a stock firmware and the only thing that i changed about the phone was rooting it through odin. Now i'm screwed because i never had this issued with any phone and i'm tempted to take it back to best buy and blame them. I had soft bricked it about 4 days ago but i was able to fix it in a few mins after searching xda. When the phone is plugged in to the computer it does make a connection sound but the device name is not my phone. Someone point me in the right direction
ajd2416 said:
I dont have internet at my house i only always use my phone. I read about the siyah kernal and decided to flash it this morning hoping that i could get hotspot to work. I did it through CW and now the screen just stays black. I got the same warning msg with a andy on his back and a red triangle. It was fine before and working normally. I had a stock firmware and the only thing that i changed about the phone was rooting it through odin. Now i'm screwed because i never had this issued with any phone and i'm tempted to take it back to best buy and blame them. I had soft bricked it about 4 days ago but i was able to fix it in a few mins after searching xda. When the phone is plugged in to the computer it does make a connection sound but the device name is not my phone. Someone point me in the right direction
Click to expand...
Click to collapse
as above. Jig to download mode. Then flash your kernel of choice via Odin.
Sent from my GT-I9300 using xda app-developers app
Maybe this will work out???
This is the one I'm looking at on amazon
http://www.amazon.com/Aftermarket-D...cement/dp/B005UUCT0Y/ref=cm_cr_pr_product_top
I'm not new to flashing and root but i am new to samsung devices. I dont know what would be a good kernel nor how to use a usb jig.
I dont know what would be a good kernel
Click to expand...
Click to collapse
That would actually be Siyah. But you don't seem to like it anymore after having it brick your phone *g*
nor how to use a usb jig.
Click to expand...
Click to collapse
Pull the battery for 30 seconds, plug it back in. Then plug in to USB jig and within 5 seconds your phone has automatically turned on an gone to Download mode.
NOTE: Some suppliers sell ****ty Jigs with a too high tolerance value of the resistance. These DO NOT work on the S3 even if they worked on the S1/S2.
I had one on the way 2 minutes after Couldn't get in download mode.
Click to expand...
Click to collapse
@goul0080: Please if possible measure the resistance between pin3 and pin5 of the Jig. It should be 301kOhm +- 1% tolerance. Anything between 1 and 5% may n or may not work.
If the phone still doesn't work you should check for a repair shop around you. They can use JTAG (direct access to the flash storage and other system compontents) to flash the ROM and you should be good to go again. Usually costs around 20$ afaik.
ajd2416 said:
This is the one I'm looking at on amazon
http://www.amazon.com/Aftermarket-D...cement/dp/B005UUCT0Y/ref=cm_cr_pr_product_top
I'm not new to flashing and root but i am new to samsung devices. I dont know what would be a good kernel nor how to use a usb jig.
Click to expand...
Click to collapse
looks like mine didn't read it fully but yeah. Basically pull battery to make sure phone is off. Give it a few secs then stick battery back in. Then stick in the jig. Phone autoboots into download mode.
Sent from my GT-I9300 using xda app-developers app
goul0080 said:
hey guys
I have been using Siyah Kernel on my SGS2 for a wile now so I decided to put it on my brothers 1 day old SGS3 and when I try to flash it in CWR I got an errror saying zip could not be flashed and when I rebooted the phone all I got was a Black screen. I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Any one have any ideas before I go back to the store and play dumb ?
Click to expand...
Click to collapse
Did u use the same Siyah Kernel SGS2 on SGS3 or u downloaded SGS3 Siyah Kernel
When I get the jig
iraqi4ever80 said:
Did u use the same Siyah Kernel SGS2 on SGS3 or u downloaded SGS3 Siyah Kernel
Click to expand...
Click to collapse
Read the subject of the post...
"Brick SGS3 SiyahKernel S3 (stable v1.2.6) help ?"
d4fseeker said:
@goul0080: Please if possible measure the resistance between pin3 and pin5 of the Jig. It should be 301kOhm +- 1% tolerance. Anything between 1 and 5% may n or may not work.
If the phone still doesn't work you should check for a repair shop around you. They can use JTAG (direct access to the flash storage and other system compontents) to flash the ROM and you should be good to go again. Usually costs around 20$ afaik.
Click to expand...
Click to collapse
I don't have anything to measure the Ohm, sorry. Also the closest Phone repair shop is about 9 hours drive, no joke. I am on a island in Canada and I have to drive about an our just to get to a small crappy walmart haha.
I have what I think is an unusual booting splash screen. It is the first thing to show up after turning on.
I also booted in to the Odin menu just to see the status and took a picture of that.
I just got my phone today and have done nothing other than install normal applications, I haven't tried to root or flash anything.
I watched a video of some other verizon SGS3 owner turning on their device and that unlocked lock icon and custom do not appear.
Anyone know what this means?
What I believe is normal boot up image (5:13)
http://youtu.be/VaVyWfS69J0
You will probably get a better response if you post this in Q&A. I don't know the answer to your question though. I am curious what they answer is.
it comes up once you've flashed something using odin
if you'll notice on the third image, next to "SYSTEM STATUS:" it says "Custom" this means something other than something official has been flashed to it
i'd really like to know how you did this
me too
Like I said, I haven't done anything. I have actually not even plugged it into my computer yet via usb cable.
Maybe it came rooted
Sent from my Ally using XDA
Its not rooted
I suspected that and tried to just download superSU and it doesn't work, says phone isn't rooted.
Assuming you bought yours brand new from the store, I'd go back. But first I'd try removing the microsd card and booting up. Then try the SIM card, then boot up again. If its still the same, something is up with your device. It keeps booting up into download mode. :S
I don't think he was saying it boots into DL mode on its own, just that he went into DL mode to confirm he's not running anything custom, which it appears he is not.
Strange that it would show the custom boot image when you're running the official ROM. I don't know that that's a bad thing, or that it's worth returning the phone. Might be worth calling Verizon and talking to them about it. At the least you then have a record that your phone was doing that from the beginning, so if you have to return it later on after installing custom ROMs, you can say it was always like that
silasrye said:
I have what I think is an unusual booting splash screen. It is the first thing to show up after turning on.
I also booted in to the Odin menu just to see the status and took a picture of that.
I just got my phone today and have done nothing other than install normal applications, I haven't tried to root or flash anything.
I watched a video of some other verizon SGS3 owner turning on their device and that unlocked lock icon and custom do not appear.
Anyone know what this means?
What I believe is normal boot up image (5:13)
http://youtu.be/VaVyWfS69J0
Click to expand...
Click to collapse
We need a dump. It might help with Root.
Sent from my Galaxy Nexus using xda app-developers app
cue_32 said:
Assuming you bought yours brand new from the store, I'd go back. But first I'd try removing the microsd card and booting up. Then try the SIM card, then boot up again. If its still the same, something is up with your device. It keeps booting up into download mode. :S
Click to expand...
Click to collapse
you aren't from around here are ya'? :silly:
IN8skillz said:
We need a dump. It might help with Root.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
this +1
jamesnmandy said:
you aren't from around here are ya'? :silly
Click to expand...
Click to collapse
James is right; whatever you do, DO NOT return your device to the store. You might have the golden ticket in your palms.
silasrye said:
I have what I think is an unusual booting splash screen. It is the first thing to show up after turning on.
I also booted in to the Odin menu just to see the status and took a picture of that.
I just got my phone today and have done nothing other than install normal applications, I haven't tried to root or flash anything.
I watched a video of some other verizon SGS3 owner turning on their device and that unlocked lock icon and custom do not appear.
Anyone know what this means?
What I believe is normal boot up image (5:13)
http://youtu.be/VaVyWfS69J0
Click to expand...
Click to collapse
Do you have access to a computer? Are you familiar with ADB?
Sent from my Galaxy Nexus using xda app-developers app
Odin Dump
I've hooked up to Odin 3.07.
The options for dumping are grayed out. I don't know if that's normal or if Odin is even how I should dump.
Of note, My ODIN MODE screen the top left corner of the phone.
(in my linked post i have image) (Purple text is actually written in white)
ODIN MODE
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
Yes, I am familiar with ADB... "familiar but not too familiar, but not too not familiar"
cue_32 said:
Assuming you bought yours brand new from the store, I'd go back. But first I'd try removing the microsd card and booting up. Then try the SIM card, then boot up again. If its still the same, something is up with your device. It keeps booting up into download mode. :S
Click to expand...
Click to collapse
Ahahahahahahaha... you funny man
ummmmmmmmmmm WTF!!!!!! VZW bootloader is locked meaning you SHOULDN'T be able to have custom system binaries
DON'T SELL YOUR PHONE YOU COULD SAVE ALL VZW sIII!!!!!
silasrye said:
I have what I think is an unusual booting splash screen. It is the first thing to show up after turning on.
I also booted in to the Odin menu just to see the status and took a picture of that.
I just got my phone today and have done nothing other than install normal applications, I haven't tried to root or flash anything.
I watched a video of some other verizon SGS3 owner turning on their device and that unlocked lock icon and custom do not appear.
Anyone know what this means?
What I believe is normal boot up image (5:13)
http://youtu.be/VaVyWfS69J0
Click to expand...
Click to collapse
Please please don't return to VZW. See if a dev can help you to get dump. You could be holding the key to save tens of thousands of us.
This is very interesting. Subscribing to thread!
Although yours isn't rooted and perhaps not unlocked, the devs can check out what's different in your device through a dump and it could assist them in achieving root and unlocking the bootloader. I don't really know a whole lot about developing, so maybe that's not possible
Sent from my Ally using XDA
NightxFall said:
Although yours isn't rooted and perhaps not unlocked, the devs can check out what's different in your device through a dump and it could assist them in achieving root and unlocking the bootloader. I don't really know a whole lot about developing, so maybe that's not possible
Sent from my Ally using XDA
Click to expand...
Click to collapse
it is! it has been done before (different phone of course)
This may be the key to having an awesome phone on Verizon. Whatever you do don't return it.
Sent from my EVO using xda app-developers app
Agh!
I recently rooted my SGH-I777, flashed it using Clockword Mod Recovery, and then rebooted into recovery using CWM. But instead of rebooting into the recovery menu, everything went black. Now my phone won't reboot into recovery mode at all (not even with the Volume Up + Volume Down + Power combo). Instead, it gives me the Galaxy S2 GT-I9100 startup screen with the yellow triangle and then the screen goes all black, with quick flashes of dark gray.
When I removed the battery (to get it out of the black screen loop), returned the battery to the device, and plugged it in (without powering up the phone), the "charging" screen with the charging battery indicator flashed on the screen for a moment, and then back to all black flashes.
I removed the battery, SD card, and SIM card for about 20 minutes because I've read that can sometimes help. No dice.
I'm running ICS 4.0.3 with a Siyah 3.4.2 kernel.
This is probably either really bad or no big deal and I'm lame for not figuring it out, but... HELP! (Please? :fingers-crossed: ) I know this has been asked, but the other threads I've found have been able to get to recovery mode, whereas I can't seem to get to that point.
If you need any other info, let me know!
olllive said:
Agh!
I recently rooted my SGH-I777, flashed it using Clockword Mod Recovery, and then rebooted into recovery using CWM. But instead of rebooting into the recovery menu, everything went black. Now my phone won't reboot into recovery mode at all (not even with the Volume Up + Volume Down + Power combo). Instead, it gives me the Galaxy S2 GT-I9100 startup screen with the yellow triangle and then the screen goes all black, with quick flashes of dark gray.
When I removed the battery (to get it out of the black screen loop), returned the battery to the device, and plugged it in (without powering up the phone), the "charging" screen with the charging battery indicator flashed on the screen for a moment, and then back to all black flashes.
I removed the battery, SD card, and SIM card for about 20 minutes because I've read that can sometimes help. No dice.
I'm running ICS 4.0.3 with a Siyah 3.4.2 kernel.
This is probably either really bad or no big deal and I'm lame for not figuring it out, but... HELP! (Please? :fingers-crossed: ) I know this has been asked, but the other threads I've found have been able to get to recovery mode, whereas I can't seem to get to that point.
If you need any other info, let me know!
Click to expand...
Click to collapse
download mode and flash another kernel, or the same one.
sounds like broken recovery.
MotoMudder77 said:
download mode and flash another kernel, or the same one.
sounds like broken recovery.
Click to expand...
Click to collapse
The phone is not even entertaining the idea of giving me a menu of any sort at this point. Just all black screens. Super frustrating.
olllive said:
The phone is not even entertaining the idea of giving me a menu of any sort at this point. Just all black screens. Super frustrating.
Click to expand...
Click to collapse
No d/l mode, no CWM. = brick.
no offense but im pretty sure your just not holding the buttons right.
CWM= hold both vol, then hold power, let the first screen blink once, come back, then let off power is my trick.
download, you can just hold vol buttons and insert USB belive.
Somebody used rom manager!
Sent from my Galaxy Nexus using Tapatalk 2
MotoMudder77 said:
No d/l mode, no CWM. = brick.
no offense but im pretty sure your just not holding the buttons right.
CWM= hold both vol, then hold power, let the first screen blink once, come back, then let off power is my trick.
download, you can just hold vol buttons and insert USB belive.
Click to expand...
Click to collapse
A-ha! Ok, so definitely no on the CWM combo, but I do get a menu using DL mode. Thank you. Seeing at least a menu made me feel much better.
I re-flashed the initial kernel, but no change. Still stuck in perpetual black screen boot loop.
I'm not opposed to doing a full-fledged wipe using Odin, if that's an option, but I've never looked into it before, and I'm currently feeling pretty gun shy when it comes to getting creative with any new tricks.
Pirateghost said:
Somebody used rom manager!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ugh. Yes. That somebody would be this idiot right here.
But you've seemed to have dealt with fools like me in the past, so your knowledge would be greatly appreciated! Pleeeeaasssse! haha
olllive said:
Ugh. Yes. That somebody would be this idiot right here.
But you've seemed to have dealt with fools like me in the past, so your knowledge would be greatly appreciated! Pleeeeaasssse! haha
Click to expand...
Click to collapse
If you want stock, flash a stock ROM, or stock with root, with Odin.
If you want custom, after you flashed that custom kernel, you CAN get into CWM and flash a custom ROM.
and NEVER use ROM manager, hell it was a joke when it came out, sorry koush
EDIT:
and if you do go custom, dont forget to wipe data/factory reset in CWM before flashing.
olllive said:
Ugh. Yes. That somebody would be this idiot right here.
But you've seemed to have dealt with fools like me in the past, so your knowledge would be greatly appreciated! Pleeeeaasssse! haha
Click to expand...
Click to collapse
Pirateghost said:
Somebody used rom manager!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Nice prediction sir! ALSO: WHY! Why would you ever use rom manager.People say it all the dang time that it doesn't work for our device
122ninjas said:
Nice prediction sir! ALSO: WHY! Why would you ever use rom manager.People say it all the dang time that it doesn't work for our device
Click to expand...
Click to collapse
Because it doesn't work for the Samsung galaxy s devices. It never has.
Sent from my Galaxy Nexus using Tapatalk 2
MotoMudder77 said:
If you want stock, flash a stock ROM, or stock with root, with Odin.
If you want custom, after you flashed that custom kernel, you CAN get into CWM and flash a custom ROM.
and NEVER use ROM manager, hell it was a joke when it came out, sorry koush
EDIT:
and if you do go custom, dont forget to wipe data/factory reset in CWM before flashing.
Click to expand...
Click to collapse
You rock. Thank you a ton for being so patient!!
To any other fool who gets into the same mess, I went into DL mode (volume up + volume dwn + usb attached) and opted to let this do the rest of the work because it was the only option that didn't give me a heart attack: androidarea51.com/samsung-galaxy-s-ii/samsung-galaxy-sii-(sgh-i777)-att-only/
From there, I had the option of rebooting, initializing a factory reset... all of the menu options I wasn't seeing when I couldn't figure out how to get into CWM mode. Good luck!!
Pirateghost said:
Because it doesn't work for the Samsung galaxy s devices. It never has.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I know, I know (and this is a dumb excuse, much like using rom manager in the first place), but the tutorial I was reading made it seem like it was a good option. I hadn't used it in forever and logic coupled with faith in a perpetually broken system paves the road to hell, but I figured, "There's no way it still sucks as badly as I remember!"
Don't think that. Ever. My mistake.
Charge the baterry externally thats what I did when my old infuse was bricked
Sent from my SGH-I777
Samsung Galaxy s2 i-777 does not turn on
okay so I read through this thread and I still don't know how to fix my issue. I rooted my phone using Odin v 1.85 and used siyah 3.4.2. I did it successfully and everything was good. I then gave the phone to my cousin and he said he performed a factory reset to get rid of everything on the phone ( contacts ,etc). Now when I turn on the phone it shows the samsung galaxy display with the triangle and then the screen goes black and just blinks. It still goes back into download mode I just dont know what to do to fix the problem. I know I'm a noob but please HELP!!!
mmoncay11 said:
okay so I read through this thread and I still don't know how to fix my issue. I rooted my phone using Odin v 1.85 and used siyah 3.4.2. I did it successfully and everything was good. I then gave the phone to my cousin and he said he performed a factory reset to get rid of everything on the phone ( contacts ,etc). Now when I turn on the phone it shows the samsung galaxy display with the triangle and then the screen goes black and just blinks. It still goes back into download mode I just dont know what to do to fix the problem. I know I'm a noob but please HELP!!!
Click to expand...
Click to collapse
Have you tried flashing back to stock using odin? BTW it is not good etiquette to necro a thread that has been dormant for almost 9 months.
Hey guys
Just to let u know. Today I got Jelly Bean official update, on official unbranded phone in UK with original untouched software and after few hours phone got completely dead !!
Maybe wait with your update until more info will appear around UK.
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
hero000 said:
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
Click to expand...
Click to collapse
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
eljon said:
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
Click to expand...
Click to collapse
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
da-pharoah said:
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
Click to expand...
Click to collapse
I will definitely go tmrw. I hope it's very very rare case.
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
bortak said:
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
Click to expand...
Click to collapse
I will not try something I have no much idea about. I want to save that phone in perfect shape and sell.
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
hero000 said:
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
Click to expand...
Click to collapse
I bought it in Carphone W. I hope they give some replace crap My first time without smartphone since Xperia 1 !!!!! WOW
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
tawheed12 said:
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Sounds the same to me. In the morning I got OTA JB. I was charnging it in the evening. I think last time when I unlocked it and texted was around 11pm, and then after midnight no response. I took battery out for a minute. But nothing, no any sign, even after I plugged in. Nothing.
Recovery Mode
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
PR_Grim said:
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
Click to expand...
Click to collapse
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
eljon said:
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
Click to expand...
Click to collapse
Even charging does not work? Try taking out battery for a longer time and check again.
DoppelgängerGER said:
Even charging does not work? Try taking out battery for a longer time and check again.
Click to expand...
Click to collapse
even charging, no LED. I did try to take batt out for longer. Today I'm going to Carphone W to say what they can do about it.