can someone help me, I have a problem in the boot of my tablet I was going through the app from system / app folder tablet of my brother for my tablet using root explorer
so that gave error (com.kernel) and my tablet resetou alone and now does not want to leave the boot screen already tried everything I tried to change the rom uberoid more with the tablet not read the post he's the boot screen of foston more after it goes straight to the boot android and already tried using wipe rom did not work out and already tried using the live suit most always q I hold the home button and the reset button clamped for 2 seconds the pc only recognizes the driver does not appear more if I really want to format the tablet someone here can help me
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
i fixed it using these steps, Thanks
1. You will need the Stock Rooted ROM: [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2… | LG G Pad 10.1 | XDA Forums
2. Stock Recovery Image: https://onedrive.live.com/redir?resi...int=file,img
[OPTIONAL]
- I downloaded the USB Driver suite so I can make sure it all connects and works, this really is optional, but I would HIGHLY suggest it!
LG Software & Firmware | LG U.S.A
- I also download this nifty tool called DP Tools by danielpinto8zz6 over at XDA. This just made it a lot easier to reboot to recovery and all that fun stuff.
[Tool][Win] DP TOOLS - Manage your LG device | LG G Pad 10.1 | XDA Forums
[MANUAL RECOVERY]
If you do not want to install the drivers and DP Tools, you can reboot to recovery using the following method:
1. Power OFF your device and unplug from USB
2. Press Vol-Down + Power and HOLD until you see the LG Logo (will only take a couple seconds)
3. Let go of the POWER button ONLY
4. Keep holding the Vol-Down, then also press Power + Vol-Up (so you should now be holding ALL 3 BUTTONS)
5. Wait for recovery mode to start and you can let go of the buttons
[THE PROCESS]
1. Copy the ROM and Recovery Image to to SD Card or Internal Storage of your device
2. Reboot to Recovery
3. Wipe, Wipe, Wipe
4. Flash the Stock Rooted ROM
5. Reboot and set up your device far enough for you to get into the Play Store and download an App
6. Download Flashify: https://play.google.com/store/apps/d...llner.flashify
7. Launch the app and flash your stock recovery
8. DO NOT REBOOT YET (however, if you do reboot, it's really not an issue)
9. Open the Super User app that is already installed
10. Go into Settings and then find the In-Root (Uninstall) option and you will get a warning that Root will be removed
11. Complete the instructions on the screen and you are now back to stock
[TROUBLESHOOTING]
- If SU will not uninstall and just hangs, restart the device and try again
- If the ROM starts acting strange, Factory Restore (this did not happen to me, but happened to a friends and reset fixed it all)
Please let me know if anyone has any questions!!
Thanks!
Quick reply to this message Reply
zfk110 said:
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
Click to expand...
Click to collapse
just flash ur stock rom
Good day,
New here. I have a problem with my BLU studio G HD. I tried to root it with kingo root(which completed at 100%) and when it reboot it never get past the boot screen. I entered the recovery mode and wipe cache, I tried getting a ROM which was in the format .PAC which could only be opened by Research flash. However when I connect the phone to the PC it recognizes the serial port for like a second and cuts off and charges the device. Can anyone assist me? The next step was if I can locate a ROM that I can put on my SD Card and load it from my recovery mode.
Please assist. Thanks in advance:crying:
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.