Can someone give me the link to download cwm 6.0.1.5 boot img ? Thanks
tngultimate said:
Can someone give me the link to download cwm 6.0.1.5 boot img ? Thanks
Click to expand...
Click to collapse
Here you are. I recomend TWRP. Is better.
You can flash after install CWM. Good luck.
hello guys...i flashed cwm 6.0.1.5 succesfully...i tried to mack a back up on internal or external and i couldnt....says error can t mount path...after few tries it just sayng : back up boot.img...but no progress
i m on chines vibe ui 1.5
mightymike2012 said:
hello guys...i flashed cwm 6.0.1.5 succesfully...i tried to mack a back up on internal or external and i couldnt....says error can t mount path...after few tries it just sayng : back up boot.img...but no progress
i m on chines vibe ui 1.5
Click to expand...
Click to collapse
Try with TWRP and tell me how it works.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
stympy said:
Here you are. I recomend TWRP. Is better.
You can flash after install CWM. Good luck.
Click to expand...
Click to collapse
How to install ?
tngultimate said:
How to install ?
Click to expand...
Click to collapse
You could install from MobileUncle Tool:
Extract from zip file: recovery.img
Put the img file on your media storage NOT ON YOUR SD CARD!
Open MobileUncle Tool
Go to Recovery Update;
You will find there recovery image
Patch.
Second way is:
If you have allready CWM installed
Copy zip file on your phone
Restart to recovery
Patch zip file.
Hope this will help you.
stympy said:
You could install from MobileUncle Tool:
Extract from zip file: recovery.img
Put the img file on your media storage NOT ON YOUR SD CARD!
Open MobileUncle Tool
Go to Recovery Update;
You will find there recovery image
Patch.
Second way is:
If you have allready CWM installed
Copy zip file on your phone
Restart to recovery
Patch zip file.
Hope this will help you.
Click to expand...
Click to collapse
I use a lot of ways but I can't extract boot.img from it. Is there any other ways?
tngultimate said:
I use a lot of ways but I can't extract boot.img from it. Is there any other ways?
Click to expand...
Click to collapse
There is no boot.img file there. Recovery.img is the file you must extract and patch.
stympy said:
There is no boot.img file there. Recovery.img is the file you must extract and patch.
Click to expand...
Click to collapse
So what's the full way to install cwm? Thx a lot
Related
hi guys can anyone guide me to root the gingerbread mt6575?
Please!
touseefiqbal said:
hi guys can anyone guide me to root the gingerbread mt6575?
Click to expand...
Click to collapse
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
solution
jheysonamc said:
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
Click to expand...
Click to collapse
install usb vcom drivers first
i think i have found.. download mtkdroid tools and sp flash tool put usb debugging mode on and connect through usb and run mtkdroidtools when it detects then click on block maps i think.... now a table open click on create scatter... now scatter created...open sp flash tool..load scatter click on read back then double click on first page-only now choose page only then on lenght give the chache address from scatter when done click ok... take the battery out and connect your mobile through usb without battery.now click on read back when its done then tell me
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Avvio 760 Root!!!
Ronny927 said:
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Dont Work Help Me!!!
hey
jheysonamc said:
Dont Work Help Me!!!
Click to expand...
Click to collapse
i tell you something why you didnt follow it?
jheysonamc said:
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
Click to expand...
Click to collapse
Give some more details about ur phone, I can help u to root.
Sent from my A2 using xda app-developers app
touseefiqbal said:
hi guys can anyone guide me to root the gingerbread mt6575?
Click to expand...
Click to collapse
Download root genius for pc
Open it with administrator rights and root
I have used SD TWRP to flash CM, but how do I get 2.6.3.1? It is not automatically flashed in GooManager...
alevineman said:
I have used SD TWRP to flash CM, but how do I get 2.6.3.1?
...
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/acclaim
How do I flash it?
alevineman said:
How do I flash it?
Click to expand...
Click to collapse
To update emmc /recovery, use SD based recovery to flash a flashable recovery zip that contains the new emmc recovery version -- see http://forum.xda-developers.com/showpost.php?p=49024436&postcount=105 and http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8.
There is no zip for 2.6.3.1, but I found an app that flashes the recovery for me; this issue is solved.
alevineman said:
There is no zip for 2.6.3.1, but I found an app that flashes the recovery for me; this issue is solved.
Click to expand...
Click to collapse
It's now a moot point as your issue is solved, but you could make a flashable zip for any recovery .img using info at the link I referenced above (http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8).
hello all,
you can convert the file to be attached to me a file cwm in a file flashable with the stock recovery, please let help me
I tried to change the name of the file to update.zip, but the stock recovery gives me error: (
sam150580 said:
hello all,
you can convert the file to be attached to me a file cwm in a file flashable with the stock recovery, please let help me
I tried to change the name of the file to update.zip, but the stock recovery gives me error: (
Click to expand...
Click to collapse
you can't flash zip file using stock recovery it will give signature error
it is only flashable using cwm
Vaibhav Chauhan said:
you can't flash zip file using stock recovery it will give signature error
it is only flashable using cwm
Click to expand...
Click to collapse
so you can not create one flashabile with the stock recovery, with the same files??
sam150580 said:
so you can not create one flashabile with the stock recovery, with the same files??
Click to expand...
Click to collapse
you don't understand what i am telling
you should flash cwm recovery to flash this file
you can't flash using stock recovery
Vaibhav Chauhan said:
you don't understand what i am telling
you should flash cwm recovery to flash this file
you can't flash using stock recovery
Click to expand...
Click to collapse
ok understood
sam150580 said:
ok understood
Click to expand...
Click to collapse
:good:
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Hi everyone!
I´m using the build of Lineage OS 20170225, everything works fine but when i try to flash a permissive kernel to fix the mods (is in the lineage thread), the recovery said "Error opening: ´/sdcard/...../boot.img/´ (Not a directory)"
What can i do?
I tried to change the root where the file is, but nothing changed...
Sorry for the bad english
Are you trying to open the boot.img file? In TWRP you need to swap to image install not zip, and flash it to the boot partition.
Also make sure you're on the latest TWRP (3.0.3-n2), and maybe re download the boot.img incase it's corrupted.
Hope this helps :good:
supacrazyguy42 said:
Are you trying to open the boot.img file? In TWRP you need to swap to image install not zip, and flash it to the boot partition.
Also make sure you're on the latest TWRP (3.0.3-n2), and maybe re download the boot.img incase it's corrupted.
Hope this helps :good:
Click to expand...
Click to collapse
You´re my hero!!!! hahahaha :victory:
Update the TWRP in the last version and finally could flash the kernel
elpela86 said:
You´re my hero!!!! hahahaha :victory:
Update the TWRP in the last version and finally could flash the kernel
Click to expand...
Click to collapse
Great! Glad it worked now :highfive: