Good day,
New here. I have a problem with my BLU studio G HD. I tried to root it with kingo root(which completed at 100%) and when it reboot it never get past the boot screen. I entered the recovery mode and wipe cache, I tried getting a ROM which was in the format .PAC which could only be opened by Research flash. However when I connect the phone to the PC it recognizes the serial port for like a second and cuts off and charges the device. Can anyone assist me? The next step was if I can locate a ROM that I can put on my SD Card and load it from my recovery mode.
Please assist. Thanks in advance:crying:
Related
Please help, Android noob here.
I purchased this Zync Dual 7 Plus(Haipad HD 7 Zync Edition) (Zync Z930 Plus in the Manual) and became fascinated by the world of Android OS. My problem is I downloaded Chainfire 3D app from Playstore as recommended by my friends. After installing, it require a reboot so I restarted the tablet and then I'm stuck on the boot screen logo. I manage to get to the recovery page using ADB reboot recovery command but my tablet only has a power button. There's no physical volume buttons everywhere I looked so there's no way I can reach the "wipe data/factory reset" option. ADB Devices command can detect the devices but it is giving me weird serial number as 0123456789ABCDEF, Fastboot is not detecting the device. USB Keyboard and touch functions are not responding when I'm in Recovery page.
What I have done so far...
I've read several solutions and one of them is to flash the tablet using the ROM provided by Zync support. DL it and open the RockChip Batch Tool but the tool is not detecting my device so I can't upgrade.
Also DL the LiveSuitPack 1.07 but also, It is not detecting the device and from the instruction given, you need to hold volume button again which I don't have.
Please Help by providing easy step by step process. Thanks in advance
i have the same problem..it just happened this morning. have you find any solutions so far.. please help me
my zync dual 7 plus hang on startup..last night it said the launcher had stopped working and i reboot it... and now this thing happen please help
zync dual 7 reboot
guys, how is the reboot problem for your dual 7? solved?
Help
how to flashing zync dual 7 plus. the table don't have vol key. anyone can help?
Manage to factory reset
Guys, I bring the good news here.
I manage to factory reset the Dual 7 PLus which have stuck at that damn ZYＮＣ before. what you need is flash command ur devices into e3 recovery by using "adb reboot recovery"(please refer to google for that). once you device start to reboot after u enter the command, straight connect it to a external keyboard via male to female input. then u can control up and down in the e3 recovery mode by using arrows button in keyboard. I manage to do it with dc power supply connected. choose wipe/ factory reset. wipe all data. then reboot. unplug the keyboard and you will have a new dual 7 with no zync logo again. GOod Luck guys.:victory:
Wait for the external keyboard
Thanks.. i will try. i dont have external keyboard now.
Hi xAthena... may I ask you how long it takes for the haipad zync to charge? 'coz I'm planning to buy one. thanks )
THANK YOU
Hey guys I have stuck in trouble, let me explain. I tried to update my zync z930 tablet in following method:
1. Download JB zip file from zync website
2. Extract zip file and copy firmware.bin file outside folder in SD card, also copied other bin files in SD card.
3. Restart tab with power+volume up key
4. In bios menu I select "upgrade with format data and cache area"
5. Tablet detect firware and start upgrading
6. Update complete in 2 minutes
When I restart tablet its just show tablet logo abd nothing happening after that.. Though I am able to enter in bios menu, I am attaching screshot here.. Pls help me to get my tab back.
Sent from my C2305 using XDA Free mobile app
I have a a Lenovo Yoga 8 B6000. Im running 4.4.2 and after some fiddling, used Vroot to root, and subsequently went through some arduous steps to finally remove the Vroot and replace with SuperSu. Life was good. Then I got a little careless when removing some of the bloatware and ended up with a constant boot-loop problem. And of course, no backup. (whoops!)
I have been researching this the past 2 days for a workable solution and am reaching out for some more refined assistance.
Here is what I have done thus far:
When pressing Power + VOL+/- I get to the initial recovery menu which gave me: Recovery, Fastboot, and Normal. After selecting the "Recovery" mode, I get the "No Command", after which I pressed the power button one more time and got into the English recovery menu. I show
Android System Recovery <3e>
B6000_A442_001_026_141117_WW_WIFI
Reboot System Now
Apply Update from ADB
Apply Update from SDCard
Apply update from Cache
Wipe data/Factory Reset
Wipe Cache Partition
I attempted to wipe the cache, followed by Wipe data/Factory reset. Following this procedure, I remained in the boot loop.
I installed ADB Flashtool drivers for WIN7 and attempted to use flash tool which was also suggested on this site. I got a 4.2.2 ROM "B6000_A422_000_059_131219_WW_WIFI" from a russian lenovo forum site to use with the flash tool and because the tablet continues in boot loop when starting, there was no loading of the ROM from that method.
I put the rom on an SD card and went into recovery mode. The ROM was not visible by the recovery menu (By that I guess the Apply Update from SDCard is looking for a specific file extension, which is not present).
I may have tried a few other things which are not popping into my head at the moment.
Im kind of at a loss and looking for any ideas from the gurus out there on how I might be able to get any kind of ROM to flash onto my B6000 and getting it up and running again.
Thanks
I was able to successfully fix the Yoga 8 tablet by using the instructions here:
//aluk4rd.wordpress.com/2014/09/08/an-easy-guide-for-restoring-your-stock-4-2-2-firmware-on-your-lenovo-yoga-tablets-8-and-10-b6000-and-b8000/
The trickiest part was getting the Mediatek driver installed. I use a dual booting MAC with WIN7 and sometimes there are some kwirks when operating in WIN7. However, the results of the instructions brought my tablet back to life, as well as downgrading to 4.2.2
Hi engineer2loggie,
How did you get that firmware? Can you tell where can I download it?
Thanks.
has anybody found a solution to this? im stuck with the same problem atm
so i have a blu dash music 4.0 and one day i got a encryption unsuccessful error and i clicked reset but it did not boot into recovery mode it booted in to android with a ton of errors in fact i was unable to get to the home-screen so i rebooted to recovery mode and did a hard reset but when i rebooted the same thing happened i tried it five more time and then it wont let me into recovery mode and is in a boot loop it shows the BLU logo for 5-15 seconds then reboots to the same thing i know i have dev options enabled but i don't know if i have usb debuging enabled or if my bootloder is unlocked i cant get it to connect to the computer with the battery but if i take the battery out and plug it in to my computer and press the vol buttons it will connect to the computer for like 5 seconds i have tried re flashing using this tut: "how to use smart phone flash tool to flash any blu smartphone" but it failed
please help thanks
Hey guys,
So really in need of a little help. My OnePlus X started acting strange when it refused to take charge when it was booted into OS (Lineage). However, I noticed that if the phone was off, it would boot immediately upon connecting a cable. So it seemed as if nothing was wrong with the port or the cable (tried various cables and chargers). A little more digging revealed that the phone charges in Fastboot mode. Anyway, I decided to factory reset it and for some reason it was stuck in a boot loop.
I then tried to restore back to stock using Mega Unbrick Guide which worked in the past. Now my problem is that its stuck in fastboot, wont boot into the OS. I can boot to the recovery and fastboot. In recovery when I choose Install from local, i get no browser to search the SD for zip files, nor does the phone detect for me to use adb sideload.
Any ideas as to why this is so?
Thanks!
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.