huawei u8687 firmware needed - Android Q&A, Help & Troubleshooting

hey folks im stuck I flashed the wrong recovery to my u8687 I cant get the fastboot purple screen to come on (yes I unlocked bootloader)
and im pretty sure which recovery I want flash but cant get fastboot to recognize my device and I forget which drivers I installed for the thing.
so either get the Huawei-u8687-wind firmware are if someone can pls point me in the right direction. thx
fyi if anyone can help with getting this firmware:
HUAWEI_U8687_firmware(U8687,Android_4.0,V100R001C113B968,Canada-Wind,05011SPV).zip

hey did u ever get anywhere with ur problem ???? how did u unlock the bootloader....

Related

[q] how to select original perfect rom

Dear supporter i have few qty of HTC DESIRE ,,it becomes restart as POWER ON ,,, i have HARD RESET ,,,but still same its S.ON means not rooted as yet ,,, so i just want to flash it by ORIGNAL RUU FILEs from SHIPPED ROM ,,, but before downloading ,,,iam totaly confuse wanna to know which RUU should i download enable to flash my phone ,,,,,,because i know if i flash it by wrong RUU files ,,,its bootloader will get destroy and i dont want to do this mistake ,,,What should i see in phone and what should i see in RUU file ? if anybody can guide me in proper manner ,, i would be realy apreciated.
waiting for kind replies.

Bricked DX

I bricked my DX when i installed Sense.Revolution.R5 and then i installed all ****s that can install and my phone was laggy and buggy.But that isn't the problem.I try it to back on stock rom and my phone is dead now.I have RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed and i read that i need to remove root accses and lock boothloader...But when i lock it my phone can't turn on anymore...And to back on stock Need to be on...What to do now ?!?!!??!
mefistoreyon said:
I bricked my DX when i installed Sense.Revolution.R5 and then i installed all ****s that can install and my phone was laggy and buggy.But that isn't the problem.I try it to back on stock rom and my phone is dead now.I have RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed and i read that i need to remove root accses and lock boothloader...But when i lock it my phone can't turn on anymore...And to back on stock Need to be on...What to do now ?!?!!??!
Click to expand...
Click to collapse
Did you reinstall Stock Recovery before you locked the Bootloader?
No...The first time i install it and the relocked boothloader and then was tottaly dead cuz cant boot and i cant use recovery to flash anything...And i forgot but im afraid cuz if i cant turn on phone and use recovery...So i need to flash stock recovery and relock bootloader and all will be ok ?!
mefistoreyon said:
No...The first time i install it and the relocked boothloader and then was tottaly dead cuz cant boot and i cant use recovery to flash anything...And i forgot but im afraid cuz if i cant turn on phone and use recovery...So i need to flash stock recovery and relock bootloader and all will be ok ?!
Click to expand...
Click to collapse
You need to have an unlocked bootloader in order to flash the recovery. Can you boot into your bootloader screen? If so, you should be able to unlock your bootloader again and then you can flash the stock recovery, relock the bootloader and then run the RUU.
God...Thanks man! You save my DX x10 Youre right...I do what you told me...I was following steps that says phone must be on...Now everything is ok Thank you
One more question...Now everything is stock right ?!?! I can recive and install updates ?
mefistoreyon said:
God...Thanks man! You save my DX x10 Youre right...I do what you told me...I was following steps that says phone must be on...Now everything is ok Thank you
One more question...Now everything is stock right ?!?! I can recive and install updates ?
Click to expand...
Click to collapse
Glad to hear it! :highfive: If you followed those steps you should be back to stock and will be able to receive updates, etc.

[HELP] Bootloader driving me crazy!! Help!

Hi guys.
This is my x10a:
es.tinypic.com/view.php?pic=6854cj&s=8
(I guess I cant post some links, I hope you can see the picture)
I dont know what to do next. It has xRecovery, and its Rooted, both things via Flashtool. I guess its Ginger 2.3.3.
So I need the Bootloader Unlock. S1tool says I have to unlock something with Setool2. The problem is i cant find Setool2 ANYWHERE.
Im a bit lost indeed. Im new with Xperias.
Please, please, my phone is slow, laggy, the camera does not work, it gets freezed. Can someone indicate me what to do next? I want to install a custom rom, to improve my phones perfomance, but I cant do it because of that Bootloader thing. Please some advices please!
Thanks for all.
EDIT: At least, I want to re-install the 2.3.3 Stock Rom. I have the ROM TFT file. What should I do? Just flash it with Flashtool? No kernel issue or something rare like that? Dont want to brick it. Please help!
Flash it : http://www.mediafire.com/download/g261sds11dt91ug/Xperia+X10_2.3.3_Generic.rar
Unzip the rar file and flash the ftf with flashtool. It's a french firmware : you must change the language to spanish
If you just want install a new custom rom, put your phone in flash mode and clic unlock bootloader on flashtool. Read the instructions and your phone will reboot two times. Once done, flash your new kernel and new rom
Thanks
dekefake said:
Flash it : http://www.mediafire.com/download/g261sds11dt91ug/Xperia+X10_2.3.3_Generic.rar
Unzip the rar file and flash the ftf with flashtool. It's a french firmware : you must change the language to spanish
If you just want install a new custom rom, put your phone in flash mode and clic unlock bootloader on flashtool. Read the instructions and your phone will reboot two times. Once done, flash your new kernel and new rom
Click to expand...
Click to collapse
Thanks for your answer friend, but it seems to be that my bootloader cannot be unlocked. Ive already tried that. I flashed a Generic 2.3.3 Stock ROM, Rooted it, then installed the xRecovery and so on. Flashtool keeps sayin: "Cannot identify your SL. Aborting". So I guess it cant be unlocked, or, if it can, its risky.
Do you know some "locked bootloader roms"?
tristanldc said:
Do you know some "locked bootloader roms"?
Click to expand...
Click to collapse
I know its dangerous unlocking your BL. Try to flash the file i gave you it works with both BL, locked or unlocked

[Q] I think i bricked my phone

hi i need help. so here is what happened. i have a sprint htc one max. i unlocked the bootloader and rooted the phone. flashed a custom rom on it and had it flashed to page plus and no problems with the phone. when i saw that it could be unlocked. i tried the steps to relock my bootloader and then things when wrong. i relocked my bootloader but now i am stuck in bootloader mode and cant enter recovery. i have been reading in the forums but nothing seems to be a clear solution to me. i tried to install the RUU from sprint and it wont load. i get ERROR 133 (if i am not mistaken) and when i try to find the phone on adb it wont show up. so now i am hoping someone can guide me or show me what i need to do. if not i guess i have a new fancy paper weight hahaha. thanks guys appreciate it.
luisdelvalle1 said:
hi i need help. so here is what happened. i have a sprint htc one max. i unlocked the bootloader and rooted the phone. flashed a custom rom on it and had it flashed to page plus and no problems with the phone. when i saw that it could be unlocked. i tried the steps to relock my bootloader and then things when wrong. i relocked my bootloader but now i am stuck in bootloader mode and cant enter recovery. i have been reading in the forums but nothing seems to be a clear solution to me. i tried to install the RUU from sprint and it wont load. i get ERROR 133 (if i am not mistaken) and when i try to find the phone on adb it wont show up. so now i am hoping someone can guide me or show me what i need to do. if not i guess i have a new fancy paper weight hahaha. thanks guys appreciate it.
Click to expand...
Click to collapse
Does bootloader mode work? If so, you can use the ruu zip on an sd card to fix your phone. You can follow the instructions in my vzw ruu thread for option to. Just make sure you use the Sprint zip instead of mine.
dottat said:
Does bootloader mode work? If so, you can use the ruu zip on an sd card to fix your phone. You can follow the instructions in my vzw ruu thread for option to. Just make sure you use the Sprint zip instead of mine.
Click to expand...
Click to collapse
do you have a link to see how to make the zip file. i was searching and i dont know if i am overlooking it.
:cyclops:
dude. from bootloader, reflash unlock_code.bin you had from htc
then you can flash recovery and restore a backup
japodude said:
dude. from bootloader, reflash unlock_code.bin you had from htc
then you can flash recovery and restore a backup
Click to expand...
Click to collapse
thanks that did it. appreciate it.now i need to see how to unlock the sim on this thing hahaha. ok well now off to read some more
luisdelvalle1 said:
thanks that did it. appreciate it.now i need to see how to unlock the sim on this thing hahaha. ok well now off to read some more
Click to expand...
Click to collapse
i think when you soff it unlocks radio for anysim (i think) otherwise ebay does htc unlock code for a pound!

After relocking bootloader,what????

Hello to all of you! I have international model H960A 32gb. It is rooted from day 3. I have some broblems with wifi not turning on.I have to send it to LG here in Greece to check it out. I relocked once the bootloader and have erased the operation system.Is there any way to inject to the phone its original recovery and an original firmware at this point?? If yes,can you share the way??? Thank you all in advance!!
you should know if you unlock or relock the bootloader the phone does a factory reset...
i dont know what you mean by "inject the original recovery and firmware" since you could unlock it again and flash the KDZ you want on it!
- People here think we are Jesus to take care of every minimal thing would happen to their phones and we dont have to say nothing, if you do sh*t with your phone thats your fault since in every thread "how to..." have a disclaimer and the rules to follow, if you do it wrong is because you are lazy to follow the steps.
by now you are on your own, i say what you need to do, you can unlock the bootloader again and flash whatever you want: KDZ or TWRP.
Before you start attacking me,please make sure that you understand what are you reading... I don t ask for any Jesus to save me. I am just asking an answer. It would be more polite to tell me that you simply don t know what i am talking about,or just DONT ANSWER TH F***** question.
Thank you all again. For getting this more clear .... The question is how can i flash an official rom and recovery AFTER i have relocked my bootloader. I need the bootloader to stay locked.
gioarvdv said:
Before you start attacking me,please make sure that you understand what are you reading... I don t ask for any Jesus to save me. I am just asking an answer. It would be more polite to tell me that you simply don t know what i am talking about,or just DONT ANSWER TH F***** question.
Thank you all again. For getting this more clear .... The question is how can i flash an official rom and recovery AFTER i have relocked my bootloader. I need the bootloader to stay locked.
Click to expand...
Click to collapse
i dont think there is a way to flash without unlocking bootloader.cant you just flash stock rom with unlocked bootloader and then just relock it?it will reset everything again.stock rom and recovery.
jass65 said:
i dont think there is a way to flash without unlocking bootloader.cant you just flash stock rom with unlocked bootloader and then just relock it?it will reset everything again.stock rom and recovery.
Click to expand...
Click to collapse
Issue resolved. Thank you all. How to: 1.relocked bootloader. 2. Enter in download mode. 3. Start LGUP. 4. Started with refurbish option but an error was coming up. 5. Tried upgrade option and worked fine.
P.S: before starting LGUP i installed and run UPPERCUT.
Thank you all again.

Categories

Resources