I am currently running WizzedKAT 2.0 rom with jeboo kernel on my i777. Want to update it to version 3.3 as posted here is S2 Development.
I have tried installing it with jeboo kernel and also with philz but my phone stuck in bootloop or sometimes restarts. Any idea how to install this rom and which is suitable kernel for this rom so my capacitive buttons will work ?
Looks like u need a kitkat kernel with that version 3.3 of WizzedKAT Rom. U could try http://forum.xda-developers.com/showpost.php?p=48770563&postcount=1 RenderBroken's custom kernel.
Sent from my Nexus 5 using Tapatalk
krulex said:
I am currently running WizzedKAT 2.0 rom with jeboo kernel on my i777. Want to update it to version 3.3 as posted here is S2 Development.
I have tried installing it with jeboo kernel and also with philz but my phone stuck in bootloop or sometimes restarts. Any idea how to install this rom and which is suitable kernel for this rom so my capacitive buttons will work ?
Click to expand...
Click to collapse
Actually, I think WizzedKat is still 4.1.2, (just has a modified build.prop); AJK4.9 MicSwap would be your best bet.
SteveMurphy said:
Actually, I think WizzedKat is still 4.1.2, (just has a modified build.prop); AJK4.9 MicSwap would be your best bet.
Click to expand...
Click to collapse
Yes it is based on 4.1.2. Will my capacitive button work on this ajk? And do I have to flash kernel after installing the rom or should I flash the rom using ajk kernel? Because this rom installs kernel as well in the end.
Yes, AJK 4.9 MicSwap will work if that Rom is JB based. Try installing that Rom with AJK, since u r having problems with the install. Then flash AJK after u flash the Rom.
Sent from my Nexus 5 using Tapatalk
no success
still restarting problem. tried ajk 4.9 micswap, philz 2.9 , jeebo 2.2 and dorimanx kernel. No success !
krulex said:
still restarting problem. tried ajk 4.9 micswap, philz 2.9 , jeebo 2.2 and dorimanx kernel. No success !
Click to expand...
Click to collapse
Clean install?
Just checking, but did you enter recovery and perform a wipe data/factory reset to see if it will clear the boot issue?
creepyncrawly said:
Clean install?
Just checking, but did you enter recovery and perform a wipe data/factory reset to see if it will clear the boot issue?
Click to expand...
Click to collapse
This was the procedure I have followed:
1. Rebooted into Recovery.
2. Wipe Full data
3. Wipe cache and dalvik
4. Installed ajk micswap.
5. Advance> reboot recovery
6. Installed wizzedkat 3.3
7. flashed kernel again
8. flashed i777ucmd8 modem.
9. Reboot
krulex said:
This was the procedure I have followed:
1. Rebooted into Recovery.
2. Wipe Full data
3. Wipe cache and dalvik
4. Installed ajk micswap.
5. Advance> reboot recovery
6. Installed wizzedkat 3.3
7. flashed kernel again
8. flashed i777ucmd8 modem.
9. Reboot
Click to expand...
Click to collapse
Okay, clean install. But my question still pertains. Did you enter recovery and perform a wipe data/factory reset after step 9?
Maybe it would do nothing to resolve the boot issue, but it's just the next thing I would try under the circumstances. Sometimes things are so obvious that they get missed or skipped.
is there anyone installed this rom without problem?
want to try this rom but still afraid will get error like these
im currently on Resurrection ROM right now
creepyncrawly said:
Okay, clean install. But my question still pertains. Did you enter recovery and perform a wipe data/factory reset after step 9?
Maybe it would do nothing to resolve the boot issue, but it's just the next thing I would try under the circumstances. Sometimes things are so obvious that they get missed or skipped.
Click to expand...
Click to collapse
I think Rom is not compatible with i777 right now or kernel is an issue. Because I am using wizzedkat 2.0 right now and its working perfectly fine.
krulex said:
I am currently running WizzedKAT 2.0 rom with jeboo kernel on my i777. Want to update it to version 3.3 as posted here is S2 Development.
I have tried installing it with jeboo kernel and also with philz but my phone stuck in bootloop or sometimes restarts. Any idea how to install this rom and which is suitable kernel for this rom so my capacitive buttons will work ?
Click to expand...
Click to collapse
Run the rom wipe script which is given in the 3.3 link and use ajk kernel
FiKsTyLeR said:
is there anyone installed this rom without problem?
want to try this rom but still afraid will get error like these
im currently on Resurrection ROM right now
Click to expand...
Click to collapse
I 've installed this rom on my sgh-i777 and i'm on jeboo kernel.....at first i had issues like you did, it was stuck on samsung logo and kept on restarting.....i tried a couple of times but still the same reuslt....so then i flashed with phillz recovery and did a complete wipe and formatted the system and installed the rom and now it working flawlessly
i guess i'm pretty late but i think you need to give it a try
Related
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
i have the exact same problem!
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I tried and got the samething. I also tried a different cm nightly and got the same results.
InFa_ReD_1 said:
I tried and got the samething. I also tried a different cm nightly and got the same results.
Click to expand...
Click to collapse
me2 only stock roms work for me =(
I think there was an issue with the version of CWM used on the CF-roots since it's been modified by CF and because it's an older version.
After you've rooted with CF, try flashing a kernel on there with a newer version of CWM on there (I used codeworkx's kernel from the Cyanogenmod wiki I've attached below with CWM 4.0.1.4).
Once this kernel is on there, then try flashing the CM7 ROM as per this thread. I prefer flashing from recovery myself, but it's your call.
Make sure you flash it twice in a row if you're having issues.
The problem, as stated above is that cf root kernel installs a modified version of CWM that won't work with CM7. Another thing is you have to flash a stock KH3 because KI3 has the new bootloader (unless you flashed KI3 with the old bootloaders). Then, you have to flash the codeworkx kernel so you get a compatible version of CWM. Once in CWM clear data factory reset + clear cache partition + clear dalvik cache (from advanced).
THIS IS IMPORTANT: Flash the ROM from sd card and when finish do not reboot device, just flash it again without wiping anything in between, just 2 consecutives "install from sd card". When this is done you can reboot the system and then enter again to CWM to flash the google apps .zip file that you can download from the CM7 thread.
Hope this helped. When I flashed CM7 i had exactly the same problem and went back to stock cause it was a pain in the ass to flash it fr the first time. But once you get in CM7, everything becomes great and easy, and you can update the nighlies directly from ROM manager without doing any wiping. You just can't use ROM manager when getting to CM7 for the first time.
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
droidphile said:
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
Click to expand...
Click to collapse
Thanks. Can i flash the orginal CWM over top the CF CWM?
InFa_ReD_1 said:
Thanks. Can i flash the orginal CWM over top the CF CWM?
Click to expand...
Click to collapse
I did it and didn't have any problems, just follow the steps as I posted above.
tomascunill said:
I did it and didn't have any problems, just follow the steps as I posted above.
Click to expand...
Click to collapse
Great thanks for the help it worked I'm now running CM7. One thing though I can make calls but have lost my network connection. Can someone help me with this? Sorry for all the questions I'm new to the whole smartphone business. Thanks.
Ok all fixed up thanks for all your help.
Hello, I hope this is the right group.
I have spent the last 2 days trying to get JB working on my SGS2. I previously had ICS Hydra h2o 1.4.1 ROM on my device.
The troubles started when I tried booting into CWM recovery. The phone wouldn't go past the yellow triangle so I had to use ODIN to flash stock Samsung ICS ROM on the phone to get it working again. I have since tried multiple JB ROMs with different kernels but most of them get past the yellow triangle but then stop on logos varying between kernels. I am also unable to boot into CWM recovery and must flash a CF-Root kernel using ODIN to get into recovery.
It is strange that this happens only with JB ROMs and I have no trouble installing Hydra h2o again through recovery.
I always use the same method of installing ROMs through CWM:
- wipe data/factory reset
- wipe cache
- wipe dalvik
- install .zip from sdcard
I have also tried fixing permissions before and after flashing ROMs, nothing seems to get me into the OS.
One ROM, Vanilla RootBox, I have found to sometimes boot all the way into the OS but the system frequently freezes and is unstable. Looks amazing tho.
Do you have any ideas on how I could get JB ROMs working with my SGS2? Is there anything I am missing?
SynGates said:
Hello, I hope this is the right group.
I have spent the last 2 days trying to get JB working on my SGS2. I previously had ICS Hydra h2o 1.4.1 ROM on my device.
The troubles started when I tried booting into CWM recovery. The phone wouldn't go past the yellow triangle so I had to use ODIN to flash stock Samsung ICS ROM on the phone to get it working again. I have since tried multiple JB ROMs with different kernels but most of them get past the yellow triangle but then stop on logos varying between kernels. I am also unable to boot into CWM recovery and must flash a CF-Root kernel using ODIN to get into recovery.
It is strange that this happens only with JB ROMs and I have no trouble installing Hydra h2o again through recovery.
I always use the same method of installing ROMs through CWM:
- wipe data/factory reset
- wipe cache
- wipe dalvik
- install .zip from sdcard
I have also tried fixing permissions before and after flashing ROMs, nothing seems to get me into the OS.
One ROM, Vanilla RootBox, I have found to sometimes boot all the way into the OS but the system frequently freezes and is unstable. Looks amazing tho.
Do you have any ideas on how I could get JB ROMs working with my SGS2? Is there anything I am missing?
Click to expand...
Click to collapse
Follow this:
-boot to CWM recovery
-wipe data /factory reset
-wipe dalvik cache (under advanced)
-format /system (under mount and storage)
-flash ROM
-flash Gapps (for jelly bean)
-fix permissions
-reboot phone
Done
Swyped from my Samsung Galaxy SII
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
SynGates said:
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
Click to expand...
Click to collapse
Nope
Swyped from my Samsung Galaxy SII
SynGates said:
Thank you for the reply, but that method does not seem to work either.
One thing I have noticed though is when I select wipe data/factory reset it reports an error formatting /sdcard/.android_secure.
Is this something that could be causing my problems?
Click to expand...
Click to collapse
which kernel u were into while flashing the JB rom?
Use siyah or dorimanx kernel it works fine for me must be your kernel
Sun90 said:
which kernel u were into while flashing the JB rom?
Click to expand...
Click to collapse
When I'm flashing I'm using XLPB kernel with CF-root. That's the kernel I flash to get into CWM when the ROMs misbehave.
SynGates said:
When I'm flashing I'm using XLPB kernel with CF-root. That's the kernel I flash to get into CWM when the ROMs misbehave.
Click to expand...
Click to collapse
try this.
after flashing Cf-root kernel from ODIN.
1) flash the .zip file of siyah kernel v3.5.2 for S2, dwnld the same Here.
2)after that reboot into siyah kernel recovery.
3) wipe data/factory reset, then wipe cache and dalvik.
4) flash the JB rom zip file(Vanilla root box).
5)reboot ur phone and see.
ps- before doing wipes and rom flash do please backup ur exsisting rom once ur into siyah kernel recovery first
Sun90 said:
try this.
after flashing Cf-root kernel from ODIN.
1) flash the .zip file of siyah kernel v3.5.2 for S2, dwnld the same Here.
2)after that reboot into siyah kernel recovery.
3) wipe data/factory reset, then wipe cache and dalvik.
4) flash the JB rom zip file(Vanilla root box).
5)reboot ur phone and see.
ps- before doing wipes and rom flash do please backup ur exsisting rom once ur into siyah kernel recovery first
Click to expand...
Click to collapse
Gives me Kernel panic or stops at the triangle loading screen. Seems the only way to get into CWM is through CF-root.
SynGates said:
Gives me Kernel panic or stops at the triangle loading screen. Seems the only way to get into CWM is through CF-root.
Click to expand...
Click to collapse
Use a newer version of siyah or dorimanx, they should work fine
Sent from my GT-I9100 using xda app-developers app
I have tried three versions of syiah, including 4.1.4 but I will try dorimanx and report with the results.
edit: dorimax kernel is the same.
One thing I noticed tough is whenever I wipe dalvik cache the system reports "unknown volume for /ext-sd blablabla" - maybe this is connected to my problem?
I am at a complete stop...
No JB kernels seem to work whatsoever. Is there any wit to flash the bootloader? Or is that even possible?
I really would like to get JB working on my device.
There must be something about the previous state of my phone, some files or folders that are in the way or are missing or somewhat. Is there any way to completely reset the phone? Not just factory resetting it since that is not working.
edit: Progress! These are my steps:
- Downloaded fresh stock Samsung ROM and another version of CF-root.
- Flashed stock ROM and then CF-root kernel.
- Booted into recovery and did the whole wipe.
- Flashed .zip twice (don't know if that did the trick or what)
- Wipe dalvik cache and fix permissions.
After that the phone booted normally and I'm now running ResurrectionRemix with Android 4.1.1, hoping it wil be awesome as ****.
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
Hi,
Today I tried ti flash an Android 4.2.2 Rom. First I installed Siyah Kernel and then SuperNexus 2.0.
The Problem is, that the Phone restarts while booting up Android, sometimes when the X is shown up and sometimes a few seconds later.
I made a factory reset and wiped all Data. I tried another Rom (Slim Bean) but there was the same Problem.
Please Help Me,
Maize
After you flashed rom you flashed a kernel? If yes probably kernel is incompatible else try rom nuke script and flash rom and gapps again
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
that doesn't work, any other Ideas??? and i didn't flash a kernel after flashing the rom
Maizelll said:
that doesn't work, any other Ideas??? and i didn't flash a kernel after flashing the rom
Click to expand...
Click to collapse
Flash rom and kernel nuke scripts via recovery.
Flash Rom.
If you still get reboots go back into recovery and wipe data/factory reset and reboot device.
Which specific model of S2 do you have?
Same problem, it's a SGS2 I9100
My SamSung S2 up rom Stock 4.1.2 via odin or cook rom base 4.1.2 via CMW is bootlooped logo S2 I wipped all before and after uprom. And i up 2.3.6 or 4.0.3 or stock rom > 4.2 is not bootloop. i want up Wanna lite 4.1.2 rom, how to fix bootloop? Thanks you very much, sorry for my bad english.
P/S: When i change Mobile Networks to GSM only is Not Service, i can call when change Mobile Networks to 3G with poor network.i tried modems.
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Donnie Sins said:
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Click to expand...
Click to collapse
Yes, it is still boot loop, i flash form Wannalite 4.0.3 via Philz to Wannalite base 4.1.2, Stock rom 4.1.2 also bootloop.
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Donnie Sins said:
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Click to expand...
Click to collapse
Yes, i flashed stock 4.0.3, many Custom rom 4.2 or 4.3 it ok. but when i flash custom rom base 4.1.2 is bootloop even stock 4.1.2 still boot loop.
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Tinhte1989 said:
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Click to expand...
Click to collapse
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Donnie Sins said:
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Click to expand...
Click to collapse
It still bootloop. i did not wipe after flashed
blueforever89 said:
It still bootloop. i did not wipe after flashed
Click to expand...
Click to collapse
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Donnie Sins said:
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Click to expand...
Click to collapse
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
blueforever89 said:
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I've no idea... Good luck anyway:thumbup:
Donnie Sins said:
Sorry, I've no idea... Good luck anyway:thumbup:
Click to expand...
Click to collapse
i don't know why i can't Flash rom base 4.1.2 JB!
Thanks for your help!
Any idea? Please Help me,
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
doctor_droid said:
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
Click to expand...
Click to collapse
I flashed I9100XWLSW_NeatROM_Lite_v4.8.zip rom with Same MD5 Sum. But not getting out Bootloop Android Neatrom, i tried many stock 4.1.2, or cook like wamma lite, Neat base 4.1.2. all is getting bootloop. Other rom not Base 4.1.2 is ok. I can't understand.
Have Any Idead?