^(title)
also is it possible to flash it over 4.1.2 retail gb?
thanks
Retail.au have Russian.
XT1033 cihazımdan Tapatalk kullanılarak gönderildi
Can't find a 4.1.2 retail au fastboot, can I apply 4.0.4 and then 4.1.2 OTA via rsd?
(Currently running 4.1.2 retail GB)
If you're still on 4.0.4, you can flash retail.eu 4.0.4 fastboot and ota to 4.1.2 of retail.au.
DenisF said:
(Currently running 4.1.2 retail GB)
Click to expand...
Click to collapse
Semseddin said:
If you're still on 4.0.4...
Click to expand...
Click to collapse
Then you'll need to root and install safestrap and flash ArtMod 4.3.1 here. It has russian locale and is nicely optimized.
I want the phone to stay stock, without safestrap/bmm/root etc'
I'll try to switch from en.gb to en.au, should work, cdt version 7 on both.
now i just need to find 4.1.2 au fastboot or 4.0.4 and 4.1.2 ota to flash via rsd..
There's no 4.1.2 retail.au fastboot. You can't flash 4.0.4 retail.au fastboot. Do whatever you want. I'm out !
DenisF said:
^(title)
also is it possible to flash it over 4.1.2 retail gb?
thanks
Click to expand...
Click to collapse
Any asia one. But not eastern like chineese. Any europeans firmware does not have RU lang, it is obvious.
Related
Hi can anyone tell me if you just use odin to root your GS3 and do nothing else except run the rooting process will it reboot and still have stock ICS 4.0.4 on my device and will I still be able to download the upcoming OTA jelly bean update from Samsung?
Gary
No, you will loos the update of course, but nothing else .
metzo32 said:
No, you will loos the update of course, but nothing else .
Click to expand...
Click to collapse
Thanks, so I will have to flash a custom ROM..? or will I just lose the update and still be running ICS 4.0.4 and I will just have to flash jelly bean once its released officialy?
gary7dayz said:
Thanks, so I will have to flash a custom ROM..? or will I just lose the update and still be running ICS 4.0.4 and I will just have to flash jelly bean once its released officialy?
Click to expand...
Click to collapse
Yes ,you can just flashed through Odin, and then root it again if you like
gary7dayz said:
Thanks, so I will have to flash a custom ROM..? or will I just lose the update and still be running ICS 4.0.4 and I will just have to flash jelly bean once its released officialy?
Click to expand...
Click to collapse
You could flash it via Odin, or alternatively flash your stock ICS rom again and then update via KIES (just don't root before using KIES)
EDIT: KIES or OTA
Rooted and on the stock Jellybean 4.1.1 firmware from Samsung. thank's for the advice, I'm a expert now lol.
Sent from my GT-I9300 using xda app-developers app
Hello mates
am from India
vodafone IN
Right now i'm on jelly bean stock rooted rom but i need to restore to stock jelly bean (and then root it myself)
So i need stock firmware for Jelly bean for International Galaxy S3
I tried to find it using Check fus but didnt help
thank you
abelle_abelle said:
Hello mates
am from India
vodafone IN
Right now i'm on jelly bean stock rooted rom but i need to restore to stock jelly bean (and then root it myself)
So i need stock firmware for Jelly bean for International Galaxy S3
I tried to find it using Check fus but didnt help
thank you
Click to expand...
Click to collapse
There is only one (Polish) stock JB unbranded (not Vodafone) rom atm http://www.hotfile.com/dl/173577508/3316be3/I9300XXDLIB_I9300OXFDLI1_XEO.zip.html.
gee2012 said:
There is only one (Polish) stock JB unbranded (not Vodafone) rom atm .
Click to expand...
Click to collapse
thank you
what should i do if i want to clean restore
will i be able to OTA update if i restore back to 4.0.4 nandroid backup and then OTA update to Jelly bean ?
or should i restore to stock 4.0.4 android and then OTA update to JElly bean ?
abelle_abelle said:
thank you
what should i do if i want to clean restore
will i be able to OTA update if i restore back to 4.0.4 nandroid backup and then OTA update to Jelly bean ?
or should i restore to stock 4.0.4 android and then OTA update to JElly bean ?
Click to expand...
Click to collapse
Download the OTA 4.1 Poland firmware & flash it through Odin. That's it, you are good to go. Then you can root & install CWM.
abelle_abelle said:
thank you
what should i do if i want to clean restore
will i be able to OTA update if i restore back to 4.0.4 nandroid backup and then OTA update to Jelly bean ?
or should i restore to stock 4.0.4 android and then OTA update to JElly bean ?
Click to expand...
Click to collapse
You will only receive OTA`s for the rom of your region, if you want that just flash the Indian JB rom and do not root, If you are rooted OTA`s will not be installed as you have a custom recovery. You can however update with Kies, but you will loose root. See item 3 in my signature how to flash with Odin.
gee2012 said:
You will only receive OTA`s for the rom of your region, if you want that just flash the Indian JB rom and do not root, If you are rooted OTA`s will not be installed as you have a custom recovery. You can however update with Kies, but you will loose root. See item 3 in my signature how to flash with Odin.
Click to expand...
Click to collapse
Bummer i can't use kies on WINDOWS 8
so only way i see is
first i will reset user partition then restore to 4.0.4 NANDROID backup
then use Stock Jelly bean Deodexed rooted rom by wanam
upon wsTEDi
sidthegreatest said:
Download the OTA 4.1 Poland firmware & flash it through Odin. That's it, you are good to go. Then you can root & install CWM.
Click to expand...
Click to collapse
okay
what about vodafone IN CSC ?
after flashing it using ODIN i need to root it with this right
forum .xda-developers.com/showthread.php?t=1695238 (remive space)
thanks for the help
i want a rom for EU 4.1.2 offical,thankyou!
zjx9461 said:
i want a rom for EU 4.1.2 offical,thankyou!
Click to expand...
Click to collapse
are you sure to getted 4.1.2 EU offical?
jaychoo said:
are you sure to getted 4.1.2 EU offical?
Click to expand...
Click to collapse
my phone is china 4.1.2,i want to install hashcode's cm10.1,i install it to rom-slot1,but can't boot ,so i thk is the rom&kernel's problem
I want lap dance from playboy bunny
zjx9461 said:
i want a rom for EU 4.1.2 offical,thankyou!
Click to expand...
Click to collapse
So do we all. There isn't one. In fact, can I demand 4.2.2 Hong Kong, thanks.
Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
williamlaw said:
Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
Click to expand...
Click to collapse
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
hrishi21007 said:
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
Click to expand...
Click to collapse
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
williamlaw said:
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
Click to expand...
Click to collapse
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
hrishi21007 said:
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
Click to expand...
Click to collapse
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
williamlaw said:
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
Click to expand...
Click to collapse
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
hrishi21007 said:
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
Click to expand...
Click to collapse
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you have BMM installed on ur RAZR...u can switch 4.0.4 to 4.1.2 and beyond and back till 4.0.4
Thanks All !!
welder73 said:
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
Click to expand...
Click to collapse
one more question, if i backup from system 1, then MUST restore it on system 1 ?? I can't restore on other system 2,3,4 ??
thanks
ogerors seen
Good to know, understand, I'm learning a lot with you
Hi, I have the non efigs retail version and I'm currently on ICS.
Can anyone please help me know and understand if i can update to JB?
System version 672.180.41.xt910.NonEFIGSRetail.en.EU
Android version 4.0.4
I will post screenshots of my system later, if required. Thanks for ur response.
NonEFIGS.Retail.en.EU
All help is appreciated. If u need more information about my phone, please lemme know.
I really wanna update my phone to jelly bean but have found no way of doing it.
Can i update my NonEFIGS to EFIGS.Retail?? Is that feasible? Will my phone work if I do that update?
Thanks.
Custom ROM??
Hi, Can anyone please take a look and let me know if its possible.
I am on ICS and need to move to JB. My phone is rooted and will not receive any further OTA updates.
Is it possible for me to move to JB? Do I need to install a custom ROM?
If yes, which custom ROM should I install?
Please help.
rockykoston said:
All help is appreciated. If u need more information about my phone, please lemme know.
I really wanna update my phone to jelly bean but have found no way of doing it.
Can i update my NonEFIGS to EFIGS.Retail?? Is that feasible? Will my phone work if I do that update?
Thanks.
Click to expand...
Click to collapse
I will suggest that you flash first official ICS with RSD Lite and then JB.
Here are all official fastboot files,I flashed This one,that´s Retail British 693,3 Mb.
And then flash JB with RSD Lite,Here are the firmwares,you can flash any firmware for europe
welder73 said:
I will suggest that you flash first official ICS with RSD Lite and then JB.
Here are all official fastboot files,I flashed This one,that´s Retail British 693,3 Mb.
And then flash JB with RSD Lite,Here are the firmwares,you can flash any firmware for europe
Click to expand...
Click to collapse
Hi, thanks for the response.. I am already on ICS 4.0.4 OTA update , so do I need to flash official ICS?
rockykoston said:
Hi, thanks for the response.. I am already on ICS 4.0.4 OTA update , so do I need to flash official ICS?
Click to expand...
Click to collapse
That's ok then,just flash JB.
Sent from my Razr XT910
Could you let me know if flashing JB on your phone worked, very interested to hear the result
SanchoPwnza said:
Could you let me know if flashing JB on your phone worked, very interested to hear the result
Click to expand...
Click to collapse
Sure, i will try this definitely, but maybe in 2 weeks. Don't have time for next two weeks. Will post the results here asap