Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
It's dead. Now go and get a Nexus 7.
scream4cheese said:
It's dead. Now go and get a Nexus 7.
Click to expand...
Click to collapse
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have d same tablet n same problem.... do u know how to flash it completely.... and wer can i find firmware for this tablet????
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
annur said:
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
Click to expand...
Click to collapse
I have modified a firmware image for my tablet that works. When i find the time i will upload it
and post the link in order for you to try it. I had similar problem but i found an image that almost worked.
I had shifted screen, g-sensor worked and touch screen sort of worked.
When image is up, check it out. It might work for you too.
Update : here is the link to the modified firmware that suited my tablet : http : / / uploading.com/423e8db1/a13test-7z
Sorry for breaking the rules with the link. (you can assemble it i believe)
Hope this is what you were looking for. Enjoy!
Dead android tab
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Dear friend,
I have the same problem that my wintouch Q75S tablet was dead after I flashed wrong ROM using live suite 1.05.
Please help me if you found any solution.
Thanks,
Lakmal
behnam59 said:
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
Click to expand...
Click to collapse
I get the same problem, just one stuff, you don't have to remove the battery, just power on the tablet even don't see any thing and just wait until the battery is empty, and use livesuite to flash your tablet normally.
wish it will help
:crying::crying::crying:
It is motherboard problem due to dirty Flashing
Now motherboard need to repair
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
I have a Zeki tb1082b. The touchscreen is not responding. I can use a mouse. Tablet will not enter recovery mode by holding vol- and tapping reset on back. (procedure on Zeki site) I can erase and recover from settings menu. I have done this 2x and still not working. The back of the tablet says TB1082B FID BN. About tablet screen say TB1082 (don't know if this matters) running 4.0.3. The box says that is what it suppose to be running. I have tried using LiveSuit but I can not get it into recovery mode. Step 5 says get it into update mode. I do not know if this is the same thing. There is no damage to the screen or anywhere on the tablet. I tried to update from settings it comes up with an error and says no update available.
Please help.
Thanks.
I followed the post for How to flash zeki tb1082b. When I use Live suite, it keeps telling me that I have an "invalid image file". I downloaded it from the link. Can anyone tell me why this keeps popping up?
Hi Everybody
My little sister mess up my phone, and after too many pattern attempts, now it ask for email (Google account) and password, but the problem is the phone isn't connected to Internet, WiFi and Mobile data Is OFF. Every time that i try the email/pass it says invalid email or password.
First, i tried to HARD RESET my tablet, by trying to enter to the RECOVERY MODE, by Pressing the - and ON/OFF button, but all i have is just the RED TRIANGLE and the laying robot, but not the MENU. so i cannot DO the a factory reset here.
Now the only way to connect my tablet to the computer is to connect it in a RECOVERY mode. and use the ADB Commands to do a hard reset/ or a flash ... etc, but all the commands doesn't work, i think because my tablet is in a recovery mode.
Then i think the solution is the answer to this question : is there any way to turn ON the WiFi in this situation?
Maybe not.
So I tried to flash a ROM, from MEMUP site, i have the .IMG file, LIVESUIT Installed, and i installed the drivers too. but the problem here is when i start flashing the ROM, the flash stops in 3 or 4%. i don't why !!!!!!
SlidePad 704CET
3700020512725
i hope you help me as fast you can.
thanks everybody
:crying:
Hey Can Someone Could Help Me Please :crying:
Same problem
I have de same problem.
If someone help...?
Thanks.
i don't know if you have solved your problem.. in case of, you should flash your tablet with this file https://docs.google.com/uc?export=download&confirm=no_antivirus&id=0B6rq4vWhNtL0SFJLOHEtZDdhWU0
it worked for me!
equinoks said:
i don't know if you have solved your problem.. in case of, you should flash your tablet with this file
it worked for me!
Click to expand...
Click to collapse
Hello, how i can flash this model, no VOL +/- btn. How enter in recovery mode?
Any news about how to enter in recovery mode?
Thanks
can someone help me, I have a problem in the boot of my tablet I was going through the app from system / app folder tablet of my brother for my tablet using root explorer
so that gave error (com.kernel) and my tablet resetou alone and now does not want to leave the boot screen already tried everything I tried to change the rom uberoid more with the tablet not read the post he's the boot screen of foston more after it goes straight to the boot android and already tried using wipe rom did not work out and already tried using the live suit most always q I hold the home button and the reset button clamped for 2 seconds the pc only recognizes the driver does not appear more if I really want to format the tablet someone here can help me
Good day Sirs!
Please help me, yesterday i try to install PhilZ Touch.img using Flashify. installation went ok, but when ask to reboot, only shows acer's logo and after 5secs turn off, try Power + Vol up for recovery, shows the option for SD IMAGE, FASTBOOT, CLEAN. when i click any of that device will shutdown. tried also flash tools. but when i connect my device computer will start to recognize the tablet but after 2 seconds it will shutdown, flash tools will halt.
is anyone know how or what can i do to flash the tablet.
tablet: Acer Iconia B1A71
F/W : RV05RC05
JB 4.1.2
Thanks
Same problem here friend, please someone could help?
Rafael Bzinho said:
Same problem here friend, please someone could help?
Click to expand...
Click to collapse
I tried to search everywhere but no luck, go on shop the tech says i need to change motherboard, but i say no., the price of the motherboard is almost same price of a second hand acer Iconia B1-721. so better get a second hand one with 1Gb of RAM than changing Motherboard same price with 512Mb RAM. Goodluck to you.