can someone help me, I have a problem in the boot of my tablet I was going through the app from system / app folder tablet of my brother for my tablet using root explorer
so that gave error (com.kernel) and my tablet resetou alone and now does not want to leave the boot screen already tried everything I tried to change the rom uberoid more with the tablet not read the post he's the boot screen of foston more after it goes straight to the boot android and already tried using wipe rom did not work out and already tried using the live suit most always q I hold the home button and the reset button clamped for 2 seconds the pc only recognizes the driver does not appear more if I really want to format the tablet someone here can help me
Related
Hi, i have tablet Prestigio Multipad 7.0 HD with model name PMP3970B_DUO. When i tested root device with ZhuoDashi 2.3.9, program at 75% fail , because tablet stuck. I´m reset tablet with PWR button. When I turn on tablet, still with starting logo. When I start tablet wit PWR and VOL+ (recovery menu), nothing happens and still with starting logo. When the tablet connects to the PC with PWR and VOL-, PC finds him as an unknown device. Charging works normally.
Tablet is therefore in a state of half-brick. Does anyone have an idea as to how to go back to its original state?
System: Android JB 4.1.1 build: PMP3970B-20130505_v1.0.7.
EDIT: When I connect the tablet to a PC with the VOL-and joins as M3 Chip, when I World_Cup driver for AML flash, but I do not FW, which I'd recorded, if anyone should IMG file, it should go over to fix it. Unfortunately, this is a new device and on the web Prestigio is a rear-FW download.
Nothing? And when I have second this tablet with root, when I save ROM with this?
Sorry, my english is bad.
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Hangman07 said:
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Click to expand...
Click to collapse
Have you got any luck with fixing?
Similar thing happened to me, and i ended up using aml flash tool (it failed at 53%).
After that, i was able to get into recovery but updating with fw from prestigio site didn't help.
It starts upgrading process over and over...
Same problem
Pls help!
Only service. In service find HW error...
Please help, Android noob here.
I purchased this Zync Dual 7 Plus(Haipad HD 7 Zync Edition) (Zync Z930 Plus in the Manual) and became fascinated by the world of Android OS. My problem is I downloaded Chainfire 3D app from Playstore as recommended by my friends. After installing, it require a reboot so I restarted the tablet and then I'm stuck on the boot screen logo. I manage to get to the recovery page using ADB reboot recovery command but my tablet only has a power button. There's no physical volume buttons everywhere I looked so there's no way I can reach the "wipe data/factory reset" option. ADB Devices command can detect the devices but it is giving me weird serial number as 0123456789ABCDEF, Fastboot is not detecting the device. USB Keyboard and touch functions are not responding when I'm in Recovery page.
What I have done so far...
I've read several solutions and one of them is to flash the tablet using the ROM provided by Zync support. DL it and open the RockChip Batch Tool but the tool is not detecting my device so I can't upgrade.
Also DL the LiveSuitPack 1.07 but also, It is not detecting the device and from the instruction given, you need to hold volume button again which I don't have.
Please Help by providing easy step by step process. Thanks in advance
i have the same problem..it just happened this morning. have you find any solutions so far.. please help me
my zync dual 7 plus hang on startup..last night it said the launcher had stopped working and i reboot it... and now this thing happen please help
zync dual 7 reboot
guys, how is the reboot problem for your dual 7? solved?
Help
how to flashing zync dual 7 plus. the table don't have vol key. anyone can help?
Manage to factory reset
Guys, I bring the good news here.
I manage to factory reset the Dual 7 PLus which have stuck at that damn ZYＮＣ before. what you need is flash command ur devices into e3 recovery by using "adb reboot recovery"(please refer to google for that). once you device start to reboot after u enter the command, straight connect it to a external keyboard via male to female input. then u can control up and down in the e3 recovery mode by using arrows button in keyboard. I manage to do it with dc power supply connected. choose wipe/ factory reset. wipe all data. then reboot. unplug the keyboard and you will have a new dual 7 with no zync logo again. GOod Luck guys.:victory:
Wait for the external keyboard
Thanks.. i will try. i dont have external keyboard now.
Hi xAthena... may I ask you how long it takes for the haipad zync to charge? 'coz I'm planning to buy one. thanks )
THANK YOU
Hey guys I have stuck in trouble, let me explain. I tried to update my zync z930 tablet in following method:
1. Download JB zip file from zync website
2. Extract zip file and copy firmware.bin file outside folder in SD card, also copied other bin files in SD card.
3. Restart tab with power+volume up key
4. In bios menu I select "upgrade with format data and cache area"
5. Tablet detect firware and start upgrading
6. Update complete in 2 minutes
When I restart tablet its just show tablet logo abd nothing happening after that.. Though I am able to enter in bios menu, I am attaching screshot here.. Pls help me to get my tab back.
Sent from my C2305 using XDA Free mobile app
this tablet is starting to annoy me a bit now but i want it to work
I installed cwm using this guide here
http://forum.xda-developers.com/showthread.php?t=2189640
I used the running from system method
then i turned it off to boot to recovery using vol+ and power, but nothing
Then i tried yanking the power button many times, and it turned on but gets stuck on android logo
So i need to boot to cwm but how
I have the a13 with 10 partitons
Any help is much needed thanks
If i can somehow wipe cache/data somehow it may work
How can i get adb to work in this state
hasan291 said:
If i can somehow wipe cache/data somehow it may work
How can i get adb to work in this state
Click to expand...
Click to collapse
I got it working by searching around and flashing this file with livesuit
https://drive.google.com/file/d/0B9yfbmrBB-rBb1oxc2NlTzZYTDg/edit?usp=sharing
Close thread please admin:laugh:
Hi everybody.
as mentioned before ive received an padfone2 who would not boot annymore.
no asus logo nothing. only the navigation buttons lit when touched.
what you need for the solution is a pc/ laptop with linux mint (or anny other version) installed.
first i had to open the device cause the flatcable for the screen was lose.
solved it the it booted with te asus logo and the dotted circle and stayed this way..
ive connected the padfone to my linux machine booted the padfone showing all partitions. 4 or 5 wouldnt mount.
ive repaired them from a console typing "fsck /dev/sda(number of partitions who failed to mount)" and press enter. (be sure you type the correct number only not mounted partitions should be done.)
after that partions (exept one) repaired perfect.
after that ive downloaded the latest firmware for my region and copied it to the 25gb partition. stil in linux
rebooted the padfone into basic recovery (ive got a screen for choosing to go to recovery or stay in download mode) trying every possible option with the power button and the volme keys
choose install from cache and there it was the wwe version of the rom ive copied (ive choose the latest version for my region (kitkat)
and it began to install (first it installed after reboot it seemed to bootloop but again the install screen with the belly open android emerged.
rebooted again and booted into the first install screen (updating 3 of 120 or something like that) now it works like a charm.
im happy, customer happy, perhaps this makes more people happy
succes
henk_j said:
Hi everybody.
as mentioned before ive received an padfone2 who would not boot annymore.
no asus logo nothing. only the navigation buttons lit when touched.
what you need for the solution is a pc/ laptop with linux mint (or anny other version) installed.
first i had to open the device cause the flatcable for the screen was lose.
solved it the it booted with te asus logo and the dotted circle and stayed this way..
ive connected the padfone to my linux machine booted the padfone showing all partitions. 4 or 5 wouldnt mount.
ive repaired them from a console typing "fsck /dev/sda(number of partitions who failed to mount)" and press enter. (be sure you type the correct number only not mounted partitions should be done.)
after that partions (exept one) repaired perfect.
after that ive downloaded the latest firmware for my region and copied it to the 25gb partition. stil in linux
rebooted the padfone into basic recovery (ive got a screen for choosing to go to recovery or stay in download mode) trying every possible option with the power button and the volme keys
choose install from cache and there it was the wwe version of the rom ive copied (ive choose the latest version for my region (kitkat)
and it began to install (first it installed after reboot it seemed to bootloop but again the install screen with the belly open android emerged.
rebooted again and booted into the first install screen (updating 3 of 120 or something like that) now it works like a charm.
im happy, customer happy, perhaps this makes more people happy
succes
Click to expand...
Click to collapse
Dear Sir!
I have the common problem of Asus Padfone: Continuous boot loop.
Everytime I do a factory reset it works great, after one or two days it starts the boot loop.
From what I red in internet during these weeks it seems to be a problem of the partitions, as one of them i loosing its memory.
Can you please explain in more details your approach?
Commands in Linux? How to repair a partition, etc?
I am new in Linux but willing to learn.
Thank you for your understanding.
The comand is in the instruction type it as root in a terminal
I just tried installing new Firmware on my Tablet and i can't boot into Recovery Mode or Fastboot Mode, when i do so the Tablet just restarts, if i leave it alone about 20 minutes the Vonino logo pops up but nothing happens after that, the tablet just restarts. The tablet always needs to be connected to a wall charger for some weird reason, i cannot connect it to my Laptop because the tablet won't boot. I do have these files that i created before installing the Firmware because i knew it wasn't going to go well: userdata_20180204_231637.backup, voninobackup.ab, LinuxKernel, StockRecovery. I also have a folder where the whole entire data from the Tablet is backed up, i also have the old Firmware backed up but i can't restore it. If anyone knows how to fix this i will do a video on how to fix it on my YouTube Channel since i'm not the only one with this problem.
XroKill said:
I just tried installing new Firmware on my Tablet and i can't boot into Recovery Mode or Fastboot Mode, when i do so the Tablet just restarts, if i leave it alone about 20 minutes the Vonino logo pops up but nothing happens after that, the tablet just restarts. The tablet always needs to be connected to a wall charger for some weird reason, i cannot connect it to my Laptop because the tablet won't boot. I do have these files that i created before installing the Firmware because i knew it wasn't going to go well: userdata_20180204_231637.backup, voninobackup.ab, LinuxKernel, StockRecovery. I also have a folder where the whole entire data from the Tablet is backed up, i also have the old Firmware backed up but i can't restore it. If anyone knows how to fix this i will do a video on how to fix it on my YouTube Channel since i'm not the only one with this problem.
Click to expand...
Click to collapse
Any news here ? Did you manage to fix the tablet?