Hi Mine ZEN ULTRAFONE 701. I rooted the device and installed note 3 ROM. Then i changed to Scavenger V4 Rom.
Then i installed a font pack through Recovery. Then the device rebooted and stuck at logo. Can't go into Recovery mode. Whether any one have the solution for this.
i help you
Install the Stock Firmware, the problem, can caused for the root or by installing an unsupported ROM, a question:
the ROM The note 3 was ported?
Yes
OceanDEV said:
Install the Stock Firmware, the problem, can caused for the root or by installing an unsupported ROM, a question:
the ROM The note 3 was ported?
Click to expand...
Click to collapse
yes its a ported ROM.
How to install the Stock firmware:crying:
Stock firmware
Where can i find the Stock firmware
if sure the rom works
seem like flash failed, try flashing it again
Flashing??
ulefone said:
seem like flash failed, try flashing it again
Click to expand...
Click to collapse
Flashing With Recovery or Cutom Rom??
Related
I want to flash twrp custom recovery for my device samsung galaxy young s6312, stock android 4.1.2 jellybean, rooted, stock recovery. Does anyone know of a method or tutorial?? I searched but couldn't find anything. Thanks...
mayank06199 said:
I want to flash twrp custom recovery for my device samsung galaxy young s6312, stock android 4.1.2 jellybean, rooted, stock recovery. Does anyone know of a method or tutorial?? I searched but couldn't find anything. Thanks...
Click to expand...
Click to collapse
Try this thread : http://forum.xda-developers.com/showthread.php?p=42739231
Couldn't find any TWRP but i found a CWM one.
Well, I already know of this tutorial and also tried it once. But i couldn't use rom manager with this device, as the device would get stuck in recovery if I used rom manager. Moreover, there are some features in TWRP I would like to try out and its interface is better. Not saying that CWM is not good, but I would like to try out TWRP. Thanks, though....
Sorry!!
mayank06199 said:
Well, I already know of this tutorial and also tried it once. But i couldn't use rom manager with this device, as the device would get stuck in recovery if I used rom manager. Moreover, there are some features in TWRP I would like to try out and its interface is better. Not saying that CWM is not good, but I would like to try out TWRP. Thanks, though....
Click to expand...
Click to collapse
Well no twrp compatile with our device yet but you can the cwm developer to try porting twrp too!
--
--
akashpaul21 said:
Hey everybody. I just wanted to point out one issue which I faced.. Actually still facing, while shifting from one custom ROM to another.
Getting straight to the point. Few days earlier I installed this custom ROM named "MERE" abv. For "most epic ROM ever" in my canvas a116 (HD)
But now when i tried to install another custom rom "miui v.4.6.27" the ROM got installed but every time I boot, the opening screen of "mere" pops up. I have wiped data and did all the requisites from the recovery menu. And yea another thing, when trying to enter the recovery too, the opening screen of "mere" is popping out before the options "volume up for recovery. Volume down for factory" comes to fore.
I would be highly grateful if some body can suggest a way to remove the opening screen of the previous ROM. Thank you
P.s. I use cwm.
Click to expand...
Click to collapse
Because MIUI dont change logo.bin. You need to flash stock rom or stock deodexed rom by cmahendra. Then install Miui. I dont know how to change in running android.
shivrajsingh said:
Because MIUI dont change logo.bin. You need to flash stock rom or stock deodexed rom by cmahendra. Then install Miui. I dont know how to change in running android.
Click to expand...
Click to collapse
Hey thanks for replying, i actually tried to flash a stock rom still no effect ! i tried to flash this one http://forum.xda-developers.com/showthread.php?t=2306461 with no avail. i will try to flash the one you said and will let ya know
akashpaul21 said:
Hey thanks for replying, i actually tried to flash a stock rom still no effect ! i tried to flash this one http://forum.xda-developers.com/showthread.php?t=2306461 with no avail. i will try to flash the one you said and will let ya know
Click to expand...
Click to collapse
It also might not have included logo.bin. But I have tried cmahendra's stock deodexed rom many times. That will surely work. Just flash that and miui after that. No data wipe needed.
--
Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount section system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.
Thos is not the right place to post there is @VECTUS please move this thread and u got bootloop bcoz u need to be on kitkat and u flashed on jellybean
How can I flashed kitkat or stock kitkat
I dont know how to move thread
vowels787 said:
How can I flashed kitkat or stock kitkat
Click to expand...
Click to collapse
Via odin
I have tried numerous ROMS, but the only one, that worked was a prerooted original Samsung 4.1.2 ROM, that was fully loaded by Odin.
All other ROMS are stuck in the boot process.
I have done:
Install root - CWM or similar
Wiped
Install ROM
Any suggestions for a Kit-Kat ROM, that is debloated and working?
Torben67 said:
I have tried numerous ROMS, but the only one, that worked was a prerooted original Samsung 4.1.2 ROM, that was fully loaded by Odin.
All other ROMS are stuck in the boot process.
I have done:
Install root - CWM or similar
Wiped
Install ROM
Any suggestions for a Kit-Kat ROM, that is debloated and working?
Click to expand...
Click to collapse
Go to this link and download stock 4.4 and flash it with odin. Then reflash twrp and then try the custom roms. I think that you still have JB bootloader. Need to upgrade to KK to get the bootloader.
https://www.sammobile.com/firmwares/galaxy-tab3/SM-T211/
Sent from my XT1609 using Tapatalk
Which firmware from your link or is it not an issue?
Anyway I tried one version, but CWM could not install it??
RealWelder said:
Go to this link and download stock 4.4 and flash it with odin. Then reflash twrp and then try the custom roms. I think that you still have JB bootloader. Need to upgrade to KK to get the bootloader.
https://www.sammobile.com/firmwares/galaxy-tab3/SM-T211/
Sent from my XT1609 using Tapatalk
Click to expand...
Click to collapse
Torben67 said:
Which firmware from your link or is it not an issue?
Anyway I tried two versions, but CWM could not install it??
Click to expand...
Click to collapse
It reports not being able to "Update", so I guess it is an update - not an complete installation??
Torben67 said:
It reports not being able to "Update", so I guess it is an update - not an complete installation??
Click to expand...
Click to collapse
Doesn't matter I don't think. You have to flash that firmware with Odin and the device in download mode. Once it's finished you'll have stock 4.4 and the KK bootloader. Then reflash cwm with Odin, then use cwm to install the custom ROMs.
Sent from my XT1609 using Tapatalk
Hello, I have one big problem with my mate 10 lite
The problem is, when i flash twrp everything is okay, but when i try to flash any custom rom - I always have bootloop, on every custom :/
I tried to use eRecovery to install stock but it ends in the same way - bootloop
What can I do?
I really wanted to switch for custom...
Try using 338 stock rom and then install custom rom.
petanque said:
Try using 338 stock rom and then install custom rom.
Click to expand...
Click to collapse
okay, finally i installed custom, but i have one question
what if i want to change custom to another custom?
because i found instruction to flash custom (in aex thread) and its only possible way to flash rom on my device, so how to flash another rom?
DombroPL said:
okay, finally i installed custom, but i have one question
what if i want to change custom to another custom?
because i found instruction to flash custom (in aex thread) and its only possible way to flash rom on my device, so how to flash another rom?
Click to expand...
Click to collapse
You can install other custom ROMs even if you are already on a custom ROM. The thing is all steps indicated
in custom ROM threads, ask you to wipe, and format so already they are cleaning necessary things, before actual
installation (flashing) step starts. But the cleaning is not like a proper clean i.e. done by stock recovery, so if you want
to install a new custom ROM, its better to first install Stock recovery, then wipe/format, then install TWRP, and proceed
with new Custom ROM installation.
If any thing does not work for you, then install ur stock ROM, and then install the new custom ROM ur interested in.
DombroPL said:
Hello, I have one big problem with my mate 10 lite
The problem is, when i flash twrp everything is okay, but when i try to flash any custom rom - I always have bootloop, on every custom :/
I tried to use eRecovery to install stock but it ends in the same way - bootloop
What can I do?
I really wanted to switch for custom...
Click to expand...
Click to collapse
Hi. I have same problem like you with my RNE-L21. I cannot flashing any ROM even stock B338...
beacouse gives me bootloop.
TWRP installed - FRP unlock - Bootloader unlock
Wojtek1979mildner said:
Hi. I have same problem like you with my RNE-L21. I cannot flashing any ROM even stock B338...
beacouse gives me bootloop.
TWRP installed - FRP unlock - Bootloader unlock
Click to expand...
Click to collapse
I reckon you must have missed some step, as I did tried most of the ROMs shared in this mate 10 lite
section of XDA forums. Specially the part after installation which says to flash Stock recovery n give it a wipe/format that makes the ROM installation proper, later you can install custom recovery.
For stock ROM, HuruUpdater works with TWRP, try one version of HuruUpdater, if it does not work change your
custom recovery to some other custom recovery (other TWRP, you will find many in this forum), and eventually
one of them will work for u. Still, it doesnt work, change the HuruUpdater version to an earlier version, and repeat
the process.
usman400 said:
I reckon you must have missed some step, as I did tried most of the ROMs shared in this mate 10 lite
section of XDA forums. Specially the part after installation which says to flash Stock recovery n give it a wipe/format that makes the ROM installation proper, later you can install custom recovery.
For stock ROM, HuruUpdater works with TWRP, try one version of HuruUpdater, if it does not work change your
custom recovery to some other custom recovery (other TWRP, you will find many in this forum), and eventually
one of them will work for u. Still, it doesnt work, change the HuruUpdater version to an earlier version, and repeat
the process.
Click to expand...
Click to collapse
I dont know what's happening. Couple months ago every Custom Rom working perfectly. Now i have only trouble. In TWRP many errors, bootloops... EMUI 8 is borring . I try step by step your solutions. Thanks Mate
---------- Post added at 09:10 PM ---------- Previous post was at 09:04 PM ----------
Wojtek1979mildner said:
I dont know what's happening. Couple months ago every Custom Rom working perfectly. Now i have only trouble. In TWRP many errors, bootloops... EMUI 8 is borring . I try step by step your solutions. Thanks Mate
Click to expand...
Click to collapse
Last question. Which one of the TWRP Is good or maybe best for RNE-L21? I try every from tool team-mt. Thanks for answer. Regards
Wojtek1979mildner said:
Last question. Which one of the TWRP Is good or maybe best for RNE-L21? I try every from tool team-mt. Thanks for answer. Regards
Click to expand...
Click to collapse
There is no best recovery that will work in every possible situation (e.g. Stock ROM flashing, Custom ROM flashing, backup/restore etc.). So for each custom ROM u better use the recovery that is indicated in that custom ROM thread.