Dear supporter i have few qty of HTC DESIRE ,,it becomes restart as POWER ON ,,, i have HARD RESET ,,,but still same its S.ON means not rooted as yet ,,, so i just want to flash it by ORIGNAL RUU FILEs from SHIPPED ROM ,,, but before downloading ,,,iam totaly confuse wanna to know which RUU should i download enable to flash my phone ,,,,,,because i know if i flash it by wrong RUU files ,,,its bootloader will get destroy and i dont want to do this mistake ,,,What should i see in phone and what should i see in RUU file ? if anybody can guide me in proper manner ,, i would be realy apreciated.
waiting for kind replies.
Related
Hi,
I thought I did enough reading to hard-spl my g4 cingular 8125 but i guess not...
Anyways, I did the hard-spl and everything seemed to go smoothly. Then I went ahead and tried to flash the Touch no Evil ROM (http://forum.xda-developers.com/showthread.php?t=327215).
About 4% into the flash I got error 262: update error. Now the device is stuck on bootloader with IPL 2.21.0001 and SPL 2.21.01ip. Plugging in the usb shows "USB" at the bottom left corner of the wizard's screen but I cant detect the device in windows. Since I cant detect the device, I cant remove hard-spl and attempt to reflash using soft-spl the stock 8125 spl and rom.
Anyone have any suggestions on how to remedy the situation? Or did I just brick this thing
Any help or even linking to the right threads would be appreciated. A couple hours of searching didnt yield anything but maybe im looking for the wrong things...
Thanks,
Anushian
EDIT: More searching yielded this: http://forum.xda-developers.com/showthread.php?t=276963&highlight=stuck+bootloader
Basically use MTTY_updateROM.exe to dump the ROM onto an SD Card and restore from that? I dont have a card on me so Id rather get some input before going to buy one just to try this... Mainly, I need to know if the hard-spl still renders the unit CID unlocked and capable of preforming this method.
hello
i had the same problem and it seems its the Ruu i guess you used the ruu thats in touch no evil rom but your device is ok use the wizard love rom http://forum.xda-developers.com/showthread.php?t=298613 and then flash again with the tool that said in g4.7 and it works dont flash to original rom because it contains isp spl and can brick your phone i hope it helps.
Solidus_k said:
hello
i had the same problem and it seems its the Ruu i guess you used the ruu thats in touch no evil rom but your device is ok use the wizard love rom http://forum.xda-developers.com/showthread.php?t=298613 and then flash again with the tool that said in g4.7 and it works dont flash to original rom because it contains isp spl and can brick your phone i hope it helps.
Click to expand...
Click to collapse
Hi and thanks for the tip. I tried wiz love rom flash again and this time it worked (didnt recognize usb first time?). Anyways it went up to 6% and died since the battery died. Im going to just get a standalone charger and charge it and try again. Will probably take 2 weeks to get here though...
My main question is, based on the info provided, is the phone bricked or is it still repairable with a reflash? I didnt find much info related to hard-spl and restoring with the SD methods besides just that the phone must be CID unlocked...
Thanks!
if you have hard spl then you have cid unlock so your phone is ok if you flash wizard love rom use the ruu thats is in wizard love folder dont flash any official rom, try to change from computer or stop running other programs while flashing and your device is not bricked unless you intall official rom.
Solidus_k said:
if you have hard spl then you have cid unlock so your phone is ok if you flash wizard love rom use the ruu thats is in wizard love folder dont flash any official rom, try to change from computer or stop running other programs while flashing and your device is not bricked unless you intall official rom.
Click to expand...
Click to collapse
Hi Solidus_k,
Thanks so much for the info, much appreciated. I'll give it a go again as soon as my charger arrives in the mail since my batteries dead. Just wish you didnt have to boot into winmo to charge...
Anushian
HELP i cant uninstall HSPL2 on my HD2, i have tried:
Extracting RUU_signed.nbh changing it to leo_img.nbh, LEO_IMG.nbh, LEOIMG.nbg, LEO_IMG.nbh.
Changing my Shipped rom.
I read if you put it to ***.0000 it takes it of but i can't install the most recent Rom 3.16
Any help ??
Ok. I dont know if it matters but you have to change the filename to leoimg.nbh
You have to write it exactly the way i wrote it. You can only change to the latest rom you want to via hspl, the usb method or only if your device is compactible with the rom using the leoimg.nbh method. If your device doesn't update despite this, it only means that rom is not meant for your phone. I hope this helps you.
Got it working ( : thank you for your help ! !
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
miagii said:
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
Click to expand...
Click to collapse
How are you trying to flash, direct from fle to phone from PC or using y split cable and goldcard? maybe to go back you need to put the ModeID file in te 1.09 folder, like you initially did in the 1.30 folder. See this post
Im flashing directly and i know the Tutorial u gave my i was already on the 1.30 NoDo Update and then i made and Downgrade to 1.09 then to 1.28 Original T-Mobile Rom.
Now i want Update again to 1.30
but if try to Flash the 1.09 Rom ( itried it with three diffrent ModelID.fig) then i get 244 Invalid Model ID
i also have this problem.
i loaded this rom onto my htc : RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22.24.50.09U_by_ansar
i didnt know that it has the tmobile branding within so i wanted to debrand with the 1.09.but now i always get error 244 invalid model id.isnt there any solution for this?
You have probably updated the SPL with your updates, so the first thing you'll need to do is downgrade that, and then install the ROM again. You can search in ansar posts for how to downgrade the SPL.
ok thx for help,i will try
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
diaemus9 said:
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196183
Just try this. If it still has an error, it is probably a big problem.
You have to install this like any other ROM and after installation don't worry about the phone not starting up. Just install RSPL/HSPL and flash any ROM you would like.
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
diaemus9 said:
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
Click to expand...
Click to collapse
Have you tried a hard reset before trying to flash ? And have you installed RSPL/HSPL and what version of it ?
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
diaemus9 said:
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
Click to expand...
Click to collapse
In order to install hspl you need to run rspl first, so if rspl doesent run you can't install hspl... You've probably flashed some really bad ROM.
The last thin that i can suggest is to try to flash some older ROM or the rom that now is in the phone and then try to flash something else... but i doubt it will work without RSPL/HSPL
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
diaemus9 said:
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
Click to expand...
Click to collapse
Try downloading another version of RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
These are the ones that i have used. If this doesent help idk what to do next...
anyway if you cannot install HSPL then its not possible to install a ROM.
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
diaemus9 said:
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
Click to expand...
Click to collapse
Actually you've probably made a mistake when you flashed it back... and you've used a bad ROM... so try to ask some more experienced member, maybe they can help... sorry that i couldn't.
no,its not ur fault ,thx for ur effort.
looks like no one can help though,already searched the whole internet.n no one else responses here
Hey guys,
I seriously need some help, reverting my international HOX+ back to stock, as I am going to sell it.
My main problem is, that i have an o2 germany one, for that it seems to be impossible to get any suitable RUU
I am able to unlock / relock the bootloader, flash custom or stock recovery, flash any custom rom... not a problem.
But I'm stuck with the order of the steps! When I flash a stock rom (1.17.401.xx), my next step should be flashing stock recovery and then relock bootloader, right? I did so and got a security warning at bootloader and it seems, that there is no rom left on the phone.
How do I trick this, to relock, use stock rec. and stock rom?
Thanks for any help!!!
AW: Need help, going back to stock
you need the correct RUU for O2 brandings
yep. any news, where to get it?
thought, there might be a workaround...
I think there is no ruu atm.
I'll have a look for it.
AW: Need help, going back to stock
That would be very nice!
Sent via Xperia Z
The only o2 ruu is this one:
http://www.androidfiles.org/ruu/sec...Radio_3.1204.167.31_release_289474_signed.exe
Based on your informations, you need a ruu for a german phone.
It doesn't matter that there is "UK" in the name.
The United Kingdoms are in europe, like germany.
Give it a try and tell me if it has worked or not.
If it doesn't work, open your Bootloader and flash an custom recovery/kernel/rom and wait until there's a dumped o2 ruu.
the_brad said:
But I'm stuck with the order of the steps!
Click to expand...
Click to collapse
1.Go into the bootloader and make sure your phone is connected to your computer.
2.Relock your bootloader, using the cmd (Windows) or the terminal (Linux).
3.You make it with "fastboot oem lock".
4.Run the "ruu.exe" as administrator and let it work.
5.Drink a coffee and wait until it's done.
AW: Need help, going back to stock
Ok, many thanks for that!
I already tried that ruu, but maybe my fault was, I did not lock the bootloader, before.
Will try that, later this evening and give feedback
Sent via Xperia Z
You're welcome!
If you got any problems, send me a private message and we try to solve the problem.
AW: Need help, going back to stock
Doesn't work gives me bootloader error. Stops after updating signature...
Sent via Xperia Z
what about running ruu, extracting rom.zip and flashing this one? ruu could be 1.17.401 for example!?
will this work or result in a brick? is this method still possible on one x series? my evo 3d provided this while using a zip named to pc86img.zip (or very similar :cyclops
edit: if possible, will the phone check cid in the zip?
pretty much same here, except I am on O2 UK, and a higher version than the RUU available so it doesn't work, so frustrating, just want to go back to stock
alternate method would be: flashing a nandroid backup of a stock rom.
problem: don't own one
Is anybody out there, who can provide me a full backup of rom 1.17.207.xx with cid 02___102 o2 germany?
that would save my weekend, guys!
Hi.
I have the same problem but am on o2_UK i cant get back to stock.Doesn't mater whatever RUU i try is the same.
I have 1.17.401.1 cid02__001 and really badly need to go on stock ROM
Any help would be great.
Thanks a lot in advance.
hey folks im stuck I flashed the wrong recovery to my u8687 I cant get the fastboot purple screen to come on (yes I unlocked bootloader)
and im pretty sure which recovery I want flash but cant get fastboot to recognize my device and I forget which drivers I installed for the thing.
so either get the Huawei-u8687-wind firmware are if someone can pls point me in the right direction. thx
fyi if anyone can help with getting this firmware:
HUAWEI_U8687_firmware(U8687,Android_4.0,V100R001C113B968,Canada-Wind,05011SPV).zip
hey did u ever get anywhere with ur problem ???? how did u unlock the bootloader....